Timeline
2020-05-28:
- 20:37 Ticket #5991 (New Instantiation - NF cannot evaluate structural parameter during NFTyping.typeComponents) created by
- There are over 50 models in the Buildings library that fail for the …
- 20:35 Ticket #5987 (New Instantiation - Ragged arrays not yet supported by the NF) updated by
- Replying to casella: > I'm not sure I understand where …
- 20:33 Ticket #5990 (New Instantiation - NFScalarize.scalarizeVariable fails in Buildings example) created by
- Please check …
- 20:29 Ticket #5989 (New Instantiation - Issue with NF and evalSub in Buildings) created by
- Please check …
- 20:23 Ticket #5988 (New Instantiation - NF fails with no error message during NFTyping.typeComponents when ...) created by
- Please check …
- 20:21 Ticket #5987 (New Instantiation - Ragged arrays not yet supported by the NF) created by
- Please check …
- 20:11 Ticket #5906 (Code Generation - compilation error for curved bend) updated by
-
Owner changed
I guess @mahde930 could give some suggestions - 20:07 Ticket #5885 (New Instantiation - Sliced subscripts in Modelica.ComplexMath.sum fails at code generation) updated by
-
Priority, Milestone changed
Changed to blocker for 2.0.0, we should support the MSL completely. - 20:06 Ticket #5905 (OMEdit - Clean up large copy pasted code parts in OMEdit) updated by
- @atrosinenko, thanks for the analysis! According to your …
- 14:45 Ticket #5789 (OMEdit - OMEdit can't delete ssp components) updated by
-
Priority changed
- 14:39 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Replying to adeas31: > Anything specific you changed in …
- 14:29 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- > > > Greying out the simulate buttons when one is running would be …
- 14:08 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Anything specific you changed in setup window that is not preserved?
- 13:40 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- I mostly agree with comment:8 Regarding comment:9, I just made a test …
- 12:49 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Replying to casella: > Replying to timswait@…: …
- 12:45 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Replying to casella: > Replying to anonymous: …
- 12:17 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Replying to timswait@…: > Thank you for taking the time to …
- 12:16 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) reopened by
- Replying to timswait@…: > Also the simulation setup …
- 11:58 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Also the simulation setup options don't seem to stick if you change …
- 10:53 Ticket #5986 (OMEdit - Can't open wsl path from OMEdit under Windows) created by
- Under newer Windows 10 builds the Windows Subsystem for Linux (WSL) is …
- 10:32 Ticket #5969 (FMI - Export FMUs without sources) closed by
- fixed
- 10:04 Ticket #5969 (FMI - Export FMUs without sources) updated by
- This flag is now supported by OMEdit see 2a7b500/OpenModelica.
- 10:04 Ticket #3105 (FMI - Parameters and variables available in FMI) updated by
- Added the new filter options to OMEdit 2a7b500/OpenModelica.
- 09:58 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Thank you for taking the time to respond, I'm slowly getting to grips …
2020-05-27:
- 13:52 Ticket #5971 (OMSimulator - TLM pendulum example error) updated by
- Replying to phannebohm: > I proposed a fix in …
- 12:41 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- Replying to anonymous: > -It would make sense to make the …
- 12:25 Ticket #5920 (FMI - UnitDefinitions are missing in modelDescription.xml) closed by
- fixed
- 12:25 Ticket #5845 (FMI - FMU export not creating UnitDefinitions section in ModelDescription.xml) closed by
- fixed: Since this is a blocker ticket and we are close to the release date, I …
- 06:53 Ticket #5936 (Run-time - Simulation statistics) closed by
- fixed
2020-05-26:
- 19:14 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) updated by
- As an engineer trying Modelica for the first time (and the friend of …
- 18:29 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
- Replying to Hendrik Job <hendrikjob98@…>: > Replying to …
- 18:03 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
- Also the airchange evaluation didn't work, because, the door and the …
- 17:51 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
-
I fixed the
zMeanissue by adding azLevelvalue to the … - 15:49 Ticket #5970 (New Instantiation - Compile error on array of models with expandable connector) closed by
- fixed: Fixed in bca2d571.
- 13:15 Ticket #5980 (MetaModelica - OMC Spins forever if components are mutally recursive) closed by
- fixed: Fixed in …
- 12:18 Ticket #5920 (FMI - UnitDefinitions are missing in modelDescription.xml) updated by
- This is now fixed with this PR …
- 12:17 Ticket #5845 (FMI - FMU export not creating UnitDefinitions section in ModelDescription.xml) updated by
- This is now fixed with this PR …
- 08:43 Ticket #5985 (OMEdit - Code foldings for ssp source code) created by
- Code folding for xml nodes would help a lot, especially because text …
- 08:42 Ticket #5984 (OMEdit - OMSimulator text editing enhancements) created by
- * It would be good to indicate if a text view is in fact not editable. …
- 06:26 Ticket #5983 (FMI - Cleanup black box FMUs) created by
- FMUs contain log files and additional information for the …
- 00:04 Ticket #5982 (OMEdit - Support macros text strings within diagrams) created by
- The Modelica Specification, …
2020-05-25:
- 21:49 Ticket #5960 (Initialization - Large scale electrical models) updated by
-
Status, Owner, Milestone changed
I briefly discussed this with Karim today. There could be some … - 21:48 Ticket #5980 (MetaModelica - OMC Spins forever if components are mutally recursive) updated by
- Replying to casella: > See the Modelica Specification, …
- 21:36 Ticket #5970 (New Instantiation - Compile error on array of models with expandable connector) updated by
-
Status, Owner, Component, Milestone changed
@perost, the model flattened with the NF reads […] It seems to me … - 21:31 Ticket #5951 (Build Environment - OMC build time has increased) closed by
- fixed: Given @adrpo's report, I would tentatively close this ticket. Feel …
- 21:29 Ticket #5939 (*unknown* - variableFilter sometimes includes aliases of selected variables) updated by
- @christopher, #3533 was declared invalid 5 years ago. Are you sure the …
- 21:26 Ticket #5918 (Cpp Run-time - Size of Cpp FMU increased by more than 300% with OMSI) updated by
- @rfranke, from comment:9 it looks the issue you raised in this ticket …
- 21:23 Ticket #5980 (MetaModelica - OMC Spins forever if components are mutally recursive) updated by
- See the Modelica Specification, …
- 21:10 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) updated by
- BTW, I think the behaviour should be as follows: - when the parameter …
- 21:03 Ticket #5981 (OMEdit - OMEdit does not handle correctly modified inherited parameters) updated by
- See related #5788
- 21:02 Ticket #5788 (OMEdit - Cannot input parameters redefined in child models using OMEdit) updated by
- See #5981, which is probably closely related
- 21:01 Ticket #5980 (MetaModelica - OMC Spins forever if components are mutally recursive) updated by
-
Should omc detect a circular dependency and fail, or actually try to … - 21:01 Ticket #5981 (OMEdit - OMEdit does not handle correctly modified inherited parameters) created by
-
Please check the attached test package. Open the model
Sand … - 19:56 Ticket #5788 (OMEdit - Cannot input parameters redefined in child models using OMEdit) updated by
-
Milestone, Summary changed
Replying to adeas31: > These are two differentUStart… - 18:48 Ticket #5788 (OMEdit - Cannot input parameters redefined in child models using OMEdit) updated by
-
Description changed
- 18:46 Ticket #5978 (New Instantiation - Unable to pass argument to nested function defined as argument) closed by
-
invalid:
FunctionPass3.Functions.InnerFun()is a function call, which fails … - 18:10 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) updated by
-
Milestone, Summary changed
Ok, then I think it should really be fixed in 1.16.0. - 18:08 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) closed by
- fixed: The original problem was solved, now I can get this to run correctly …
- 18:03 Ticket #5979 (OMEdit - OMEdit dies when checking model with mutually recursive constants) updated by
-
Priority, Status, Component, Owner, Milestone changed
I understand the check option doesn't really work well on packages, … - 18:03 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) updated by
- It's also a regression. At least my 1.14-dev234 version (which I still …
- 17:59 Ticket #5769 (*unknown* - Initialization of HeatingSystem model broken because of questionable ...) updated by
- Great!
- 17:58 Ticket #5978 (New Instantiation - Unable to pass argument to nested function defined as argument) updated by
-
Owner, Component, Milestone changed
To be honest, I never fully understood the semantics of parameters in … - 17:56 Ticket #5971 (OMSimulator - TLM pendulum example error) updated by
-
Priority, Milestone changed
- 17:55 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) updated by
-
Priority, Milestone, Summary changed
Thank you @ceraolo! I thought I had already opened a ticket on this … - 17:50 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
-
Summary changed
- 17:49 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
- You may also turn on LOG_NLS or LOG_NLS_V and inspect the initial …
- 17:45 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
- In my experience relying on any Modelica tool to pick up initial …
- 17:43 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) closed by
- fixed: Doing this properly is not completely trivial. If we disable the …
- 16:23 Ticket #5980 (MetaModelica - OMC Spins forever if components are mutally recursive) created by
- Code like: […] Results in the omc spinning forever if it is used …
- 16:08 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- How did the tests go? Are there still regressions? I lost the trace, …
- 15:19 Ticket #5979 (OMEdit - OMEdit dies when checking model with mutually recursive constants) updated by
-
Cc changed
- 15:13 Ticket #5979 (OMEdit - OMEdit dies when checking model with mutually recursive constants) created by
- Consider the following model […] I am on Windows using …
- 15:11 Ticket #5769 (*unknown* - Initialization of HeatingSystem model broken because of questionable ...) closed by
- fixed: I tested this with OMCompiler v1.16.0-dev.400+gfc2c716261 and …
- 15:05 Ticket #5978 (New Instantiation - Unable to pass argument to nested function defined as argument) updated by
- P.S. it suffices to declare …
- 14:58 Ticket #5978 (New Instantiation - Unable to pass argument to nested function defined as argument) created by
- I have an outer function that have: - a Real argument - a function …
- 14:33 Ticket #5977 (*unknown* - Schedule for 1.16.0 release) updated by
-
Description changed
- 14:05 Ticket #5977 (*unknown* - Schedule for 1.16.0 release) created by
- After today's discussion at the devmeeting, we agreed on this …
- 13:02 Ticket #5968 (MetaModelica - Support for self recursive constants in Uniontypes) closed by
- fixed: Fixed in https://github.com/OpenModelica/OpenModelica/pull/890
- 10:59 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
- When i compile your model i get additional warnings at the bottom. …
- 08:42 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) updated by
-
Cc, Owner, Component, Milestone changed
2020-05-24:
- 01:47 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) updated by
-
Description, Summary changed
2020-05-23:
- 19:36 Ticket #5971 (OMSimulator - TLM pendulum example error) updated by
- I have installed it again in C:/, but I get the following error also, …
- 18:11 Ticket #5971 (OMSimulator - TLM pendulum example error) updated by
- From your TLM_error2.png it looks like the space in the path …
- 17:26 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) created by
- Consider the following model: […] From the GUI it seems possible …
- 17:05 Ticket #5975 (Run-time - Numerical problems with initialization of thermofluid model in ...) created by
- Hi, I'm new to OM. So I hope, that this issue can be solve by more …
- 11:39 Ticket #5974 (OMEdit - OMEdit allows a second simulation to run before first one has quit ...) created by
- If you click on the Simulate button while a simulation is already …
2020-05-22:
- 17:47 Ticket #5973 (FMI - Make it possible to enable custom set of runtime flags in FMUs) created by
- It is important to be able to customize runtime flags for FMUs. This …
- 16:28 Ticket #5972 (OMEdit - Bad display of diagrams in plot perspective when inheritance is involved) updated by
-
Status changed
- 16:26 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
-
I also noticed that few
*.homotopy.csvfiles are generated in wrong … - 16:25 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
-
Cc changed
I debugged this and it seems that it crashes at … - 15:39 Ticket #5972 (OMEdit - Bad display of diagrams in plot perspective when inheritance is involved) updated by
-
Description changed
- 15:38 Ticket #5972 (OMEdit - Bad display of diagrams in plot perspective when inheritance is involved) created by
- Consider the attached Diagviewissue.mo Display of M is totally wrong …
- 12:43 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
- @AnHeuermann can you share the mos script?
- 12:35 Ticket #5788 (OMEdit - Cannot input parameters redefined in child models using OMEdit) updated by
- > the parameter UStart shows up in two separate tabs (General and …
- 11:49 Ticket #5971 (OMSimulator - TLM pendulum example error) created by
- When executing the pendulum example as in …
2020-05-21:
- 20:38 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) closed by
- fixed
- 19:53 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) closed by
- fixed: Fixe with PR: https://github.com/OpenModelica/OpenModelica/pull/881
- 18:22 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- More fixes on Windows: …
- 15:17 Ticket #5960 (Initialization - Large scale electrical models) updated by
- I attach the file. In the library LSPVPP you can find different …
- 07:58 Ticket #5970 (New Instantiation - Compile error on array of models with expandable connector) created by
- Hi, all I want to run array of model, each model has Bus as …
Note:
See TracTimeline
for information about the timeline view.
