Timeline
2014-02-04:
- 22:25 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) updated by
 - Because NumberOfIntervals is not part of Modelica experiment …
 - 20:51 Ticket #2568 (OMEdit - NumberOfIntervals Issue in OMEdit (R18954)) created by
 - If in OMEdit|Simulation Setup you check the "Save simulation settings …
 - 19:50 Ticket #2567 (Backend - new rewrites don't seem to be working) updated by
 - My mistake. Bad syntax in the rewrite rule.
 - 19:50 Ticket #2567 (Backend - new rewrites don't seem to be working) closed by
 - invalid
 - 19:45 Ticket #2567 (Backend - new rewrites don't seem to be working) created by
 - I imagine I'm doing something wrong, but I can't seem to get the …
 - 19:16 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
 - 
          Status changed
 - 18:21 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) updated by
 - 
          Status, Description changed
 - 18:12 Ticket #2566 (Frontend - Parameters with fixed = false and binding equation should be reported) created by
 - From the Modelica spec. 3.2 rev2, sect 8.6 In the case a parameter …
 - 15:32 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
 - 
          Status, Owner, Component changed
This is front-end and not back-end. That constant should be replaced … - 15:30 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) created by
 - I am trying to make the ExternalMedia library to run in OMC. The …
 - 15:11 Ticket #2562 (Code Generation - Problem with code generation - array in record) updated by
 - 
          Status changed
 - 15:11 Ticket #2564 (Code Generation - Problem with code generation - RealInput) updated by
 - 
          Status changed
 - 15:10 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
 - 
          Status changed
Changing the matching algorithm does not affect the opt-module at all. … - 14:48 Ticket #2564 (Code Generation - Problem with code generation - RealInput) created by
 - The model …
 - 14:45 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
 - 
          Status, Owner changed
Replying to adrpo: > Running omc without parameters or … - 14:41 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) updated by
 - Running omc without parameters or with +help gives you: […]
 - 14:29 Ticket #2563 (Backend - Problem with PFPlusExt Pantelides algorithm) created by
 - The model ThermoPower.Examples.HRB.Simulators.OpenLoopSimulator in the …
 - 14:17 Ticket #2562 (Code Generation - Problem with code generation - array in record) created by
 - The compilation of model …
 - 13:53 Ticket #2413 (Code Generation - Any way to put initialAnalyticJacobian information in an XML or other file?) updated by
 - 
          Cc, Status, Owner changed
 - 13:52 Ticket #2334 (Run-time - terminal + assert causes segfault) closed by
 - fixed: Seems to be fixed a while back.
 - 13:50 Ticket #2417 (Code Generation - Support arrayLayout) updated by
 - 
          Status, Owner changed
 - 11:27 Ticket #2561 (Backend - Misleading Errormessage for singular inital system) closed by
 - fixed: Fixed in r18973. The new error message is: […]
 - 09:26 Ticket #2561 (Backend - Misleading Errormessage for singular inital system) created by
 - If a Modell has a singular initial system (because of the model or a …
 - 09:09 Ticket #2560 (OMEdit - A suggestion for three small connecting lines improvements) updated by
 - Hi, I wanted to implement the snap to grid function also for …
 - 06:08 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") closed by
 - fixed: make install is tested by the OSX and Linux nightly builds, including …
 
2014-02-03:
- 23:34 Ticket #2504 (Backend - Initialization: start value which is an unfixed parameter) closed by
 - fixed: Again, this is a very good ticket. Thanks for contributing it. I …
 - 23:28 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - Actually, it doesn't help. But that's because "make distclean" at the …
 - 22:04 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - Yes, I'd think it could possibly help :-). I'll try it and get back …
 - 19:01 Ticket #2560 (OMEdit - A suggestion for three small connecting lines improvements) created by
 - I suggest the following two improvements in how connecting lines are …
 
2014-02-02:
- 02:15 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) closed by
 - fixed: Fixed in r18932. Included the line number info too.
 
2014-02-01:
- 19:47 Ticket #2559 (Code Generation - Info XML does not set info tag) closed by
 - invalid
 - 19:46 Ticket #2559 (Code Generation - Info XML does not set info tag) updated by
 - You forgot one step in your script... […] You need to load the …
 - 19:40 Ticket #2559 (Code Generation - Info XML does not set info tag) created by
 - The info tag is invalid for newly added variables. Run the attached …
 - 17:56 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) reopened by
 - I would encourage Lennart to improve the warning as he planned
 - 09:57 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
 - I started a new Windows nightly so Francesco can play with it. I …
 - 09:12 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
 - Well, I should improve the warning a bit: {{{ Warning: Parameter …
 - 09:09 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) closed by
 - fixed: I added the test from above here: …
 - 08:32 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
 - 
          The function 
BackendVariable.varFixed(var)returned only true … - 08:07 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - If you check the version of OSX we use and test against: …
 - 07:43 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) updated by
 - 
          Status changed
I prepared a small model that covert hat issue: […] - 01:29 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - The attached is the part of the log file where libipopt.la is created. …
 
2014-01-31:
- 21:46 Ticket #2558 (Backend - $PRE variables in info XML are marked discrete) updated by
 - 
          Summary changed
 - 21:44 Ticket #2558 (Backend - $PRE variables in info XML are marked discrete) created by
 - All $PRE variables in the model_info.xml file are marked discrete. […]
 - 21:08 Ticket #2557 (Backend - Report parameters with fixed = true and no binding equations) created by
 - From Modelica 3.3 specification, Section 8.6: If a parameter has a …
 - 07:50 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - clang and gcc won't matter. It is libtool that creates .la-files. And …
 
2014-01-30:
- 22:14 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - You're using CLANG, I'm using gcc (OS X 10.6). In my build/lib/omc/, …
 - 14:52 Ticket #2556 (Frontend - Support qualified component references in external function definitions) updated by
 - 
          Cc changed
 - 14:44 Ticket #2556 (Frontend - Support qualified component references in external function definitions) updated by
 - The easiest way would be to just add dummy protected temp variables …
 - 14:23 Ticket #2556 (Frontend - Support qualified component references in external function definitions) updated by
 - 
          Status, Owner changed
 - 14:23 Ticket #2556 (Frontend - Support qualified component references in external function definitions) created by
 - Currently the specification says that: Spec 12.9: "The only …
 - 14:15 Ticket #2368 (Code Generation - Record with 0-length array) updated by
 - I'm talking about the "Real …
 - 14:09 Ticket #2368 (Code Generation - Record with 0-length array) updated by
 - What do you mean you cannot access variables properly? OpenModelica …
 - 13:46 Ticket #2368 (Code Generation - Record with 0-length array) updated by
 - new seems to work, but i cannot access the variables properly […]
 - 12:44 Ticket #2555 (Frontend - Missing cast for integer array) updated by
 - 
          Status, Owner changed
Current OpenModelica trunk/ actually crashes on this because we try to … - 12:05 Ticket #2555 (Frontend - Missing cast for integer array) created by
 - I have the following model that is producing an integer array that is …
 - 10:51 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - I just get this, no symlinks for the .la-file: […]
 - 10:35 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") updated by
 - 
          Status, Owner changed
 
2014-01-29:
- 23:59 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
 - The issue is that, the first run of causalization the index reduction …
 - 22:32 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
 - Okay, I will investigate this issue a bit more and reverted r18840 for now.
 - 22:30 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
 - Thank you Adrian for keeping an eye on it. @Lennart, I can have a look …
 - 22:23 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
 - The fix in r18840 breaks 5 AVM models.
 - 22:21 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
 - 
          Cc changed
 - 22:09 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) updated by
 - 
          Status, Owner changed
 - 21:41 Ticket #2554 (Build Environment - build of omc creates non-existent link which errors out "make install") created by
 - on OS X, when I do a clean build of OpenModelica (latest sources) …
 - 18:51 Ticket #2553 (Backend - encapsulateWhenConditions creates wrong independent blocks) created by
 - The post-optimize module encapsulateWhenConditions creates independent …
 - 16:22 Ticket #2552 (OMEdit - Implement total model dumping in OMEdit) updated by
 - I would also add a check-box to show annotations or not …
 - 16:20 Ticket #2552 (OMEdit - Implement total model dumping in OMEdit) created by
 - It would be nice to make it possible to do a total model dump from …
 - 15:21 Ticket #2551 (MetaModelica - Bootstrapped compiler fails to display error about duplicate ...) updated by
 - 
          Summary changed
 - 15:21 Ticket #2551 (MetaModelica - Bootstrapped compiler fails to display error about duplicate ...) created by
 - See r18836: […] This fails with an error message that variable …
 
2014-01-28:
- 13:18 Ticket #2550 (OMEdit - component parameters window) updated by
 - Replying to adeas31: > The rename components is part of …
 - 13:12 Ticket #2550 (OMEdit - component parameters window) updated by
 - 
          Status changed
The rename components is part of Attributes Window :) - 11:34 Ticket #2550 (OMEdit - component parameters window) created by
 - I am wondering why the component parameters window in OMEdit shows not …
 - 08:41 Ticket #2549 (Interactive Environment - Add gnuplot support to save plots in more formats) updated by
 - Or maybe the output should just be the .gnuplot file so it can be …
 - 08:32 Ticket #2549 (Interactive Environment - Add gnuplot support to save plots in more formats) created by
 - Add gnuplot support to save plots in more formats. Something like: …
 
  Note:
 See   TracTimeline
 for information about the timeline view.
    