Timeline
2014-02-05:
- 23:54 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > Ok. Seems we handle this badly in …
- 23:45 Ticket #2569 (Code Generation - Problem with code generation - external functions with records) updated by
-
Status, Owner changed
I have now understood the root cause of the problem, and I've been … - 23:09 Ticket #2569 (Code Generation - Problem with code generation - external functions with records) created by
- Please try to compile the TestStatesSat model below […] using …
- 22:54 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
- I have found a very simple workaround: I just redeclare all those …
- 17:51 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) updated by
- Forget it, it works fine now. I used another older omc. It works as …
- 17:21 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) updated by
- I got an: […] but I might need to run make clean :)
- 17:13 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) closed by
- fixed: Replying to adrpo: > I'll assign this to Per as he changed …
- 17:06 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) updated by
-
Status, Owner changed
I'll assign this to Per as he changed cardinality today and he can … - 16:25 Ticket #2062 (Frontend - Cardinality reports one but should report two) updated by
- Fixed in r18987.
- 15:27 Ticket #1048 (Run-time - delay gives wrong result for discrete signals (from MathCore)) updated by
-
Owner changed
I get the following message: […] There is something wrong with the … - 15:13 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Status, Owner changed
- 15:13 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) reopened by
- Ok. Seems we handle this badly in the front-end and we don't give the …
- 14:42 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I agree that this is bad, but I think we cannot remove it yet. The …
- 14:37 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > I think the reason for the binding is …
- 14:33 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to lochel: > The name "p" should be "spring.c". …
- 14:32 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I think the reason for the binding is that the front-end added it from …
- 14:30 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- The name "p" should be "spring.c". That was a mistake in my commit and …
- 14:20 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to lochel: > The following model Fails due to my …
- 13:55 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Also 1 AVM model fails (5 in total but 4 is just additional text changes).
- 13:52 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- The following model Fails due to my last commit: …
- 13:31 Ticket #2504 (Backend - Initialization: start value which is an unfixed parameter) reopened by
- Unfortunately, this doesn't completely fix my problem. Consider the …
- 13:26 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) closed by
- fixed: Fixed in r18982. I added the recommended warning: […] The model …
- 12:11 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- numberOfIntervals is an integer (like 500 number of intervals). …
- 10:33 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
-
Yes, you are right. Version 3.2 Revision 2 does have
Interval… - 06:18 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- You are looking at an old specification, Adeel. The new ones have the …
2014-02-04:
- 22:25 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- Because NumberOfIntervals is not part of Modelica experiment …
- 20:51 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) created by
- If in OMEdit|Simulation Setup you check the "Save simulation settings …
- 19:50 Ticket #2567 (Backend - new rewrites don't seem to be working) updated by
- My mistake. Bad syntax in the rewrite rule.
- 19:50 Ticket #2567 (Backend - new rewrites don't seem to be working) closed by
- invalid
- 19:45 Ticket #2567 (Backend - new rewrites don't seem to be working) created by
- I imagine I'm doing something wrong, but I can't seem to get the …
- 19:16 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Status changed
- 18:21 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Status, Description changed
- 18:12 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) created by
- From the Modelica spec. 3.2 rev2, sect 8.6 In the case a parameter …
- 15:32 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
-
Status, Owner, Component changed
This is front-end and not back-end. That constant should be replaced … - 15:30 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) created by
- I am trying to make the ExternalMedia library to run in OMC. The …
- 15:11 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
-
Status changed
- 15:11 Ticket #2564 (Code Generation - Problem with code generation - RealInput) updated by
-
Status changed
- 15:10 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
-
Status changed
Changing the matching algorithm does not affect the opt-module at all. … - 14:48 Ticket #2564 (Code Generation - Problem with code generation - RealInput) created by
- The model …
- 14:45 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
-
Status, Owner changed
Replying to adrpo: > Running omc without parameters or … - 14:41 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
- Running omc without parameters or with +help gives you: […]
- 14:29 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) created by
- The model ThermoPower.Examples.HRB.Simulators.OpenLoopSimulator in the …
- 14:17 Ticket #2562 (Code Generation - Problem with code generation - array in record) created by
- The compilation of model …
- 13:53 Ticket #2413 (Code Generation - Any way to put initialAnalyticJacobian information in an XML or other file?) updated by
-
Cc, Status, Owner changed
- 13:52 Ticket #2334 (Run-time - terminal + assert causes segfault) closed by
- fixed: Seems to be fixed a while back.
- 13:50 Ticket #2417 (Code Generation - Support arrayLayout) updated by
-
Status, Owner changed
- 11:27 Ticket #2561 (Backend - Misleading Errormessage for singular inital system) closed by
- fixed: Fixed in r18973. The new error message is: […]
- 09:26 Ticket #2561 (Backend - Misleading Errormessage for singular inital system) created by
- If a Modell has a singular initial system (because of the model or a …
- 09:09 Ticket #2560 (OMEdit - A suggestion for three small connecting lines improvements) updated by
- Hi, I wanted to implement the snap to grid function also for …
- 06:08 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") closed by
- fixed: make install is tested by the OSX and Linux nightly builds, including …
2014-02-03:
- 23:34 Ticket #2504 (Backend - Initialization: start value which is an unfixed parameter) closed by
- fixed: Again, this is a very good ticket. Thanks for contributing it. I …
- 23:28 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- Actually, it doesn't help. But that's because "make distclean" at the …
- 22:04 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- Yes, I'd think it could possibly help :-). I'll try it and get back …
- 19:01 Ticket #2560 (OMEdit - A suggestion for three small connecting lines improvements) created by
- I suggest the following two improvements in how connecting lines are …
2014-02-02:
- 02:15 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) closed by
- fixed: Fixed in r18932. Included the line number info too.
2014-02-01:
- 19:47 Ticket #2559 (Code Generation - Info XML does not set info tag) closed by
- invalid
- 19:46 Ticket #2559 (Code Generation - Info XML does not set info tag) updated by
- You forgot one step in your script... […] You need to load the …
- 19:40 Ticket #2559 (Code Generation - Info XML does not set info tag) created by
- The info tag is invalid for newly added variables. Run the attached …
- 17:56 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) reopened by
- I would encourage Lennart to improve the warning as he planned
- 09:57 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
- I started a new Windows nightly so Francesco can play with it. I …
- 09:12 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
- Well, I should improve the warning a bit: {{{ Warning: Parameter …
- 09:09 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) closed by
- fixed: I added the test from above here: …
- 08:32 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
-
The function
BackendVariable.varFixed(var)returned only true … - 08:07 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- If you check the version of OSX we use and test against: …
- 07:43 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
-
Status changed
I prepared a small model that covert hat issue: […] - 01:29 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- The attached is the part of the log file where libipopt.la is created. …
2014-01-31:
- 21:46 Ticket #2558 (Backend - $PRE variables in info XML are marked discrete) updated by
-
Summary changed
- 21:44 Ticket #2558 (Backend - $PRE variables in info XML are marked discrete) created by
- All $PRE variables in the model_info.xml file are marked discrete. […]
- 21:08 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) created by
- From Modelica 3.3 specification, Section 8.6: If a parameter has a …
- 07:50 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- clang and gcc won't matter. It is libtool that creates .la-files. And …
2014-01-30:
- 22:14 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- You're using CLANG, I'm using gcc (OS X 10.6). In my build/lib/omc/, …
- 14:52 Ticket #2556 (Frontend - Support qualified component references in external function definitions) updated by
-
Cc changed
- 14:44 Ticket #2556 (Frontend - Support qualified component references in external function definitions) updated by
- The easiest way would be to just add dummy protected temp variables …
- 14:23 Ticket #2556 (Frontend - Support qualified component references in external function definitions) updated by
-
Status, Owner changed
- 14:23 Ticket #2556 (Frontend - Support qualified component references in external function definitions) created by
- Currently the specification says that: Spec 12.9: "The only …
- 14:15 Ticket #2368 (Code Generation - Record with 0-length array) updated by
- I'm talking about the "Real …
- 14:09 Ticket #2368 (Code Generation - Record with 0-length array) updated by
- What do you mean you cannot access variables properly? OpenModelica …
- 13:46 Ticket #2368 (Code Generation - Record with 0-length array) updated by
- new seems to work, but i cannot access the variables properly […]
- 12:44 Ticket #2555 (Frontend - Missing cast for integer array) updated by
-
Status, Owner changed
Current OpenModelica trunk/ actually crashes on this because we try to … - 12:05 Ticket #2555 (Frontend - Missing cast for integer array) created by
- I have the following model that is producing an integer array that is …
- 10:51 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- I just get this, no symlinks for the .la-file: […]
- 10:35 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
-
Status, Owner changed
2014-01-29:
- 23:59 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
- The issue is that, the first run of causalization the index reduction …
- 22:32 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
- Okay, I will investigate this issue a bit more and reverted r18840 for now.
- 22:30 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
- Thank you Adrian for keeping an eye on it. @Lennart, I can have a look …
- 22:23 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
- The fix in r18840 breaks 5 AVM models.
- 22:21 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
-
Cc changed
- 22:09 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
-
Status, Owner changed
- 21:41 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") created by
- on OS X, when I do a clean build of OpenModelica (latest sources) …
- 18:51 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) created by
- The post-optimize module encapsulateWhenConditions creates independent …
- 16:22 Ticket #2552 (OMEdit - Implement total model dumping in OMEdit) updated by
- I would also add a check-box to show annotations or not …
- 16:20 Ticket #2552 (OMEdit - Implement total model dumping in OMEdit) created by
- It would be nice to make it possible to do a total model dump from …
- 15:21 Ticket #2551 (MetaModelica - Bootstrapped compiler fails to display error about duplicate ...) updated by
-
Summary changed
- 15:21 Ticket #2551 (MetaModelica - Bootstrapped compiler fails to display error about duplicate ...) created by
- See r18836: […] This fails with an error message that variable …
Note:
See TracTimeline
for information about the timeline view.
