Timeline
2019-07-16:
- 21:52 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
-
Status, Owner, Component changed
This isn't a frontend issue, it's the backend that counts … - 21:07 Ticket #5592 (New Instantiation - Issue with NF and index reduction) created by
-
Please check
ModelicaTest.Rotational.AllComponents. It runs fine … - 20:45 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) closed by
- invalid: OK, most likely a frontend issue, see #5591.
- 20:44 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) created by
- Please run the following test case […] OMEdit outputs two red error …
- 20:15 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
- Ah i see, but this is a problem in the frontend or backend? It does …
- 14:10 Ticket #5567 (OMEdit - The engine V6 animation is completely black) updated by
- I added the complete AutoDesk color map. …
- 14:00 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
- Replying to Karim.Abdelhak: > I don't know if i understand …
- 13:54 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) closed by
- fixed: OK. I'm going to close this ticket because the original issue is now …
- 13:53 Ticket #5590 (Backend - Bad dynamic state selection leads to singular initialization) created by
- Consider …
- 12:21 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to casella: > Replying to [comment:23 …
- 12:05 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) updated by
- Very nice, no more bogus warnings :)
- 12:04 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
- Works fine with the latest nightly, thanks!
- 12:01 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > Looking at the latest test …
- 11:59 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > I ran following .mos file: …
- 11:43 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to casella: > Replying to [comment:22 …
- 11:40 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
- I don't know if i understand this correctly, isn't an input supposed …
- 11:31 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > All models can be compiled …
- 11:26 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
-
Summary changed
- 10:58 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) created by
- Please run the following test case […] OMEdit outputs two red error …
- 10:42 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Looking at the latest test result changes from …
- 10:20 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
- The issue here is that when we delete a res-box its connecting lines …
- 09:38 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) updated by
-
The only optimization running before the module
evaluateParameters… - 09:24 Ticket #4992 (Testing Framework - Should we skip some versions of the Buildings library in Hudson ...) updated by
- I'm also strongly in favor of removing old libraries. They are no …
- 09:22 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
-
Priority changed
Let's see if we can push this in 1.14.0, OMEdit should never crash. - 09:15 Ticket #5584 (OMEdit - Parameter table editor) closed by
- duplicate: See #5407
- 09:13 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 09:11 Ticket #5583 (OMEdit - Conditional components) closed by
- duplicate: Toni, these are indeed very old issues, see #2081, #2661. Ultimately, …
- 09:03 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) updated by
- Replying to Karim.Abdelhak: > …
- 08:35 Ticket #5586 (FMI - FMU info) updated by
- This is basically a matter of integration. We plan to improve the …
- 08:18 Ticket #5587 (Backend - Bad value for interpolation in delayImpl) updated by
- I close this ticket since the behavior of the delay operator is …
- 08:11 Ticket #5587 (Backend - Bad value for interpolation in delayImpl) closed by
- fixed
- 07:38 Ticket #5586 (FMI - FMU info) updated by
- Just a small addition to my comment 8. I think that it is an …
- 04:01 Ticket #4992 (Testing Framework - Should we skip some versions of the Buildings library in Hudson ...) updated by
- @sjolund.se, @adrpo: Buildings 6.0.0 has been released: …
2019-07-15:
- 21:05 Ticket #5586 (FMI - FMU info) updated by
- Replying to lochel: > You could export your Modelica …
- 19:40 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) created by
- Steps to reproduce: - load and open Test - open RL_Q - delete QSensor …
- 13:42 Ticket #5587 (Backend - Bad value for interpolation in delayImpl) created by
- The following example using delay operator is not properly handled …
- 13:42 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- All models can be compiled and simulated now, although the electrical …
- 10:04 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
-
Inlining function calls with
InlineAfterIndexReductionbefore … - 08:49 Ticket #5586 (FMI - FMU info) updated by
- You could export your Modelica models as model exchange FMUs and then …
- 08:19 Ticket #5586 (FMI - FMU info) updated by
- Replying to lochel: > I think this information is already …
- 06:10 Ticket #5586 (FMI - FMU info) updated by
- I think this information is already available in OMSimulator: …
2019-07-14:
- 17:18 Ticket #5586 (FMI - FMU info) updated by
-
Priority changed
- 17:17 Ticket #5586 (FMI - FMU info) updated by
- well, I' not an expert of FMUs and I don't exactly know the meaning …
- 16:35 Ticket #5586 (FMI - FMU info) updated by
-
Description changed
2019-07-13:
- 22:42 Ticket #5581 (FMI - FMU - ME accuracy) updated by
- The problem seems to be not in the FMU, but in the way the FMU is used …
- 22:32 Ticket #5586 (FMI - FMU info) updated by
-
Description changed
- 22:30 Ticket #5586 (FMI - FMU info) created by
- Consider the enclosed FMU. When loaded from Dymola the following very …
- 18:19 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- @adeas31, can we have a setting in OMEdit to fflush the log after each …
- 18:06 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- Ok. Nevermind, I can reproduce it when opening Modelica.Media.Air.
- 18:00 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- I cannot reproduce this. For me opening Modelica.Media takes 1-2 …
- 09:47 Ticket #5581 (FMI - FMU - ME accuracy) updated by
-
Description changed
- 09:39 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) closed by
- fixed
- 06:22 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) closed by
- fixed
- 05:46 Ticket #5585 (OMEdit - Parameter record editor) created by
- Dear OM-developers, using models with a large number of parameters is …
- 05:37 Ticket #5584 (OMEdit - Parameter table editor) created by
- Dear OM-developers, parameter tables are a great possibility to …
- 05:25 Ticket #5583 (OMEdit - Conditional components) created by
- Dear OM-developers, conditional connectors (depending on a Boolean …
- 04:10 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) updated by
-
--evaluateProtectedParameters=trueonly affects the backend … - 04:04 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
- Should be fixed with …
2019-07-12:
- 23:29 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to casella: > What about preventing the implicit …
- 22:24 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
-
I would add
GenerateEvents, which clearly has a structural … - 22:20 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > One solution would be to …
- 21:57 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
- I updated the module, these are currently the structural annotations: …
- 19:31 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) updated by
-
Component changed
Should be fixed by PR: … - 19:26 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
-
Cc changed
@lochel, @Karim, I couldn't figure out your latest comment in ticket … - 19:24 Ticket #5581 (FMI - FMU - ME accuracy) updated by
-
Priority changed
- 19:22 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) created by
- If one tries to flatten this model with {{{-d=newInst …
- 19:08 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) closed by
- fixed: Fixed in 6bd362/OpenModelica.
- 17:29 Ticket #5571 (Interactive Environment - NF API can't fetch bitmap annotation) closed by
- fixed: Fixed with 46e99d/OpenModelica.
- 16:24 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- In addition to what @lochel said i will point out the following: If …
- 15:27 Ticket #5581 (FMI - FMU - ME accuracy) created by
- I'm not aware of possible reasons for which a simulation containing a …
- 15:09 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- After spending a lot of time on this issue, we came up with a minimal …
- 13:16 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- We are trying to adhere strictly to the specification. From this point …
- 13:12 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) updated by
- Replying to Karim.Abdelhak: > Any thoughts on the second …
- 13:12 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) created by
- I scanned the specification looking for the various meanings of …
- 12:44 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- @Karim I'm trying to make sense of this ticket, but I need some help …
- 12:29 Ticket #5569 (OMEdit - Changes to additional translation flags are often ignored until OMEdit ...) closed by
- fixed: OK, I missed that, thanks!
- 09:13 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- The old frontend behaves differently from the new frontend here, thats …
- 09:10 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
-
Cc changed
- 06:28 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Well. It might be that OMEdit should ask the user if the file should …
2019-07-11:
- 19:43 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Ok, thanks for pointing me, i clearly overlooked that. That solves the …
- 19:10 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) updated by
- Replying to Karim.Abdelhak: > Any thoughts on the second …
- 19:01 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) updated by
- Replying to perost: > As the model is written I think it …
- 18:01 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) updated by
- Replying to perost: > I would say that that model is not …
- 17:56 Ticket #5578 (MetaModelica - Qualified tuple assignments in MetaModelica) updated by
-
Status, Owner changed
- 17:56 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Replying to Filip Ježek: > Well, as I see, the problem is …
- 17:56 Ticket #5578 (MetaModelica - Qualified tuple assignments in MetaModelica) updated by
-
Component changed
- 17:53 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) updated by
- I would say that that model is not legal according to the …
- 15:30 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) created by
- Consider following model: […] The old frontend detected the …
- 15:22 Ticket #5578 (MetaModelica - Qualified tuple assignments in MetaModelica) created by
- Following code inside an arbitrary match of an equation returning a …
- 11:39 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- With the old frontend everything works when using …
- 11:27 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Well, as I see, the problem is not in the improper usage of saveTotal, …
- 10:58 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- > In that case opening a "mot" file could be done using the code …
- 08:22 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Replying to anonymous: > It is a bit strange that we can …
- 02:10 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- It is a bit strange that we can save through the GUI a file that we …
2019-07-10:
- 21:36 Ticket #5572 (Backend - Delay operator in a for loop of an algorithm section) updated by
-
Cc, Owner, Component changed
The problem with this is that we fetch the delay expressions to be … - 21:29 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
- Should be fixed with PR: …
- 21:09 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- In fact, it would be even better if OMEdit also caught the Only …
- 21:05 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) reopened by
- I just added the documentation of saveFileTotal() to the NF …
- 20:04 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) closed by
- fixed: DidnT read the whole comments. Sorry
- 20:01 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- So does it means, i can't open a model from save total from OMEdit(GUI)?
- 19:58 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) reopened by
- This error happened to me on 1.14.0-dev-26584-gae23951b15.
- 16:14 Ticket #4611 (Backend - Processing arrays of records fails) updated by
-
Summary changed
- 16:12 Ticket #4611 (Backend - Processing arrays of records fails) updated by
- The computation for the size has been updated in …
- 15:01 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
-
Priority, Status, Milestone changed
This should get fixed in 1.14.0 as #5431 - 14:10 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
- Ah, ok, I'll do some debugging.
- 14:08 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
- Replying to adrpo: > As far as I remember if fixed the …
- 14:06 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
- Nightly build on 9/7/2019
- 14:05 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
- As far as I remember if fixed the escaping when I fixed #5431.
- 14:04 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) updated by
- Which version of OMC is this?
- 14:01 Ticket #5561 (OMEdit - OMEdit should show values also in case of identical curves) closed by
- fixed: Fixed in 8eee160/OpenModelica.
- 14:00 Ticket #2166 (OMEdit - Snap to curve in OMEdit plot) closed by
- fixed: Fixed in 8eee160/OpenModelica.
- 12:49 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) closed by
- fixed
- 12:48 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) updated by
- Replying to adrpo: > If the table cannot be opened I think …
- 12:46 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) created by
- […] when trying to export above model with uncheck {{{Enable old …
- 11:37 Ticket #5576 (Backend - Solve array equation in backend for array of records) updated by
-
Description changed
- 11:36 Ticket #5576 (Backend - Solve array equation in backend for array of records) created by
- We get an error for arrays of records in the SimCode-phase. When …
- 09:32 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- Ping :) Is there any unanticipated difficulty in carrying this out?
- 07:46 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
-
Component changed
2019-07-09:
- 15:37 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) created by
-
I tried to open the sub-packages of
Modelica.Mediain the … - 12:27 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) updated by
-
Component changed
- 12:23 Ticket #5566 (OMEdit - OMEdit no longer shows the 3D Animation windows) closed by
- fixed
- 10:27 Ticket #5566 (OMEdit - OMEdit no longer shows the 3D Animation windows) updated by
- Fixed in 5e27012/OpenModelica.
- 09:58 Ticket #5566 (OMEdit - OMEdit no longer shows the 3D Animation windows) updated by
- Thank Adeel! :)
- 09:42 Ticket #5569 (OMEdit - Changes to additional translation flags are often ignored until OMEdit ...) updated by
- This is because you are changing the global flags and your local model …
- 09:27 Ticket #5566 (OMEdit - OMEdit no longer shows the 3D Animation windows) updated by
- > From a user's perspective, if I push a "Simulate with animation" …
Note:
See TracTimeline
for information about the timeline view.
