Timeline
2012-11-30:
- 22:35 Ticket #1728 (Backend - findDiscreteEquation failed for algorithm) updated by
-
Status, Owner changed
- 22:33 Ticket #1648 (Backend - package array constants not handeld in functions) updated by
-
Status, Owner, Component, Cc changed
- 22:32 Ticket #1643 (Backend - FMU is not re-initialized after set continuous state) updated by
-
Status, Owner, Component, Cc changed
- 22:32 Ticket #1489 (Backend - if equation with initial() as condition causes rightless error) updated by
-
Status, Owner, Component, Cc changed
- 22:31 Ticket #1653 (Run-time - Simulation uses wrong results from singular liniear system for calculation.) updated by
-
Owner, Cc, Component changed
- 17:54 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) closed by
- fixed: This seems to be fixed now. Christian, can you enable the test for it …
- 16:23 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Should work in r14168 but did not run tests.
- 16:12 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Ok, this is a bit weird... I got the following array in the code using …
- 15:59 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- I've reran it again with Dymola and MSL 3.2.1 and I got the same …
- 15:45 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Did you use the exact same version of MSL? It might be that the trunk …
- 15:43 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
-
Keywords, Component changed
As far as I see it's not a runtime issue. Just the enumeration to … - 15:36 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- I'm already working on debugging this so hopefully I'll fix it soon.
- 15:02 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Summary changed
- 14:46 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) created by
- The attached model is a mixed fluid/multibody model build with MSL …
- 14:30 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
-
Status, Owner changed
- 14:29 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) created by
- Hi, while comparing results I found that …
- 09:34 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Martin will be at the MDM (Modelica Design Meeting) all of next week, …
- 08:52 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) created by
- In some cases the Modelica.blocks.sources.pulse model has wrong …
- 07:35 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- I attached a test for the problem. It is got to do with final …
- 04:07 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
- Hi, Can you add a bit more info on this: What MSL are you using? What …
2012-11-29:
- 16:12 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) created by
- In the attached model the input is a const 4-vector, the index runs …
- 12:30 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- As far as I can see until now this is a bug on our part as we call …
2012-11-28:
- 13:52 Ticket #1949 (Code Generation - Support partial function evaluation) updated by
-
Status, Owner changed
Hm, these look like partially evaluated functions. I don't know if … - 13:50 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- I'll look into this as it need more investigation. Looks like maybe …
- 12:17 Ticket #1955 (Backend - Parameter values lost) updated by
- Yes, I found them already. Thank you very much! This is much better …
- 12:05 Ticket #1955 (Backend - Parameter values lost) updated by
-
Status, Owner changed
- 12:04 Ticket #1955 (Backend - Parameter values lost) updated by
- I can confirm that all parameters and variables are in the .mat file …
- 11:58 Ticket #1955 (Backend - Parameter values lost) updated by
- A colleague made a reader for mat files when OpenModelica switched to …
- 11:46 Ticket #1955 (Backend - Parameter values lost) updated by
- Ouch, it seems we don't write the parameters to the .csv or .plt …
- 11:23 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- If you call with +d=execstat you can see that it does not crash during …
- 11:18 Ticket #1955 (Backend - Parameter values lost) updated by
- I understand that the xml file is not actually a result file, but the …
- 11:13 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Hi, Ok. It seems the SCode->SCode translation does something wrong in …
- 11:10 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) updated by
- I think so. I mean we should test only complete models and maybe some …
- 11:05 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) updated by
- Shall I then remove this test from the test suite?
- 11:03 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- OK, I now looked a bit more into it. The results are fundamentally …
- 10:54 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) updated by
- Hi, I don't think that non-complete models are of interest. For …
- 10:47 Ticket #1958 (Frontend - Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components.AxisTy ...) created by
- Hi, in OpenModelica the model …
- 10:32 Ticket #1955 (Backend - Parameter values lost) updated by
- To read the values after the simulation you don't use the XML file. …
- 10:29 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Because there are only 3 Variables could you please try to remove one …
- 10:17 Ticket #1955 (Backend - Parameter values lost) updated by
- Inside.A1 in init.xml: […]
- 10:08 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- This is expected. The code is legal but written in such a way that a …
- 09:47 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) created by
- When running the MSL 3.2.1 testsuite the omc crashes at …
- 09:42 Ticket #1955 (Backend - Parameter values lost) updated by
- I guess this comes from alias removal. What is the XML info on Inside.A1?
- 09:34 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) created by
- I am testing the new instantiation with MSL 3.2.1 and noted a strange …
- 07:49 Ticket #1955 (Backend - Parameter values lost) created by
- There is a problem with the following model and …
2012-11-27:
- 14:42 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Hack for the models in BackendDAECreate.lowerVarkind […]
- 14:41 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Modelica.Magnetic.FluxTubes.Examples.SaturatedInductor …
- 12:55 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Modelica.Fluid.Examples.InverseParameterization.mos …
- 12:12 Ticket #1924 (Backend - IndexReduction.differentiateEqns failed) updated by
- Modelica.Fluid.Examples.PumpingSystem - StateSelect.prefer …
2012-11-26:
- 13:09 Ticket #1950 (Frontend - symmetric: failed to elaborate expression) closed by
- fixed: Fixed in r14075. Flattening testcase added, ExpressionSimplify handles …
- 12:56 Ticket #1950 (Frontend - symmetric: failed to elaborate expression) updated by
-
Status changed
- 09:56 Ticket #1940 (Backend - Multibody USR and SSR joints have wrong simulation values) reopened by
- I have tested FourbarVariants.JointUSR once more and it seems to be …
- 09:40 Ticket #1929 (Backend - Multibody USR and SSR joints have wrong initialization values) updated by
- Replying to lochel: > OpenModelica: …
- 08:28 Ticket #1930 (Frontend - Wrong symbolic simplification) updated by
-
Component changed
The error is caused by Expression Simplification because this reports … - 05:18 Ticket #1954 (Frontend - Vectorization of inStream and actualStream does not work) closed by
- fixed: Fixed in revision r14068.
- 05:00 Ticket #1954 (Frontend - Vectorization of inStream and actualStream does not work) updated by
-
Status changed
- 05:00 Ticket #1954 (Frontend - Vectorization of inStream and actualStream does not work) created by
- This does not work properly in: […] I have a fix for it but I need …
2012-11-25:
- 20:32 Ticket #1953 (Frontend - Function calls returning tuples are not handled in binary/unary expressions) closed by
- fixed: Fixed in revision r14067.
- 19:54 Ticket #1953 (Frontend - Function calls returning tuples are not handled in binary/unary expressions) updated by
-
Description changed
- 19:53 Ticket #1953 (Frontend - Function calls returning tuples are not handled in binary/unary expressions) updated by
-
Status changed
- 19:53 Ticket #1953 (Frontend - Function calls returning tuples are not handled in binary/unary expressions) created by
- This kind of things do not work: […]
- 16:46 Ticket #1952 (Frontend - SCodeDependency removes necessary classes in some cases) closed by
- fixed: Fixed in revision r14063.
- 15:44 Ticket #1952 (Frontend - SCodeDependency removes necessary classes in some cases) updated by
- It might be that SCodeDependency.analyseClassExtends does not do its …
- 15:16 Ticket #1952 (Frontend - SCodeDependency removes necessary classes in some cases) updated by
- I think that redeclare [restriction] extends BaseClass should never be …
- 15:14 Ticket #1952 (Frontend - SCodeDependency removes necessary classes in some cases) created by
- Run this: […] Have a look at file BranchingDynamicPipes.mo. It …
- 03:36 Ticket #1761 (OMEdit - Error messages in OMEdit should link to the relevant line) updated by
-
Cc changed
- 03:36 Ticket #1859 (OMEdit - OMEdit becomes very slow when long lines are used) updated by
-
Cc changed
- 03:36 Ticket #1760 (OMEdit - Line number don't match error messages in OMEdit) updated by
-
Cc changed
- 02:17 Ticket #1951 (Frontend - Array reduction with function returning a tuple does not work) closed by
- fixed: Fixed in r14060.
- 02:11 Ticket #1951 (Frontend - Array reduction with function returning a tuple does not work) created by
- For example: […]
2012-11-24:
- 20:06 Ticket #1950 (Frontend - symmetric: failed to elaborate expression) created by
- It seems that the Modelica builtin function 'symmetric' is missing. …
- 16:00 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) closed by
- fixed: Fixed in r14047.
2012-11-23:
- 15:00 Ticket #1949 (Code Generation - Support partial function evaluation) created by
- The model Modelica.Math.Nonlinear.Examples.quadratureLobatto3 of the …
- 12:29 WikiStart edited by
- (diff)
- 12:24 WikiStart edited by
- (diff)
- 10:46 Ticket #1948 (Backend - MultiBody model goes infinite in the back-end) closed by
- fixed: - report an error message since r14028
Note:
See TracTimeline
for information about the timeline view.
