Timeline
2013-09-03:
- 19:59 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Use r17053. I have fixed the MDT issue. The compiler was forced to use …
- 17:19 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- I don't think the reading of parameters is slow. Maybe the operations …
- 15:36 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Yes :)
- 15:17 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- But can it be that these general differences between the systems …
- 14:56 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Oh, and file operations in particular are slower on Windows.
- 14:52 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- The results from my OMEdit are on a slow Ubuntu laptop. OpenModelica …
- 14:48 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Ok, the clearing lets the model simulate. By the way, are there any …
- 14:19 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- OK. I got the same problem. For now as a work around you can send …
- 14:04 Ticket #2269 (OMEdit - multiline warnings in the message browser) closed by
- fixed: Fixed in r17050.
- 13:44 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- New omc process, no command line parameters, and the failure remains. …
- 13:29 Ticket #2314 (Frontend - No source info for duplicate enumeration literal error) closed by
- fixed: Fixed in r17049.
- 11:53 WikiStart edited by
- (diff)
- 10:47 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Make sure you also kill all omc processes. MDT has the ability to …
- 10:44 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Have you checked in Window->Preferences->Modelica if Command line …
- 10:33 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Hi Adrian, i updated to your version, and tried once more. …
- 08:08 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Hi, I now made a MDT 0.7.29 which does not set +g=MetaModelica by …
2013-09-02:
- 08:41 Ticket #2332 (Run-time - Thread-safe runtime system) updated by
- An fast and dirty solution for external C functions would be to add an …
- 07:13 Ticket #2332 (Run-time - Thread-safe runtime system) updated by
-
Description changed
- 07:12 Ticket #2332 (Run-time - Thread-safe runtime system) updated by
-
pthread_rwlock_tto lock most global variables (we write to them …
2013-09-01:
- 13:10 Ticket #2335 (Code Generation - Look into pattern-matching efficiency) updated by
-
Description changed
- 13:10 Ticket #2335 (Code Generation - Look into pattern-matching efficiency) created by
- Currently, matchcontinue generates code like: […] It should be …
- 13:08 Ticket #2332 (Run-time - Thread-safe runtime system) updated by
- Thread-local storage possible to mimic globals
- 10:07 Ticket #2334 (Run-time - terminal + assert causes segfault) created by
- A model such as this causes a segfault during simulation: […]
- 08:23 Ticket #2333 (OMEdit - File name in the Variable Broweser of OMEDIT) created by
- When writing the output file name OMEdit shows the full name. For …
2013-08-31:
- 15:58 Ticket #2332 (Run-time - Thread-safe runtime system) updated by
-
Status, Owner changed
- 15:57 Ticket #2332 (Run-time - Thread-safe runtime system) created by
- This is a collection of non-threadsafe parts that we probably should …
- 12:20 Ticket #2322 (MetaModelica - Fix bootstrapping on GCC 4.8 / clang) updated by
- -fno-stack-protector is a good idea for libgc if we want to use …
- 10:24 Ticket #2322 (MetaModelica - Fix bootstrapping on GCC 4.8 / clang) updated by
- gcc-4.6 works with straight -O2. gcc-4.7 needs same flags as 4.8.
- 10:15 Ticket #2322 (MetaModelica - Fix bootstrapping on GCC 4.8 / clang) updated by
- clang-3.2 works with -O2 without changes
- 10:09 Ticket #2322 (MetaModelica - Fix bootstrapping on GCC 4.8 / clang) updated by
- Works with gcc-4.8: - -O1 -fno-tree-ch - -O2 -fno-tree-ch …
- 09:03 Ticket #2322 (MetaModelica - Fix bootstrapping on GCC 4.8 / clang) updated by
-
Status, Owner changed
2013-08-30:
- 19:09 Ticket #2320 (OMEdit - Syntax Highlithing in Omedit) closed by
- fixed: Fixed in r16954.
- 16:36 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- Ok, i think you are right. I removed the +g=MetaModelica, and started …
- 16:13 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- You remove +g=MetaModelica from Window->Preferences->Modelica and …
- 15:56 Ticket #2331 (OMOptim - patch to compile -r 16951) updated by
-
Owner, Component, Description changed
- 15:54 Ticket #2331 (OMOptim - patch to compile -r 16951) updated by
-
Description changed
- 15:45 Ticket #2331 (OMOptim - patch to compile -r 16951) created by
- After some error like: […] and a function with 2 arguments being …
- 12:23 Ticket #2330 (Backend - Avoid duplicate code for tearing) closed by
- invalid: There is no duplicated code in the tearing section. The method …
- 12:18 Ticket #2330 (Backend - Avoid duplicate code for tearing) updated by
-
Description changed
- 11:54 Ticket #2330 (Backend - Avoid duplicate code for tearing) created by
- Hi, I've seen that some tearing algorithms now appear multiple times …
- 11:38 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- How do i do that?
- 11:35 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- You need to set MDT to use Modelica instead of MetaModelica
- 11:34 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- What about the MDT failure? I've attached the error output (it is …
- 11:02 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
-
Owner, Component changed
- 11:01 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- I just take OMEdit as it comes, open the the model, and run it. No …
- 08:53 Ticket #2328 (Backend - backenddaeinfo statistics counts wrong no. of single equations) updated by
-
Type changed
Well, I agree. This is actually more an enhancement than a defect. … - 08:32 Ticket #2328 (Backend - backenddaeinfo statistics counts wrong no. of single equations) updated by
- - feel free to change it. Primarily it was informative for compiler …
- 08:09 Ticket #2328 (Backend - backenddaeinfo statistics counts wrong no. of single equations) updated by
-
Cc, Status, Owner changed
I agree. Various strong component types are collapsed for this dump. … - 07:49 Ticket #2329 (Frontend - fails to flatten model using partial derivatives) created by
- The frontend fails to flatten model using partial derivative: […] …
2013-08-29:
- 12:48 Ticket #2328 (Backend - backenddaeinfo statistics counts wrong no. of single equations) created by
- Example: testsuite/simulation/modelica/tearing/Tearing2-1.mos After …
- 10:36 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) reopened by
- This is reverted in r16929 and will be reintroduced after the next …
- 06:06 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
-
Owner, Component changed
How are you running this model? On …
2013-08-28:
- 18:09 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
- I used OMEdit (rev. 16935) to simulate. The MDT even fails to simulate …
- 17:57 Ticket #2327 (OMEdit - Reading from an external file is very slow) created by
- I would like to have OpenModelica read some parameters from a file …
- 07:22 Ticket #2326 (Run-time - default start and nominal values) updated by
-
Priority, Type changed
2013-08-27:
- 20:25 Ticket #2326 (Run-time - default start and nominal values) updated by
- I agree, but please, don't forget nominal values which are …
- 19:57 Ticket #2326 (Run-time - default start and nominal values) updated by
- It depends. We can warn about it and try some heuristic. We can talk …
- 19:50 Ticket #2326 (Run-time - default start and nominal values) updated by
- In that case, the modeller should set a start-value
- 19:49 Ticket #2326 (Run-time - default start and nominal values) updated by
- Sometimes there is a problem with zero start values (division by zero, …
- 18:38 Ticket #2326 (Run-time - default start and nominal values) updated by
- There is always a default start-value set in Modelica. This is 0.0 for …
- 16:55 Ticket #2326 (Run-time - default start and nominal values) created by
- I think it is better, if min and max attributes are …
- 13:09 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- Okay, that sounds reasonable. So I will reintroduce …
- 13:04 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- Because it breaks backwards compatibility (and we are about to make a …
- 12:02 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- Why do we not split the flags into "debug" and "experimantal"? I think …
- 11:22 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- The help-text says experimental features, too (now). The majority of …
- 10:42 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- As the help text says, the debug flags are for debugging purpose. …
- 10:35 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- If you think so, you can revert r16924 and change the debug-flag …
- 10:26 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- Well, experimental features belong with the debugging flags. The other …
- 10:18 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- Well, I agree that it should be always enabled per default. Anyway …
- 10:11 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
- Don't agree :) It's something that should always be done, or be a …
- 09:37 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) closed by
- fixed: r16924
- 09:21 Ticket #2040 (Backend - Simcode scales badly for large linear systems) updated by
-
Status, Owner changed
- 08:50 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) updated by
-
Status, Owner changed
- 08:18 Ticket #2325 (Command Prompt Environment - doLinearTearing should not appear in the debug flags) created by
- The help text for the debugflaggs define those as: "The debug flag …
Note:
See TracTimeline
for information about the timeline view.
