Timeline
2019-02-11:
- 23:49 Ticket #5331 (Frontend - illogical "incompatible components" error in library model replica) updated by
 - 
          Component changed
 - 23:49 Ticket #5331 (Frontend - illogical "incompatible components" error in library model replica) updated by
 - The error message is actually correct, but very bad, it should include …
 - 23:07 Ticket #5331 (Frontend - illogical "incompatible components" error in library model replica) created by
 - I am trying to model and replicate the "Open Brayton Power Cycle" from …
 - 18:10 Ticket #5330 (Run-time - csvInput does not handle Integer inputs and needs an extra comma at ...) updated by
 - 
          Owner, Component, Milestone changed
 - 18:08 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - Regarding the alias conflicts, I think OMC is not behaving properly, …
 - 18:06 Ticket #5288 (*unknown* - Achieve successful simulation of 100% MSL 3.2.3 models with NF) updated by
 - Replying to perost: > Regarding #5240, the lack of …
 - 17:56 Ticket #5330 (Run-time - csvInput does not handle Integer inputs and needs an extra comma at ...) created by
 - the csvInput simulation flag has two big problems: - the last column …
 - 17:55 Ticket #5329 (OMEdit - How to group flags for code generation options in OMEdit) created by
 - The requirement of #5132 is actually just a particular case. Other …
 - 16:40 Ticket #5328 (Run-time - ODE solver behaves erratically in two MultiBody examples with dynamic ...) created by
 - 
          Steps to reproduce:
- set 
-d=newInst,stateselection- simulate … - 14:40 Ticket #5327 (OMEdit - zoom factor in OMEdit animation) created by
 - I'm simulating a small system (maximum size about 0,01 m) and finding …
 - 14:38 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - Replying to thomas.marx: Most models that can't be …
 - 14:06 Ticket #5315 (FMI - Compiler fails when model has a long fileNamePrefix) updated by
 - This problem has no easy solution. Maybe we could support windows long …
 - 14:00 Ticket #5315 (FMI - Compiler fails when model has a long fileNamePrefix) updated by
 - 
          Summary changed
The problem affects not only FMUs export but also normal compilation - 13:57 Ticket #5288 (*unknown* - Achieve successful simulation of 100% MSL 3.2.3 models with NF) updated by
 - Regarding #5240, the lack of function evaluation for external …
 - 13:09 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - Replying to thomas.marx: > Rewriting the if-equations …
 - 09:26 Ticket #5326 (OMEncryption - For an encrypted component with inputs and outputs, the connections ...) updated by
 - 
          Status, Owner, Component, Milestone changed
 - 09:00 Ticket #5326 (OMEncryption - For an encrypted component with inputs and outputs, the connections ...) created by
 - In OMedit, if you drag an encrypted component with inputs and outputs …
 - 08:14 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - Rewriting the if-equations solved the backend problems for many …
 
2019-02-10:
- 20:27 Ticket #5291 (OMEdit - Issue with ...) updated by
 - The problem when opening the model with d=-newInst is now fixed, all …
 - 20:06 Ticket #5296 (Third-Party Libraries - Support of MSL 3.2.3) updated by
 - Some patches are needed. - For some derivative functions …
 - 19:11 Ticket #5288 (*unknown* - Achieve successful simulation of 100% MSL 3.2.3 models with NF) updated by
 - 
          Description changed
 - 19:00 Ticket #5296 (Third-Party Libraries - Support of MSL 3.2.3) updated by
 - 
          Priority changed
 - 18:59 Ticket #5296 (Third-Party Libraries - Support of MSL 3.2.3) updated by
 - 
          Description changed
 - 18:56 Ticket #5296 (Third-Party Libraries - Support of MSL 3.2.3) updated by
 - 
          Description changed
 - 18:51 Ticket #5325 (New Instantiation - Inheritance issue in Buildings with the NF?) created by
 - Please check …
 - 18:45 Ticket #5324 (New Instantiation - Incorrect final detected by NF?) created by
 - Please check …
 - 18:36 Ticket #5323 (New Instantiation - NFCeval.evalLogicUnaryNot fails to evaluate expression in Buildings model) created by
 - Please check …
 - 18:34 Ticket #5322 (New Instantiation - NFScalarize.scalarize fails to evaluate expression in Buildings model) created by
 - Please check …
 - 18:09 Ticket #5321 (New Instantiation - The NF does not handle overconstrained connections correctly) created by
 - Please check …
 - 17:57 Ticket #5320 (New Instantiation - Issue with binding equation types in the NF) created by
 - Please check …
 
2019-02-08:
- 20:31 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - It does: …
 - 18:13 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - @Karim, please make sure with @adrpo or @sjoelund.se that Hudson …
 - 18:12 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
 - Replying to Karim.Abdelhak: > Fixed in …
 - 10:46 Ticket #5044 (OMEdit - Choice of C compiler on OMEdit under Linux is currently confusing) closed by
 - fixed
 - 10:35 Ticket #5274 (OMEdit - Allow opening the transformation debugger upon successful simulation) closed by
 - fixed: Done in b09a4f0/OMEdit.
 - 10:05 Ticket #5275 (Backend - Backend issues with ThermalSeparation library) updated by
 - 
          Description changed
 - 09:48 Ticket #5303 (Backend - Should the default for --maxMixedDeterminedIndex be increased?) updated by
 - Fixed in …
 - 09:48 Ticket #5303 (Backend - Should the default for --maxMixedDeterminedIndex be increased?) closed by
 - fixed
 - 09:47 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
 - Fixed in …
 - 09:46 Ticket #5319 (New Instantiation - Visualization is not working with new frontend) created by
 - 
          The model visualization file 
model_visual.xmlis empty when … - 09:45 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) closed by
 - fixed
 
2019-02-07:
- 20:22 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - You can take the nighties from Feb 4 or Feb 5 and they should be fine …
 - 20:19 Ticket #5318 (FMI - Dynamic linking fails while building FMU) closed by
 - fixed: This should fix it so the nightly from tomorrow should work fine: …
 - 20:12 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - 
          Cc, Status, Owner changed
Seems Per reverted my changes to 3rdParty and that reintroduced the … - 20:07 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - No need, seem somebody broke it again as we can see from the Windows …
 - 20:06 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - Ok. Is time to check this again. I will install the latest nightly and …
 - 19:43 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - Wait, I already have the latest one! Just downloaded today at …
 - 17:05 Ticket #4573 (OMEdit - Message browser initially not shown in Linux) updated by
 - 
          Milestone changed
 - 17:04 Ticket #4573 (OMEdit - Message browser initially not shown in Linux) closed by
 - invalid: The startup warning messages that show up in Linux are fixed as part …
 - 17:00 Ticket #4286 (OMEdit - A very frequent strange message in OMEdit (Mac OS)) closed by
 - fixed: See ticket:5122#comment:13
 - 16:58 Ticket #5122 (OMEdit - Error message on mac) closed by
 - fixed: This is a Qt bug which …
 - 16:56 Ticket #5048 (OMEdit - Wrong error messages) closed by
 - fixed: > 1) opening message under Linux > message when opening OMEdit …
 - 16:27 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - Strange. What version have you installed? Could it be that is one …
 - 16:23 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - I re-made a clean install. I usually install in C:\OpenModelica and …
 - 14:58 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - Yes, it is the same problem. I hit the problem with the FMU, but the …
 - 14:36 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - Something seems wrong with your installation. Which version of OM do …
 - 14:33 Ticket #5318 (FMI - Dynamic linking fails while building FMU) updated by
 - In the attachment the log of the build. I cannot share the source …
 - 14:32 Ticket #5318 (FMI - Dynamic linking fails while building FMU) created by
 - I'm on Win10: I get this two errors when I link dynamically, with …
 - 08:34 Ticket #5235 (Code Generation - Tuple call with array argument can cause invalid code to be generated) closed by
 - fixed: Fixed by PR #2919
 - 08:13 Ticket #4645 (OMEdit - Use blank pixels around lines to enhance readability) updated by
 - See also #4839
 - 08:07 Ticket #5314 (OMEdit - Openmodelica corrupts files during save operation) updated by
 - 
          You may attach the 
omeditcommunication.logfile to this ticket … - 08:06 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - Actually, milestone has no real meaning here: they are rebuilt also …
 - 08:04 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
 - @Karim, I guess you should assign someone with admin rights as a …
 - 08:02 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) reopened by
 - I'll keep this open until it's merged into master
 - 08:00 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) closed by
 - fixed: Excellent. Thanks Karim!
 - 07:57 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - 
          Milestone changed
 - 06:57 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - That seems to have worked fine for Fedora and CentOS7, but CentOS6 is …
 
2019-02-06:
- 14:46 Ticket #5048 (OMEdit - Wrong error messages) updated by
 - Should be fixed with PR: …
 - 13:41 Ticket #4369 (OMEdit - Improper use of square brackets) closed by
 - fixed: Done in 8db5bf7/OMEdit.
 - 12:58 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
 - We do highlight the connection on selection i.e., when you select the …
 - 12:35 Ticket #5314 (OMEdit - Openmodelica corrupts files during save operation) updated by
 - Can you provide some test use case? I personally didn't encounter any …
 - 10:46 Ticket #5048 (OMEdit - Wrong error messages) updated by
 - 
          Cc changed
> 4) flange_a falsely reported as missing > If we open … - 10:07 Ticket #4226 (OMEdit - Reusing debug config name overwrites old config) closed by
 - 
          worksforme: This is not valid anymore. When I go to rename 
test1totest2I … 
2019-02-05:
- 19:47 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
 - In PR2920 i …
 - 19:47 Ticket #5303 (Backend - Should the default for --maxMixedDeterminedIndex be increased?) updated by
 - I pushed it to 10 in …
 - 16:37 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - I'm trying this commit on our build system (disabling auto-provides; …
 - 14:57 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - […] Didn't seem to work :(
 - 13:18 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - We can't remove the requires though (or the correct dependencies would …
 - 12:05 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - 
          Status, Owner changed
 
2019-02-04:
- 22:44 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
 - 
          Description changed
 - 20:54 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
 - 
          Cc changed
 - 20:36 Ticket #5317 (*unknown* - RPM's might have too many provides) created by
 - The rpm's provided by openmodelica has provides of many bundled …
 - 20:22 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
 - > Yes, but that gives you no information on where the connection runs …
 - 15:28 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
 - Replying to anonymous: > If you leave the mouse pointer on …
 - 15:21 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) created by
 - Sometimes the back-end stops with this error: […] see, e.g., …
 - 14:55 Ticket #5242 (Testing Framework - PowerSystems should be updated to 1.0.0 in ...) updated by
 - Thanks Ruediger!
 - 13:32 Ticket #5315 (FMI - Compiler fails when model has a long fileNamePrefix) updated by
 - 
          Summary changed
 - 13:31 Ticket #5315 (FMI - Compiler fails when model has a long fileNamePrefix) created by
 - FMU export (with buildModelFMU) fails when model name is too long. …
 - 13:16 Ticket #5242 (Testing Framework - PowerSystems should be updated to 1.0.0 in ...) closed by
 - fixed: There was a wrong link in README.md that I had updated on Dec 27. Now …
 - 10:08 Ticket #5314 (OMEdit - Openmodelica corrupts files during save operation) created by
 - When saving, sometimes the GUI freezes and crashes. OmEdit has to be …
 - 07:41 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
 - If you leave the mouse pointer on a connection for two seconds you see …
 
  Note:
 See   TracTimeline
 for information about the timeline view.
    