Timeline
2018-02-12:
- 21:33 Ticket #4755 (*unknown* - Reduce memory usage when building models in OpenModelica) updated by
-
Cc changed
OK, so the next question is: do we really need 3.2 GB to process … - 19:05 Ticket #4755 (*unknown* - Reduce memory usage when building models in OpenModelica) updated by
- I limited models to 4GB due to OS crashes on ripper.openmodelica.org
- 16:05 Ticket #4755 (*unknown* - Reduce memory usage when building models in OpenModelica) created by
- Please check the results of …
- 15:50 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- Unfortunately we still have 31 models out of 48 that fail in MSL 3.2.2 …
- 15:37 Ticket #4741 (New Instantiation - analyzeInitialSystem scales as O(N^3) when NF is used) updated by
- Wow. Good that I spotted this as a performance issue :)
- 12:09 Ticket #4741 (New Instantiation - analyzeInitialSystem scales as O(N^3) when NF is used) closed by
- fixed: Fixed in 58a87d01. The issue was that …
2018-02-09:
- 20:33 Ticket #3625 (Frontend - Extremly long compilation time) updated by
- I also tested the two examples again under Linux. The compile time …
- 13:49 Ticket #2926 (Frontend - Check uses-annotation on loadFile) updated by
-
Status, Owner changed
- 13:48 Ticket #2926 (Frontend - Check uses-annotation on loadFile) updated by
-
Milestone changed
- 13:37 Ticket #3705 (OMPython - Implement jupyter-openmodelica in addition to OMNotebook) closed by
- fixed
- 13:22 Ticket #3625 (Frontend - Extremly long compilation time) updated by
- Both of the examples run in 0.4s for me under Linux. I will add …
- 13:15 Ticket #2926 (Frontend - Check uses-annotation on loadFile) updated by
- Unfortunately the automatic loading does not work when the libraries …
- 13:14 Ticket #3418 (Backend - Bad performance of Spice3BenchmarkFourBitBinaryAdder dominating MSL ...) updated by
- Not really for the library coverage. We run the C runtime version for …
- 13:04 Ticket #3418 (Backend - Bad performance of Spice3BenchmarkFourBitBinaryAdder dominating MSL ...) updated by
- Is it possible to disable this test, until we fixed the problem for …
- 12:57 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- The configuration hash changes when I change something. In this case, …
- 12:55 Ticket #3418 (Backend - Bad performance of Spice3BenchmarkFourBitBinaryAdder dominating MSL ...) updated by
- The performance of the C++ code generation got even worse: […] For …
- 12:55 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- It will be interesting to see what happens with @sjoelund.se's commit. …
- 12:45 Ticket #3463 (Interactive Environment - Native Mac distribution often generates stack overflow.) closed by
- worksforme
- 12:14 Ticket #2558 (Backend - $PRE variables in info XML are marked discrete) closed by
- invalid: Closing this due to lack of input.
- 11:59 Ticket #2738 (Frontend - Stack overflow in frontend) closed by
- fixed: I'll mark this as fixed because the original bug was fixed
- 10:25 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- Should be fixed in https://github.com/OpenModelica/OMCompiler/pull/2180
- 10:20 Ticket #3259 (Interactive Environment - list API should return within statement) closed by
- invalid: I don't think so.
- 10:12 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
-
It seems the type in the relation is different in the two.
a < bhas … - 09:42 Tickets #3026,3052,3167,2843,2980,2990,2999,3178,3325,1405,1463,1464,1529,1540,1728,1759,1904,1908,1909,1989,2191,2204,2239,2793,2796,2797,2808,2829,2831,2848,2857,2865,2872,2879,2888,2907,2911,2930,2939,2947,2950,2951,2952,2953,2961,2965,2966,2975,2981,2987,2995,3011,3014,3028,3034,3040,3041,3047,3050,3051,3056,3064,3072,3081,3082,3094,3100,3110,3113,3114,3128,3129,3132,3134,3136,3145,3148,3184,3188,3190,3193,3207,3212,3213,3214,3219,3222,3225,3245,3254,3255,3270,3281,3296,3298,3319,3337,3344,3358,3359,3360,3364,3373,3378,3386,3401,3427,3442,2176,2188,2334,2552,2787,2806,2834,2860,2922,2935,2970,2977,2984,3060,3092,3140,3352,3357,1726,1918,2781,2938,2944,3171,3271,3346,3362,3374 batch updated by
-
Milestone changed
Removing the pre1.9.4 milestone in favor of 1.9.4. - 09:39 Ticket #3150 (New Instantiation - Wrong variability for array reduction) updated by
-
Milestone changed
- 09:35 Ticket #3150 (New Instantiation - Wrong variability for array reduction) updated by
-
Milestone changed
- 09:35 Tickets #2612,3318,3777,3783,3817,3868,3872,3893,3900,3924,3940,3969,4023,4027,4043,4047,2190,2220,2416,2578,2845,2905,3143,3192,3582,3646,3681,3685,3766,3791,3794,3795,3798,3813,3831,3846,3910,3922,3923,3929,3951,4022,4033,4045,4051,4132,2051,2182,2304,2327,2347,2479,2579,2628,2684,2751,2755,3027,3195,3328,3363,3456,3487,3488,3491,3503,3553,3649,3722,3726,3747,3753,3758,3760,3768,3773,3775,3782,3784,3785,3793,3796,3801,3805,3807,3808,3809,3818,3820,3822,3824,3825,3826,3827,3837,3850,3855,3856,3858,3861,3863,3873,3884,3888,3892,3914,3916,3935,3941,3942,3946,3955,3958,3960,3970,3983,3984,4026,4070,1228,1366,2572,2696,3032,3787,3797,3815,3819,3841,3852,3866,3879,3938,3982,3987,4013,2274,4016,4017 batch updated by
-
Milestone changed
Milestone deleted - 09:34 Ticket #3402 (Build Environment - Fix GCC 5.x issues so that it can be used in Windows) updated by
-
Milestone changed
- 09:27 Ticket #3259 (Interactive Environment - list API should return within statement) updated by
-
Type changed
Do you still need this? - 09:25 Ticket #3402 (Build Environment - Fix GCC 5.x issues so that it can be used in Windows) closed by
- fixed
- 09:15 Ticket #3599 (FMI - fmiInitialize crash - stack alignment assumption incorrect) closed by
- fixed: I assume this was fixed in 1.11.0 and will close this. Re-open if the …
- 09:13 Ticket #3524 (Testing Framework - Validation of nightly Cpp tests broken) closed by
- fixed
- 09:12 Ticket #3524 (Testing Framework - Validation of nightly Cpp tests broken) updated by
-
Type, Milestone changed
This is fixed now. And we have a completely new testing environment anyway. - 09:10 Ticket #3671 (Installation program - Add OpenModelica package to deb-src) closed by
- fixed: This was fixed some months ago
- 09:08 Ticket #3699 (Code Generation - Code generated from while loop is slower than recursion) closed by
- wontfix: Closing this discussion
- 07:00 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- Just debugging the info.json-file and the result-files, …
- 06:36 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- Hmmm, I think part of the issue with reporting is it can't read …
2018-02-08:
- 13:51 Ticket #4754 (MetaModelica - Tuple-returning calls are mistyped in if-equations) closed by
- invalid: This is not an error. It's not an if-equation but an if-expression. …
- 13:27 Ticket #4754 (MetaModelica - Tuple-returning calls are mistyped in if-equations) updated by
-
Owner, Version, Component changed
- 13:26 Ticket #4754 (MetaModelica - Tuple-returning calls are mistyped in if-equations) created by
- This script: […] gives the error message: […] The second error …
- 11:19 Ticket #4542 (*unknown* - Performance issues with medium-sized linear systems) updated by
- Siehe #4751 for the treatment of dense matrices.
- 11:18 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) closed by
- fixed
- 11:18 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
-
Status, Owner changed
- 10:20 Ticket #4753 (New Instantiation - NF reductions use a poor generation) created by
- There are several problems with how reductions are handled in the new …
- 07:36 Ticket #4748 (Frontend - OM will pass values from a multiple-output function to “parameters”) closed by
- invalid
- 00:21 Ticket #4748 (Frontend - OM will pass values from a multiple-output function to “parameters”) updated by
- Hi Casella, Yes, It works now, thanks. I did actually try to put it …
2018-02-07:
- 19:51 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- PR2176 enables …
- 18:51 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- Replying to rfranke: > Alternatatively: what about …
- 16:31 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- Alternatatively: what about changing the default for …
- 16:17 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- The following proposed code manipulates PR2170 by checking for 0 …
- 16:12 Ticket #4167 (OMEdit - Getting error as "Compilation process failed. Exited with code 2" ...) reopened by
- I have just run into this again in the v1.12 release. Turns out it is …
- 16:02 Ticket #4732 (New Instantiation - NFTyping.typeSections fails without a specific error message) closed by
- fixed: Fixed in 869806b.
- 15:05 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- PR2170 hard codes 4000 for the Cpp runtime with dense solver, which is …
- 14:44 Ticket #4752 (New Instantiation - Strange error in NFTyping.typeSections) updated by
- Yes, the error message is due to a simple mistake where the wrong …
- 14:44 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
- The smallest test case for debugging is …
- 14:33 Ticket #4752 (New Instantiation - Strange error in NFTyping.typeSections) created by
- Please check …
- 14:26 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) updated by
-
Cc changed
- 14:15 Ticket #3978 (MetaModelica - Front-end becomes slower when running multiple simulations in the same ...) updated by
-
Owner, Component changed
Running the simulation of various models multiple times gives me … - 14:15 Ticket #1886 (New Instantiation - Fix connections of connectors with different names in new instantiation) updated by
-
Milestone changed
- 14:15 Ticket #1879 (New Instantiation - Implement restrictions on pre) updated by
-
Milestone changed
- 14:13 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- The issue at stake here is that the optimal upper limit for linear …
- 13:43 Ticket #2276 (New Instantiation - detecting size mismatch for output arguments in functions) updated by
- Relevant Modelica ticket.
- 13:39 Ticket #4642 (Documentation - Add documentation of __OpenModelica vendor annotations for compilation ...) updated by
- Maybe it would be betteer to add a section with all these annotations …
- 13:38 Ticket #4745 (Documentation - Documentation of __Openmodelica vendor annotations is missing) closed by
- duplicate: Duplicate of #4642
- 13:36 Ticket #1887 (New Instantiation - Don't expand records as function parameters in new instantiation) closed by
- fixed
- 13:36 Ticket #4666 (New Instantiation - Unhandled imported package constant in NF) closed by
- fixed: Fixed as of 07-02-2018
- 13:36 Ticket #1886 (New Instantiation - Fix connections of connectors with different names in new instantiation) closed by
- fixed: The new instantiation sorts the connectors before connecting them, so …
- 13:35 Ticket #4685 (*unknown* - Issue with SerializeModelInfo.serialize in NF-generated model) closed by
- fixed: Fixed as of 07-02-2018
- 13:31 Ticket #1879 (New Instantiation - Implement restrictions on pre) closed by
- fixed: The new instantiation does check these restrictions now.
- 13:28 Ticket #1660 (New Instantiation - Redeclare of package causes lookup of package constant to fail) closed by
- fixed: This has worked for some time in the new instantiation.
- 13:26 Ticket #1755 (New Instantiation - Redeclare causes additional flow-equations) closed by
- fixed: This seems to have been fixed, it works correctly with both the old …
- 12:24 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
-
Cc changed
@sjoelund.se Would it possible to test all libraries with three … - 12:20 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- It would be possible to fix this by adding again an CPP exception(e.g. …
- 10:45 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- Thank you for the link. You conclude "Thus, I suggest these as a new …
- 10:35 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) updated by
- See #4542 for the rationale.
- 10:26 Ticket #4751 (Backend - Change of MAX_SIZE_LINEAR_TEARING) created by
- Commit …
- 10:04 Ticket #4643 (New Instantiation - Problems with scalar x array multiplication in NF) closed by
- fixed: This specific issue seems to be fixed as of 07-02-2018, so I'm closing …
- 10:01 Ticket #4665 (New Instantiation - Issue depending on NF propagates all the way down to SimCode) closed by
- fixed: Fixed as of 07-02-2018
- 09:59 Ticket #4681 (New Instantiation - Wrong DAE data structure generated by the NF) closed by
- fixed: Fixed as of 07-02-2018
- 09:59 Ticket #4683 (New Instantiation - Issues with template in NF-generated code) closed by
- fixed: Fixed as of 07-02-2018
- 09:57 Ticket #4750 (New Instantiation - Simulation results obtained with the NF are scrambled up) created by
- After some recent commits to the NF, a lot of models from the MSL …
- 09:47 Ticket #4684 (New Instantiation - Issue with simcode generation with NF) closed by
- fixed: All reported models clear the SimCode phase as of 07-02-2018
- 09:46 Ticket #4686 (New Instantiation - Problems with C-code generated from NF regarding boolean variables) closed by
- fixed: Fixed as of 07-02-2018, the reported model simulates and verifies …
- 09:44 Ticket #4724 (New Instantiation - Boxed expressions are passed to the back-end which cannot handle them) closed by
- fixed: This seems to be solved as of 07-02-2018, the backend clears successfully
- 09:42 Ticket #4729 (New Instantiation - The NF causes vector assignment of discrete variables to functions to ...) updated by
- This issue seems to be fixed as of 07-02-2018, though there are still …
- 09:40 Ticket #4644 (New Instantiation - Equations corresponding to complex function calls in algorithm ...) closed by
- fixed: This specific issue is solved as of 07-02-2018
- 09:37 Ticket #4689 (New Instantiation - Equations in algorithm sections are lost in NF) closed by
- fixed: Fixed as of 07-02-2018
- 09:36 Ticket #4725 (New Instantiation - Issues with equation count in NF due to incorrect conditional ...) closed by
- fixed: Fixed as of 07-02-2018
- 09:33 Ticket #4690 (New Instantiation - Issue with equation count in NF) closed by
- fixed: Fixed in [https://github.com/OpenModelica/OMCompiler/commit/31c7f1644 …
- 09:29 Ticket #4730 (New Instantiation - Issue with function generation after NF processing) closed by
- fixed: Fixed on 02-06-2018
- 09:21 Ticket #4749 (*unknown* - Error: variable wea.lat not found in scope (...) while flattening model) updated by
-
Status, Owner, Milestone changed
- 09:18 Ticket #4748 (Frontend - OM will pass values from a multiple-output function to “parameters”) updated by
- Have you tried it this way? […] As far as I understand, you can't …
- 09:02 Ticket #4748 (Frontend - OM will pass values from a multiple-output function to “parameters”) updated by
-
Status, Owner, Component changed
- 07:07 Ticket #4749 (*unknown* - Error: variable wea.lat not found in scope (...) while flattening model) updated by
- Further to the bug report above I think it's useful to note that our …
- 06:44 Ticket #4749 (*unknown* - Error: variable wea.lat not found in scope (...) while flattening model) created by
- We have a bug here arising from use of the latest nightly version of …
- 06:32 Ticket #3277 (*unknown* - Discrete Fourier Transform support by OM) updated by
- If someone wants to make Fourier analysis of OM output, it is now …
- 05:17 Ticket #4748 (Frontend - OM will pass values from a multiple-output function to “parameters”) created by
- Hello, I have come across an issue in relation to calling a function …
2018-02-06:
- 14:32 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
- Should work fine now 1d1f81/OMEdit.
- 13:59 Ticket #4717 (OMEdit - Cannot modify hidden classes) updated by
- `Tools->Options->General->Libraries Browser->Show Hidden Classes …
- 13:51 Ticket #4717 (OMEdit - Cannot modify hidden classes) closed by
- fixed: Done in 8f5caa/OMEdit.
- 13:46 Ticket #4640 (OMEdit - Categorize OMEdit messages) updated by
- See https://github.com/OpenModelica/OMEdit/pull/159
- 09:55 Ticket #4747 (Build Environment - Treatment of singular equation systems in source code FMUs) created by
-
OMCompiler comes with the LAPACK solver
3rdParty/dgesvthat "is …
2018-02-05:
- 15:20 Ticket #4746 (Frontend - Trace back where a given component is defined (or modified) in a class) updated by
-
Component changed
- 15:19 Ticket #4746 (Frontend - Trace back where a given component is defined (or modified) in a class) updated by
-
Summary changed
- 15:11 Ticket #4746 (Frontend - Trace back where a given component is defined (or modified) in a class) created by
- Inheritance is widely used to build Modelica models a) to factor out …
- 14:06 Ticket #4744 (Documentation - Options to set flags of homotopy solver are not visible in the ...) closed by
- invalid: The homotopy flags are simulation flags and can be found here: …
- 13:27 Ticket #4745 (Documentation - Documentation of __Openmodelica vendor annotations is missing) created by
-
There are now quite some
__OpenModelicavendor annotations … - 13:12 Ticket #4744 (Documentation - Options to set flags of homotopy solver are not visible in the ...) created by
- I tried to track the parameters Bernhard was showing in his OM …
- 08:41 Ticket #4743 (OMEdit - Del as a keyboard substitute in OMEdit) closed by
- fixed: Done in 090db0/OMEdit.
Note:
See TracTimeline
for information about the timeline view.
