Timeline
2020-09-25:
- 17:33 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
- There are also many red error messages showing up in the Message …
- 17:31 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
- I tested the results of the PR today with the attached test case. Now …
- 17:23 Ticket #5749 (Build Environment - Segmentation fault during omc compilation with gcc (v1.14.0)) updated by
- @florentine, we are going to release 1.16.0-beta.01 next week. Could …
- 17:22 Ticket #6137 (Backend - Remove unit checking from the backend) updated by
- Replying to perost: > Cc:ing lochel, @username doesn't …
- 17:21 Ticket #5505 (*unknown* - Avoid file lists to be shown along with error messages) updated by
- I agree that messages showing me 127 equations and 128 variables have …
- 12:40 Ticket #4288 (Interactive Environment - A submodel is shown in a model diagram while its pathname is wrong and ...) updated by
- Support for encapsulated in the NF has now been implemented in …
- 10:13 Ticket #6138 (OMEdit - OMEdit gives an error when trying to set parameter or variable ...) updated by
-
Summary changed
- 10:12 Ticket #6138 (OMEdit - OMEdit gives an error when trying to set parameter or variable ...) updated by
- UPDATE: the problem disappears if the replaceable support is deactivated…
- 09:34 Ticket #6138 (OMEdit - OMEdit gives an error when trying to set parameter or variable ...) created by
- Step to reproduce the error: 1) open the attached package …
- 08:58 Ticket #5749 (Build Environment - Segmentation fault during omc compilation with gcc (v1.14.0)) updated by
- Hi, This issue is still there in 1.14.2. Regards
- 08:55 Ticket #6137 (Backend - Remove unit checking from the backend) updated by
-
Cc changed
Cc:ing lochel, @username doesn't work here. - 05:37 Ticket #5505 (*unknown* - Avoid file lists to be shown along with error messages) updated by
-
Description changed
- 05:35 Ticket #5505 (*unknown* - Avoid file lists to be shown along with error messages) updated by
-
Description changed
- 05:32 Ticket #5653 (OMEdit - Improve moving through arrow keys) closed by
- wontfix: Ticket now obsolete because of fixing of #5620
2020-09-24:
- 19:44 Ticket #4288 (Interactive Environment - A submodel is shown in a model diagram while its pathname is wrong and ...) updated by
- Replying to casella: > @perost, I retried this with the …
- 17:22 Ticket #4288 (Interactive Environment - A submodel is shown in a model diagram while its pathname is wrong and ...) updated by
- @perost, I retried this with the latest nightly, and the model is …
- 17:14 Ticket #4469 (OMEdit - OMEdit does not update diagrams of derived classes) updated by
-
Summary changed
- 14:35 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- There are ways to make this faster, we will do them for 1.17.
- 14:13 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- Replying to ceraolo: > I checked on my desktop. > A …
- 13:44 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) updated by
- Thanks Adeel!
- 12:37 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) closed by
- fixed: Fixed in 161074e/OpenModelica.
- 08:07 Ticket #4138 (New Instantiation - New FrontEnd) updated by
- Status update as of 24 Sep 2020. The new front end development …
- 07:57 Ticket #6137 (Backend - Remove unit checking from the backend) created by
- The unit checking feature was first implemented as a backend module. …
- 07:46 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- I checked on my desktop. A five-keystroke sequence took 2.8s. On a …
- 07:22 Ticket #6135 (Run-time - Support of Visual Studio in OMEdit on Windows) updated by
-
Status changed
- 01:45 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
- Proper models now (actually subtypeof) with: …
- 01:44 Ticket #6013 (Interactive Environment - choicesAllMatching doesn't work with relative paths) updated by
- Should be fixed with: …
- 00:45 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) closed by
- fixed
- 00:34 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) updated by
- Replying to adeas31: > Nothing hangs. Well, that depends …
- 00:20 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- Thank you Adrian! I hope the PR passes the test, we'll try it tomorrow.
2020-09-23:
- 23:41 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- This should properly fix it: …
- 20:28 Ticket #6136 (Build Environment - Mac OMEdit fails to build) created by
- I just tried to upgrade openmodelica-devel from …
- 15:39 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) updated by
- The simulation executable exits before making a the tcp connection to …
- 15:02 Ticket #6126 (New Instantiation - Error while compiling wind turbine model from PowerSystems library) updated by
-
Status, Owner changed
- 14:15 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) updated by
- Nothing hangs. Its just that OMEdit don't show anything. The …
- 10:57 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) updated by
-
Status changed
I will check what's wrong. - 09:35 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) updated by
- Models do not hang. They just exit successfully without generating a …
- 08:59 Ticket #6107 (OMEdit - OMEdit adds invalid annotation) reopened by
- We now have the problem that models created before this fix now hang …
- 08:54 Ticket #6135 (Run-time - Support of Visual Studio in OMEdit on Windows) created by
- The VS compiler is extremely fast, because it is specifically …
- 08:02 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) updated by
- Do you have an example where current "discrete variables" and …
- 07:59 Ticket #6134 (New Instantiation - OMEdit fails to simulate a model that should run according to library ...) closed by
- fixed: Thank you for the fix! It works with today's nightly build :)
- 06:54 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
-
Cc, Component changed
I found out what the problem is. Moving the API for updateComponent to …
2020-09-22:
- 15:57 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) updated by
- Replying to casella: > @rfranke, please check and close …
- 15:54 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) updated by
- @rfranke, please check and close the ticket at your earlier convenience.
- 15:45 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) updated by
- I understand from the specification that the way discrete states and …
- 15:42 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) updated by
-
Milestone changed
The fix will be available in 1.16.0 - 14:05 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) updated by
- Replying to perost: > Ok, seems like the scripting API …
- 12:56 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) updated by
- Sorry for having messed up the example with a continuous-time state in …
- 12:40 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
Milestone changed
- 12:39 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
Milestone changed
@adrpo has a fix in the pipeline to avoid this issue; the idea is to … - 11:43 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) closed by
- fixed: The PR is merged into the master. There are probably still some fmi …
- 11:43 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) updated by
- Replying to rfranke: > No error from OMEdit. Just the …
- 11:41 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- https://github.com/OpenModelica/OpenModelica/pull/6759
- 11:25 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) updated by
- No error from OMEdit. Just the notification: […] (besides a dialog …
- 11:10 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) updated by
-
When I instantiate the model using
omcon the command line it just … - 10:55 Ticket #6134 (New Instantiation - OMEdit fails to simulate a model that should run according to library ...) updated by
- Should be fixed in …
- 10:49 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- I already did the modifications, will push it in asap.
- 10:47 Ticket #5620 (Interactive Environment - Moving diagrams in NF too slow) updated by
- @adrpo reports: Currently we go through all the equations and for …
- 09:45 Ticket #6134 (New Instantiation - OMEdit fails to simulate a model that should run according to library ...) updated by
-
Status, Owner, Component changed
OMEdit has the new front-end on by default. For the newInst results … - 09:41 Ticket #6134 (New Instantiation - OMEdit fails to simulate a model that should run according to library ...) created by
-
The model
PowerSystems.Examples.Introductory.SimulationFixedInitial… - 09:36 Ticket #6133 (OMEdit - OMEdit doesn't load a library if just the version is different; no ...) created by
- The below model is a duplicate of …
2020-09-21:
- 23:57 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) updated by
- Replying to Karim.Abdelhak: > Okay i looked a bit closer …
- 20:56 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) updated by
- Okay i looked a bit closer and i now understand that your model also …
- 20:48 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) updated by
- Well that is not how a discrete state is defined... A discrete state …
- 19:05 Ticket #5942 (OMEdit - OMEdit log files are always put in system default temp directory) updated by
-
Priority, Milestone changed
- 19:04 Ticket #6131 (OMEdit - Log files are not saved to the customized temp directory) closed by
- duplicate: Ops. Well, it would be good to get this fixed, every time I need to …
- 19:02 Ticket #6130 (FMI - Support for FMI for Co-Simulation (2.0 Standard)) updated by
- @lochel, is OMSimulator only working with ModelExchange FMUs?
- 19:00 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
- Replying to adrpo: > Why partial packages cannot be used? …
- 18:57 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
- Sorry, I forgot the attachment
- 18:39 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
- Well, I didn't read well comment 5. Forget about comment 7.
- 18:33 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
- Replying to casella: > @adeas31, as I see it, we are not …
- 17:34 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
-
Summary changed
- 17:23 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
- @adeas31, as I see it, we are not displaying the units on the axis, …
- 16:48 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
- OK
- 16:43 Ticket #6132 (Backend - backenddaeinfo states wrong number if discrete states) created by
-
Consider the following model with one discrete state
x: […] … - 14:38 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) updated by
- See PR https://github.com/OpenModelica/OpenModelica/pull/6757
- 13:41 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) updated by
- I can add a try-catch block to all fmi2 functions. This would look …
- 13:32 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
- If the technique indicated in this ticket is implemented in the right …
- 12:42 Ticket #5447 (OMEdit - Automatically pick the right prefix for units in OMEdit plots) updated by
- It should also be much easier to change the units of a specific curve. …
- 12:21 Ticket #6131 (OMEdit - Log files are not saved to the customized temp directory) updated by
- See #5942
- 12:19 Ticket #6131 (OMEdit - Log files are not saved to the customized temp directory) created by
- I changed the temp directory of OMEdit to D:\temp\OMedit. …
- 11:26 Ticket #6130 (FMI - Support for FMI for Co-Simulation (2.0 Standard)) updated by
- Thanks, Lochel! I was exactly referring to the link that you …
- 11:23 Ticket #6130 (FMI - Support for FMI for Co-Simulation (2.0 Standard)) updated by
- I am particularly looking at a use case where I am importing an FMI …
- 11:21 Ticket #6130 (FMI - Support for FMI for Co-Simulation (2.0 Standard)) updated by
- Here are some pointers to our user's guide: FMI export: …
- 11:19 Ticket #6130 (FMI - Support for FMI for Co-Simulation (2.0 Standard)) updated by
- There is support of FMI for Co-simulation. We provide both import and …
- 11:09 Ticket #6130 (FMI - Support for FMI for Co-Simulation (2.0 Standard)) created by
- Hi there, I was wondering, when support for FMI Import/Export for …
- 10:36 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
Description changed
- 10:35 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
-
Status changed
Why partial packages cannot be used? Via extends they become non-partial. - 10:23 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
-
Cc changed
- 10:23 Ticket #6127 (OMEdit - Improve drop-down menu for replaceable class) updated by
-
Priority, Milestone changed
- 10:23 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) updated by
-
Priority changed
- 09:52 Ticket #6129 (Interactive Environment - choicesAllMatching doesn't return the appropriate class references) created by
- Please check the attached simple model, I just dragged a pressure …
- 09:50 Ticket #6128 (OMEdit - OMEdit deletes the redeclare clause when a parameter value is changed) created by
- Steps to reproduce the issue: 1) open the attached package …
- 09:09 Ticket #6013 (Interactive Environment - choicesAllMatching doesn't work with relative paths) updated by
- This issue is still unresolved after …
- 09:07 Ticket #6012 (OMEdit - Handle default choices for redeclare as default choices for parameters) updated by
-
Milestone changed
We can keep this for 1.17.0, since it also involves parameters. Please … - 09:05 Ticket #6127 (OMEdit - Improve drop-down menu for replaceable class) updated by
-
Cc changed
- 09:04 Ticket #6127 (OMEdit - Improve drop-down menu for replaceable class) created by
- Please consider the attached test package. Enable replaceable support, …
- 08:42 Ticket #6011 (OMEdit - OMEdit does not correctly add redeclare statements) closed by
- fixed: Checked this after …
- 08:36 Ticket #6126 (New Instantiation - Error while compiling wind turbine model from PowerSystems library) updated by
-
Priority, Owner, Milestone, Component, Summary changed
This is very likely the same issue as #5991. Good to have one more …
2020-09-20:
- 08:12 Ticket #6126 (New Instantiation - Error while compiling wind turbine model from PowerSystems library) created by
- I am getting this error messages while simulating wind turbine example …
2020-09-18:
- 11:19 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) updated by
- The jumpers are problematic for certain industrial customers: see …
- 11:03 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) updated by
- I prefer 3: Fix the FMU functions to set the jumpers to not be NULL, …
- 10:41 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) updated by
- There are two different approaches I could think off: 1. Change the …
- 10:31 Ticket #6125 (FMI - Don't throw / assert / abort inside FMUs) created by
- When an error occurs inside an OpenModelica FMU we should return the …
Note:
See TracTimeline
for information about the timeline view.
