Timeline
2020-08-01:
- 17:16 Ticket #5590 (Backend - Bad dynamic state selection leads to singular initialization) updated by
- I analyzed the problem and was able to produce the desired state …
- 08:07 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- Next test has been run, and all 6 cases with this error message now …
2020-07-31:
- 23:18 Ticket #5669 (NF API - OMEdit crashes expanding Modelica.Media.Air) updated by
- Is this a duplicate to #5575 ? Ulrich
- 22:50 Ticket #6080 (FMI - Changing parameters of a model via Python) updated by
-
Milestone changed
- 22:49 Ticket #6026 (OMEdit - OM Plotting doesn't manage the option to split two variables) updated by
-
Status, Owner, Component, Milestone changed
- 17:23 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- Thank @Karim for the analysis and the quick fix! I guess this issue …
- 13:46 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- Replying to matthis.thorade@…: > Whether the …
- 13:35 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) closed by
- fixed: I had to adapt some structures such that the known variables are …
- 12:18 Ticket #6080 (FMI - Changing parameters of a model via Python) created by
- I created a minimal example (DC-Voltage, Load) in OpenModelica. …
- 10:24 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
- Dear Adrian, thank you for your clarifications. It seems that from …
- 07:15 Ticket #6026 (OMEdit - OM Plotting doesn't manage the option to split two variables) updated by
- Is there anyone who's taking care for this enhancement?
2020-07-30:
- 16:53 Ticket #6079 (Backend - Conflict between modelica_synchronous and pulse source) updated by
-
Cc, Owner, Component, Milestone changed
- 16:51 Ticket #6079 (Backend - Conflict between modelica_synchronous and pulse source) updated by
- I tried to run the test case in Dymola. This is the outcome […] I …
- 14:53 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- I implemented two new rules for exponential differentiation with …
- 13:01 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- Thanks for looking into this! Here, the coefficients and exponents are …
- 12:33 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- I dug deeper into this and found out that the actual call for this …
- 11:34 Ticket #6079 (Backend - Conflict between modelica_synchronous and pulse source) created by
- Hi, I implemented a wrapping counter using the modelica_synchronous …
- 11:20 Ticket #6078 (*unknown* - OPENMODELICALIBRARY and MODELICAPATH ignored?) updated by
-
Status, Owner changed
@sjoelund.se, could you please help @john.pye with this? Thanks! - 11:18 Ticket #6077 (Run-time - OM 1.16 fails to read XML parameters from input file) updated by
- I'm not sure I understand all the details of your Python code, but …
- 11:12 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
- For example, this is how Dymola complains on the first model, and we …
- 11:11 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
- The problem is not from external object, is the fact that you're using …
- 09:53 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
- Well, I don't see which rule this code would be breaking. Luckily, …
- 09:24 Ticket #6078 (*unknown* - OPENMODELICALIBRARY and MODELICAPATH ignored?) created by
- Hi there, With SolarTherm (https://github.com/SolarTherm/SolarTherm), …
- 09:11 Ticket #6077 (Run-time - OM 1.16 fails to read XML parameters from input file) created by
- Hi there, In SolarTherm (https://github.com/SolarTherm/SolarTherm), …
- 00:08 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
-
Status, Owner changed
- 00:00 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
- Replying to adrpo: > The problem seems to be the parameter …
2020-07-29:
- 20:10 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) updated by
- The problem seems to be the parameter external object used directly in …
- 17:33 Ticket #6075 (Frontend - Counting Boolean Vectors with MSL function does not work with old frontend) closed by
- worksforme: @arun3688, even though the new front-end is still not the default with …
- 17:28 Ticket #6070 (Code Generation - Incorrect warning during compilation of model with external component) updated by
-
Status, Cc, Priority, Version, Milestone, Owner changed
@adrpo will look at this ASAP. Please come back to us mid-September … - 17:20 Ticket #6076 (Code Generation - The enclosed code translates, Test2 can be instantiated, but ...) created by
- Dear all, trying to encapsulate an external object class …
- 09:13 Ticket #6075 (Frontend - Counting Boolean Vectors with MSL function does not work with old frontend) created by
- Counting the number of true values in a boolean vector using the MSL …
- 09:13 Ticket #6072 (OMEdit - Non-structural parameters should not be evaluated by default) updated by
- > Tools | Options, there are three buttons on the bottom right, the …
- 07:28 Ticket #6070 (Code Generation - Incorrect warning during compilation of model with external component) updated by
- I have just tested compilation with version 1.16.0-dev.03: same …
2020-07-28:
- 23:10 Ticket #4247 (Run-time - Implement state-of-the-art high-order variable-step-size explicit ...) closed by
- fixed: We have now integrated the CVODE solver, so I guess we can finally …
- 23:09 Ticket #5977 (*unknown* - Schedule for 1.16.0 release) updated by
- All critical issues resolved as of today, except replaceable bugs …
- 22:06 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- In the meantime, a …
- 19:20 Ticket #6072 (OMEdit - Non-structural parameters should not be evaluated by default) updated by
- Replying to ceraolo: > Sorry for opening this ticket. …
- 18:28 Ticket #6072 (OMEdit - Non-structural parameters should not be evaluated by default) updated by
- Replying to casella: > We had a long discussion about this …
- 17:41 Ticket #6074 (New Instantiation - The NF should completely eliminate Evaluate = true parameters from ...) created by
- @perost, please check out the FEMBody package from …
- 14:00 Ticket #6072 (OMEdit - Non-structural parameters should not be evaluated by default) closed by
- worksforme: We had a long discussion about this in the past, see #5132 and #5436. …
- 13:04 Ticket #6072 (OMEdit - Non-structural parameters should not be evaluated by default) updated by
- I remember being in a lecture by @bachmann when this behavior …
- 13:00 Ticket #6073 (OMEdit - [OMEdit] Add support for pre/post scripts to simulate) created by
- See: …
- 11:29 Ticket #6072 (OMEdit - Non-structural parameters should not be evaluated by default) created by
- If I'm not mistaken (it is not easy to be sure of this) "Evaluate all …
- 11:09 Ticket #6071 (FMI - Don't show parameter edits in FMU created with "Evaluate all parameters") updated by
-
Cc changed
- 10:03 Ticket #6071 (FMI - Don't show parameter edits in FMU created with "Evaluate all parameters") updated by
-
Priority, Status, Component, Owner changed
@lochel, I think this is an important fix for consistency. I guess it … - 09:55 Ticket #6071 (FMI - Don't show parameter edits in FMU created with "Evaluate all parameters") updated by
-
Description changed
- 09:54 Ticket #6071 (FMI - Don't show parameter edits in FMU created with "Evaluate all parameters") updated by
-
Summary changed
- 09:50 Ticket #6071 (FMI - Don't show parameter edits in FMU created with "Evaluate all parameters") created by
- When we create an FMU while "Evaluate all parameters" is active, …
- 09:15 Ticket #6070 (Code Generation - Incorrect warning during compilation of model with external component) updated by
- Sorry, my mistake, dev.03 is fine
- 08:33 Ticket #6070 (Code Generation - Incorrect warning during compilation of model with external component) updated by
- Good morning! 1. Please confirm I have to test with 1.16.0-dev.01: I …
2020-07-27:
- 20:40 Ticket #6070 (Code Generation - Incorrect warning during compilation of model with external component) updated by
- Two comments - would you mind retrying with the stable 1.16.0-dev.01 …
- 17:23 Ticket #6070 (Code Generation - Incorrect warning during compilation of model with external component) created by
- Dear all, during compilation of a model using an external library …
- 16:27 Ticket #6069 (OMEdit - When clicking /Modelica/Media/Air on OMEdit ,OMEdit freezes.) closed by
- duplicate: Duplicate of: #5669. This is because we use the new front-end for the …
- 16:19 Ticket #6069 (OMEdit - When clicking /Modelica/Media/Air on OMEdit ,OMEdit freezes.) created by
- I am using OpenModelica v.1.14.1 for Windows64. When clicking …
- 13:11 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
-
Cc changed
- 13:05 Ticket #6060 (OMEdit - OMEdit crashes when changing connector names) updated by
-
Cc changed
Excellent! Thanks @ceraolo for nailing down the right test case and to … - 13:00 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) updated by
- Replying to adeas31: > But that one is not a bitmap. …
- 12:56 Ticket #5328 (Run-time - ODE solver behaves erratically in two MultiBody examples with dynamic ...) updated by
- @Karim, maybe you want to have a second look at this. In both cases, …
- 12:49 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) updated by
- subscribing
- 12:40 Ticket #6068 (Backend - Illegitimate transformation during translation of HelmholtzMedia function) created by
- As discussed [https://github.com/thorade/HelmholtzMedia/issues/34 …
- 12:28 Ticket #6060 (OMEdit - OMEdit crashes when changing connector names) updated by
-
Milestone changed
- 12:11 Ticket #5328 (Run-time - ODE solver behaves erratically in two MultiBody examples with dynamic ...) updated by
-
Summary changed
- 09:56 Ticket #6060 (OMEdit - OMEdit crashes when changing connector names) closed by
- fixed: Fixed in c370c60/OpenModelica. @ceraolo thanks for …
- 09:32 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) updated by
- I think Francesco's comment makes much sense. The use of a special …
- 08:43 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) updated by
- But that one is not a bitmap. Anyways what you are saying will change …
- 08:13 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) updated by
- BTW, I'm not sure if the Specification is 100% good with this thing. …
- 07:21 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) updated by
- This might be related to #5878. I am guessing your bitmaps were …
2020-07-26:
- 23:16 Ticket #6067 (New Instantiation - Evaluate = true should be applied to entire parameter records) updated by
-
Description changed
- 23:16 Ticket #6067 (New Instantiation - Evaluate = true should be applied to entire parameter records) updated by
-
Description changed
- 23:15 Ticket #6067 (New Instantiation - Evaluate = true should be applied to entire parameter records) updated by
-
Description changed
- 23:14 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) updated by
-
Milestone changed
Can you please attach a minimal working example to reproduce the … - 23:12 Ticket #3329 (Code Generation - C code generation error in flexible multibody) closed by
- fixed: After a few years the problem is almost solved, see #6067 and …
- 22:20 Ticket #6067 (New Instantiation - Evaluate = true should be applied to entire parameter records) created by
- Please consider the following test case […] When I flatten model …
- 09:13 Ticket #6066 (OMEdit - OpenModelica bitmap wrong way around) created by
- Hello, I changed my OpenModelica (OMEdit) to the newest version. Now …
2020-07-25:
- 16:08 Ticket #6065 (Package Manager - Couldn't resolve host name) updated by
- Sounds good. But I think we should make sure that OpenModelica can …
- 08:04 Ticket #5963 (Cpp Run-time - Put the old C++ runtime back into OMC 1.16.0) updated by
-
Description changed
Note:
See TracTimeline
for information about the timeline view.
