Timeline
2016-03-20:
- 23:11 Ticket #3091 (Backend - Nonlinear equation system of size 1) closed by
- fixed: fixed with PR549
- 18:12 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- A couple of more commits should close Pandora's box again: 1. only …
- 16:29 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
- Using dynamic programming for getHighestDerivation: n=10000 […] …
- 15:41 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
-
Cc changed
The poor scaling in SimCode is from: […] - 15:12 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
- @casella: Should this stupid testcase be added to ScalableTestsuite as …
- 15:10 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
- With my changes: https://github.com/OpenModelica/OMCompiler/pull/548 …
- 15:00 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
-
Status, Owner changed
- 10:42 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
- The slow part seems to be …
- 10:32 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) created by
- […] n=1000 […] n=2000 […] n=10000 […] Seems to be …
- 07:38 ReleaseNotes/1.3.1 created by
- 07:36 ReleaseNotes/1.4.0 created by
- 07:35 ReleaseNotes/1.4.1 created by
- 07:34 ReleaseNotes/1.4.2 created by
- 06:43 ReleaseNotes/1.4.3 created by
- 06:41 ReleaseNotes/1.4.4 created by
- 06:40 ReleaseNotes/1.4.5 created by
- 06:39 ReleaseNotes/1.5.0 created by
- 06:36 ReleaseNotes/1.6.0 created by
- 06:34 ReleaseNotes/1.7.0 created by
- 06:30 ReleaseNotes/1.8.0 created by
- 05:43 Ticket #3780 (*unknown* - wrong array dimension size unless Evaluate=true is set) created by
- The test model …
- 05:35 Ticket #3779 (Run-time - Wrong generated code for a model of the Buildings library) created by
- The following commands give a segmentation fault on Ubuntu 14.04, 64 …
- 05:13 Ticket #3778 (*unknown* - noEvent(x>0) fails to guard against sqrt(x) for x<0) updated by
-
Description changed
- 04:41 Ticket #3778 (*unknown* - noEvent(x>0) fails to guard against sqrt(x) for x<0) created by
- Hi The regression test […] fails with "Model error: Argument of …
2016-03-19:
- 14:55 Ticket #3777 (Code Generation - Significantly reduced coverage after "fix valueReferences") created by
- Today the coverage went down significantly for basically all cpp …
- 14:20 Ticket #3774 (Build Environment - Windows Nightly Builds Unavailable) closed by
- fixed: The builds are back on: …
- 09:41 Ticket #3775 (OMEdit - Support multi-platform FMUs from OMEdit) updated by
-
Cc changed
- 09:28 Ticket #3775 (OMEdit - Support multi-platform FMUs from OMEdit) updated by
- In the case of Cpp, one has to cross compile the runtime first. It …
- 08:59 Ticket #3775 (OMEdit - Support multi-platform FMUs from OMEdit) updated by
- This would of course be better. […] gives for instance: […] This …
- 07:21 Ticket #3776 (OMEdit - Copy & paste in OMEdit) created by
- It looks like in diagram view of OMEdit it is not possible to do …
- 07:20 Ticket #3775 (OMEdit - Support multi-platform FMUs from OMEdit) updated by
- It should be possible to create a list by searching for programs in …
- 07:00 Ticket #3770 (Backend - clocked equations problem) updated by
-
Cc changed
I'd love to see this as a general rule for clocked equations, not just … - 06:25 Ticket #3762 (Frontend - OpenModelica simulation hangs for ...) updated by
- I tried with the Windows release OpenModelica v1.9.4-dev.beta2. The …
- 03:35 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- I fixed some of the issues with pre-compiled headers on msvc and the …
- 00:18 Ticket #3289 (FMI - FMU compilation (MSVC) fails for big models) updated by
- I've been trying various ways to fix this but I haven't got any …
2016-03-18:
- 23:07 Ticket #3774 (Build Environment - Windows Nightly Builds Unavailable) updated by
- There were several issues with the builds lately: 1. the build server …
- 21:52 Ticket #3775 (OMEdit - Support multi-platform FMUs from OMEdit) created by
-
A couple of months ago the command
buildModelFMUwas extended with a … - 21:34 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Once the Cpp runtime can be cross compiled, a few lines of code …
- 18:47 Ticket #3774 (Build Environment - Windows Nightly Builds Unavailable) updated by
- The windows nightly build folder is empty
- 17:17 Ticket #3774 (Build Environment - Windows Nightly Builds Unavailable) updated by
- The 64-bit versions are experimental. 32-bit should have nightly builds.
- 17:01 Ticket #3774 (Build Environment - Windows Nightly Builds Unavailable) created by
- Are the nightly builds no longer available? The last build …
- 16:38 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
-
Priority, Milestone changed
I think the quality of OM 2.0 deserves an acceptable user experience. … - 16:35 Ticket #3743 (Interactive Environment - Slowness and error in OMEdit error when resizing) updated by
-
Priority, Milestone changed
I think this issue must be considered a blocker for release 2.0. … - 16:27 Ticket #3726 (OMEdit - Unit of derived types are missing) closed by
- fixed: I have been working on #2250 and it seems this ticket is fixed as part …
- 15:57 Ticket #3773 (Interactive Environment - Do not return the sub-modifier) updated by
- This needs to be fixed for #2250. I have pushed in some support for …
- 14:47 Ticket #3289 (FMI - FMU compilation (MSVC) fails for big models) updated by
- Hello, can I inquire what the latest news is for this ticket?
- 13:37 Ticket #3773 (Interactive Environment - Do not return the sub-modifier) created by
-
getComponentModifierValuereturns the sub-modifier along with the … - 08:07 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Linux is tested very well. But the Windows users (and Bosch Rexroth …
- 07:56 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Currently we have …
- 07:48 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- I think it is important that we have a least one test for each commit …
- 06:37 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
-
Cc changed
- 06:00 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- d48d574/OMCompiler makes the target platform for the …
2016-03-17:
- 16:43 Ticket #2081 (OMEdit - Conditional connectors not handled by OMEdit) updated by
-
Priority, Milestone changed
I made this a blocker for 2.0, unless there are really compelling … - 14:41 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- I checked under Linux. Getting: […] Something might go wrong with …
- 14:11 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Ok no problem I will not revert it. I thought the dynamic runtime is …
- 14:02 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Please don't revert the changes. It was a mess with all build …
- 13:41 Ticket #3770 (Backend - clocked equations problem) updated by
- At the end of MLS 16.8.2, p. 205, it says "The initial conditions will …
- 13:38 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Now I got this error Simulation stopped with error in model factory: …
- 13:27 Ticket #3770 (Backend - clocked equations problem) updated by
- Are you sure? Where does your statement find in the Modelica spec? …
- 13:17 Ticket #3770 (Backend - clocked equations problem) updated by
- xd=0 at time=0 in Dymola. This is a clocked discretized …
- 13:04 Ticket #3640 (Build Environment - Compilation errors for Modelica.Math.FastFourierTransform.Examples.RealFFT1) closed by
- worksforme: This worked with the MSL trunk shipped with OpenModelica
- 13:02 Ticket #3640 (Build Environment - Compilation errors for Modelica.Math.FastFourierTransform.Examples.RealFFT1) updated by
- > the Modelica_Requirements library martin.otter: btw, can you say …
- 12:29 Ticket #3770 (Backend - clocked equations problem) updated by
-
Description changed
- 10:41 Ticket #3519 (Backend - test ModelTestSolve18 fail) updated by
- What is the test about? Does it test what kind of expression cannot be …
- 10:07 Ticket #3771 (Backend - Wrong clock interval) updated by
- Maybe the problem is the order of the equations. …
- 10:03 Ticket #3772 (Backend - event clock error) updated by
- See #3752 Both the C and the Cpp templates currently call the …
- 09:59 Ticket #3771 (Backend - Wrong clock interval) updated by
- See ModelicaSpec33, section 16.3 Clock Constructors: "The clock …
- 09:56 Ticket #3772 (Backend - event clock error) created by
- For the following example the clock interval is unknown in SimCode. …
- 09:55 Ticket #3770 (Backend - clocked equations problem) updated by
- See ModelicaSpec33, section 16.4 Discrete States: "The previous value …
- 09:50 Ticket #3771 (Backend - Wrong clock interval) created by
- For the following example it appears the clock interval calculation is …
- 09:47 Ticket #3770 (Backend - clocked equations problem) created by
- For the following model from the cpp runtime tests suite, it appears a …
- 07:16 Ticket #3710 (Optimization - Unlucky tearing if module wrapFucntionCalls is enabled) updated by
-
Cc changed
Replying to vitalij: > wrapFunctionCalls changes unlucky … - 05:49 Ticket #3725 (Interactive Environment - loadString merge=true create duplicate elements) updated by
- It should set it for all non-class elements (or the file merging …
2016-03-16:
- 23:18 Ticket #3519 (Backend - test ModelTestSolve18 fail) closed by
- fixed: [https://github.com/OpenModelica/OpenModelica-testsuite/commit/87f2ac12 …
- 23:02 Ticket #3710 (Optimization - Unlucky tearing if module wrapFucntionCalls is enabled) updated by
-
Status, Owner, Summary changed
wrapFunctionCalls changes unlucky the tearing set. - 18:20 Ticket #3765 (Run-time - Bad macro for semiLinear) closed by
- fixed
- 13:18 ReleaseNotes/1.9.4 edited by
- (diff)
- 13:14 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) closed by
- fixed
- 13:01 ReleaseNotes/1.9.3 edited by
- (diff)
- 12:57 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- Ok. I think we can close this bug now. We have an OpenModelica 1.9.6 …
- 12:44 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Sorry for the Windows machine being offline, I had to built v1.9.6 …
- 10:41 ReleaseNotes/1.9.2 edited by
- (diff)
- 10:38 ReleaseNotes/1.9.1 edited by
- (diff)
- 10:37 ReleaseNotes/1.9.0 edited by
- (diff)
- 10:34 ReleaseNotes/1.9.0 edited by
- (diff)
- 10:32 ReleaseNotes/1.9.4 edited by
- (diff)
- 10:19 ReleaseNotes/1.9.1 edited by
- (diff)
- 10:17 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- See 80dcee4/OMCompiler that implements comment:6. Let's …
- 09:21 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- The error is in the build before: …
- 09:11 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- I don't find the error message given in comment:5 in the linked …
- 08:48 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- It looks like the "simple" solution does not work. We should then do …
- 07:57 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Hi, with your changes the windos build is broken. I got this error …
- 06:26 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- Replying to sjoelund.se: > I guess they are. I will add …
- 06:10 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- I guess they are. I will add better testing of the function in …
- 00:46 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- Maybe the fixes by Per a5957d/OMCompiler are needed also …
- 00:37 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- You are right! 1.9.5 does NOT work for …
- 00:27 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
-
Replying to rfranke:
>
make gitcleandoes not work on … - 00:25 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
-
make gitcleandoes not work on the om-level. I tried `make clean; …
2016-03-15:
- 23:49 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
-
Everything seems to work with the regular
OMCFactory, see … - 23:32 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- @rfranke try to do a make gitclean before building again.
- 22:23 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- I just tried under Jessie (gcc 4.9.2), starting from the current …
- 22:09 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- Replying to sjoelund.se: > I think I would have preferred …
- 22:01 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
- Regarding the "small fix" 05ca4d21/OMCompiler: does anyone …
- 21:35 Ticket #3760 (Cpp Run-time - Cross compilation of binary FMUs) updated by
-
Cc changed
fea7a0a/OMCompiler (and the subsequent fix) separate … - 21:21 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- Something seems to be fishy with the fix or I'm doing something wrong …
- 19:43 Ticket #3769 (Installation program - Problem with GCC compiler on Windows 10 - OpenModelica 1.9.4 final rel) updated by
-
Owner, Component changed
- 19:43 Ticket #3769 (Installation program - Problem with GCC compiler on Windows 10 - OpenModelica 1.9.4 final rel) updated by
- Are you connected to any sort of AD domain? (That could enforce some …
- 18:08 Ticket #3769 (Installation program - Problem with GCC compiler on Windows 10 - OpenModelica 1.9.4 final rel) created by
- I have just installed the OpenModelica 1.9.4 final release on MS …
- 17:13 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- Having not used them much in the past, I was assuming that inlined …
- 16:28 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- @crupp: can you be a bit more specific what you mean with "Looks like …
- 16:04 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- I think I would have preferred to make it a static inline function, or …
- 15:40 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- Also, vitalij was smart and caught the error in my fix, it should be: …
- 15:30 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
-
Cc changed
Added rfranke and niklwors to CC for the CPP runtime. - 15:27 Ticket #3765 (Run-time - Bad macro for semiLinear) reopened by
- Looks like I was sloppy. The cpp version also needs it in: …
- 15:21 Ticket #3766 (OMEdit - OMEdit crashes, when you move marked models) closed by
- fixed: Fixed in 6ca8c1c/OMEdit.
- 14:17 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") updated by
-
Status, Owner, Component changed
This might have something to do with parallel loading of Modelica … - 14:00 Ticket #3768 (OMEdit - Add keyboard shortcuts for flipping of icons horizontally and vertically) updated by
- Oh yes sorry. I blame the students that did not run the latest version.
- 13:52 Ticket #3768 (OMEdit - Add keyboard shortcuts for flipping of icons horizontally and vertically) closed by
- invalid: We have that already. See 62c0c86/OMEdit.
- 13:49 Ticket #2220 (OMEdit - Automatic Save in OMEdit - Logging of Edit Operations) closed by
- fixed: Fixed in 1ec6313/OMEdit. The automatic save is available …
- 13:48 Ticket #3768 (OMEdit - Add keyboard shortcuts for flipping of icons horizontally and vertically) created by
-
My proposal:
* flipping horizontally:
h* flipping vertically:v - 13:48 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") updated by
- When I use loadModel(Modelica) in Shell it says "true" (tried it …
- 13:44 Ticket #2347 (OMEdit - OMEdit error message on autosave in text view) closed by
- fixed: Fixed in 1ec6313/OMEdit.
- 13:44 Ticket #2416 (OMEdit - Unwanted behaviour of OMEdit with syntactically incorrect models) closed by
- fixed: Fixed in 1ec6313/OMEdit. The auto save functionality is …
- 13:18 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") updated by
- There is a bug in Trac with German browsers, just go to …
- 13:08 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") updated by
-
What happens if you use call
loadModel(Modelica)fromOMShell? - 13:03 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") updated by
- omediterror.txt and omeditoutput.txt are both empty. (Sorry, can´t …
- 12:56 Ticket #3766 (OMEdit - OMEdit crashes, when you move marked models) updated by
- I mark them by drawing a square with the mousepointer over all models. …
- 12:54 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- Yes, the order does not matter. And I checked the threading module as …
- 12:41 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") updated by
- Start the program and when it is freezed kill it manually from task …
- 12:36 Ticket #3767 (Parser - OMEdit - Freeze Loading Screen at "Creating Widgets") created by
- Sometimes when I open OMEdit it hangs up at the event "Creating …
- 12:35 Ticket #3766 (OMEdit - OMEdit crashes, when you move marked models) updated by
- Could you provide a sample model? How are you marking the components? …
- 12:30 Ticket #3766 (OMEdit - OMEdit crashes, when you move marked models) created by
- When I mark several models on the diagram layer at the same time and …
- 11:50 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- > import mpl _after_ OMPython? sorry, the other way round of course. :-P
- 11:42 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- Does this also occur if you import mpl _after_ OMPython? If not, it …
- 11:36 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- It's weird in the sense that this only occurs if matplotlib and …
- 10:56 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- Also, https://github.com/OpenModelica/OMPython/issues/3 is unrelated. …
- 09:00 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- I guess this is to be expected. The simulation result is huge and is …
- 08:37 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
-
Status, Owner changed
- 07:59 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) updated by
- possibly related: https://github.com/OpenModelica/OMPython/issues/3 ?
- 00:53 Ticket #3027 (OMEdit - Select and export variables after simulation) closed by
- fixed: Done in 19e8270/OMEdit.
- 00:22 Ticket #3765 (Run-time - Bad macro for semiLinear) closed by
- fixed
- 00:22 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- your fixes was added with …
2016-03-14:
- 23:14 Ticket #3765 (Run-time - Bad macro for semiLinear) updated by
- Thank you for the analysis!
- 22:41 Ticket #3765 (Run-time - Bad macro for semiLinear) created by
- In openmodelica.h the macro for semiLinear is defined as: #define …
- 21:18 Ticket #3032 (OMEdit - Two connecting lines issues) closed by
- fixed: Fixed in 2805502/OMEdit.
- 15:30 Ticket #3764 (OMPython - OMCSession.sendExpression uses up all available memory when pyplot is ...) created by
- I wanted to create a testing script for my modelica models using …
- 15:22 ReleaseNotes/1.9.4 edited by
- (diff)
- 15:22 ReleaseNotes/1.10.0 created by
- 14:59 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
-
Milestone changed
- 14:58 Tickets #1283,2059,2079,2081,2132,2152,2250,2282,2395,2484,2538,2612,2660,2661,2858,2891,2926,2960,3102,3274,3318,3424,3567,3636,3674,3679,3739,3742,3743,3763,1298,1486,1748,1814,1853,2173,2190,2254,2296,2379,2384,2407,2416,2548,2565,2578,2634,2648,2685,2734,2845,2870,2905,2946,3088,3089,3101,3143,3186,3192,3399,3440,3565,3582,3614,3645,3646,3681,3685,1232,1348,1428,1458,1556,1646,1651,1791,1806,1815,1816,1817,1822,1831,1842,1879,1883,1884,1886,1887,1888,1889,1890,1893,1899,1910,1914,1919,1924,1929,1930,1931,1934,1936,1937,1940,1942,1958,1963,1976,1991,2010,2013,2015,2023,2029,2037,2038,2044,2045,2051,2052,2058,2061,2078,2080,2084,2091,2094,2100,2105,2107,2120,2122,2153,2164,2174,2182,2185,2186,2187,2193,2199,2206,2208,2213,2214,2226,2232,2246,2247,2249,2266,2275,2284,2287,2292,2301,2304,2306,2309,2316,2319,2325,2327,2331,2335,2340,2342,2343,2347,2357,2361,2365,2367,2370,2372,2378,2381,2387,2394,2420,2421,2426,2428,2447,2463,2466,2467,2469,2471,2473,2474,2479,2485,2486,2488,2492,2494,2499,2500,2501,2502,2511,2520,2533,2541,2546,2549,2558,2573,2576,2577,2579,2582,2584,2591,2599,2605,2608,2613,2618,2619,2620,2621,2626,2628,2647,2653,2664,2670,2671,2672,2684,2686,2689,2694,2698,2703,2717,2725,2728,2730,2735,2738,2740,2742,2745,2750,2751,2755,2756,2764,2765,2773,2774,2807,2821,2842,2847,2869,2880,2881,2897,2909,2910,2931,2954,2967,3035,3067,3077,3111,3116,3118,3139,3152,3153,3154,3160,3183,3195,3227,3241,3253,3257,3266,3287,3288,3294,3301,3321,3328,3363,3365,3368,3383,3402,3414,3415,3454,3456,3459,3464,3485,3487,3488,3491,3495,3498,3503,3524,3526,3540,3546,3553,3559,3570,3572,3575,3592,3600,3612,3613,3637,3638,3640,3649,3680,3703,3706,3722,3726,3727,3729,3731,3740,3745,3750,3758,3759,3760,1080,1228,1366,1792,1813,1839,1869,1935,1938,1990,2000,2004,2055,2205,2233,2242,2276,2312,2318,2323,2354,2380,2433,2435,2443,2446,2472,2498,2547,2572,2609,2624,2638,2651,2696,2700,2709,2712,2736,2763,2777,3032,3074,3138,3252,3534,3608,3762,1429,1857,1966,2007,2274,2307,2417,2438 batch updated by
-
Milestone changed
Milestone renamed - 13:07 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- It builds fine for me after building both of them. If you are …
- 12:53 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- Done in 4c4b39f/OpenModelica-testsuite. We might improve …
- 10:25 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- I will add a test.
- 10:17 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- [changeset:6d761ce5e911ca8ed7e70ce4cb6835a8d54dfde2/OMCompiler …
2016-03-13:
- 17:16 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- Those tests are horrible, by the way. Better to just query the XML for …
- 17:11 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
- We already have some tests which check for the generated xml e.g., …
- 16:55 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) updated by
-
Status, Owner changed
I'm assigning this to Martin. We should add a test where we output the … - 16:53 Ticket #3763 (Backend - FMI 2.0 export broken in OpenModelica 1.9.4) created by
- The generation of the model structure does not work anymore for …
- 00:00 Ticket #2274 (OMEdit - update class name in "Libraries Browser”) closed by
- fixed: Done in 6247798/OMEdit.
- 00:00 Ticket #2845 (OMEdit - OMEdit handling of packages in the GUI is inconsistent) closed by
- fixed: Done in 6247798/OMEdit.
Note:
See TracTimeline
for information about the timeline view.
