Timeline
2015-01-24:
- 23:11 Ticket #3098 (OMEdit - plot colours) created by
- In OMEdit, the default colours of plot for 3rd and 4th variables, I …
2015-01-23:
- 22:17 Ticket #3097 (*unknown* - Relational operators give inconsistent results) updated by
-
Description changed
Please not, == on Real numbers is only allowed inside function. If … - 21:58 Ticket #3097 (*unknown* - Relational operators give inconsistent results) created by
- In the following model, relational operators give inconsistent results …
- 13:33 Ticket #3096 (Frontend - Prototype for dot operator) closed by
- fixed: Fixed in r24168.
- 13:33 Ticket #3096 (Frontend - Prototype for dot operator) updated by
-
Status, Owner changed
- 13:18 Ticket #3096 (Frontend - Prototype for dot operator) created by
- Implement a dot operator prototype (disabled for +std=3.3 and below), …
- 12:47 Ticket #3095 (Frontend - Losing class modifiers during flattening) updated by
- Yes. Seems similar to #3051. I think it only happens if you have a …
- 11:41 Ticket #3095 (Frontend - Losing class modifiers during flattening) updated by
- Is that also connected to #3051?
- 10:09 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) closed by
- fixed: Works as of …
- 10:04 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) updated by
-
Owner, Component changed
- 09:59 Ticket #3091 (Backend - Nonlinear equation system of size 1) updated by
- side effect = e.g. other tearing
- 09:58 Ticket #3091 (Backend - Nonlinear equation system of size 1) reopened by
- I will partial revert r24150, there some side effect, if we …
- 09:24 Ticket #3087 (Backend - Warn about iteration variables with default values) closed by
- invalid: The original claim of this ticket (i.e., that some iteration variables …
- 05:48 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
- Added #3095 about loosing the class modifier.
- 05:47 Ticket #3095 (Frontend - Losing class modifiers during flattening) updated by
-
Cc changed
- 05:47 Ticket #3095 (Frontend - Losing class modifiers during flattening) updated by
-
Status, Owner, Description changed
- 05:46 Ticket #3095 (Frontend - Losing class modifiers during flattening) created by
- Flattening: ModelicaTest.Fluid.TestComponents.Sensors.TestTemperature1 …
- 05:42 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
- Flattening ModelicaTest.Fluid.TestComponents.Sensors.TestTemperature1 …
- 00:11 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
-
Cc changed
Ooops, I was looking for the warning in the simulation log, while of …
2015-01-22:
- 21:21 Ticket #3094 (Run-time - XML Parse of output gives error) updated by
- Apparently, "<" is not a valid XML character, so it should not be …
- 19:02 Ticket #3094 (Run-time - XML Parse of output gives error) updated by
- I realized that column 520 is the equal sign in: "boundary.medium.MM …
- 16:58 Ticket #3094 (Run-time - XML Parse of output gives error) created by
- When I run the attached model, it compiles and runs. However the …
- 15:44 Ticket #3091 (Backend - Nonlinear equation system of size 1) closed by
- fixed
- 15:44 Ticket #3091 (Backend - Nonlinear equation system of size 1) updated by
-
Status, Owner changed
- 15:18 Ticket #3091 (Backend - Nonlinear equation system of size 1) updated by
- fixed in r24150 for simulation, fixed in r24157 for initialization. …
- 12:49 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) updated by
-
Summary changed
- 12:48 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) updated by
-
Status, Owner, Component changed
Note thatomc +d=-scodeDepneeds to be used since otherwise some … - 12:46 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) updated by
- Attached the Dymola MSL 1.6->2.2->3.2 conversion. It goes into …
- 12:11 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) updated by
- Dymola can simulate the WasteWater examples, and is probably the only …
- 12:02 Ticket #3093 (Third-Party Libraries - WasteWater simulation not possible) created by
- I've been trying to somehow find a to run and simulate the model for …
2015-01-21:
- 22:37 Ticket #2669 (Code Generation - Unnecessary function call for returning arrays) closed by
- fixed: fixed in r24138.
- 22:36 Ticket #2669 (Code Generation - Unnecessary function call for returning arrays) updated by
-
Status, Owner changed
- 16:10 Ticket #95 (Frontend - I get "Stack overflow!" during instantiation (or parsing?)) closed by
- worksforme
- 16:08 Ticket #95 (Frontend - I get "Stack overflow!" during instantiation (or parsing?)) updated by
- This is a historical, very old ticket. But I think it can be closed …
- 14:05 Ticket #3092 (Backend - BackendDAECreate.mergeWhenCluases fails for more than one elsewhen) closed by
- fixed
- 14:05 Ticket #3092 (Backend - BackendDAECreate.mergeWhenCluases fails for more than one elsewhen) updated by
- fixed in r24134.
- 13:36 Ticket #3092 (Backend - BackendDAECreate.mergeWhenCluases fails for more than one elsewhen) updated by
-
Status, Owner changed
- 11:37 Ticket #3092 (Backend - BackendDAECreate.mergeWhenCluases fails for more than one elsewhen) created by
- See following example: […]
- 10:06 Ticket #3075 (*unknown* - omc +help=debug doesn't work) closed by
- fixed: The issue should now be fixed in r24126. The description for the …
2015-01-20:
- 19:34 Ticket #3075 (*unknown* - omc +help=debug doesn't work) updated by
-
Status, Owner changed
Replying to adrpo: > I think that Util.stringWrap somehow … - 19:08 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
- I get the following omc output: […] If +d=initialization is used, …
- 18:42 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
- Just found one: …
- 18:37 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
- The reason why I filed this ticket is that yesterday Willi pointed out …
- 18:23 Ticket #3075 (*unknown* - omc +help=debug doesn't work) updated by
- I think that Util.stringWrap somehow fails if the inWrapLength is 80 …
- 17:49 Ticket #3075 (*unknown* - omc +help=debug doesn't work) updated by
- With r24120 on Windows (Msys terminal) I get: […] Note that: […] …
- 15:22 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) closed by
- fixed
- 15:22 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) updated by
- Well, it was my mistake. I trusted Dymola, but I had a large model in …
- 14:11 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
- If there are iteration variables without explicitly given start-values …
- 14:07 Ticket #3091 (Backend - Nonlinear equation system of size 1) created by
- Nonlinear equation system of size 1 do not show up in the backend as …
- 12:52 Ticket #3075 (*unknown* - omc +help=debug doesn't work) updated by
- Replying to casella: > The situation is actually much …
- 07:31 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) reopened by
- 07:29 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) updated by
- I have a new case in which the count of equations and variables seems …
- 01:53 Ticket #3090 (OMEdit - OMEdit Spanish User Interface) created by
- After selectig Spanish language for OMEdit and restar the application …
2015-01-19:
- 22:53 Ticket #3089 (New Instantiation - Flattening error concerning records of records) created by
- Consider the attached Save Total file. When compiling, eventually OMC …
- 22:44 Ticket #3088 (New Instantiation - Error in inner/outer lookup) updated by
- Probably nothing wrong with the model and this is an OMC bug. In some …
- 22:39 Ticket #3088 (New Instantiation - Error in inner/outer lookup) created by
-
Consider the model
Cryogenics.Test.CentrifugalPumpcontained in … - 19:30 Ticket #3087 (Backend - Warn about iteration variables with default values) updated by
-
Status, Owner changed
I generate such warnings already for a long time during … - 18:41 Ticket #3075 (*unknown* - omc +help=debug doesn't work) updated by
- The situation is actually much worse, when using Windows (apparently …
- 18:34 Ticket #3087 (Backend - Warn about iteration variables with default values) created by
- In many cases (e.g. thermo-fluid models), the default start attribute …
- 17:51 Ticket #3086 (OMOptim - Crash of OMOptim) updated by
-
Cc changed
- 17:36 Ticket #3086 (OMOptim - Crash of OMOptim) created by
- I use OMOptim 0.9.22747 together with OM 1.9.1. At the end of an …
- 16:21 Ticket #2777 (OMEdit - Omedit and small plots issues) updated by
- It looks like this ticket has been fixed, since in r24023 i cannot see …
- 16:04 Ticket #2676 (OMEdit - OMEdit can't manage new files in package in separate files) updated by
- Replying to Christoph <buchner@…>: > > not be able to …
- 12:58 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) updated by
- Done in r24103.
- 12:52 Ticket #3082 (Code Generation - record/array codegen error) closed by
- duplicate: see #2756
- 12:50 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) updated by
- Seem to be similar to #3082.
- 12:29 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) updated by
- > > Something is rotten in the state of denmark... ehm... …
- 12:25 Ticket #2676 (OMEdit - OMEdit can't manage new files in package in separate files) updated by
- > not be able to install a newer version are you saying this works in …
- 11:57 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) updated by
- BTW, I hadn't noticed that if I hover over one equation in the …
- 11:32 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) updated by
- Replying to adeas31: > All windows have horizontal …
- 11:22 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) updated by
- Replying to casella: > In fact, the Source Browser window …
- 11:20 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) updated by
- All windows have horizontal sliders. Why they are not visible is …
- 11:07 Ticket #2971 (*unknown* - Translation hangs) closed by
- invalid: Closing as invalid, since there's simply not enough information to …
- 10:59 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) updated by
- In fact, the Source Browser window has automatic wrapping, which is …
- 10:52 Ticket #3085 (OMEdit - All windows in the Transformational Debugger should have a horizontal ...) created by
- Some windows in the Transformational debugger cannot be scrolled …
2015-01-18:
- 14:45 Ticket #2996 (Backend - This very simple circuit fails) updated by
-
Status, Owner changed
Willi, can you have a look? - 14:42 Ticket #3084 (*unknown* - Under-determined linear system not solvable!) updated by
-
Status, Owner changed
- 12:34 Ticket #2661 (OMEdit - annotation(Dialog(enable = ...)) is not working correctly) updated by
- Tested the attached example with r24056 under Ubuntu 14.04 and noticed …
- 12:24 Ticket #3003 (OMEdit - OMEdit crashes when trying to open a Modelica file) updated by
- I switched from Ubuntu 12.04 to 14.04 in order to avoid this issue. …
- 12:16 Ticket #3084 (*unknown* - Under-determined linear system not solvable!) created by
- I noticed that the simulation of one the following examples in …
2015-01-17:
- 16:37 Ticket #3083 (Third-Party Libraries - Replace LAPACK/BLAS) updated by
- OMC works fine using ATLAS last I checked. Anyway, the routines are …
- 16:31 Ticket #3083 (Third-Party Libraries - Replace LAPACK/BLAS) created by
- To increase the portability of OM you should replace all non ANSI-C …
Note:
See TracTimeline
for information about the timeline view.
