#1


# Drive cycle for manual and automatic transmission
# =================================================
#
# driveCycleDat[:,3]
#
#  where:
#    column 1 - time [s]
#    column 2 - desired speed [km/h]
#    column 3 - gear for manual transmission
#                  = 0: No gear (idle)
#                  > 0: Forward gear
#                  < 0: Rear gear
#               gear for automatic transmission
#                  = 0: gearboxMode = Neutral
#                  > 0: gearboxMode = Drive (select appropriate forward gear)
#                  < 0: gearboxMode = Rear (select appropriate rear gear)
#
# The line below starting with "# Heading:" is used as automatic heading for
# a plot with PowerTrain.DriverEnvironments.DriveCycles.plotDriveCycle
#
# Heading: Ciclo Sort1 come da specifiche BMB
double Cycle(49,3)
     00.00    0.00   0
     05.39    20.0   0
     17.22    20.0   0
     24.17    0.00   0
     44.17    0.00   0
     54.99    30.0   0
     68.37    30.0   0
     78.79    0.00   0
     98.79    0.00   0
    116.71    40.0   0
    120.60    40.0   0
    134.49    0.00   0
    150.00    0.00   0

    155.39    20.0   0
    167.22    20.0   0
    174.17    0.00   0
    194.17    0.00   0
    204.99    30.0   0
    218.37    30.0   0
    228.79    0.00   0
    248.79    0.00   0
    266.71    40.0   0
    270.60    40.0   0
    284.49    0.00   0
    300.00    0.00   0

    305.39    20.0   0
    317.22    20.0   0
    324.17    0.00   0
    344.17    0.00   0
    354.99    30.0   0
    368.37    30.0   0
    378.79    0.00   0
    398.79    0.00   0
    416.71    40.0   0
    420.60    40.0   0
    434.49    0.00   0
    450.00    0.00   0

    455.39    20.0   0
    467.22    20.0   0
    474.17    0.00   0
    494.17    0.00   0
    504.99    30.0   0
    518.37    30.0   0
    528.79    0.00   0
    548.79    0.00   0
    566.71    40.0   0
    570.60    40.0   0
    584.49    0.00   0
    600.00    0.00   0