Timeline
2019-02-06:
- 14:46 Ticket #5048 (OMEdit - Wrong error messages) updated by
- Should be fixed with PR: …
- 13:41 Ticket #4369 (OMEdit - Improper use of square brackets) closed by
- fixed: Done in 8db5bf7/OMEdit.
- 12:58 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
- We do highlight the connection on selection i.e., when you select the …
- 12:35 Ticket #5314 (OMEdit - Openmodelica corrupts files during save operation) updated by
- Can you provide some test use case? I personally didn't encounter any …
- 10:46 Ticket #5048 (OMEdit - Wrong error messages) updated by
-
Cc changed
> 4) flange_a falsely reported as missing > If we open … - 10:07 Ticket #4226 (OMEdit - Reusing debug config name overwrites old config) closed by
-
worksforme: This is not valid anymore. When I go to rename
test1
totest2
I …
2019-02-05:
- 19:47 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
- In PR2920 i …
- 19:47 Ticket #5303 (Backend - Should the default for --maxMixedDeterminedIndex be increased?) updated by
- I pushed it to 10 in …
- 16:37 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
- I'm trying this commit on our build system (disabling auto-provides; …
- 14:57 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
- […] Didn't seem to work :(
- 13:18 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
- We can't remove the requires though (or the correct dependencies would …
- 12:05 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
-
Status, Owner changed
2019-02-04:
- 22:44 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) updated by
-
Description changed
- 20:54 Ticket #5317 (*unknown* - RPM's might have too many provides) updated by
-
Cc changed
- 20:36 Ticket #5317 (*unknown* - RPM's might have too many provides) created by
- The rpm's provided by openmodelica has provides of many bundled …
- 20:22 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
- > Yes, but that gives you no information on where the connection runs …
- 15:28 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
- Replying to anonymous: > If you leave the mouse pointer on …
- 15:21 Ticket #5316 (Backend - Error: The given system is mixed-determined. [index > 3] is very ...) created by
- Sometimes the back-end stops with this error: […] see, e.g., …
- 14:55 Ticket #5242 (Testing Framework - PowerSystems should be updated to 1.0.0 in ...) updated by
- Thanks Ruediger!
- 13:32 Ticket #5315 (FMI - Compiler fails when model has a long fileNamePrefix) updated by
-
Summary changed
- 13:31 Ticket #5315 (FMI - Compiler fails when model has a long fileNamePrefix) created by
- FMU export (with buildModelFMU) fails when model name is too long. …
- 13:16 Ticket #5242 (Testing Framework - PowerSystems should be updated to 1.0.0 in ...) closed by
- fixed: There was a wrong link in README.md that I had updated on Dec 27. Now …
- 10:08 Ticket #5314 (OMEdit - Openmodelica corrupts files during save operation) created by
- When saving, sometimes the GUI freezes and crashes. OmEdit has to be …
- 07:41 Ticket #5313 (OMEdit - Highlight the connections in diagram) updated by
- If you leave the mouse pointer on a connection for two seconds you see …
2019-02-03:
- 21:43 Ticket #5313 (OMEdit - Highlight the connections in diagram) created by
- When working with more advanced networks, it is virtually impossible …
- 17:32 Ticket #5312 (NF API - OMEdit does not handle final parameter bindings properly) updated by
-
Summary changed
- 17:31 Ticket #5312 (NF API - OMEdit does not handle final parameter bindings properly) created by
- Please consider the attached test package. There are currently three …
2019-02-02:
- 23:17 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to anonymous: > > {{{ > Of course. Just change …
- 12:11 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- […] The problem is in the mechanical block. How can we solve this?
2019-02-01:
- 18:53 Ticket #5311 (FMI - Bad behavior of FMUs exported from OM when stopTimeDefined is set to ...) updated by
-
Milestone changed
- 18:41 Ticket #5310 (OMEdit - Add checkbox for newInst in OMEdit) updated by
- Replying to casella: > Replying to perost: > …
- 15:55 Ticket #5311 (FMI - Bad behavior of FMUs exported from OM when stopTimeDefined is set to ...) created by
- Dear All, I try to use FMUs exported from OM as FMU for co-simulation …
- 14:00 Ticket #5310 (OMEdit - Add checkbox for newInst in OMEdit) updated by
- Replying to perost: > Since we're aiming at switching to …
- 12:56 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) updated by
- Replying to adeas31: > I don't prefer to modify the …
- 12:11 Ticket #5310 (OMEdit - Add checkbox for newInst in OMEdit) created by
- Since we're aiming at switching to the new frontend in 2.0.0 I think …
- 10:50 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) updated by
- I don't prefer to modify the values received from omc. I prefer …
- 09:30 Ticket #5175 (OMEdit - OMEdit cannot create models as separate .mo files) updated by
- Aha, at least its now clear for me what you want :) I will see how …
- 09:25 Ticket #5175 (OMEdit - OMEdit cannot create models as separate .mo files) updated by
- In fact, my original description of the issue was inaccurate and …
- 09:23 Ticket #5044 (OMEdit - Choice of C compiler on OMEdit under Linux is currently confusing) updated by
- See OMEdit:PR:212.
2019-01-31:
- 18:42 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
- thanks a lot @perost and @adrpo. I'll stay tuned!
- 18:00 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
- I've been working on this for some time now and I'm trying to push my …
- 17:52 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
- Replying to ceraolo: > > > […] But the interactive API …
- 17:42 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) updated by
- > Well its hard to know if the number is a regular decimal value or is …
- 17:30 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
- > […] But the interactive API still uses the old frontend […] …
- 15:24 Ticket #5309 (Run-time - Descriptions of the meaning of Complex variable are lost in the ...) created by
- Consider this simple test case […] When you open the Variables …
- 15:09 Ticket #5175 (OMEdit - OMEdit cannot create models as separate .mo files) updated by
- Replying to adeas31: > There is not attachment. Sorry …
- 14:54 Ticket #5274 (OMEdit - Allow opening the transformation debugger upon successful simulation) updated by
- Replying to adeas31: > Well you can also open it via …
- 14:49 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
- There are also other problems with dsres: when you use Complex …
- 14:45 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) updated by
- I guess something like […] would do :)
- 12:05 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) closed by
- fixed: Fixed in 58b2c7d8. The issue was that …
- 10:09 Milestone 1.13.2 completed
- 09:51 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
- We would need to change result-file format in that case. I don't …
- 09:43 Ticket #5175 (OMEdit - OMEdit cannot create models as separate .mo files) updated by
- There is not attachment. How the things are stored is driven by the …
- 09:28 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
-
Cc changed
Martin, is it a good idea to include string parameters in the result file. - 09:26 Ticket #5274 (OMEdit - Allow opening the transformation debugger upon successful simulation) updated by
-
Well you can also open it via
File->Open Transformations File
and … - 07:39 Ticket #3274 (New Instantiation - Inheritance problems on power systems library) closed by
- fixed: Regarding …
2019-01-30:
- 19:47 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
- Here's a script to reproduce the issue: […] I have no clue why …
- 19:41 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
- The link that you shared says, […] So its also using …
- 19:21 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
- Sorry my bad guys.....the problem is that we don't list string …
- 19:17 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) updated by
- Yeah that's true. I didn't even noticed the comment. Well its hard to …
- 19:10 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) updated by
-
Description changed
- 19:04 Ticket #5274 (OMEdit - Allow opening the transformation debugger upon successful simulation) updated by
- Replying to adeas31: > There is an option …
- 18:58 Ticket #5308 (New Instantiation - The NF wrongly computes cardinality when translating MultiBody model) created by
- The code to simulate …
- 16:22 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
- Replying to adeas31: > But for the GUI you have to mark …
- 14:50 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) updated by
- Looking at your code it seems that you did not consider comment3
- 14:38 Ticket #5050 (OMEdit - OMEdit badly truncates numerical values) closed by
- fixed: Done in bef7e4f/OMEdit.
- 14:29 Ticket #5190 (OMEdit - Behavoiur of Save icon in documentaton browser of OMEdit is misleading) closed by
- fixed: Done in c8fa402/OMEdit.
- 14:28 Ticket #5207 (OMEdit - Type of Jacobian computation not retained between simulations) closed by
- fixed: Fixed in 72b57be/OMEdit.
- 13:48 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
- But for the GUI you have to mark the string parameter …
- 13:39 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
- I do not see any issue, actually it's even possible now via …
- 13:22 Ticket #5291 (OMEdit - Issue with ...) updated by
- I still see the same problem, I'm not sure what other setting could I …
- 12:49 Ticket #5177 (OMEdit - Changing string parameters between simulations) updated by
-
Cc changed
Willi, is this possible? - 12:33 Ticket #5195 (Initialization - Division by zero during the initialization via file (.mat), of the ...) updated by
-
Cc changed
- 12:21 Ticket #5258 (OMEdit - Top-level parameter tolerance is replaced by OMEdit with the ...) updated by
-
Cc changed
- 12:18 Ticket #5274 (OMEdit - Allow opening the transformation debugger upon successful simulation) updated by
- There is an option `Tools->Options->Debugger->Always show …
- 12:14 Ticket #5286 (OMEdit - Log flag options are reset at every run) closed by
- worksforme
- 11:08 Ticket #5306 (Run-time - OMC on Windows is broken because of linker issues with sundials) closed by
- fixed: I installed the latest nightly and it works fine, it was probably some …
- 10:30 Ticket #5291 (OMEdit - Issue with ...) updated by
-
Cc changed
> Here there are other two weird things: one is that the former … - 09:44 Ticket #5043 (Build Environment - Use clang also on Windows) updated by
-
Milestone changed
- 09:44 Ticket #5043 (Build Environment - Use clang also on Windows) updated by
- See #5307
- 09:43 Ticket #5290 (OMEdit - OMEdit should look the same on high-resolution, high-dpi screens) updated by
- See #5307
- 09:43 Ticket #5307 (Build Environment - Update OMDev to include clang and updated QT libraries) created by
- We need to update OMDev to the latest version of MSYS. This will …
- 09:37 Ticket #5306 (Run-time - OMC on Windows is broken because of linker issues with sundials) updated by
- This is my setting: …
Note:
See TracTimeline
for information about the timeline view.