Timeline
2014-07-23:
- 21:21 Ticket #2758 (*unknown* - Buildings library: ffd_miami branch not loading) closed by
- worksforme
- 21:21 Ticket #2758 (*unknown* - Buildings library: ffd_miami branch not loading) updated by
-
Status, Owner changed
- 21:20 Ticket #2758 (*unknown* - Buildings library: ffd_miami branch not loading) updated by
- The code in question is: […] Which should not parse (the …
- 21:04 Ticket #2758 (*unknown* - Buildings library: ffd_miami branch not loading) created by
- Disclaimer: I'm a true beginner and I'm probably doing a few things …
- 12:09 Ticket #2757 (Frontend - double sum fail) updated by
-
Component changed
I believe this is a front-end issue. b should be the scalar sum … - 11:22 Ticket #2757 (Frontend - double sum fail) created by
- the model: […] fail with the error: Error: Too many equations, …
- 10:55 Ticket #2749 (Code Generation - code generation fails for PN model) updated by
- People always say that, and they are usually wrong ;)
- 09:55 Ticket #2749 (Code Generation - code generation fails for PN model) updated by
- No, OPENMODELICAHOME seems to be correct: […]
- 09:51 Ticket #2749 (Code Generation - code generation fails for PN model) updated by
- I'm guessing you have OPENMODELICAHOME set to some bad directory on Windows
- 09:22 Ticket #2749 (Code Generation - code generation fails for PN model) updated by
- I will add a test for it once it is working for me. Unfortunately, it …
2014-07-22:
- 19:51 Ticket #2749 (Code Generation - code generation fails for PN model) closed by
- fixed: Fixed in r21592 and r21597. Model compiles fine now. However you …
- 17:28 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) closed by
- fixed: I have removed replaceLoopDependentCrefs and updated the code …
2014-07-21:
- 12:05 Ticket #2752 (Code Generation - code generation errors for zero crossings) updated by
-
Cc changed
2014-07-18:
- 22:18 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) updated by
-
Description changed
- 15:51 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) created by
- If I run (using OM r20199) "gridTest21" of the enclosed package …
- 09:30 Ticket #2755 (Backend - Pantelides fails in a small model) updated by
-
Component changed
The pre-optimization module removeSimpleEquations fails before the … - 09:28 Ticket #2754 (Backend - Models that fail with doLinearTearing) updated by
- The coverage test has only brings up one that belongs …
- 09:22 Ticket #2755 (Backend - Pantelides fails in a small model) created by
- I have a class of models for which the following error is issued …
2014-07-17:
- 13:48 Ticket #2140 (Backend - Enable Tearing by default) closed by
- fixed: Enabled linear tearing by default in r21558.
- 13:47 Ticket #1804 (Backend - nonlinear solver failed for torn system) closed by
- fixed: Tearing for Modelica.Electrical.Analog.Examples.CauerLowPassSC fixed …
- 13:45 Ticket #2040 (Backend - Simcode scales badly for large linear systems) closed by
- fixed: Seems to be fixed in meantime, since for N=80: […]
- 13:30 Ticket #2754 (Backend - Models that fail with doLinearTearing) created by
- Since r21558 the following models fails with doLinearTearing: […] …
- 13:21 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) closed by
- fixed: In r21588 I activated doLinearTearing by default and now I've …
- 12:01 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) updated by
- Replying to vwaurich: > Sorry, I expressed myself in a …
- 11:49 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) updated by
- Sorry, I expressed myself in a wrong way. The type is of course the …
- 08:32 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) updated by
- Replying to vwaurich: > Would it be ok to move the …
- 07:20 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) updated by
- The model is singular because the incidenceMatrix is calculated wrong. …
2014-07-16:
- 15:32 Ticket #2753 (*unknown* - Modelica.Utilities.Streams.close not working properly (blocked by omc.exe)) closed by
- wontfix: Use m:newticket. It's a Windows-specific problem that is also related …
- 15:29 Ticket #2753 (*unknown* - Modelica.Utilities.Streams.close not working properly (blocked by omc.exe)) created by
- When I use the Modelica.Utilities.Streams.close(<file>) to close the …
- 11:16 Ticket #2685 (Code Generation - Connector with record fails with code generation issues) updated by
- Replying to vwaurich: > Per, Could you please have a look …
- 11:11 Ticket #2685 (Code Generation - Connector with record fails with code generation issues) updated by
-
Component changed
- 11:11 Ticket #2685 (Code Generation - Connector with record fails with code generation issues) updated by
- Hi, commit [21524] fixed the backend-issue with the wrong number of …
- 11:00 Ticket #2752 (Code Generation - code generation errors for zero crossings) created by
-
foo.simulationproduces code generation errors for zero … - 10:56 Ticket #2749 (Code Generation - code generation fails for PN model) updated by
-
Cc changed
Mahder, please can you have a look? - 09:05 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) updated by
- Replying to vwaurich: > If y has the size of 2, it might …
- 06:58 Ticket #2688 (Backend - Matching fails if ASUB-conversion is disabled) updated by
- If y has the size of 2, it might not be possible to adress index 3 and …
Note:
See TracTimeline
for information about the timeline view.
