Timeline
2012-12-04:
- 15:13 Ticket #1811 (Frontend - Wrong equation count in Fluid source model with zero ports) closed by
- fixed: Works with OMC r14198
- 11:28 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Yes, the old instantiation is still used for typing when using the …
- 11:25 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- The last comment of #1405 says the issue is fixed by "+d=sCodeInst" …
- 11:11 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Duplicate of #1405.
- 10:46 Ticket #1970 (Backend - Multibody Visualizers type error) created by
- The model contained in the attached file outputs a type mismatch error …
- 09:28 Ticket #1964 (Backend - Bound Parameter Expression unfixed) closed by
- fixed: solved in r14225
- 08:50 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
- The optimization method (e.g. nelder_mead_ex) is meaningless if the …
- 08:43 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
- If I run the system with +d=solveinitialsystem, I get no error and a …
- 08:35 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
-
Cc changed
I ran the model with Visual Studio to debug the model a bit more. It …
2012-12-03:
- 18:10 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) closed by
- fixed
- 18:09 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) closed by
- fixed
- 17:13 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) updated by
- Hopefully fixed in r14209.
- 17:13 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) updated by
- Hopefully fixed in r14209.
- 16:34 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) updated by
- Same as bug #1969. The fix in r14047 is wrong. I should do TSUB …
- 16:33 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) reopened by
- 16:32 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) updated by
-
Status changed
This is a duplicate of #1946. It seems my fix of it was a bit wrong. … - 16:14 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) created by
- According to the msl example […] the following model does not …
- 14:35 Ticket #1968 (Backend - Modelica.Media.Examples.Tests.MediaTestModels.Water.WaterIF97OnePhase_p ...) updated by
- Hi, It seems that somewhere SimCode.SES_NONLINEAR.crefs are getting a …
- 13:38 Ticket #1968 (Backend - Modelica.Media.Examples.Tests.MediaTestModels.Water.WaterIF97OnePhase_p ...) created by
- The Model …
- 13:00 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) created by
- Hi, this is one of the last models from MultiBody (not counting …
- 04:05 Ticket #1966 (Build Environment - Add all the ModelicaTest example models to the OpenModelica testsuite) created by
- Would be really good to add all the tests (not only MultiBody) from …
- 04:01 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Cc, Owner changed
- 03:59 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Status, Owner changed
2012-12-02:
- 23:32 Ticket #1955 (Backend - Parameter values lost) closed by
- fixed: I will close this bug as you found the workaround of using .mat files. …
- 18:01 Ticket #1965 (Backend - TriggeredSampler model doesn't switch properly) updated by
-
Status, Owner changed
Is raised by the same issue as #1959. - 17:57 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
-
Keywords, Status, Owner changed
The issue with sawtooth is fixed in r14197. The other problem with … - 17:51 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) closed by
- fixed: fixed in r14197.
- 16:45 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
-
Summary changed
Ok. I'll see if I can add the Evaluate=true for these. - 15:33 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- Yes in the comment of the Variable, see also …
- 15:16 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- These are not the problems we face. My fix does this, basically as …
- 15:07 Ticket #1965 (Backend - TriggeredSampler model doesn't switch properly) created by
- In the model TestTriggeredSampler1 a TriggeredSampler is triggered …
- 13:30 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- I do believe it is because (previously?) the backend would be unable …
- 13:19 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- So if the frontend evaluate a parameter it would be good to mark it as …
- 13:10 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- It is allowed to evaluate any parameter you like in a Modelica …
- 12:48 Ticket #1964 (Backend - Bound Parameter Expression unfixed) created by
- The following model is not possible to simulate with the current …
- 04:44 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- Unfortunately the fix breaks too many models and we cannot fix this …
2012-12-01:
- 20:40 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- Hi again, It seems we do constant evaluation for all subscripts that …
- 17:14 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
- and both models stopped working with MSL3.2.1, because the models …
- 16:35 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
-
Keywords, Status changed
Yes, #1959 and #1960 belongs together. Both relies on same when … - 15:50 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
- This might also be connected with #1959 where it said that "Yesterday …
- 15:39 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
-
Status changed
Hi, I guess T.StrengthMap is a package constant. We replace package … - 13:21 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
-
Status, Owner changed
It seems to be connected to event handling. Internally the pulse … - 12:31 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) created by
- In the model Modelica.Electrical.Digital.Examples.DFFREG the frontend …
- 10:58 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
- Sure. I'm using MSL 3.2.1, OpenModelica 1.9.0 beta 2, r14139 as of …
2012-11-30:
- 22:35 Ticket #1728 (Backend - findDiscreteEquation failed for algorithm) updated by
-
Status, Owner changed
- 22:33 Ticket #1648 (Backend - package array constants not handeld in functions) updated by
-
Status, Owner, Component, Cc changed
- 22:32 Ticket #1643 (Backend - FMU is not re-initialized after set continuous state) updated by
-
Status, Owner, Component, Cc changed
- 22:32 Ticket #1489 (Backend - if equation with initial() as condition causes rightless error) updated by
-
Status, Owner, Component, Cc changed
- 22:31 Ticket #1653 (Run-time - Simulation uses wrong results from singular liniear system for calculation.) updated by
-
Owner, Cc, Component changed
- 17:54 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) closed by
- fixed: This seems to be fixed now. Christian, can you enable the test for it …
- 16:23 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Should work in r14168 but did not run tests.
- 16:12 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Ok, this is a bit weird... I got the following array in the code using …
- 15:59 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- I've reran it again with Dymola and MSL 3.2.1 and I got the same …
- 15:45 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Did you use the exact same version of MSL? It might be that the trunk …
- 15:43 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
-
Keywords, Component changed
As far as I see it's not a runtime issue. Just the enumeration to … - 15:36 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- I'm already working on debugging this so hopefully I'll fix it soon.
- 15:02 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Summary changed
- 14:46 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) created by
- The attached model is a mixed fluid/multibody model build with MSL …
- 14:30 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
-
Status, Owner changed
- 14:29 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) created by
- Hi, while comparing results I found that …
- 09:34 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Martin will be at the MDM (Modelica Design Meeting) all of next week, …
- 08:52 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) created by
- In some cases the Modelica.blocks.sources.pulse model has wrong …
- 07:35 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- I attached a test for the problem. It is got to do with final …
- 04:07 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
- Hi, Can you add a bit more info on this: What MSL are you using? What …
2012-11-29:
- 16:12 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) created by
- In the attached model the input is a const 4-vector, the index runs …
- 12:30 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- As far as I can see until now this is a bug on our part as we call …
2012-11-28:
- 13:52 Ticket #1949 (Code Generation - Support partial function evaluation) updated by
-
Status, Owner changed
Hm, these look like partially evaluated functions. I don't know if … - 13:50 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- I'll look into this as it need more investigation. Looks like maybe …
- 12:17 Ticket #1955 (Backend - Parameter values lost) updated by
- Yes, I found them already. Thank you very much! This is much better …
- 12:05 Ticket #1955 (Backend - Parameter values lost) updated by
-
Status, Owner changed
- 12:04 Ticket #1955 (Backend - Parameter values lost) updated by
- I can confirm that all parameters and variables are in the .mat file …
- 11:58 Ticket #1955 (Backend - Parameter values lost) updated by
- A colleague made a reader for mat files when OpenModelica switched to …
- 11:46 Ticket #1955 (Backend - Parameter values lost) updated by
- Ouch, it seems we don't write the parameters to the .csv or .plt …
- 11:23 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- If you call with +d=execstat you can see that it does not crash during …
- 11:18 Ticket #1955 (Backend - Parameter values lost) updated by
- I understand that the xml file is not actually a result file, but the …
- 11:13 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Hi, Ok. It seems the SCode->SCode translation does something wrong in …
- 11:10 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) updated by
- I think so. I mean we should test only complete models and maybe some …
- 11:05 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) updated by
- Shall I then remove this test from the test suite?
- 11:03 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- OK, I now looked a bit more into it. The results are fundamentally …
- 10:54 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) updated by
- Hi, I don't think that non-complete models are of interest. For …
- 10:47 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) created by
- Hi, in OpenModelica the model …
- 10:32 Ticket #1955 (Backend - Parameter values lost) updated by
- To read the values after the simulation you don't use the XML file. …
- 10:29 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Because there are only 3 Variables could you please try to remove one …
- 10:17 Ticket #1955 (Backend - Parameter values lost) updated by
- Inside.A1 in init.xml: […]
- 10:08 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- This is expected. The code is legal but written in such a way that a …
- 09:47 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) created by
- When running the MSL 3.2.1 testsuite the omc crashes at …
- 09:42 Ticket #1955 (Backend - Parameter values lost) updated by
- I guess this comes from alias removal. What is the XML info on Inside.A1?
- 09:34 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) created by
- I am testing the new instantiation with MSL 3.2.1 and noted a strange …
- 07:49 Ticket #1955 (Backend - Parameter values lost) created by
- There is a problem with the following model and …
2012-11-27:
- 14:42 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Hack for the models in BackendDAECreate.lowerVarkind […]
- 14:41 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Modelica.Magnetic.FluxTubes.Examples.SaturatedInductor …
- 12:55 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Modelica.Fluid.Examples.InverseParameterization.mos …
- 12:12 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Modelica.Fluid.Examples.PumpingSystem - StateSelect.prefer …
Note:
See TracTimeline
for information about the timeline view.
