Timeline
2012-12-11:
- 15:33 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) closed by
- invalid: Ok. rm -rf Compiler works, make clean did not. Go figure, it works in …
- 13:42 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
- I get the same output as Per for […] File m.mo […] result: […]
- 13:12 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
- Nope. Make clean still gives me the same output (which is different …
- 12:59 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
- With saveTotalSCode I get: […] I guess I will try make clean.
- 12:44 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
- saveTotalSCode on M with the latest MSL 3.2.1 and a clean trunk gives: …
- 11:52 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
- These are lots of fun: […]
2012-12-10:
- 22:24 Ticket #1976 (Backend - val return different result on windows an linux on event point) updated by
- It seems that since revision r14297 this model has the same results in …
- 17:08 Ticket #1979 (Code Generation - wrong results in integer matrix equation) closed by
- fixed: fixed in r14315
- 17:07 Ticket #1979 (Code Generation - wrong results in integer matrix equation) updated by
-
Status, Component changed
- 17:07 Ticket #1979 (Code Generation - wrong results in integer matrix equation) updated by
-
Status, Owner changed
- 16:56 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
- This model actually seems to work as intended. It only looked like it …
- 16:27 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) updated by
-
Description changed
Renamed component r to x so that the model is valid. - 16:15 Ticket #1980 (Frontend - SCodeFlatten fails to rename imports) created by
- SCodeFlatten fails to rename imports that are part of a path […]
- 15:49 Ticket #1979 (Code Generation - wrong results in integer matrix equation) updated by
-
Cc changed
- 13:18 Ticket #1979 (Code Generation - wrong results in integer matrix equation) created by
- See the attached model, OMC fails to expand the last equation, the …
- 13:03 Ticket #1975 (Backend - Error in solving nonlinear system for Mechanics.rotational clutch model) closed by
- fixed
- 12:56 Ticket #1978 (New Instantiation - Improve lookup in instances in the new lookup) created by
- The new lookup currently allows looking up anything in instances, but …
- 12:03 Ticket #1977 (New Instantiation - Better error messages for missing imports) created by
- If the new lookup fails to find an import path it will just continue. …
2012-12-09:
- 23:21 Ticket #1976 (Backend - val return different result on windows an linux on event point) updated by
- Anybody has a 32 bit Linux to test if it behaves like Windows? At …
- 22:36 Ticket #1976 (Backend - val return different result on windows an linux on event point) created by
- The model simulation_modelica_others.sample3.mos returns for the …
- 17:04 Ticket #1975 (Backend - Error in solving nonlinear system for Mechanics.rotational clutch model) updated by
- fixed in r14296.
2012-12-07:
- 19:12 Ticket #132 (New Instantiation - Functions are not inherited correctly when extending packages) updated by
- Ok, I'll look into it.
- 17:45 Ticket #128 (Backend - Default fixed=true attribute set to state variables even when not meant) closed by
- fixed: OMC 1.9.0 beta implements the correct semantics
- 16:21 Ticket #131 (Backend - Replaceable model doesn't work) closed by
- fixed
- 15:42 Ticket #132 (New Instantiation - Functions are not inherited correctly when extending packages) updated by
-
Status, Owner, Component changed
- 15:41 Ticket #132 (New Instantiation - Functions are not inherited correctly when extending packages) updated by
-
Component changed
I tried the test package with the scodeInstShortcut flag. Test_f now … - 15:10 Ticket #1975 (Backend - Error in solving nonlinear system for Mechanics.rotational clutch model) updated by
-
Status, Owner changed
- 10:05 Ticket #1975 (Backend - Error in solving nonlinear system for Mechanics.rotational clutch model) created by
- The model: Modelica.Mechanics.Rotational.Components.OneWayClutch is …
- 10:00 Ticket #1974 (Build Environment - Types in the OMC compiler) created by
- Maybe we should switch all the f2c types from int to long so they are …
- 00:23 Ticket #1970 (Backend - Multibody Visualizers type error) closed by
- fixed: Fixed in r14273.
- 00:22 Ticket #1405 (Frontend - Wrong dimensions for arrays of array aliases) closed by
- fixed: Fixed in r14273.
2012-12-06:
- 17:27 Ticket #1973 (Backend - Problem with initial equations affecting valve models in Modelica.Fluid) updated by
-
Cc changed
- 17:24 Ticket #1973 (Backend - Problem with initial equations affecting valve models in Modelica.Fluid) created by
- The PartialValve model in Modelica.Fluid had a wrong, redundant …
- 10:05 Ticket #1971 (Backend - Errors in return values in functions with two outputs) closed by
- fixed: fixed in r14257
- 09:57 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- Here goes something wrong. It is not possible to replace or even …
- 07:57 Ticket #1405 (Frontend - Wrong dimensions for arrays of array aliases) updated by
- Hopefully fixed in r14255.
- 07:57 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Hopefully fixed in r14255.
- 03:41 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- Incredible how many occurrences of this when initial() then reinit we …
- 00:32 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) closed by
- fixed: Fixed in r14246 and r14247 and r14250 ... Lots or revisions to get it …
2012-12-05:
- 18:29 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- Ok. I'll already started to add the check. I'll continue.
- 18:27 Ticket #1688 (Backend - Reinit of non-state variables) updated by
- I opened a new bug about the reinit in when with condition initial: …
- 18:26 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- in such y case you can with: […] The problem is that initial() does …
- 18:12 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) updated by
- The question is if this really makes no sense. Say you load "u" from …
- 18:10 Ticket #1972 (Frontend - Reinit in when equations with condition initial() should report an error) created by
- From Lennart (lochel) comment on bug #1688: reinit used in a when …
- 15:03 Ticket #1688 (Backend - Reinit of non-state variables) updated by
- Nice. You can recover the test case from #51. I have already removed …
- 14:58 Ticket #1688 (Backend - Reinit of non-state variables) updated by
-
Cc changed
We might catch the reinint in when initial in the front-end. I'll … - 14:54 Ticket #1688 (Backend - Reinit of non-state variables) updated by
-
Cc changed
- 14:46 Ticket #1971 (Backend - Errors in return values in functions with two outputs) created by
- Functions with two outputs, where the first output is a scalar and the …
- 14:21 Ticket #1688 (Backend - Reinit of non-state variables) updated by
- look also for #51. There is reinit used in a when initial() clause: …
- 14:16 Ticket #1688 (Backend - Reinit of non-state variables) updated by
-
Cc, Component, Description changed
- 14:15 Ticket #51 (Backend - reinit() is not accepted) updated by
-
Component changed
I guess, that is no valid Modelica code. - 12:32 Ticket #1965 (Backend - TriggeredSampler model doesn't switch properly) closed by
- fixed: fixed in r14235.
- 04:36 Ticket #1959 (Backend - Modelica.Blocks.Routing.Extractor doesn't work) closed by
- fixed: fixed in r14235.
2012-12-04:
- 15:13 Ticket #1811 (Frontend - Wrong equation count in Fluid source model with zero ports) closed by
- fixed: Works with OMC r14198
- 11:28 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Yes, the old instantiation is still used for typing when using the …
- 11:25 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- The last comment of #1405 says the issue is fixed by "+d=sCodeInst" …
- 11:11 Ticket #1970 (Backend - Multibody Visualizers type error) updated by
- Duplicate of #1405.
- 10:46 Ticket #1970 (Backend - Multibody Visualizers type error) created by
- The model contained in the attached file outputs a type mismatch error …
- 09:28 Ticket #1964 (Backend - Bound Parameter Expression unfixed) closed by
- fixed: solved in r14225
- 08:50 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
- The optimization method (e.g. nelder_mead_ex) is meaningless if the …
- 08:43 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
- If I run the system with +d=solveinitialsystem, I get no error and a …
- 08:35 Ticket #1967 (Run-time - Modelica.Mechanics.MultiBody.Examples.Loops.EngineV6) updated by
-
Cc changed
I ran the model with Visual Studio to debug the model a bit more. It …
Note:
See TracTimeline
for information about the timeline view.
