id	summary	reporter	owner	description	type	status	priority	milestone	component	version	resolution	keywords	cc
1183	Compilation of Fourbar Multibody model fails without errors	Per Östlund	Per Östlund	"The following model is flattened, but DAE.lower2 fails (possibly due to components with ET_COMPLEX type?). This causes the compiler to fail without any error messages (except for the standard ""Error encountered!"" and such).

This model does not seem to be MSL 3.0 compatible, and needs MSL 2.2 to flatten.

{{{
model Fourbar1
  ModelicaAdditions.MultiBody.Parts.InertialSystem IS;
  ModelicaAdditions.MultiBody.Parts.FrameTranslation FT(r = {3, -0.5,0});
  Modelica.Blocks.Sources.Constant C;
  ModelicaAdditions.MultiBody.Joints.Revolute R;
  ModelicaAdditions.MultiBody.Joints.Revolute R2;
  ModelicaAdditions.MultiBody.Joints.Revolute R3;
  Modelica.Mechanics.Rotational.Speed S;
  ModelicaAdditions.MultiBody.Parts.CylinderBody CB(r = {0,1,0});
  ModelicaAdditions.MultiBody.Parts.CylinderBody CB2(r = {3,0,0});
  ModelicaAdditions.MultiBody.Parts.CylinderBody Cb3(r = {0, -1.5,0});
  ModelicaAdditions.MultiBody.CutJoints.Revolute2Dloop CR;
equation
  connect(C.y,S.w_ref);
  connect(S.flange_b,R.axis);
  connect(IS.frame_b,R.frame_a);
  connect(R.frame_b,CB.frame_a);
  connect(CB.frame_b,R2.frame_a);
  connect(R2.frame_b,CB2.frame_a);
  connect(CB2.frame_b,R3.frame_a);
  connect(R3.frame_b,Cb3.frame_a);
  connect(IS.frame_b,FT.frame_a);
  connect(FT.frame_b,CR.frame_a);
  connect(CR.frame_b,Cb3.frame_b);
end Fourbar1;
}}}"	defect	closed	normal			1.5.0RC2	fixed		Per Östlund