Timeline
2017-08-05:
- 12:30 Ticket #4488 (Run-time - Simulation crash with optimization solver) created by
- Compilation was successfull, simulation gets next horror: …
- 10:28 Ticket #4486 (OMEdit - Report end of initialization and start of simulation in the log) updated by
- This message should always be reported, without the need of setting …
- 01:04 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
- I tested it now and it seems to be working.
- 00:13 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
-
Status, Owner changed
- 00:12 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
- I think I fixed this with: 72a076/OMCompiler …
2017-08-04:
- 23:20 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
- Can you also check if object reference file is created in the …
- 23:14 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
- I am trying to attach, but apparently I am spam.... and whatever I …
- 22:52 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
- Can you see if the file …
- 17:46 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) created by
- I have posted the issue below on Stackoverflow 2 weeks ago. I am not …
- 09:45 Ticket #4484 (Backend - Model becomes singular if equations are written inside if-else) updated by
-
Cc changed
OK, it seems the problematic part is only `tray[1].feed.mixMolFrac[:] … - 08:53 Ticket #4486 (OMEdit - Report end of initialization and start of simulation in the log) updated by
- This is reported if the flag -lv=LOG_INIT is used. This message can be …
- 08:44 Ticket #4486 (OMEdit - Report end of initialization and start of simulation in the log) created by
- When running a Modelica model simulation there are two major …
- 07:56 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- I totally understand that overwriting the settings of initial …
- 07:05 Ticket #4484 (Backend - Model becomes singular if equations are written inside if-else) updated by
- I got what you are saying, but I am not doing that. I am defining …
2017-08-03:
- 17:47 Ticket #4485 (OMEdit - Add units for volume flow to OMEdit) created by
- Currently volume flows in OMEdit are only displayed in the SI unit …
- 14:38 Ticket #4216 (Backend - rework resolveLoops) updated by
-
Priority changed
- 12:36 Ticket #2038 (Third-Party Libraries - Modelica3d Primitives are not placed/scaled correctly) closed by
- wontfix: Resolved by using our own 3D environment instead of the unmaintained …
- 12:34 Ticket #2058 (Run-time - Error: failed to read the XML file eventTests.sample2_info.xml) closed by
- worksforme: This was fixed some time ago when we switched over to json instead of …
- 12:30 Ticket #4366 (Build Environment - Error from make in omlibrary-core) closed by
- worksforme: Got no user input, closing the issue
- 12:23 Ticket #4471 (Third-Party Libraries - Support IdealizedContact Library) updated by
- Some problems fixed with …
- 11:52 Ticket #4471 (Third-Party Libraries - Support IdealizedContact Library) updated by
-
Status, Milestone changed
- 11:43 Ticket #4484 (Backend - Model becomes singular if equations are written inside if-else) updated by
-
Priority, Component changed
You should have added one working and one modified model to show the … - 08:46 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- Well, I was thinking at the actions the user will do: change numbers …
2017-08-02:
- 21:14 Ticket #4483 (Backend - Error due to bogus dynamic state selection) updated by
-
Priority changed
I have performed some further analyis. The problem is caused by the … - 18:24 Ticket #3993 (Backend - Back-end fails with MSL 3.2.2 TimeTable but works with MSL 3.2.1) updated by
- I'm having the same problem! Is there a workaround or other solution …
- 12:09 Ticket #4474 (MetaModelica - inefficient list() comprehension) closed by
- fixed: Fixed with PR1755.
- 11:02 Ticket #4484 (Backend - Model becomes singular if equations are written inside if-else) created by
- Please see the attached file. In Column1 model if I write …
- 10:48 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- So basically, you want a totally different semantics for setting the …
- 10:29 Ticket #4483 (Backend - Error due to bogus dynamic state selection) created by
- Please consider the attached test case. During compilation, OMC …
- 08:40 Ticket #4482 (*unknown* - checkAndGetAlgorithmOutputs failed) created by
- I am working on a model where multiple instantiation of model is …
2017-08-01:
- 20:22 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- My idea is that we should make it clear that values manually set in …
- 06:14 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- The problem is if you have some equation like: […] Can you still …
2017-07-31:
- 19:05 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- Replying to sjoelund.se: > […] Perhaps the only reason …
- 10:54 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- I don't think that's a good idea. Equations should hold. Perhaps the …
- 07:46 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- Maybe it is ok if we consider changeable the initial values of all …
- 06:28 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
-
I guess the bug here is that
xis marked as changeable. Is this … - 04:49 Ticket #4481 (OMEdit - Artifacts in plotting discrete simulation using synchronous Clock feature) created by
- Hi, I am testing the new Modelica_Synchronous features by building a …
2017-07-29:
- 18:42 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) updated by
- I guess the input field only overrides the start values and doesn’t …
- 16:01 Ticket #4480 (OMEdit - Initial conditions are not considered properly when applying Re-simulate) created by
- Consider the following example […] After the simulation of this …
- 10:50 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
- Another question is why for the 28x28 and bigger systems the sparse …
Note:
See TracTimeline
for information about the timeline view.
