Timeline
2019-09-13:
- 18:59 Ticket #5635 (OMEdit - Multi(---) connection issue) updated by
- Replying to casella: > Determining the connector size in …
- 14:06 Ticket #5614 (FMI - error in FMU instantiate in case of large models) updated by
- Hi #lochel, some news about this issue. Our SW development team has …
- 11:42 Ticket #5607 (Installation program - Mac installation issue) updated by
- If I lauch OMShell I get (after a few seconds) the following: […]
- 11:16 Ticket #5624 (Backend - if else ODE and Algebraic Equation) updated by
- I actually figured out a way to solve the problem by using a …
- 10:30 Ticket #5624 (Backend - if else ODE and Algebraic Equation) updated by
- I opened a discussion on the Modelica Specification issue tracker, see …
- 10:02 Ticket #5333 (OMEdit - Autocompletion of annotations) closed by
- fixed: Works like a charm. Thanks @atrosinenko and @adeas31 for implementing …
- 07:45 Ticket #5607 (Installation program - Mac installation issue) updated by
-
The important part in the log is,
[…]
Can you run
omc? - 07:06 Ticket #5607 (Installation program - Mac installation issue) updated by
- Tried today. Installed today's night build binary. Got got the …
2019-09-12:
- 22:33 Ticket #5607 (Installation program - Mac installation issue) updated by
- @ceraolo, do you still have this problem?
- 22:29 Ticket #5633 (OMEdit - Default name for the first instance of a class) updated by
- Great, thanks!
- 22:28 Ticket #5635 (OMEdit - Multi(---) connection issue) updated by
- Determining the connector size in general could be difficult, or …
- 21:42 Ticket #5635 (OMEdit - Multi(---) connection issue) created by
- In OpenModelica, 1. it allows to make the connection between two …
- 15:08 Ticket #5614 (FMI - error in FMU instantiate in case of large models) updated by
- Hi @lochel, today I have compiled the attached source code (fmuSimple) …
- 08:41 Ticket #5634 (*unknown* - Compilation on macOS fails) created by
-
I get the followng error when building from a fresh
git clone: […] - 08:33 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- @adrpo is apparently trying to get the Windows nightly back again. The …
- 06:45 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- I could not check the latest improvements since there is not today's …
2019-09-11:
- 14:41 Ticket #5633 (OMEdit - Default name for the first instance of a class) closed by
- fixed: Done in 2056452/OpenModelica.
- 14:41 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- Done in 540136b/OpenModelica.
- 14:40 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- Merged in af0b7bf/OpenModelica.
- 10:04 Ticket #5632 (FMI - Error creating an fmu with 'Modelica_DeviceDrivers' (1.7.1) block ...) updated by
- seems like changing Platform (Tools/Options/FMI) from "Static" to …
- 09:42 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- Replying to adeas31: > Yes we can add them to the …
- 09:41 Ticket #5633 (OMEdit - Default name for the first instance of a class) created by
- The convention for the MSL has been to use names starting with capital …
- 07:27 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- > > Anyways one idea to solve this problem is to drop such …
- 05:22 Ticket #5632 (FMI - Error creating an fmu with 'Modelica_DeviceDrivers' (1.7.1) block ...) created by
- Hi all, I'm running into some issues compiling an fmu containing the …
2019-09-10:
- 19:10 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- > if the user selects two components and the connecting line …
- 19:05 Ticket #5618 (OMEdit - Erroneous unit of sine phase angle) updated by
- I tried to fix it 7bcccd3/OpenModelica. Can you try the …
- 17:58 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- Replying to adeas31: > I have now fixed the focus issue …
- 11:48 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- Yes we can add them to the ModelicaBuiltin.mo, […] The list of …
- 11:25 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- I have now fixed the focus issue and the text copying issue. See …
- 06:39 Ticket #5628 (OMEdit - OMEdit doesn't allow to choose the array element when a connection is ...) updated by
- See suggestion in ticket:5629#comment:2 for a temporary fix.
- 06:37 Ticket #5629 (OMEdit - OMEdit does allow to set connectorSizing parameters in some cases) reopened by
- See #5628, if we bar the user from setting the parameter, then OMEdit …
- 06:30 Ticket #3675 (OMEdit - Add interactive simulation support (e.g., DynamicSelect display)) updated by
-
Milestone changed
We can tentatively set the milestone to 2.0.0 - 06:28 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
-
Cc changed
Andrea, can you please provide the same example using Python syntax?
2019-09-09:
- 17:50 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- Thanks. I also discovered it yesterday and already have a fix for it …
- 16:55 Ticket #5628 (OMEdit - OMEdit doesn't allow to choose the array element when a connection is ...) updated by
-
Priority changed
TheconnectorSizingannotation (see Section 18.7 of the … - 16:33 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- > > You have a test case for it? A simple procedure to reproduce the …
- 16:05 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- Maybe only Thomas Beutlich can do that
- 12:27 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- Replying to ceraolo: > Another issue is that copying text …
- 11:54 Ticket #5628 (OMEdit - OMEdit doesn't allow to choose the array element when a connection is ...) updated by
-
Priority changed
This is because of theconnectorSizingannotation set onnu. I … - 11:30 Ticket #5631 (Interactive Environment - Fix DynamicSelect for new API) updated by
-
Status, Owner changed
- 11:30 Ticket #5631 (Interactive Environment - Fix DynamicSelect for new API) created by
-
The
-nfAPIflag simply ignores the DynamicSelect annotation. To get … - 09:58 Ticket #5622 (OMEdit - Editor issue on not keeping changes) closed by
- fixed: Fixed in db329f7/OpenModelica.
- 09:57 Ticket #5629 (OMEdit - OMEdit does allow to set connectorSizing parameters in some cases) closed by
-
invalid: Because it has the
connectorSizingannotation and according to the … - 09:37 Ticket #3675 (OMEdit - Add interactive simulation support (e.g., DynamicSelect display)) updated by
- This is still WIP. However, you should read the documentation …
- 08:52 Ticket #5630 (OMEdit - Double-click in Libraries tree expand/collapse button opens selected node) closed by
- invalid: This is already fixed. See #5443. Please try the latest nightly build.
2019-09-08:
- 10:59 Ticket #5630 (OMEdit - Double-click in Libraries tree expand/collapse button opens selected node) created by
- Double-click on expand/collapse button in libraries tree view is the …
- 10:24 Ticket #3675 (OMEdit - Add interactive simulation support (e.g., DynamicSelect display)) updated by
- Can someone clarify what is the current status of Diagram Animation …
2019-09-07:
- 15:26 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Hi, I would only suggest you to add info to the variable when it is …
- 15:15 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Replying to adrpo: > For Julia, something like this (I …
- 14:32 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
-
Cc changed
For Julia, something like this (I also added John and Arun in the cc, … - 14:16 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- It's merged
- 13:07 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Right now it prints output like the following: […] Where …
- 09:33 Ticket #5629 (OMEdit - OMEdit does allow to set connectorSizing parameters in some cases) created by
- If you instantiate the following block in a model: […] its …
- 09:28 Ticket #5628 (OMEdit - OMEdit doesn't allow to choose the array element when a connection is ...) created by
- in the current nightly OMEdit doesn't allow to choose the array …
- 08:32 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- Another issue is that copying text from a tab and pasting into another …
- 08:22 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- Replying to casella: > Strange that I didn't manage to …
- 08:17 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- Strange that I didn't manage to assign you to the issue. Can you …
- 08:15 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- Replying to casella: > I would suggest @perost and @adrpo …
- 08:15 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
-
Type, Milestone changed
See [https://github.com/modelica/ModelicaSpecification/issues/2410 … - 07:42 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Good! Once this is ready, I'll hand it over to Adeel for the GUI access.
- 07:41 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- Looks quite good. As far as I understand, there are still three things …
2019-09-06:
- 18:34 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- I opened a [https://github.com/OpenModelica/OpenModelica/pull/422 …
- 16:33 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- Replying to casella: > I agree that the specification …
- 16:26 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
-
Replying to perost:
>
body[i].framewould in fact have … - 16:02 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- Replying to casella: > My interpretation of the …
- 15:57 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- Replying to Andrea.Bartolini: > I confirm the behavior in …
- 15:55 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
-
My interpretation of the specification is that
c1,c2, ... … - 15:43 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- @bernt, is this what you'd like to have? I usually edit the Modelica …
- 15:43 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Replying to Karim.Abdelhak: > Replying to [comment:1 …
- 15:38 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
- The error is correct as far as I can see, the connector reference does …
- 15:26 Ticket #5627 (New Instantiation - Invalid "form for a connector" error in new frontend) updated by
-
Owner, Component changed
@perost, if this is a quick fix it would be nice to have in 1.14.0, … - 13:17 Ticket #3776 (OMEdit - Copy & paste in OMEdit) updated by
- I confirm the behavior in the last comment of Ceraolo. I think that …
- 10:32 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Python: Not in the standard library, but for Matlab files <=v7.2, …
- 08:48 Ticket #5626 (OMEdit - Linearize should be available from the OMEdit GUI) updated by
- Replying to casella: > It would also be nice to get the …
Note:
See TracTimeline
for information about the timeline view.
