Timeline
2013-02-27:
- 23:38 Ticket #1655 (OMEdit - Omedit display of PID MSL component) closed by
- fixed: Fixed in r15376.
- 22:54 Ticket #2092 (Frontend - Got type mismatch error, but matching types Integer) updated by
-
Owner, Component, Description changed
- 22:52 Ticket #2092 (Frontend - Got type mismatch error, but matching types Integer) updated by
- Whoops! An old version of the model. It should be […]
- 22:49 Ticket #2092 (Frontend - Got type mismatch error, but matching types Integer) created by
- […]
- 18:02 Ticket #2091 (Frontend - reinit(der(x), ...) should give better error message) updated by
-
Cc changed
- 17:45 Ticket #2090 (MetaModelica - Stack overflow detection) updated by
- The omc main function now detects overflows. For later we need some …
- 13:55 Ticket #2089 (Frontend - OMEdit loses connection to OMC if opening Modelica.Media.Examples) updated by
- Attached a more detailed backtrace (produced by the bootstrapped omc)
- 13:37 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Oh, it's a variable filter. No-where does it say it filters …
- 13:35 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Last minute note from a user! :) I'd like to see this behavior …
- 13:30 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Well, then this ticket is done. :-)
- 13:27 Ticket #2091 (Frontend - reinit(der(x), ...) should give better error message) updated by
- Replying to petar: > A more helpful message would be …
- 13:25 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- That's not really a valid concern though. If the functionality is …
- 13:18 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Yes, for sure. But maybe someone wants to use that filter-feature to …
- 13:13 Ticket #2091 (Frontend - reinit(der(x), ...) should give better error message) created by
- Validating this model: […] gives this error message: […] A …
- 13:01 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- There's no point in filtering parameters. They take up so little space …
- 12:31 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Currently we do not filter parameters at all. Should we filter them also?
- 12:07 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) closed by
- fixed: fixed in r15355
- 10:02 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Replying to lochel: > Replying to lempinen: …
- 09:42 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
-
Status changed
- 09:41 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- Replying to lempinen: > The easy way would be to filter …
- 06:31 Ticket #2090 (MetaModelica - Stack overflow detection) updated by
-
Status, Owner changed
- 06:31 Ticket #2090 (MetaModelica - Stack overflow detection) created by
- Because OMEdit requires omc to never crash, we need a way to recover …
2013-02-26:
- 15:29 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
- testsuite/simulation/modelica/others/filterTest.mos (r15337)
- 12:47 Ticket #2089 (Frontend - OMEdit loses connection to OMC if opening Modelica.Media.Examples) updated by
-
Cc, Owner, Component changed
The problem is with Modelica.Media.Examples.SimpleLiquidWater model. … - 12:18 Ticket #2089 (Frontend - OMEdit loses connection to OMC if opening Modelica.Media.Examples) created by
- System: OpenModelica 1.9.0 beta4 + dev r15322 Windows 7 64bit If I …
- 10:56 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
-
Description changed
- 10:28 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) updated by
-
Status, Owner, Component changed
- 10:26 Ticket #2087 (FMI - Move generated functions) updated by
-
Cc changed
- 09:39 Ticket #2088 (Run-time - Mat results get corrupted with variable filters) created by
- Mat file is corrupted with "A = B" equations, if B is filtered out. …
- 08:19 Ticket #2087 (FMI - Move generated functions) updated by
-
Description changed
- 08:18 Ticket #2087 (FMI - Move generated functions) created by
- At the moment, we generate code like: […] And call it from the …
2013-02-25:
- 14:28 Ticket #1858 (OMEdit - Better template classes) updated by
- OMEdit can ask the compiler for the file information of classes, so …
- 14:25 Ticket #1858 (OMEdit - Better template classes) updated by
- > If you create a new model and you need to show its text then you …
- 14:21 Ticket #1858 (OMEdit - Better template classes) updated by
- Replying to sjoelund.se: > Replying to [comment:3 …
- 14:03 Ticket #1858 (OMEdit - Better template classes) updated by
- Replying to adeas31: > The problem is the list API No, …
- 14:01 Ticket #1858 (OMEdit - Better template classes) updated by
- We can add the equation/algorithm within the string that OMEdit routes …
- 09:12 Ticket #2085 (OMEdit - OMEdit 1.9.0 crashes frequently) closed by
- duplicate: Duplicate of #2086.
- 08:35 Ticket #2086 (OMEdit - OMEdit 1.9.0 crashes frequently) created by
- When I go to the Icon layer and want to access the text properties by …
- 08:33 Ticket #2085 (OMEdit - OMEdit 1.9.0 crashes frequently) created by
- When I go to the Icon layer and want to access the text properties by …
- 07:09 Ticket #2084 (New Instantiation - Add Modelica 3.3 impure/pure in the front-end Absyn, SCode, DAE) updated by
- - support added in r15300 - more checks are needed.
- 04:44 Ticket #2084 (New Instantiation - Add Modelica 3.3 impure/pure in the front-end Absyn, SCode, DAE) created by
- See Modelica 3.3 pure/impure
2013-02-22:
- 16:27 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- OK, great! Thanks.
- 16:00 Ticket #2081 (OMEdit - Conditional connectors not handled by OMEdit) updated by
-
Summary changed
- 15:57 Ticket #2083 (OMEdit - Graphical annotations enable, tab, and group not supported by OMEdit) created by
- The annotations enable, tab, and group are widely used in the MSL to …
- 15:13 Ticket #2075 (FMI - FMU for co-simulation import warnings) updated by
- Ok, I solved the latter problems: I now get my plots. The …
- 15:10 Ticket #2080 (Backend - Mechanics.MultiBody.Examples.Constraints.PrismaticJoint) updated by
- If possible, it would be nice to have a second linear solver to try in …
- 14:57 Ticket #2080 (Backend - Mechanics.MultiBody.Examples.Constraints.PrismaticJoint) updated by
-
Cc, Status, Owner changed
It's really strange, since it works on my Ubuntu 12.04 with: gcc-4.4 … - 14:52 Ticket #2082 (OMEdit - Annotation relative to models not in their proper place) created by
- I have created some simple models with OMEdit, and the annotation with …
- 13:54 Ticket #2081 (OMEdit - Conditional connectors not handled by OMEdit) updated by
-
Status, Owner, Component, Milestone changed
- 13:52 Ticket #2081 (OMEdit - Conditional connectors not handled by OMEdit) created by
- Since cardinality was deprecated a few years ago, conditional …
- 13:43 Ticket #1497 (Installation program - OM Installer: Installer fails if drive "c:" does not exist / is not ...) closed by
- fixed: Fixed in r15278.
- 12:40 Ticket #2080 (Backend - Mechanics.MultiBody.Examples.Constraints.PrismaticJoint) updated by
- Looking through the equation-system that failed, it is a constant …
- 12:39 Ticket #2076 (Backend - simulation command-line arguments have changed) closed by
- fixed: No, the flags were changes to what I wrote in the beginning (3 types). …
- 12:14 Ticket #2080 (Backend - Mechanics.MultiBody.Examples.Constraints.PrismaticJoint) created by
- Modelica.Mechanics.MultiBody.Examples.Constraints.ConstrainPrismaticJoi …
- 09:41 Ticket #2078 (Frontend - Inner/outer not working in algorithm section) updated by
- I guess this is a problem somewhere in the prefixing and maybe …
- 09:24 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- As far as I know all the flags were changed to -flag=something, …
- 09:05 Ticket #2070 (Run-time - Make simulation helptext available from OMNotebook) updated by
-
Cc, Status, Owner changed
This should be fixed with r15269... And the commit someone else makes … - 08:36 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
-
Status, Owner changed
I already had the same idea to make everyone happy. I will implement it. - 08:36 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) created by
- Many models in the MSL and in other Modelica libraries heavily rely on …
- 08:12 Ticket #1714 (OMEdit - OMEdit does not show inherited parameter choises?) updated by
-
Priority changed
This issue has been around for a very long time, since the old days of … - 08:06 Ticket #2078 (Frontend - Inner/outer not working in algorithm section) created by
- Inner/outer not working in algorithm section (if we change the …
- 06:08 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- Lennart, why don't we simply allow both types of input? It's not that …
- 06:00 Ticket #2077 (Run-time - override flag broken) closed by
- fixed: Fixed in r15268.
- 05:47 Ticket #2077 (Run-time - override flag broken) updated by
-
Status, Owner, Summary changed
CSV output isn't broken. It works just fine. However, when using … - 05:37 Ticket #2077 (Run-time - override flag broken) updated by
-
Owner, Component changed
- 00:21 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- But please fix 2077 first!
- 00:19 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- That's exactly what I mean. Right now you've got a mix of "-f VALUE", …
2013-02-21:
- 23:04 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- You mean something like "–override=var1=start1,startTime=val1" That …
- 21:09 Ticket #2077 (Run-time - override flag broken) updated by
- […]
- 21:06 Ticket #2077 (Run-time - override flag broken) created by
- OK, I can now compile camelbrake.mo, but when I try to run it with CSV …
- 21:04 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- So, why isn't "-override" now "-override=VALUES"? I don't think this …
- 19:17 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
-
Cc changed
- 19:17 Ticket #2076 (Backend - simulation command-line arguments have changed) updated by
- The command line flags for the simulation has been changed to provide …
- 17:10 Ticket #2076 (Backend - simulation command-line arguments have changed) created by
- Until recently (1.9.0b3) the generated C simulation programs could be …
- 13:52 Ticket #2075 (FMI - FMU for co-simulation import warnings) created by
- When I try importing my own FMU (for co-simulation), I get the …
- 13:33 Ticket #1909 (New Instantiation - Propagate redeclares correctly) updated by
- No. Your model is correct. The old instantiation cannot handle …
- 13:18 Ticket #2073 (Code Generation - reading of info XML invalid) closed by
- fixed: Fixed in r15257.
- 13:17 ReleaseNotes/1.9.0 edited by
- (diff)
- 13:07 Ticket #2073 (Code Generation - reading of info XML invalid) updated by
- ... OK, I feel stupid. It should be just one equation. I was pretty …
- 13:05 Ticket #2073 (Code Generation - reading of info XML invalid) updated by
-
Cc changed
The question is should every statement line get it's own unique index, … - 11:36 Ticket #2074 (Code Generation - Massive jump in timeTemplates) updated by
-
Status, Owner changed
If you add a flag to disable dumpElementSource for the C-target, you … - 11:08 Ticket #2074 (Code Generation - Massive jump in timeTemplates) created by
- Hi, since the commit […] timeTemplates is now 10 times bigger! …
- 06:52 Ticket #1909 (New Instantiation - Propagate redeclares correctly) updated by
- Replying to adrpo: > Have you tried with flag …
2013-02-20:
- 20:04 ReleaseNotes/1.9.0 edited by
- (diff)
- 20:03 ReleaseNotes/1.9.0 edited by
- (diff)
- 18:21 Ticket #2073 (Code Generation - reading of info XML invalid) updated by
-
Cc, Description changed
ok, SimCodeUtil is driving me crazy […] gives: […] so it creates … - 17:46 Ticket #2073 (Code Generation - reading of info XML invalid) updated by
- Ok, two equations with index 9. Should be easy enough to fix once I …
- 17:44 Ticket #2073 (Code Generation - reading of info XML invalid) created by
- Attached is a model file which when simulated gives the error …
- 16:22 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) closed by
- fixed: Fixed (patched MSL) in r15249. I also started checking for unassigned …
- 11:46 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
- A little over 100 tests changed output. Most are 3rd-party libraries …
- 11:12 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
-
Component changed
- 11:12 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
-
Status, Owner changed
I'm working on updating the existing code to take records into … - 09:33 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
- Created bug report #994
- 09:24 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
- Output format parameters are local variables within the function body …
- 09:19 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
- Okay, could you point me to that clear sentence in the spec? I've …
- 05:30 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) updated by
- No, the MSL isn't full of it. But it has a few such cases. And we do …
- 02:31 Ticket #2072 (Frontend - intialization of output formal parameters in modelica functions) created by
- I guess we should set an implicit default value for formal output …
Note:
See TracTimeline
for information about the timeline view.
