Timeline
2012-12-06:
- 17:27 Ticket #1973 (Backend - Problem with initial equations affecting valve models in Modelica.Fluid) updated by
-
Cc changed
- 17:24 Ticket #1973 (Backend - Problem with initial equations affecting valve models in Modelica.Fluid) created by
- The PartialValve model in Modelica.Fluid had a wrong, redundant …
- 10:05 Ticket #1971 (Backend - Errors in return values in functions with two outputs) closed by
- fixed: fixed in r14257
- 09:57 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- Here goes something wrong. It is not possible to replace or even …
- 07:57 Ticket #1405 (Frontend - Wrong dimensions for arrays of array aliases) updated by
- Hopefully fixed in r14255.
- 07:57 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Hopefully fixed in r14255.
- 03:41 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- Incredible how many occurrences of this when initial() then reinit we …
- 00:32 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) closed by
- fixed: Fixed in r14246 and r14247 and r14250 ... Lots or revisions to get it …
2012-12-05:
- 18:29 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- Ok. I'll already started to add the check. I'll continue.
- 18:27 Ticket #1688 (Backend - Reinit of non-state variables) updated by
- I opened a new bug about the reinit in when with condition initial: …
- 18:26 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- in such y case you can with: […] The problem is that initial() does …
- 18:12 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- The question is if this really makes no sense. Say you load "u" from …
- 18:10 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) created by
- From Lennart (lochel) comment on bug #1688: reinit used in a when …
- 15:03 Ticket #1688 (Backend - Reinit of non-state variables) updated by
- Nice. You can recover the test case from #51. I have already removed …
- 14:58 Ticket #1688 (Backend - Reinit of non-state variables) updated by
-
Cc changed
We might catch the reinint in when initial in the front-end. I'll … - 14:54 Ticket #1688 (Backend - Reinit of non-state variables) updated by
-
Cc changed
- 14:46 Ticket #1971 (Backend - Errors in return values in functions with two outputs) created by
- Functions with two outputs, where the first output is a scalar and the …
- 14:21 Ticket #1688 (Backend - Reinit of non-state variables) updated by
- look also for #51. There is reinit used in a when initial() clause: …
- 14:16 Ticket #1688 (Backend - Reinit of non-state variables) updated by
-
Cc, Component, Description changed
- 14:15 Ticket #51 (Backend - reinit() is not accepted) updated by
-
Component changed
I guess, that is no valid Modelica code. - 12:32 Ticket #1965 (Backend - TriggeredSampler model doesn't switch properly) closed by
- fixed: fixed in r14235.
- 04:36 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) closed by
- fixed: fixed in r14235.
2012-12-04:
- 15:13 Ticket #1811 (Frontend - Wrong equation count in Fluid source model with zero ports) closed by
- fixed: Works with OMC r14198
- 11:28 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Yes, the old instantiation is still used for typing when using the …
- 11:25 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- The last comment of #1405 says the issue is fixed by "+d=sCodeInst" …
- 11:11 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Duplicate of #1405.
- 10:46 Ticket #1970 (Backend - Multibody Visualizers type error) created by
- The model contained in the attached file outputs a type mismatch error …
- 09:28 Ticket #1964 (Backend - Bound Parameter Expression unfixed) closed by
- fixed: solved in r14225
- 08:50 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
- The optimization method (e.g. nelder_mead_ex) is meaningless if the …
- 08:43 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
- If I run the system with +d=solveinitialsystem, I get no error and a …
- 08:35 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
-
Cc changed
I ran the model with Visual Studio to debug the model a bit more. It …
2012-12-03:
- 18:10 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) closed by
- fixed
- 18:09 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) closed by
- fixed
- 17:13 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) updated by
- Hopefully fixed in r14209.
- 17:13 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) updated by
- Hopefully fixed in r14209.
- 16:34 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) updated by
- Same as bug #1969. The fix in r14047 is wrong. I should do TSUB …
- 16:33 Ticket #1946 (Frontend - Finding the dimension of the component with unknown dimension from the ...) reopened by
- 16:32 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) updated by
-
Status changed
This is a duplicate of #1946. It seems my fix of it was a bit wrong. … - 16:14 Ticket #1969 (Frontend - function with multiple return value used only first one does not work) created by
- According to the msl example […] the following model does not …
- 14:35 Ticket #1968 (Backend - Modelica.Media.Examples.Tests.MediaTestModels.Water.WaterIF97OnePhase_p ...) updated by
- Hi, It seems that somewhere SimCode.SES_NONLINEAR.crefs are getting a …
- 13:38 Ticket #1968 (Backend - Modelica.Media.Examples.Tests.MediaTestModels.Water.WaterIF97OnePhase_p ...) created by
- The Model …
- 13:00 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) created by
- Hi, this is one of the last models from MultiBody (not counting …
- 04:05 Ticket #1966 (Build Environment - Add all the ModelicaTest example models to the OpenModelica testsuite) created by
- Would be really good to add all the tests (not only MultiBody) from …
- 04:01 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Cc, Owner changed
- 03:59 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Status, Owner changed
2012-12-02:
- 23:32 Ticket #1955 (Backend - Parameter values lost) closed by
- fixed: I will close this bug as you found the workaround of using .mat files. …
- 18:01 Ticket #1965 (Backend - TriggeredSampler model doesn't switch properly) updated by
-
Status, Owner changed
Is raised by the same issue as #1959. - 17:57 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
-
Keywords, Status, Owner changed
The issue with sawtooth is fixed in r14197. The other problem with … - 17:51 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) closed by
- fixed: fixed in r14197.
- 16:45 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
-
Summary changed
Ok. I'll see if I can add the Evaluate=true for these. - 15:33 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- Yes in the comment of the Variable, see also …
- 15:16 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- These are not the problems we face. My fix does this, basically as …
- 15:07 Ticket #1965 (Backend - TriggeredSampler model doesn't switch properly) created by
- In the model TestTriggeredSampler1 a TriggeredSampler is triggered …
- 13:30 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- I do believe it is because (previously?) the backend would be unable …
- 13:19 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- So if the frontend evaluate a parameter it would be good to mark it as …
- 13:10 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- It is allowed to evaluate any parameter you like in a Modelica …
- 12:48 Ticket #1964 (Backend - Bound Parameter Expression unfixed) created by
- The following model is not possible to simulate with the current …
- 04:44 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- Unfortunately the fix breaks too many models and we cannot fix this …
2012-12-01:
- 20:40 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
- Hi again, It seems we do constant evaluation for all subscripts that …
- 17:14 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
- and both models stopped working with MSL3.2.1, because the models …
- 16:35 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
-
Keywords, Status changed
Yes, #1959 and #1960 belongs together. Both relies on same when … - 15:50 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
- This might also be connected with #1959 where it said that "Yesterday …
- 15:39 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) updated by
-
Status changed
Hi, I guess T.StrengthMap is a package constant. We replace package … - 13:21 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) updated by
-
Status, Owner changed
It seems to be connected to event handling. Internally the pulse … - 12:31 Ticket #1963 (New Instantiation - Frontend replaces constant array with parameter subscripts) created by
- In the model Modelica.Electrical.Digital.Examples.DFFREG the frontend …
- 10:58 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
- Sure. I'm using MSL 3.2.1, OpenModelica 1.9.0 beta 2, r14139 as of …
2012-11-30:
- 22:35 Ticket #1728 (Backend - findDiscreteEquation failed for algorithm) updated by
-
Status, Owner changed
- 22:33 Ticket #1648 (Backend - package array constants not handeld in functions) updated by
-
Status, Owner, Component, Cc changed
- 22:32 Ticket #1643 (Backend - FMU is not re-initialized after set continuous state) updated by
-
Status, Owner, Component, Cc changed
- 22:32 Ticket #1489 (Backend - if equation with initial() as condition causes rightless error) updated by
-
Status, Owner, Component, Cc changed
- 22:31 Ticket #1653 (Run-time - Simulation uses wrong results from singular liniear system for calculation.) updated by
-
Owner, Cc, Component changed
- 17:54 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) closed by
- fixed: This seems to be fixed now. Christian, can you enable the test for it …
- 16:23 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Should work in r14168 but did not run tests.
- 16:12 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Ok, this is a bit weird... I got the following array in the code using …
- 15:59 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- I've reran it again with Dymola and MSL 3.2.1 and I got the same …
- 15:45 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
- Did you use the exact same version of MSL? It might be that the trunk …
- 15:43 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
-
Keywords, Component changed
As far as I see it's not a runtime issue. Just the enumeration to … - 15:36 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- I'm already working on debugging this so hopefully I'll fix it soon.
- 15:02 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) updated by
-
Summary changed
- 14:46 Ticket #1962 (Backend - Mixed multibody/fluid model initialization error) created by
- The attached model is a mixed fluid/multibody model build with MSL …
- 14:30 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) updated by
-
Status, Owner changed
- 14:29 Ticket #1961 (Frontend - Modelica.Electrical.Digital.Sources.Table) created by
- Hi, while comparing results I found that …
- 09:34 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- Martin will be at the MDM (Modelica Design Meeting) all of next week, …
- 08:52 Ticket #1960 (Backend - Modelica.blocks.sources.pulse wrong simulation results) created by
- In some cases the Modelica.blocks.sources.pulse model has wrong …
- 07:35 Ticket #1956 (New Instantiation - Merge modifiers from the original component when redeclaring components.) updated by
- I attached a test for the problem. It is got to do with final …
- 04:07 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) updated by
- Hi, Can you add a bit more info on this: What MSL are you using? What …
2012-11-29:
- 16:12 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) created by
- In the attached model the input is a const 4-vector, the index runs …
- 12:30 Ticket #1957 (Backend - Modelica.Mechanics.MultiBody.Examples.Elementary.Surfaces) updated by
- As far as I can see until now this is a bug on our part as we call …
Note:
See TracTimeline
for information about the timeline view.
