Timeline
2014-02-10:
- 23:42 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Ok. We'll leave it like this and then people will have to fix their models.
- 23:29 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > Just a small comment: using …
- 23:13 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- We do... `Notification: Modelica language version set to 3.2 due to …
- 23:10 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Maybe we can print a warning if the language standard get increased by …
- 23:05 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Just a small comment: using
+std=3.1is not very good. As if you … - 22:53 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) closed by
- fixed
- 22:53 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Fixed in r19044.
- 22:29 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Discussed this with Lennart. Conclusions: keep option to ignore the …
- 19:27 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Well... It would break MSL 3.2.1 semantics. Could even make it …
- 19:24 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Fair enough. But don't tell the AVM and ThermoSysPro developers, let …
- 19:22 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to casella: > Summing up, my humble proposal is …
- 19:15 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Sorry guys, I don't agree with this proposal (comment:48). I try to …
- 17:35 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I suggest to call it "DymolaFriendly" or "nonPedantic" flags.
- 15:18 Ticket #2546 (Run-time - No state simulation after 1e+08 seconds) updated by
- All of them cause chattering, but dassl is the only one that recovers. …
- 15:10 Ticket #2546 (Run-time - No state simulation after 1e+08 seconds) updated by
- Hi sjoelund.se! What do you mean with "chattering" and which solver …
- 15:06 Ticket #2546 (Run-time - No state simulation after 1e+08 seconds) updated by
- I wanted to try this using a non-dassl solver, but they stop due to …
- 14:54 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) closed by
- fixed
- 14:54 Ticket #2571 (Interactive Environment - getSimulationOptions returns empty string) closed by
- fixed: I'm pretty sure I fixed this 4 days ago…
- 13:28 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- We discussed this in today’s weekly OMDev meeting: I will change the …
- 11:31 Parallelization edited by
- (diff)
- 11:29 Parallelization edited by
- (diff)
- 11:21 Parallelization created by
- 11:21 WikiStart edited by
- (diff)
- 11:20 WikiStart edited by
- (diff)
- 11:19 WikiStart edited by
- (diff)
- 10:25 Ticket #2570 (Interactive Environment - list API makes the model invalid) closed by
- fixed
- 10:25 Ticket #2570 (Interactive Environment - list API makes the model invalid) updated by
- Fixed in r19028.
- 09:12 Ticket #2577 (Backend - derivatives start-value) updated by
-
Summary changed
BTW: it is the same of all other derivatives. - 08:37 Ticket #2577 (Backend - derivatives start-value) updated by
- Good question ... I think, we should share/propagate start values …
- 08:27 Ticket #2577 (Backend - derivatives start-value) updated by
-
Cc changed
- 08:27 Ticket #2577 (Backend - derivatives start-value) created by
- Modelica.Media.Examples.ReferenceAir.DryAir1 says > Warning: Iteration …
2014-02-09:
- 14:19 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to sjoelund.se: > It means a warning (a …
- 14:16 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- It means a warning (a diagnostic message) is supposed to be output …
- 14:08 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I know changing the spec is not trivial but from my point of view Spec …
- 13:36 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to jfrenkel: > Maybe it is a good proposal to MA …
- 13:23 Ticket #2576 (Backend - Partial Function Evaluation in Backend for Spice3) updated by
- Start with creating a mapping of which input variable(s) are required …
- 13:12 Ticket #2413 (Code Generation - Any way to put initialAnalyticJacobian information in an XML or other file?) updated by
- Instead of tackling the jacobian, I'd suggest that we work on #2576. …
- 13:10 Ticket #2519 (Frontend - constant evaluation of spice3 functions fails, needed for Inverter example) updated by
- On why the model doesn't simulate in omc I would like to point to #2576
- 13:09 Ticket #2576 (Backend - Partial Function Evaluation in Backend for Spice3) created by
- Volker and I had a look at the Inverter Model and found out why it …
- 13:01 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Maybe it is a good proposal to MA to remove fixed from the parameter …
- 12:56 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- SimulationX seems to use the binding. Also for me the binding is …
- 12:11 Ticket #2574 (Backend - mark parameters without a default binding changeable for OMEdit) closed by
- fixed: fixed in r19025.
- 07:32 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- No, Dymola ignores the binding, copies the start value to x (because …
- 07:30 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- So Dymola actually ignores the binding and uses the start value as the …
- 07:30 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Opened ticket m:#1417 on Modelica Trac about this.
- 07:24 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > Why do we initialize x and p with 0? …
- 07:15 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Maybe we should open a ticket about this on Modelica Trac. I'll do that.
- 07:15 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Why do we initialize x and p with 0? We ignore the binding so we …
- 01:04 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) reopened by
- Well, the previous example was a bit unnatural. Please check out the …
- 00:44 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I recommend to revert the changes from r19022. I know that Dymola …
2014-02-08:
- 19:50 Ticket #2575 (Backend - missing edges in dumping graphml files) closed by
- fixed: fixed in r19023.
- 19:39 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Lennart, I understand that, but seems there are some models out there …
- 19:35 Ticket #2575 (Backend - missing edges in dumping graphml files) updated by
-
Status, Owner changed
- 19:24 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > Changed the heuristics on this bug …
- 18:05 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- With this new heuristic we get 10 more AVM models to simulate. Weird.
- 17:19 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Changed the heuristics on this bug in r19022. - if fixed=false, no …
- 16:02 Ticket #2575 (Backend - missing edges in dumping graphml files) created by
- In the following graphml file is a edge missing: […] In the graphml …
- 11:59 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- Sorry, I should have been more precise in defining the test model, but …
- 10:07 Ticket #2140 (Backend - Enable Tearing by default) updated by
- Are there any news on this topic?
2014-02-07:
- 13:41 Ticket #2574 (Backend - mark parameters without a default binding changeable for OMEdit) updated by
-
Cc changed
- 13:38 Ticket #2574 (Backend - mark parameters without a default binding changeable for OMEdit) updated by
-
Cc changed
- 13:37 Ticket #2572 (Backend - Generates an internal error) updated by
-
Well, the error messages generated with
+tare probably … - 13:35 Ticket #2574 (Backend - mark parameters without a default binding changeable for OMEdit) updated by
-
Status changed
- 13:35 Ticket #2574 (Backend - mark parameters without a default binding changeable for OMEdit) created by
- Parameters without a binding are not changeable in OMEdit. For …
- 11:29 Ticket #2421 (OMEdit - OMEdit gdb debugging - desired features) updated by
-
Cc changed
- 09:36 Ticket #2573 (Backend - Angles for Modelica.Mechanics.MultiBody.Parts.FixedRotation not ...) created by
- When the rotationType of the …
- 08:26 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- If possible, i think we should. Give a warning if is not conform to …
- 08:22 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Okay. Then we do not need to create a Modelica ticket. But we do not …
- 08:20 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Well, the thing is that it might be compliant with Modelica Spec 3.1. …
- 08:17 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- If it is not in compliance with the Modelic specification, we do not …
- 08:11 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- What do we do about: MSL 3.1, …
- 08:01 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- There is no question: It is not.
- 07:59 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) closed by
- fixed: Fixed in r19014. The question that remains is if this: […] is …
- 07:11 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- The only reasonable way to interpret that if it was a parameter is an …
- 07:04 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Ok then. But we can tell that to the user and try to continue if …
- 06:59 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- But it is confirm to the Modelica specification. That are model issues …
- 06:56 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- We can follow the specification by giving a warning: […] otherwise …
- 06:49 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- btw: This is also an issue of ThermoSysPro and probably a couple of …
- 06:46 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- No, we shouldn’t. Or is there a section about it in the spec? I guess …
- 06:37 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Gee. I flattened MSL 3.2.1 InitSpringConstant and the error is for MSL …
- 06:22 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Cc changed
Hm. I think this is a back-end problem somehow: instantiateModel give … - 06:10 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
- I don't think is needed to be done like this. I think it will work if …
2014-02-06:
- 17:48 Ticket #2572 (Backend - Generates an internal error) updated by
-
Status, Owner changed
Go Lennart. No sleep for you until you fix it. With the full model … - 17:27 Ticket #2572 (Backend - Generates an internal error) updated by
- Yes, the flattened code is: […] Which obviously the backend does …
- 17:24 Ticket #2572 (Backend - Generates an internal error) updated by
- Nothing is using integer indices that I know of. If you know …
- 17:16 Ticket #2572 (Backend - Generates an internal error) updated by
-
Cc changed
This is indeed giving bad error-messages. With default settings I got: … - 16:13 Ticket #2572 (Backend - Generates an internal error) created by
- This model generates in internal error. I'm using OM r18788 on …
- 15:26 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- Should work fine in r18999.
- 13:57 Ticket #2571 (Interactive Environment - getSimulationOptions returns empty string) updated by
-
Component changed
- 13:57 Ticket #2571 (Interactive Environment - getSimulationOptions returns empty string) created by
- Try the attached model & script. The Interval option in the model …
- 13:51 Ticket #2570 (Interactive Environment - list API makes the model invalid) created by
-
The list API removes the parenthesis of
annotation. Run the … - 11:58 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- Good, now fix it :)
- 11:57 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- I see. ThermoPower.Examples.BraytonCycle.ClosedLoopSimulator […] …
- 11:50 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- Tested Library: ThermoPower 3.1 revision 240
- 11:50 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- We only use the trunk version of ThermoPower 3.1 :)
- 11:46 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- I get the follwoing Errors using omc 1.9.1+dev (r18989) (RML version) …
- 11:45 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- No, we cannot put all libraries in there :) It's under …
- 11:41 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- Ohh, yes. Shouldn't become the whole library part of the test suite?
- 11:29 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- Those are old total models in the testsuite... Not the new ones that …
- 09:45 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- It seems that you point to two different examples: 1. …
- 09:33 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
- I created a new test for this ticket here: …
- 06:19 Ticket #2569 (Code Generation - Problem with code generation - external functions with records) updated by
- If your small problem replicates the model, OpenModelica does the …
2014-02-05:
- 23:54 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > Ok. Seems we handle this badly in …
- 23:45 Ticket #2569 (Code Generation - Problem with code generation - external functions with records) updated by
-
Status, Owner changed
I have now understood the root cause of the problem, and I've been … - 23:09 Ticket #2569 (Code Generation - Problem with code generation - external functions with records) created by
- Please try to compile the TestStatesSat model below […] using …
- 22:54 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
- I have found a very simple workaround: I just redeclare all those …
- 17:51 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) updated by
- Forget it, it works fine now. I used another older omc. It works as …
- 17:21 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) updated by
- I got an: […] but I might need to run make clean :)
- 17:13 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) closed by
- fixed: Replying to adrpo: > I'll assign this to Per as he changed …
- 17:06 Ticket #2386 (Frontend - Erroneous constant evaluation of condition in assert relating to connectors) updated by
-
Status, Owner changed
I'll assign this to Per as he changed cardinality today and he can … - 16:25 Ticket #2062 (Frontend - Cardinality reports one but should report two) updated by
- Fixed in r18987.
- 15:27 Ticket #1048 (Run-time - delay gives wrong result for discrete signals (from MathCore)) updated by
-
Owner changed
I get the following message: […] There is something wrong with the … - 15:13 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Status, Owner changed
- 15:13 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) reopened by
- Ok. Seems we handle this badly in the front-end and we don't give the …
- 14:42 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I agree that this is bad, but I think we cannot remove it yet. The …
- 14:37 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to adrpo: > I think the reason for the binding is …
- 14:33 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to lochel: > The name "p" should be "spring.c". …
- 14:32 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- I think the reason for the binding is that the front-end added it from …
- 14:30 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- The name "p" should be "spring.c". That was a mistake in my commit and …
- 14:20 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Replying to lochel: > The following model Fails due to my …
- 13:55 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- Also 1 AVM model fails (5 in total but 4 is just additional text changes).
- 13:52 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
- The following model Fails due to my last commit: …
- 13:31 Ticket #2504 (Backend - Initialization: start value which is an unfixed parameter) reopened by
- Unfortunately, this doesn't completely fix my problem. Consider the …
- 13:26 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) closed by
- fixed: Fixed in r18982. I added the recommended warning: […] The model …
- 12:11 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- numberOfIntervals is an integer (like 500 number of intervals). …
- 10:33 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
-
Yes, you are right. Version 3.2 Revision 2 does have
Interval… - 06:18 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- You are looking at an old specification, Adeel. The new ones have the …
2014-02-04:
- 22:25 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
- Because NumberOfIntervals is not part of Modelica experiment …
- 20:51 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) created by
- If in OMEdit|Simulation Setup you check the "Save simulation settings …
- 19:50 Ticket #2567 (Backend - new rewrites don't seem to be working) updated by
- My mistake. Bad syntax in the rewrite rule.
- 19:50 Ticket #2567 (Backend - new rewrites don't seem to be working) closed by
- invalid
- 19:45 Ticket #2567 (Backend - new rewrites don't seem to be working) created by
- I imagine I'm doing something wrong, but I can't seem to get the …
- 19:16 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Status changed
- 18:21 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
-
Status, Description changed
- 18:12 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) created by
- From the Modelica spec. 3.2 rev2, sect 8.6 In the case a parameter …
- 15:32 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
-
Status, Owner, Component changed
This is front-end and not back-end. That constant should be replaced … - 15:30 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) created by
- I am trying to make the ExternalMedia library to run in OMC. The …
- 15:11 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
-
Status changed
- 15:11 Ticket #2564 (Code Generation - Problem with code generation - RealInput) updated by
-
Status changed
- 15:10 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
-
Status changed
Changing the matching algorithm does not affect the opt-module at all. … - 14:48 Ticket #2564 (Code Generation - Problem with code generation - RealInput) created by
- The model …
- 14:45 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
-
Status, Owner changed
Replying to adrpo: > Running omc without parameters or … - 14:41 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
- Running omc without parameters or with +help gives you: […]
- 14:29 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) created by
- The model ThermoPower.Examples.HRB.Simulators.OpenLoopSimulator in the …
- 14:17 Ticket #2562 (Code Generation - Problem with code generation - array in record) created by
- The compilation of model …
- 13:53 Ticket #2413 (Code Generation - Any way to put initialAnalyticJacobian information in an XML or other file?) updated by
-
Cc, Status, Owner changed
- 13:52 Ticket #2334 (Run-time - terminal + assert causes segfault) closed by
- fixed: Seems to be fixed a while back.
- 13:50 Ticket #2417 (Code Generation - Support arrayLayout) updated by
-
Status, Owner changed
- 11:27 Ticket #2561 (Backend - Misleading Errormessage for singular inital system) closed by
- fixed: Fixed in r18973. The new error message is: […]
- 09:26 Ticket #2561 (Backend - Misleading Errormessage for singular inital system) created by
- If a Modell has a singular initial system (because of the model or a …
- 09:09 Ticket #2560 (OMEdit - A suggestion for three small connecting lines improvements) updated by
- Hi, I wanted to implement the snap to grid function also for …
- 06:08 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") closed by
- fixed: make install is tested by the OSX and Linux nightly builds, including …
2014-02-03:
- 23:34 Ticket #2504 (Backend - Initialization: start value which is an unfixed parameter) closed by
- fixed: Again, this is a very good ticket. Thanks for contributing it. I …
- 23:28 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- Actually, it doesn't help. But that's because "make distclean" at the …
- 22:04 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
- Yes, I'd think it could possibly help :-). I'll try it and get back …
- 19:01 Ticket #2560 (OMEdit - A suggestion for three small connecting lines improvements) created by
- I suggest the following two improvements in how connecting lines are …
Note:
See TracTimeline
for information about the timeline view.
