Timeline
2017-11-22:
- 15:45 Ticket #3993 (Backend - Back-end fails with MSL 3.2.2 TimeTable but works with MSL 3.2.1) updated by
-
Cc, Owner, Component, Summary changed
Changed the subject to reflect the root cause of the problem more precisely - 15:08 Ticket #3993 (Backend - Back-end fails with MSL 3.2.2 TimeTable but works with MSL 3.2.1) updated by
- I tried to change the TimeTable to a ramp, and now the code does run …
- 14:43 Ticket #3993 (Backend - Back-end fails with MSL 3.2.2 TimeTable but works with MSL 3.2.1) updated by
- I tried out a simple example involving index reduction (attached …
- 14:23 Ticket #3993 (Backend - Back-end fails with MSL 3.2.2 TimeTable but works with MSL 3.2.1) updated by
- @dersh, I tried your model with the current nightly. The error I get …
- 13:04 Ticket #2763 (Run-time - Propagation of start values for inputs to simulation) updated by
- Functional Mock-up Interface 2.0 July 25, 2014 Page 47 of 126 Near the …
2017-11-21:
- 18:42 Ticket #4642 (Documentation - Add documentation of __OpenModelica vendor annotations for compilation ...) updated by
-
Description changed
- 18:34 Ticket #4642 (Documentation - Add documentation of __OpenModelica vendor annotations for compilation ...) created by
- Following the discussion in #3488, vendor-specific annotations were …
- 13:45 Ticket #4638 (Third-Party Libraries - Power systems library; voltage source does not respect parameter frequency) closed by
- invalid: I agree, and the ticket …
- 10:48 Ticket #4640 (OMEdit - Categorize OMEdit messages) updated by
- Yeah we use to have this functionality in older versions. In order to …
- 09:36 Ticket #4641 (FMI - FMU exported from OpenModelica 1.13.0 does not integrate correctly ...) updated by
- OpenModelica isn't treating that expression as a time event. I am also …
- 08:50 Ticket #4641 (FMI - FMU exported from OpenModelica 1.13.0 does not integrate correctly ...) updated by
- The modelica model causing the problem, see definition of variable x1. …
- 08:38 Ticket #4639 (FMI - FMI modelDescription contains no units) updated by
- PR2039 (https://github.com/OpenModelica/OMCompiler/pull/2039/) …
- 08:36 Ticket #4641 (FMI - FMU exported from OpenModelica 1.13.0 does not integrate correctly ...) created by
- A model has a time event defined at t=1, resulting in a step change of …
- 08:26 Ticket #4640 (OMEdit - Categorize OMEdit messages) created by
- OMEdit messages appearing below the model diagram should be …
- 07:24 Ticket #4639 (FMI - FMI modelDescription contains no units) created by
- CodegenFMUCommon.tpl contains the comment: […] This appears not …
- 07:20 Ticket #4638 (Third-Party Libraries - Power systems library; voltage source does not respect parameter frequency) updated by
- As this is a bug in an external library, it might lead to a quicker …
- 02:24 Ticket #4638 (Third-Party Libraries - Power systems library; voltage source does not respect parameter frequency) created by
- I tried to use 2 voltage sources of same amplitude but set at …
2017-11-20:
- 13:30 Ticket #4138 (New Instantiation - New FrontEnd) updated by
-
Description changed
- 12:02 Ticket #4637 (Backend - Sort of the input and output variables in the model description) created by
- Currently the Real input and output variables are not sorted together, …
- 11:17 Ticket #4636 (New Instantiation - Incorrect report of Arraytype mismatch) updated by
- Thanks! the minimal model looks fine. If there is a complementary …
- 10:40 Ticket #4636 (New Instantiation - Incorrect report of Arraytype mismatch) updated by
-
Status, Owner, Version, Component, Milestone changed
I made a minimal model that shows the issue. The issue seems to be a …
2017-11-19:
- 18:44 Ticket #4371 (OMPlot - Import unit information) updated by
- Does OMPlot/OMEdit already import the unit information from the mat files?
- 14:16 Ticket #4636 (New Instantiation - Incorrect report of Arraytype mismatch) updated by
- Invesitigating further on the issue the cause is likely not the array …
2017-11-18:
- 23:01 Ticket #4636 (New Instantiation - Incorrect report of Arraytype mismatch) created by
- Hello! I encountered some buggy behaviour when checking a model in …
- 22:34 Ticket #4635 (Frontend - Record fields types are not preserved for nested structures ...) created by
- In the folowing example: […] Models NormalA and NormalB compile …
- 06:32 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
- another issue: once a x-y plot has been displayed, the time unit of …
- 06:28 Ticket #4371 (OMPlot - Import unit information) updated by
- Now unit information is available in matlab files. Maybe this can be …
- 05:54 Ticket #4634 (Backend - Modelica.Electrical.Machines.Sensors.ElectricalPowerSensor not working ...) created by
- The attached model uses the …
2017-11-17:
- 14:45 Ticket #4628 (OMEdit - Visualization of OpenModelica 1.12 not working on Citrix) updated by
- OK, thanks for your hints. I will check with our IT guys on the OpenGL …
- 12:28 Ticket #2816 (MetaModelica - Support threaded reductions language extension) updated by
- Can this be implemented for for-loops as well? […] Would be …
- 10:19 Ticket #4633 (MetaModelica - [MetaModelica] skip cases for partial matches) updated by
- I guess a partial match on the first argument only would even be …
- 10:03 Ticket #4633 (MetaModelica - [MetaModelica] skip cases for partial matches) created by
- There are many match expressions with multiple arguments in …
- 08:48 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
- Replying to anonymous: > Replying to hkiel: > …
- 07:43 Ticket #4632 (Interactive Environment - Moving a model creates wrong code) updated by
- I've had a closer look at the issue. In this case when moving the …
2017-11-16:
- 21:38 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
- Replying to hkiel: > ExpressionSimplify has the …
- 15:15 Ticket #4624 (OMEdit - Huge error message when moving an object) updated by
- See also #4632
- 15:15 Ticket #4632 (Interactive Environment - Moving a model creates wrong code) updated by
-
Cc changed
- 13:43 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) updated by
-
Version changed
- 12:57 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
- ExpressionSimplify has the simplification {{{exp(... * log(x) * ...) …
- 12:35 Ticket #4628 (OMEdit - Visualization of OpenModelica 1.12 not working on Citrix) updated by
- Citrix might have issues with OpenGL or other type of GPU based …
- 12:23 Ticket #3252 (Backend - Abnormal memory consumption during compilation of models with inlined ...) updated by
-
Priority, Milestone changed
OK, I guess this is a fairly extreme corner case, it's probably not … - 11:55 Ticket #4628 (OMEdit - Visualization of OpenModelica 1.12 not working on Citrix) updated by
- I tried Windows Media Player and YouTube and both work well on Citrix.
- 11:19 Ticket #3252 (Backend - Abnormal memory consumption during compilation of models with inlined ...) updated by
-
comSubExpis not capable of substituting these terms. … - 10:50 Ticket #3252 (Backend - Abnormal memory consumption during compilation of models with inlined ...) updated by
- Could we add an (optional?) post-optimization call to it?
- 10:49 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
- Replying to hkiel: > incorrect simplifications - …
- 10:44 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
-
Cc changed
I support the idea. In fact, I think this topic is much broader than … - 10:37 Ticket #4221 (OMOptim - OmOptim crashes after model selection) updated by
- If I understand correctly, OMOptim "just" called the compiled OM code …
- 10:26 Ticket #3252 (Backend - Abnormal memory consumption during compilation of models with inlined ...) updated by
-
comSubExpis a pre-optimization module and won't handle this. - 10:13 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
-
Cc, Description changed
- 09:31 Ticket #4221 (OMOptim - OmOptim crashes after model selection) updated by
- Replying to sjoelund.se: > And yes, I think there was …
- 09:06 Ticket #4632 (Interactive Environment - Moving a model creates wrong code) created by
- This ticket is related to, but different from #4624 1) load TestP 2) …
- 08:58 Ticket #4485 (OMEdit - Add units for volume flow to OMEdit) updated by
- As I understand, the list of potential units that you get in the unit …
- 08:55 Ticket #4531 (Frontend - Enable unit checking by default) closed by
- duplicate: Replying to Christoph Buchner <buchner@…>: > This has …
- 08:45 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) updated by
-
Milestone changed
The "Version" field refers to the version of the sofware you … - 08:35 Ticket #4631 (FMI - FMU clash with IPython and PyFMI (JSON involved)) created by
- Trying to load an FMU compiled by omc (OpenModelica's compiler) with …
- 08:27 Ticket #4630 (*unknown* - Rethink mathematical simplifications) updated by
-
Description changed
- 08:25 Ticket #4630 (*unknown* - Rethink mathematical simplifications) created by
- I propose to have in this ticket a list of (more complex) mathematical …
- 08:07 Ticket #4221 (OMOptim - OmOptim crashes after model selection) updated by
- And yes, I think there was basically no real maintenance of the code …
- 08:06 Ticket #4221 (OMOptim - OmOptim crashes after model selection) updated by
- We didn't even ship OMOptim as part of the 1.9.4 OM release on Linux …
- 07:57 Ticket #4221 (OMOptim - OmOptim crashes after model selection) updated by
- Is there an obvious/quick fix for this? Otherwise, how far back does …
- 07:56 Ticket #3851 (Backend - optimized zero crossings for cpp runtime) updated by
-
Milestone changed
Since this seems connected … - 07:50 Ticket #2750 (Code Generation - Units of derivatives in the variables browser) updated by
- I just checked with a recent 1.13 dev version, and the situation from …
- 07:32 Ticket #4485 (OMEdit - Add units for volume flow to OMEdit) updated by
- How would you handle this? Where would you add this? Doesn't the user …
- 07:27 Ticket #4531 (Frontend - Enable unit checking by default) updated by
- This has effectively become a duplicate of #4629, which has more …
- 07:04 Ticket #2694 (Backend - Simulate thermopower pump error code -1) updated by
-
Milestone changed
2017-11-15:
- 19:50 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) updated by
-
Summary changed
- 19:49 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) updated by
- Ok I've changed to English. But still don't know how to correctly …
- 15:36 Ticket #3252 (Backend - Abnormal memory consumption during compilation of models with inlined ...) updated by
-
Summary changed
Of course it's not inline integration, but rather function inlining, I … - 15:31 Ticket #3252 (Backend - Abnormal memory consumption during compilation of models with inlined ...) updated by
- I think this is not about inline integration as the title says? I do …
- 14:54 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) updated by
- You just go to Preferences: …
- 14:45 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) updated by
- Pls check (and in case correct) the milestone. I don't see it in …
- 14:43 Ticket #3608 (Frontend - Omedit shows a component's icon but when checking does not find it) closed by
- worksforme: With OM 1.13.0-dev 215 the issue is not there anymore. I'm going to …
- 13:47 Ticket #4628 (OMEdit - Visualization of OpenModelica 1.12 not working on Citrix) updated by
- I would assume this is a problem with Citrix not handling 3D …
- 13:31 Ticket #4626 (OMEdit - Unit checking in the new front end is slow) updated by
- Replying to sjoelund.se: > Well, we could just make the …
- 13:30 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) created by
- Until unit checking becomes a lot faster than it is now (see #4626), …
- 13:23 Ticket #2309 (Code Generation - Cannot read numbers from a file) updated by
- Replying to sjoelund.se: > @casella: Never close a ticket …
- 13:19 Ticket #4628 (OMEdit - Visualization of OpenModelica 1.12 not working on Citrix) created by
- In our school we are using Citrix to work on virtual desktops. The …
- 12:43 Ticket #4625 (Interactive Environment - OMEdit: Sometimes issues a wrong error message when renaming) closed by
- fixed
- 12:43 Ticket #4625 (Interactive Environment - OMEdit: Sometimes issues a wrong error message when renaming) updated by
- I also checked that is fixed.
- 11:16 Ticket #2469 (New Instantiation - Unrolling array expressions) updated by
- https://github.com/OpenModelica/OMCompiler/pull/2018 makes this work …
- 10:46 Ticket #2469 (New Instantiation - Unrolling array expressions) updated by
-
This model works fine in the old frontend with
-v=1; it seems when … - 08:21 Ticket #4624 (OMEdit - Huge error message when moving an object) updated by
- It is serious in the sense that the formatting will get all messed up. …
- 08:10 Ticket #2372 (Frontend - A scoping issue?) updated by
- I also checked and the issue is not there anymore.
- 08:08 Ticket #4624 (OMEdit - Huge error message when moving an object) updated by
- This is a strange ticket. In a sense it is not serious since it …
- 08:00 Ticket #4626 (OMEdit - Unit checking in the new front end is slow) updated by
- Sounds good to me! It makes more users aware of unit issues (which I …
- 08:00 Ticket #2694 (Backend - Simulate thermopower pump error code -1) closed by
- invalid: I think without repro code, and with no feedback from the reporter, …
- 07:52 Ticket #2541 (New Instantiation - Unable to connect components for fluids) closed by
- worksforme: With the code in the OP, if I set the missing medium redeclare in …
- 07:20 Ticket #4624 (OMEdit - Huge error message when moving an object) updated by
-
Priority, Milestone changed
This needs to be fixed before 1.13.0 but I don't have time to look … - 06:46 Ticket #2407 (Frontend - Invalid component reference for model hierarchy with identical names ...) closed by
- worksforme: Ignore @casella's comment. OMC opens total files just fine. Only …
- 06:45 Ticket #2407 (Frontend - Invalid component reference for model hierarchy with identical names ...) reopened by
- 06:40 Ticket #2309 (Code Generation - Cannot read numbers from a file) closed by
- worksforme
- 06:40 Ticket #2309 (Code Generation - Cannot read numbers from a file) reopened by
- @casella: Never close a ticket with milestone set to future. Set it to …
Note:
See TracTimeline
for information about the timeline view.
