Timeline
2015-12-16:
- 12:40 Ticket #2647 (Backend - Expression.simplify is way too slow) updated by
- Willi, has done some anaylses for changes in …
- 12:23 Ticket #3601 (OMEdit - Syntax check does not show error details in browser; the error wrongly ...) created by
- I had the following behaviour with OM 1.9.4-dev-667 (as reported by …
- 12:04 Ticket #3597 (Backend - clockPartitioning fail for new MSL models) updated by
-
Status changed
I have fixed the second issue with … - 10:24 Ticket #3600 (Frontend - Hierarchical stream connectors are not handled correctly) updated by
-
Description changed
- 10:23 Ticket #3600 (Frontend - Hierarchical stream connectors are not handled correctly) created by
- If a hierarchical connector contains N > 1 stream connectors, the …
2015-12-15:
- 17:15 Ticket #3599 (FMI - fmiInitialize crash - stack alignment assumption incorrect) updated by
-
Owner, Component changed
- 15:57 Ticket #3599 (FMI - fmiInitialize crash - stack alignment assumption incorrect) created by
- The version of MinGW shipped with OpenModelica 1.9.3 contains gcc …
- 14:06 Ticket #3598 (Cpp Run-time - C++ keywords as a Modelica variable inside of a function) updated by
- No problem. It's just that you were the default owner for tickets that …
- 12:42 Ticket #3598 (Cpp Run-time - C++ keywords as a Modelica variable inside of a function) updated by
-
Status, Owner changed
Hi Lennart, because I have only 3 days remaining at the university, I … - 12:28 Ticket #3469 (New Instantiation - Conditional declarations doesn't work with inner/outer components) updated by
- And trying to use the record workaround results in yet another odd …
- 11:47 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) updated by
-
Milestone changed
- 09:31 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) closed by
- fixed: Fixed in …
- 09:21 Ticket #3469 (New Instantiation - Conditional declarations doesn't work with inner/outer components) updated by
- This model is similar but gives a slightly nastier looking error …
- 09:11 Ticket #3598 (Cpp Run-time - C++ keywords as a Modelica variable inside of a function) created by
- It seems that there are some issues similar to #3596 in the Cpp …
- 08:49 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) updated by
-
Status changed
I see! Thanks for reporting this issue. - 08:43 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) updated by
- Ah, sorry, there appears to be more to it than that. You need to …
- 07:45 Ticket #3597 (Backend - clockPartitioning fail for new MSL models) updated by
-
Status, Owner changed
I can have a look. - 00:00 Ticket #3597 (Backend - clockPartitioning fail for new MSL models) created by
- The clockPartitioning module fails for the following models from trunk …
2015-12-14:
- 22:12 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) updated by
- Can you tell us also what OpenModelica version are you using?
- 22:11 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) updated by
- I cannot reproduce this for the c runtime, but the code for the Cpp …
- 18:02 Ticket #3596 (Code Generation - Using a c keyword as a Modelica variable name doesn't work) created by
- I created a model with a parameter called "switch" in it. The …
- 15:56 Ticket #3595 (FMI - Dereference of uninitialized value in fmiInstantiateModel) created by
- […]
- 12:55 Ticket #2304 (OMNotebook - OMNotebook: displaying equations) updated by
- Perfect, Thanks for the fix, I am working on windows operating system …
- 12:50 Ticket #3361 (Build Environment - Build on OS X fails) closed by
- fixed
- 12:44 Ticket #3361 (Build Environment - Build on OS X fails) updated by
- OM seems to compile fine on OS X again. Time to close this issue?
- 11:59 Ticket #2304 (OMNotebook - OMNotebook: displaying equations) updated by
- I just committed code to fix the two problems I stated before: …
- 11:55 Ticket #3594 (MetaModelica - Bitwise operators in MetaModelica are broken) closed by
- fixed: Fixed in 881d9f6. It was just a typo in …
2015-12-13:
- 10:40 Ticket #2304 (OMNotebook - OMNotebook: displaying equations) updated by
- Latex Cells are great. I have just two problems with it: 1. (Here, …
2015-12-11:
- 16:51 Ticket #3594 (MetaModelica - Bitwise operators in MetaModelica are broken) created by
- The bitwise operators in MetaModelica seem to be completely broken, …
- 11:56 Ticket #3593 (MetaModelica - Segfault when combining generic types, arrays and scripts) created by
- The attached script segfaults. The issue seems to be using a uniontype …
- 01:01 Ticket #3592 (Code Generation - Eigen values fails with error) created by
-
Using
Matrices.eigenValuesresults in following error, […] Use … - 00:48 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- Replying to adeas31: > That is exactly how i want it to be …
- 00:46 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- That is exactly how i want it to be interpreted. I don't care if the …
- 00:38 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- Opened #m:1854 about this. Note that what you quoted from the spec: …
- 00:23 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- The grammar says: […] So saving any number of top level classes in …
- 00:10 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- Replying to adrpo: > Because when you generate code from a …
2015-12-10:
- 23:45 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- Because when you generate code from a total model you in general have …
- 23:41 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- Replying to adrpo: > I think this is a new restriction on …
- 23:40 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- This is not new. It was in OMEdit from a long time and it is because …
- 23:06 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Thanks for pointing this out :)
- 23:03 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- Replying to ceraolo: > > > > > > > Q2: What is the …
- 22:59 Ticket #3583 (Backend - Support for disabling Jacobians) closed by
- invalid
- 22:59 Ticket #3583 (Backend - Support for disabling Jacobians) reopened by
- I'm going to set resolution to invalid, since there was nothing to fix.
- 22:40 Ticket #3590 (Run-time - LOG_NLS_V fails due to memory overrun) updated by
- As a general rule, we should not have code in OMC which crashes or is …
- 22:18 Ticket #3583 (Backend - Support for disabling Jacobians) closed by
- fixed: OK. Given the information stated so far, I can close the ticket
- 18:45 Ticket #3590 (Run-time - LOG_NLS_V fails due to memory overrun) updated by
-
Status, Owner changed
- 18:32 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- > > > > Q2: What is the rationale of also allowing to fix the value of …
- 18:25 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) updated by
- I think this is a new restriction on OMEdit so that is easier to …
- 17:26 Ticket #3591 (OMEdit - OMEdit fails when opening "total save" model) created by
-
The attached model is created by using
File->Save Totalon the model … - 15:39 Ticket #3590 (Run-time - LOG_NLS_V fails due to memory overrun) updated by
- +1 I've been intending to report this for a while, but haven't had a …
- 15:31 Ticket #1840 (OMEdit - OMEdit: enable copy/paste) closed by
- fixed
- 15:30 Ticket #1840 (OMEdit - OMEdit: enable copy/paste) updated by
- I checked 1.9.3 release... The trunk version is now fixed and …
- 14:06 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Replying to casella: > Sorry, let me focus back on the …
- 13:31 Ticket #1840 (OMEdit - OMEdit: enable copy/paste) updated by
- Replying to hkiel: > This ticket is not invalid. > > Menu …
- 13:26 Ticket #1840 (OMEdit - OMEdit: enable copy/paste) updated by
- This ticket is not invalid. Menu items Cut, Copy and Paste (in menu …
- 12:35 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- Replying to casella: > This is Martin Otter's reply to my …
- 12:30 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Please note that in this case we know a priori that the system is …
- 12:25 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Sorry, let me focus back on the core issue: we have a test case in …
- 12:14 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- This is Martin Otter's reply to my enquiry: > Q1: How are these …
- 09:53 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Replying to sjoelund.se: > Using …
- 09:02 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Replying to wbraun: > No, the Jacobian df/dx is computed …
- 08:41 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Replying to sjoelund.se: > Well, those 3 are fast. What …
- 08:37 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Well, those 3 are fast. What does "SimCode generated analytical …
- 08:35 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Replying to sjoelund.se: > {{{ > Notification: Performance …
- 07:47 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Using --postOptModules-=detectJacobianSparsePattern, there still seems …
- 03:19 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- I see. For instance in the inertia there is the row in MSL code: …
2015-12-09:
- 23:45 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- No, the Jacobian df/dx is computed analytically f(x,t) w.r.t. x only …
- 22:12 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Just to make sure I get it correctly: - the original system (after …
- 20:33 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- By default we generate _only_ for linear systems symbolic jacobians, …
- 20:32 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- Well, I have similar understanding as of Francesco. According to my …
- 19:30 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- My reasoning was simple: 1) at least as a first step, we want to have …
- 18:49 Ticket #3590 (Run-time - LOG_NLS_V fails due to memory overrun) created by
- Please consider the attached test case. The log output comes to this …
- 18:17 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- With respect to mechanical models, I'm checking this out with Martin …
- 17:39 Ticket #3588 (Interactive Environment - diffModelicaFileListings consumes huge time and memory) updated by
- This is new functionality
- 17:37 Ticket #3588 (Interactive Environment - diffModelicaFileListings consumes huge time and memory) updated by
- Sorry for the naive question, is this related to the new commits by …
- 15:29 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Where get those Jacobians calculated? Inside the SimCode phase?
- 14:55 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
-
Status, Owner changed
- 14:54 Ticket #3583 (Backend - Support for disabling Jacobians) updated by
- Not only that. All the generation of code to compute the Jacobian …
- 14:22 Ticket #3588 (Interactive Environment - diffModelicaFileListings consumes huge time and memory) updated by
- We try to do this, but I guess in this case the unparsing does not …
- 14:02 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- I think inititalisation boxes must be present for variables that are …
- 14:01 Ticket #3588 (Interactive Environment - diffModelicaFileListings consumes huge time and memory) updated by
- As I understand it, the changes are rather localized to a class so we …
- 13:51 Ticket #3588 (Interactive Environment - diffModelicaFileListings consumes huge time and memory) updated by
- The thing that consumes the memory is the myer's paths. So we need to …
- 13:40 Ticket #3588 (Interactive Environment - diffModelicaFileListings consumes huge time and memory) updated by
- Well, diff algorithms scale O(ND). There is a huge number of diffs in …
- 13:21 Ticket #3587 (OMEdit - OMEdit build on MacOS is broken) closed by
- fixed
- 13:20 Ticket #3447 (OMEdit - Use of msvc flag in OMEdit) updated by
- Corrected in 04984ba/OMEdit
- 09:46 Ticket #3447 (OMEdit - Use of msvc flag in OMEdit) updated by
- See my comment on …
- 08:58 Ticket #3447 (OMEdit - Use of msvc flag in OMEdit) updated by
- the nightly build v1.9.4-dev-667-g37ad4ee still crashes with the same error
- 06:17 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- Is it possible to just overwrite omedit.exe? Just in case, where can I …
- 01:17 Ticket #2391 (OMEdit - Improve handling of modifiers in OMEdit) updated by
- Replying to ceraolo: > This issue has been solved for …
Note:
See TracTimeline
for information about the timeline view.
