Timeline
2019-03-05:
- 18:30 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- > It's actually the opposite, i.e. no array dimensions were expected …
- 17:04 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- Replying to ceraolo: > > since that error is given when …
- 17:00 Ticket #5376 (OMSimulator - How can I simulate my models better and more specifically?) created by
- I started modeling subsystems of the Rankine Power Cycle in an attempt …
- 16:15 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- > since that error is given when the base types are compatible but the …
- 16:08 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
-
Description changed
- 12:28 Ticket #5364 (New Instantiation - Obscure error message from NF) closed by
- fixed: Fixed in 31bdbe9.
- 10:44 Ticket #5375 (*unknown* - Command extend/redeclare for constants does not work properly OM ...) closed by
- invalid: I can't reproduce the issue you describe in the link, the model …
- 09:41 Ticket #5375 (*unknown* - Command extend/redeclare for constants does not work properly OM ...) created by
- Command extend/redeclare for constants does not work properly OM …
- 09:20 Ticket #5372 (New Instantiation - Issue with NFInst.instExpressions and protected elements) updated by
- Thank you all, it was late in the evening and I didn't have much sleep …
- 08:55 Ticket #5372 (New Instantiation - Issue with NFInst.instExpressions and protected elements) updated by
- @casella: The protected section in model …
- 00:11 Ticket #5372 (New Instantiation - Issue with NFInst.instExpressions and protected elements) closed by
-
invalid:
PhotovoltaicCoolingSystemcontains a componentstorage, which …
2019-03-04:
- 22:35 Ticket #5374 (*unknown* - How do I solve Modelica errors of variables, where the variables are ...) created by
- I've been trying to build a Rankine Power Cycle on OpenModelica for …
- 21:53 Ticket #5372 (New Instantiation - Issue with NFInst.instExpressions and protected elements) updated by
-
Cc changed
- 21:53 Ticket #5373 (New Instantiation - Issue with Ceval computing array + scalar Real expression in the NF) created by
- Please check …
- 21:41 Ticket #5372 (New Instantiation - Issue with NFInst.instExpressions and protected elements) created by
- Please check …
- 17:03 Ticket #5371 (OMSimulator - Heat Exchanger Model works & simulates but doesn't actually transfer ...) created by
- In order to properly model a Rankine Power Cycle correctly I have …
- 11:45 Ticket #5343 (OMEdit - Duplicate of read only model is also read only (but shouldn't)) closed by
- fixed: Please reopen if the issue pops up again.
- 11:44 Ticket #5369 (OMEdit - Crashing of openmodelica while operating) updated by
-
Summary changed
Please provide some more input so we can try to reproduce the failure, … - 06:00 Ticket #5343 (OMEdit - Duplicate of read only model is also read only (but shouldn't)) updated by
- I tested version […] and the issue does not appear any more. So …
2019-03-03:
- 20:02 Ticket #5370 (Backend - Modelica compiler should issue warnings when clocked equations appear ...) updated by
-
Owner, Component changed
- 19:35 Ticket #5370 (Backend - Modelica compiler should issue warnings when clocked equations appear ...) updated by
-
Description changed
- 19:30 Ticket #5370 (Backend - Modelica compiler should issue warnings when clocked equations appear ...) created by
- While working with clocked equations I found that its to easy to turn …
2019-03-02:
- 14:34 Ticket #5369 (OMEdit - Crashing of openmodelica while operating) created by
- i have been using and learning for a while but when ever i use it and …
2019-03-01:
- 16:41 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- Thanks @Casella, appreciate the feedback. I will try and reach out to …
- 16:21 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- Replying to casella: > Well, any type is also a subtype of …
- 16:06 Ticket #5368 (*unknown* - Nightly Build 1.14.0 giving odd Syntax Warnings and Effecting Old ...) created by
- In an attempt to use the ThermoPower Library correctly I recently …
- 15:08 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) closed by
- invalid
- 15:08 Ticket #5365 (*unknown* - find declared but unused variables and parameters) updated by
- Replying to anonymous: If you try to run the following …
- 15:07 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) updated by
- Replying to adeas31: > It looks like an error during the …
- 14:56 Ticket #5355 (OMEdit - OMEdit does not rename file and does not update the package.order file ...) updated by
-
Cc changed
@adeas31, could you please have a look at this and report? Is it a … - 14:11 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) updated by
- Btw on my machine the test script fails (maybe my OpenModelica needs a …
- 14:09 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) updated by
- It looks like an error during the translation phase. Do you have some …
- 13:52 Ticket #5367 (FMI - Generated FMU missing events in other tools) created by
-
When exporting BouncingBall
[…]
as ModelExchange 2.0 FMU with
omc… - 13:45 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) updated by
- It is the same model, I just copied it. I was wondering, what OMEdit …
- 13:40 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) updated by
- I wonder what is the difference between your model and FMU compared to …
- 13:28 Ticket #5366 (OMEdit - FMU Import in OMEdit for BouncingBall failes) created by
- When importing a FMU generatet for BouncingBall model […] with …
- 12:55 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- I will change the error messages as per your suggestions, and …
- 10:31 Ticket #5365 (*unknown* - find declared but unused variables and parameters) updated by
- May be he meant something like this […] as far as i know, …
- 09:19 Ticket #5365 (*unknown* - find declared but unused variables and parameters) updated by
- "They are not used anymore due to rewriting the equations" is a bit …
- 09:17 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- Well, any type is also a subtype of itself, the subtype relationship …
- 07:17 Ticket #5365 (*unknown* - find declared but unused variables and parameters) created by
- I sometimes have parameters and/or variables declared, but they are …
- 07:08 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
-
Description changed
- 06:41 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
- Replying to casella: > @ceraolo, 'Subtype of XXX' is the …
2019-02-28:
- 23:47 Ticket #5364 (New Instantiation - Obscure error message from NF) updated by
-
Status, Owner, Component, Milestone changed
@ceraolo, 'Subtype of XXX' is the technically correct description of … - 23:12 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- I recommend to always use the latest nightly build (currently …
- 22:29 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- Is it possible to look and assess the Rankine Power Cycle that I have …
- 21:58 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- I believe this is the link where I got it from . . . recommended to me …
- 21:38 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- Seems like the ThermoPower Library you downloaded from the github is …
- 21:12 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- Many .PNG files later . . . Here I hope to address both instances of …
- 21:01 Ticket #5180 (*unknown* - OMSimulator and stand-alone simulation should be able to save results ...) updated by
- To my (limited) understanding, HDF5 is just a container format, like …
- 18:48 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- This *permission denied* means that you already have …
- 18:43 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- I just downloaded the ThermoPower Library from …
- 17:19 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- Update on the inconsistent simulation: I closed out of both programs …
- 17:08 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- It's really bizarre, I have two separate OMEdit windows open right …
- 17:07 Ticket #5364 (New Instantiation - Obscure error message from NF) created by
- Consider the following code: […] When checked with the OF I get …
- 16:00 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
-
Cc, Status, Component, Owner changed
Ok, that looks like a Windows build issue (I'm using Linux myself). … - 15:56 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- I have attached the total model above. Just to be clear and concise, …
- 15:53 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- Replying to KieranF <kieran.fung@…>: > is it recommended …
- 15:34 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- is it recommended to to use 1.13.2 instead of hopping up to the latest …
- 10:46 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
-
Cc, Owner, Component changed
What are the errors that you get? I tried simulating the Rankine … - 08:46 Ticket #5362 (FMI - modelDescription doesn't include <SourceFile>) updated by
-
Well, i guess the
<CoSimulation />is just another way to write …
2019-02-27:
- 21:27 Ticket #5338 (New Instantiation - Issue with package constants in Annex60) updated by
- Replying to perost: > This is actually working, but it …
- 16:36 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) updated by
- NOTE: I have also been working off of the updated Master ThermoPower …
- 16:30 Ticket #5363 (Build Environment - Is it currently possible to create/model systems off of the ...) created by
- For a month now I've been trying to model Power Cycles, specifically …
- 14:50 Ticket #5362 (FMI - modelDescription doesn't include <SourceFile>) created by
- Hallo, according to FMI documentation page 66 […] but it is not …
- 10:43 Ticket #5338 (New Instantiation - Issue with package constants in Annex60) closed by
- fixed: This is actually working, but it seems we stopped testing Annex60 in …
2019-02-26:
- 22:50 Ticket #5015 (New Instantiation - Expandable connectors support is missing from the NF) closed by
- fixed: With the last commits by @perost, the NF implementation of expandable …
- 16:07 Ticket #5361 (Run-time - Inconsistent Variable Filter between .mat and .csv format) updated by
-
Cc, Owner, Component, Milestone changed
- 14:57 Ticket #5361 (Run-time - Inconsistent Variable Filter between .mat and .csv format) created by
- Below is an arbitary model of electrical circuit with 5 resistors. …
- 10:16 Ticket #5360 (Interactive Environment - Issues with diffModelicaFileListings) created by
-
When duplicating a class
diffModelicaFileListingsis used to …
Note:
See TracTimeline
for information about the timeline view.
.PNG){kind=link}
