Timeline
2014-01-09:
- 16:01 Ticket #2505 (Frontend - Code generation fails for a simple model) updated by
- Thanks for that fix! Thus, much more PNlib tests are working (see r18613).
- 13:51 Ticket #2505 (Frontend - Code generation fails for a simple model) closed by
- fixed: Fixed in r18612.
- 13:04 Ticket #2505 (Frontend - Code generation fails for a simple model) updated by
-
Owner, Component changed
I'll have a look at this, as it seems to be a front-end issue. We … - 13:01 Ticket #2505 (Frontend - Code generation fails for a simple model) updated by
- The question is if we should remove the for loops which are from 1 to …
- 12:59 Ticket #2505 (Frontend - Code generation fails for a simple model) updated by
- The flattened code of the model looks like: […]
- 12:54 Ticket #2505 (Frontend - Code generation fails for a simple model) updated by
-
Status, Owner, Component changed
Yes, Adrian is right, the corresponding variable is removed from the … - 12:24 Ticket #2080 (Backend - Mechanics.MultiBody.Examples.Constraints.PrismaticJoint) updated by
-
Status, Owner, Component, Summary changed
Currently that model simulates, but with a different result(wrong?) as … - 11:33 Ticket #2534 (Run-time - simulation results. How to handle the first data point?) updated by
- I think case b. is better, since the event is in the model equations …
- 11:31 Ticket #2534 (Run-time - simulation results. How to handle the first data point?) updated by
-
Status, Owner changed
I propose we should change our result files to case a, because the … - 11:26 Ticket #2534 (Run-time - simulation results. How to handle the first data point?) updated by
- This problem arose, because I like to compare simulation results to …
- 11:20 Ticket #2534 (Run-time - simulation results. How to handle the first data point?) created by
- What about the following example? […] What should be the simulation …
- 10:07 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) updated by
- There is a new build available from r18607: …
- 09:44 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) updated by
- The check I made was under my PC working on Win8.1. The OM version …
2014-01-08:
- 21:36 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) updated by
- I have fixed the inherited parameters in r18602. Everything should …
- 18:48 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) updated by
- Are you sure? I just installed r18590 on virtual box Windows 7 and I …
- 18:13 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) reopened by
- Sorry for reopening this. I've checked the behaviour of component …
- 16:58 Ticket #2533 (Interactive Environment - plot error in OMShell) updated by
- This issue occurred in r17628
- 16:56 Ticket #2533 (Interactive Environment - plot error in OMShell) created by
- When using OMShell, I get the following error: Error: Class plot not …
- 13:31 Ticket #2480 (Run-time - Documentation of integration algorithms) updated by
- Is there any progress?
- 12:43 Ticket #2528 (Code Generation - block activationCon does not work properly) closed by
- fixed: Fixed in r18592.
- 11:27 Ticket #2528 (Code Generation - block activationCon does not work properly) updated by
-
Component changed
This bug is related to the handling of zero crossings. The generated … - 10:46 Ticket #2528 (Code Generation - block activationCon does not work properly) updated by
- I reduced the example above to the following: […] […] This …
- 09:55 Ticket #2532 (Frontend - Incorrect multilevel matrix slicing/indexing) updated by
-
Status, Owner changed
- 09:44 Ticket #2532 (Frontend - Incorrect multilevel matrix slicing/indexing) created by
- Instantiating Matrix: […] gives: […] which is clearly not …
2014-01-07:
- 19:26 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) closed by
- fixed: I like the idea of not showing the final parameters. Fixed in r18584.
- 18:15 Ticket #2526 (Build Environment - Libraries are downloaded twice) closed by
- fixed
- 18:15 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
-
Status, Owner changed
- 17:47 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
- Looks like it is working now. Thanks,
- 16:45 Ticket #2531 (OMEdit - Omedit should not let the user change final parameters (r18573)) created by
- Consider the model Modelica.Blocks.Sources.CombiTimeTable If, while …
- 16:45 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
-
Or try
port upgrade outdatednow. The path should be updated. - 16:38 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
- I'll fix the path to the correct one. You can start by doing `port …
- 16:35 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
- You almost got it. It appears to build and install fine. But, when I …
- 15:30 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) closed by
- fixed
- 15:28 Ticket #2530 (Backend - translation error of model in comment1: "model MatricesExp....") updated by
- I get a different error (the bug described in the messages above is a …
- 15:25 Ticket #2529 (Frontend - Vectorization of unknown dimensions fails) closed by
- fixed: Fixed in r18580.
- 15:11 Ticket #2530 (Backend - translation error of model in comment1: "model MatricesExp....") updated by
- Here is a model: […]
- 15:09 Ticket #2530 (Backend - translation error of model in comment1: "model MatricesExp....") created by
- When trying to instantiate Modelica.Math.exp in MSL 3.2.1, one gets …
- 15:00 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
- Saved 19MB on removing unnecessary libraries. And macports should now …
- 13:12 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
- I had looked through a few folders that appeared to be the same, but …
- 12:59 Ticket #2529 (Frontend - Vectorization of unknown dimensions fails) updated by
- As far as I know Mahder worked on something similar to this (checking …
- 12:57 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- I think is better to close this bug and open a new one about final …
- 12:25 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- Hi all, Thank you for addressing and solving lightning fast this …
- 10:26 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- It is working in OpenModelica1.9.1Nightly r18573 Great fix - Thanks! …
- 09:58 Ticket #2529 (Frontend - Vectorization of unknown dimensions fails) updated by
-
Description changed
- 09:57 Ticket #2529 (Frontend - Vectorization of unknown dimensions fails) created by
- Vectorization fails for the following case: […]
- 08:55 Ticket #2526 (Build Environment - Libraries are downloaded twice) updated by
- The libraries included in the openmodelica tarball has only a little …
- 00:51 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- I did a small test and it seems like OMEdit handles your new changes …
2014-01-06:
- 21:34 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
-
Owner, Component changed
Committed r18573. Note that the new components in Dialog annotation … - 21:06 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- I think it will work. Just commit your changes and if it doesn't work …
- 21:00 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- Does this look ok? The problem was that we evaluated these annotations …
- 20:01 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- Good. Now we're getting somewhere :) I'll have a look.
- 19:57 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- Run the attached script with M.mo, […] I can't group components …
- 19:51 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- That is not true. As far as I know we do instantiate if there are …
- 19:46 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- Yeah i mean we can't query it. We do have an API for it, […] but …
- 19:39 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
- Parsing is OK, otherwise you could not load the model. I guess you …
- 16:25 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
-
Status, Owner, Component changed
It is because OMC is not able to parse such annotations, […] - 14:11 Ticket #2524 (OMEdit - Erroneous parameter group identification in OMEDIT) updated by
-
Priority, Owner, Component changed
- 11:58 Ticket #2528 (Code Generation - block activationCon does not work properly) created by
-
The following model is not working properly.
activation.active…
2014-01-04:
- 12:08 Ticket #2527 (OMEdit - OMEdit crash while component creation in a package) created by
- - OS: XP 3 - OMEDIT r18569 1.9.1 - package with separate files (but …
2014-01-03:
- 23:11 Ticket #2526 (Build Environment - Libraries are downloaded twice) created by
- A little while back the openmodelicalibraries was broken off from …
Note:
See TracTimeline
for information about the timeline view.
