Timeline
2020-01-20:
- 21:14 Ticket #5795 (*unknown* - The backend does not compute strong components of initial equations ...) updated by
-
Cc changed
- 21:13 Ticket #5795 (*unknown* - The backend does not compute strong components of initial equations ...) updated by
- @Karim, I attached the library in a mail to you on 20/01/2020 22:12
- 21:11 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- See also #5795, which could be related because it causes strongly …
- 21:04 Ticket #5795 (*unknown* - The backend does not compute strong components of initial equations ...) created by
- Please have a look at the …
- 20:59 Ticket #5794 (OMEdit - PowerGrids model fails during compilation in OMEdit but works fine ...) updated by
- Most likely because OMEdit writes the file in: […] which I bet is …
- 20:45 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- For the record, I understood during today's webmeeting that the …
- 20:37 Ticket #5794 (OMEdit - PowerGrids model fails during compilation in OMEdit but works fine ...) updated by
- Attachments by e-mail 17/01/20 19:28
- 20:35 Ticket #5794 (OMEdit - PowerGrids model fails during compilation in OMEdit but works fine ...) created by
- Please try simulating …
- 08:50 Ticket #5793 (*unknown* - Comments in enumerations are not shown in OMEdit in case of type imports) created by
-
Please check the attached test package. If you open
Systemwith …
2020-01-19:
2020-01-18:
- 20:21 Ticket #5790 (Installation program - New package for Linux Mint Tricia) closed by
- fixed: I rebooted my computer and now the installation is well taken into …
- 14:55 Ticket #5792 (*unknown* - Activate Device) created by
2020-01-17:
- 15:08 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
-
Cc, Component changed
- 14:02 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
-
Owner changed
This turned out to be a back-end issue. The Boolean variable … - 12:51 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- Maybe, #3511 is intressting for the issue.
- 10:33 Ticket #5791 (FMI - Wrong valueReference in modelDescription.xml) updated by
- Please consider also the following model: […] Wrong output of …
- 10:09 Ticket #5791 (FMI - Wrong valueReference in modelDescription.xml) updated by
-
Version changed
- 10:08 Ticket #5791 (FMI - Wrong valueReference in modelDescription.xml) updated by
-
Status, Owner changed
- 10:08 Ticket #5791 (FMI - Wrong valueReference in modelDescription.xml) created by
- OpenModelica produces a wrong FMU for the following model: […] …
- 10:01 Ticket #5790 (Installation program - New package for Linux Mint Tricia) updated by
- Tara and Tessa are simply symbolic links to Bionic. I did the same for …
- 09:00 Ticket #5790 (Installation program - New package for Linux Mint Tricia) updated by
-
Status, Owner changed
2020-01-16:
- 22:27 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- I scanned it manually, here are the bottlenecks: […] Now, …
- 22:10 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- Replying to casella: > @Karim, I'll check tomorrow with …
- 22:05 Ticket #5790 (Installation program - New package for Linux Mint Tricia) created by
- Hi, could you please compile and make available the latest …
- 21:53 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- @Karim, I'll check tomorrow with Dymola, now I can't use it remotely. …
- 17:33 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- I was able to change the detection of nonlinearity for torn systems …
- 13:44 Ticket #5789 (OMEdit - OMEdit can't delete ssp components) created by
- When working on a OMSimulator model it is not possible to delete a …
- 13:04 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) updated by
- But I still would prefer whenever OMSimulator throws …
- 10:21 Ticket #5778 (OMEdit - Wrong links to OpenModelica Documentation in setup dialog and Help menu bar) closed by
- fixed: This is now fixed for master, 1.14 and 1.15
- 10:18 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) closed by
- invalid: This is not an issue of OMEdit. I traced it back to OMSimulator core …
2020-01-15:
- 22:57 Ticket #5788 (OMEdit - Cannot input parameters redefined in child models using OMEdit) created by
- Steps to reproduce the issue: - open …
- 17:05 Ticket #5766 (Run-time - Number of homotopy steps out of control) updated by
-
It's not clear to me what is the meaning of
-ilsif we have … - 15:28 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- Analyzing this system by hand yields a better solution, i guess the …
- 14:59 Ticket #5766 (Run-time - Number of homotopy steps out of control) updated by
-
Indeed
-ilswill be read but got overwritten and I wasn't aware of … - 14:08 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
-
I ran the test with
--profiling= alland attached the result … - 13:58 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- Just as a reference i will post the Backend structure for solvability: …
- 13:51 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
-
I updated the
-d=dumpLoopsoption for better visual partitioning … - 13:44 Ticket #5760 (OMEdit - Improve behaviour of back/forward buttons in OMEdit Documentation browser) updated by
- I think understood what the problem is. I have a laptop with a 13-inch …
- 12:47 Ticket #5773 (OMEdit - Correctly show resistance unit of measure) updated by
- @adeas31, if you explain us where in the code we should add the …
- 12:45 Ticket #5741 (Backend - Disabling tearing breaks code generation in power system model) updated by
- See comment in the pull request. A link to an online document and/or …
- 12:42 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) closed by
- fixed
- 12:41 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) updated by
-
Status, Owner, Milestone changed
Never mind that. - 12:40 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- @Karim, can you run the test case with the profiler with …
- 12:36 Ticket #5784 (OMEdit - Problems displaying text on menus and other elments) updated by
- Replying to ceraolo: > So a Qt upgrade should immediately …
- 12:30 Ticket #5779 (Backend - Enable/disable root finding) updated by
- In deed an event iteration would not be suitable for a real time …
- 12:26 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- I had to change [https://github.com/OpenModelica/OpenModelica/pull/662 …
- 12:19 Ticket #5773 (OMEdit - Correctly show resistance unit of measure) updated by
- To complete the info: the unit of measure or resistance should be with …
- 11:14 Ticket #5741 (Backend - Disabling tearing breaks code generation in power system model) updated by
- See PR #360. …
- 11:03 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) updated by
- The tests run fine on the master branch but produce errors on …
- 10:49 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- I found a fix with …
- 09:28 Ticket #5760 (OMEdit - Improve behaviour of back/forward buttons in OMEdit Documentation browser) reopened by
- I'm using the latest nightly. When I hit the back button, the previus …
- 09:03 Ticket #5784 (OMEdit - Problems displaying text on menus and other elments) updated by
- > This usually happens to me when I connect my laptop to a docking …
- 08:52 Ticket #5781 (OMEdit - Logarithmic scale) updated by
- Can you give some more information? Share the model and show the …
- 08:50 Ticket #5784 (OMEdit - Problems displaying text on menus and other elments) updated by
- This usually happens to me when I connect my laptop to a docking …
- 07:33 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) updated by
- The …
2020-01-14:
- 23:27 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
-
I also checked the
-d=optdaedumpouptut. The … - 22:35 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- [https://github.com/modelica/ModelicaStandardLibrary/blob/1e613c3679563 …
- 21:33 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- Replying to casella: > Replying to [comment:2 …
- 19:02 Ticket #5787 (Interactive Environment - Flag -d=bltdump does not produce any output anymore) updated by
-
Milestone changed
Replying to AnHeuermann: > The name is misleading, since … - 18:59 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
- Replying to mahge930: > Oh never-mind. I overlooked the …
- 18:57 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) updated by
- Will do, thanks!
- 18:56 Ticket #5780 (*unknown* - Meaning of version, milestone and version in trac tickets) closed by
- fixed: Thank you Adrian!
- 18:54 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- Replying to Karim.Abdelhak: > This is done for every call …
- 18:30 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
-
Replying to Karim.Abdelhak:
> You are right,
$cse33… - 15:37 Ticket #5787 (Interactive Environment - Flag -d=bltdump does not produce any output anymore) updated by
-
-d=dumpindxdaewill get the same informations that the "old" bltdump … - 15:31 Ticket #5787 (Interactive Environment - Flag -d=bltdump does not produce any output anymore) updated by
- bltdump from v1.13.2: […]
- 15:15 Ticket #5787 (Interactive Environment - Flag -d=bltdump does not produce any output anymore) updated by
- The bltdump itself is working fine (tested on Windows 10, 64 bit …
- 13:58 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
-
Oh never-mind. I overlooked the increment
i++. The lines are not … - 13:55 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
- Replying to casella: > @mahge930, would you mind having a …
- 12:20 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) updated by
- Fixed with [https://github.com/OpenModelica/OpenModelica/pull/658 …
- 11:23 Ticket #5780 (*unknown* - Meaning of version, milestone and version in trac tickets) updated by
- The Version on the RHS was a custom field left from a really old Trac …
- 11:11 Ticket #5787 (Interactive Environment - Flag -d=bltdump does not produce any output anymore) created by
- It seems that -d=bltdump does not produce any output since 1.14. …
- 10:12 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) updated by
- The central error is presumably […] from omediterror.txt.
- 09:19 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
-
You are right,
$cse33and$cse45should be the same. I am … - 04:50 Ticket #5761 (FMI - Symbolic Jacobians not correct for Linearization and FMI) updated by
- Replying to AnHeuermann: > There is a singularity at t=1, …
2020-01-13:
- 21:57 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- Replying to perost: > Ok, I just assumed they'd be …
- 20:57 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- Replying to casella: > Maybe I'm not using the correct …
- 20:36 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- Maybe I'm not using the correct terminology (I'm not really a compiler …
- 18:46 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- Replying to casella: > I find it a bit weird that one can …
- 17:50 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- I find it a bit weird that one can write legal Modelica code whose …
- 17:43 Ticket #5761 (FMI - Symbolic Jacobians not correct for Linearization and FMI) closed by
- worksforme: Replying to Karim.Abdelhak: Indeed the analytical …
- 16:57 Ticket #5782 (New Instantiation - Failure to instantiate EletricalEnergyStorage Libray) updated by
- Replying to perost: > Sorry, I was talking about record …
- 16:56 Ticket #2664 (FMI - Probelm with handling "when statement" in an FMU) updated by
- Replying to AnHeuermann: > The FMI import is deprecated, …
- 16:54 Ticket #5786 (OMEdit - OMEdit does not handle consecutive loading and unloading of mol files ...) updated by
-
Summary changed
- 16:52 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) updated by
- It could be interesting to see the stacktrace. Tools | Open Working …
- 16:48 Ticket #5784 (OMEdit - Problems displaying text on menus and other elments) updated by
-
Priority, Owner, Component, Milestone changed
Possibly a duplicate, see #5290. @adeas31, can you please comment on … - 16:45 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- I guess the reasons are the typos in your script of comment:3. I …
- 16:44 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- Replying to casella: > BTW, see discussion on this …
- 16:42 Ticket #5786 (OMEdit - OMEdit does not handle consecutive loading and unloading of mol files ...) created by
- When testing different versions of a mol file I got some error …
- 16:37 Ticket #5761 (FMI - Symbolic Jacobians not correct for Linearization and FMI) updated by
- There is a singularity at t=1, so what should be the correct …
- 16:30 Ticket #5782 (New Instantiation - Failure to instantiate EletricalEnergyStorage Libray) updated by
- Replying to casella: > @perost, I'm not 100% sure what the …
- 16:27 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- BTW, see discussion on this …
- 16:24 Ticket #5758 (Run-time - Add separate logging of global homotopy solver) updated by
- Sounds good. I'll try this ASAP on the next nightly build.
- 16:22 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
-
Status, Owner changed
@mahge930, would you mind having a look? Thanks! - 16:20 Ticket #5782 (New Instantiation - Failure to instantiate EletricalEnergyStorage Libray) updated by
- @perost, I'm not 100% sure what the specification says about this, but …
- 16:17 Ticket #2664 (FMI - Probelm with handling "when statement" in an FMU) updated by
- The FMI import is deprecated, use OMSimulator instead. We should add a …
- 16:16 Ticket #5781 (OMEdit - Logarithmic scale) updated by
-
Owner, Component, Milestone changed
- 16:15 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) updated by
-
Summary changed
- 16:15 Ticket #5780 (*unknown* - Meaning of version, milestone and version in trac tickets) updated by
- Replying to perost: > As for why there's a version field …
- 16:13 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) updated by
- While trying to safe the spp file to add as example OMEdit crashes …
- 16:08 Ticket #5785 (OMEdit - OMEdit crashes when editing OMSimulator model) created by
-
I'm trying to add a connector between
testInput.integertable1.yand … - 14:26 Ticket #5733 (OMEdit - Duplicate a model) closed by
- fixed: Ported the fix to 1.15 branch so it will be part of 1.15 release.
- 14:23 Ticket #5784 (OMEdit - Problems displaying text on menus and other elments) created by
- The space to be allocated for the text of some graphical elements in …
- 14:05 Ticket #5782 (New Instantiation - Failure to instantiate EletricalEnergyStorage Libray) updated by
- The issue seems to be that the OF adds default arguments to record …
- 13:50 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- What are the needed flags to run this example? I'm trying with this …
- 13:38 Ticket #5779 (Backend - Enable/disable root finding) updated by
- I definitely support this request. In many cases you want to use a …
- 13:07 Ticket #5758 (Run-time - Add separate logging of global homotopy solver) updated by
- See PR #654.
- 12:41 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
-
Owner, Component changed
This doesn't look like a frontend issue, it looks more like a code … - 12:29 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) closed by
- fixed
- 12:28 Ticket #5763 (New Instantiation - Connections.isRoot statement outside equation results in instantiation ...) updated by
- Fixed in 6715c62. The issue was …
- 12:26 Ticket #5758 (Run-time - Add separate logging of global homotopy solver) updated by
- That's a good idea. I'd like to go a step further and introduce a …
- 12:07 Ticket #5774 (Code Generation - [CG] Records with one component have code generation issues) updated by
-
Cc changed
- 10:43 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) created by
- The new frontend wrongly generates max min and nominal values for …
- 09:45 Ticket #5780 (*unknown* - Meaning of version, milestone and version in trac tickets) updated by
-
Cc changed
Not having 1.14.1 was an oversight, I've added it to the dropdown list … - 09:21 Ticket #5726 (Third-Party Libraries - Categorize open-source libraries in OpenModelica for different uses) updated by
-
Description changed
Note:
See TracTimeline
for information about the timeline view.
