Timeline
2015-11-14:
- 17:44 Ticket #3548 (Run-time - Bad memory leak with umfpack) reopened by
- Sorry to reopen this, but I disagree that the leak is caused by …
- 13:57 Ticket #2959 (Frontend - Use of partial, non-redeclared classes is not reported by the front-end) updated by
- This should now be fixed in 91f3526. …
2015-11-13:
- 20:48 Ticket #3531 (Backend - Backend changes from October 27 significantly slow down ...) closed by
- fixed: Thanks!
- 18:20 Ticket #3318 (Interactive Environment - Too many heap sections) updated by
- Today I tried this environment variable GC_Free_SPACE_DIVISOR. At the …
- 13:59 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- Yes, that would be a reasonable explanation for what I observed in Dymola.
- 09:21 Ticket #3558 (OMEdit - A flip horizontal issue) created by
- The enclosed "PULSER" model was created in Dymola. AFAIK it is …
- 08:29 Ticket #3557 (Backend - PreOptModules messes up model) updated by
- It seems that this model covers also another issue. …
- 07:58 Ticket #3557 (Backend - PreOptModules messes up model) updated by
-
Status, Owner changed
This is an issue of the moduleremoveSimpleEquations. I will … - 07:35 Ticket #3557 (Backend - PreOptModules messes up model) created by
- The following model passes the frontend, but some preOptModule messes …
- 05:36 Ticket #3550 (*unknown* - macports build fails) updated by
- Also, I think you need to port selfupdate, because your stable package …
- 05:36 Ticket #3550 (*unknown* - macports build fails) updated by
-
-develis the nightly.
2015-11-12:
- 22:39 Ticket #3550 (*unknown* - macports build fails) updated by
-
port searchdoesn't find a nightly build, only-devel,-release, … - 14:33 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
- Replying to sjoelund.se: > Replying to [comment:12 …
- 13:41 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
- Replying to casella: > For me it should be an error. If a …
- 13:23 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
- Replying to lochel: > Replying to adrpo: > > …
- 11:26 Ticket #3531 (Backend - Backend changes from October 27 significantly slow down ...) updated by
- Replying to rfranke: > After two weeks without solution, …
- 11:17 Ticket #3556 (*unknown* - pseudo loops with function) updated by
- extends of inlining for array protected types include (currently) …
- 11:15 Ticket #3556 (*unknown* - pseudo loops with function) created by
- In the following example […] we have loops of the size 2. By …
- 10:59 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- So the problem is: > There is no guarantee that two different events …
- 10:38 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
-
Replying to adrpo:
>
applyRecommendedOrderingor … - 10:29 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- Replying to sjoelund.se: > The order is already defined, …
- 10:28 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- Modelica specification, section 3.7.3: Event-Related Operators with …
- 10:23 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- If initial() isn’t forbidden. It generates a time event at …
- 09:53 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
-
Replying to sjoelund.se:
Why is
if initial()bad, is it … - 09:35 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- The order is already defined, because they are different phases. One …
- 09:31 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
-
applyRecommendedOrderingorapplyDefaultOrdering - 09:27 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
-
I am not that happy with the name
forceRecommendedOrdering. It … - 09:09 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- Replying to sjoelund.se: > Right? There are two time …
- 09:08 Ticket #3555 (Run-time - Add option to save intermediate values at event iterations to result files?) updated by
- Replying to lochel: I agree that the event logging should …
- 09:00 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- > The equations of a when-clause are active during initialization, if …
- 08:21 Ticket #3555 (Run-time - Add option to save intermediate values at event iterations to result files?) updated by
-
Status, Owner changed
I'm not sure if that need be dumped into the result file. However if … - 08:07 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- Replying to bthiele: > What do you think? I agree with …
- 07:58 Ticket #3554 (Installation program - Installation does not work on Windows) updated by
- The installation is started by an user with admin rights.
- 07:56 Ticket #3554 (Installation program - Installation does not work on Windows) updated by
-
Cc changed
In that case, I guess your user is not an administrator (Adrian or … - 07:55 Ticket #3554 (Installation program - Installation does not work on Windows) updated by
- There was no option to select during the installation.
- 05:53 Ticket #3531 (Backend - Backend changes from October 27 significantly slow down ...) updated by
-
Cc, Priority changed
There is no improvement after your last commits. On contrary, …
2015-11-11:
- 23:29 Ticket #3555 (Run-time - Add option to save intermediate values at event iterations to result files?) created by
- There already exists the option to save values at events. If one has …
- 22:26 Ticket #2928 (Run-time - Event handling at time=startTime) updated by
- At first glance I would expect y=1.0 at t=0.0, but currently …
- 20:40 Ticket #3554 (Installation program - Installation does not work on Windows) updated by
- Did you install OpenModelica "for all users" as admin? Otherwise the …
- 15:21 Ticket #3208 (Command Prompt Environment - default configuration for pre/post optimization modules) updated by
- Replying to lochel: > I will add the functionality to …
- 12:18 Ticket #3475 (FMI - Add support for source code FMU's) closed by
- fixed: Source code FMUs are now supported, platsforms={"x86_64-linux-gnu"}, …
- 10:50 Ticket #3554 (Installation program - Installation does not work on Windows) created by
- I installed OpenModelica 1.9.3 on Windows 7, but when starting …
2015-11-10:
- 18:46 Ticket #3549 (Backend - Evaluation of Clock parameters) closed by
- fixed: Super. The change works. …
- 16:34 Ticket #3548 (Run-time - Bad memory leak with umfpack) closed by
- wontfix: This memory leak is caused by umfpack it self, so I can't fix it here. …
- 15:47 Ticket #3548 (Run-time - Bad memory leak with umfpack) updated by
-
Status changed
- 13:42 Ticket #3553 (Backend - The evalfunc backend module is slow due to removeSimpleEquations) created by
-
The current implementation of the
evalfuncmodule makes one call … - 13:41 Ticket #2588 (Frontend - +modelicaOutput does not work properly.) updated by
-
Status, Owner changed
- 12:40 Ticket #3551 (Interactive Environment - diffModelicaFileListings make the code invalid) closed by
- fixed: Fixed in …
- 12:25 Ticket #3551 (Interactive Environment - diffModelicaFileListings make the code invalid) updated by
-
Status changed
- 12:18 Ticket #2959 (Frontend - Use of partial, non-redeclared classes is not reported by the front-end) updated by
- Hello, I just decided to deinstall OM and use alternative after …
- 11:57 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) updated by
- I always use omc from the command line for testing, not OMEdit, and …
- 11:49 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) updated by
- I'm not sure about this. Maybe it would make sense for OMEdit to clean …
- 11:43 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) updated by
-
Priority changed
- 11:21 Ticket #3549 (Backend - Evaluation of Clock parameters) updated by
- Replying to rfranke: I guess you are experimenting with …
- 10:39 Ticket #3545 (Interactive Environment - listFile returns wrong contents) closed by
- fixed: Fixed in …
- 10:26 Ticket #3545 (Interactive Environment - listFile returns wrong contents) updated by
- I have a fix for this (which might change the testsuite results …
- 10:20 Ticket #3545 (Interactive Environment - listFile returns wrong contents) updated by
-
Status changed
- 09:03 Ticket #3549 (Backend - Evaluation of Clock parameters) updated by
- Replying to rfranke: > gives the Clocks section: > …
- 08:17 Ticket #3550 (*unknown* - macports build fails) updated by
- The 1.9.3 build used to work, but MacPorts has since then released a …
2015-11-09:
- 23:46 Ticket #3549 (Backend - Evaluation of Clock parameters) updated by
- PR279 adds …
- 23:43 Ticket #3552 (Interactive Environment - Complete the implementation of moveClass API) created by
-
The implementation of
moveClassAPI seems incomplete. Also it would … - 23:37 Ticket #3551 (Interactive Environment - diffModelicaFileListings make the code invalid) created by
- If a component has modifier value and we remove it then the code …
- 23:06 Ticket #3549 (Backend - Evaluation of Clock parameters) updated by
-
Status, Owner changed
It seems that parameters get not replaced within the clocks, since … - 22:58 Ticket #3549 (Backend - Evaluation of Clock parameters) updated by
- I think this should get already replaced in the back end.
- 22:53 Ticket #2673 (Run-time - OMEdit does not import initial conditions correctly) updated by
- Replying to casella: > Not done yet... Consider this test …
- 21:01 Ticket #3550 (*unknown* - macports build fails) created by
-
Using
port upgrade outdatedfailed to build `openmodelica @1.9.3 … - 20:31 Ticket #3549 (Backend - Evaluation of Clock parameters) updated by
-
Cc changed
- 19:19 Ticket #3549 (Backend - Evaluation of Clock parameters) created by
- The following model has the evaluated parameter dt to parameterize its …
- 18:27 Ticket #3548 (Run-time - Bad memory leak with umfpack) updated by
-
Status, Owner changed
- 18:26 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
-
Replying to sjoelund.se:
> Also,
when initial()is … - 18:14 Ticket #3531 (Backend - Backend changes from October 27 significantly slow down ...) updated by
- The issues is force inlining in […] with the combination …
- 17:35 Ticket #3548 (Run-time - Bad memory leak with umfpack) updated by
- One more data point: With default solver and stopTime=20: ==2332== …
- 17:29 Ticket #3548 (Run-time - Bad memory leak with umfpack) created by
- When solving with -ls=umfpack, a memory leak quickly grows as the …
- 15:57 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
- ok, you were faster than me. I just wanted to ask if the first model …
- 15:53 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
-
Also,
when initial()is stupid and I see no reason to use it over … - 15:53 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
- Spec says: > Clarified that initial() can only be used in a restricted …
- 15:38 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
- Replying to bthiele: > For me it is a counterintuitive …
- 15:29 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
- Yes, I found that, too. But my expectation was that it would also work …
- 14:40 Ticket #3547 (Initialization - Initial event is not propagated as expected) updated by
- That's what I expect as result. Just the second when clause is active …
- 14:07 Ticket #3547 (Initialization - Initial event is not propagated as expected) created by
-
Simulation of the model below results into the end values
v2=1as … - 13:41 Ticket #3546 (Optimization - optimization progress (Ipopt output) in XML format) updated by
-
Cc changed
- 13:29 Ticket #3546 (Optimization - optimization progress (Ipopt output) in XML format) updated by
-
Cc changed
- 13:28 Ticket #3531 (Backend - Backend changes from October 27 significantly slow down ...) updated by
-
Cc changed
- 12:55 Ticket #3546 (Optimization - optimization progress (Ipopt output) in XML format) updated by
-
If you want the log as XML, why don't you use
-logFormat=xml? - 12:24 Ticket #3546 (Optimization - optimization progress (Ipopt output) in XML format) created by
- Running Dynamic optimization using 2optimize(modelName, stopTime=0.5, …
- 00:37 Ticket #3512 (Backend - improve solveSimpleEquation) updated by
-
Cc changed
Note:
See TracTimeline
for information about the timeline view.
