Timeline
2020-07-05:
- 19:05 Ticket #6049 (Testing Framework - Add ModelicaTest 4.0.0 to the testsuite) updated by
-
Status, Owner changed
- 16:10 Ticket #6049 (Testing Framework - Add ModelicaTest 4.0.0 to the testsuite) created by
- 08:56 Ticket #5905 (OMEdit - Clean up large copy pasted code parts in OMEdit) updated by
- Unfortunately, I don't have strong understanding on performing this …
2020-07-04:
- 21:03 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Replying to ceraolo: > Yes, it IS NOT ok. At least …
- 20:59 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) updated by
- I tried this myself. I confirm that I can now see the diagram also in …
- 20:55 Ticket #6048 (Testing Framework - FMI testing of models without states behaves in a bizarre way) updated by
- Replying to Karim.Abdelhak: > Isn't this just the usual …
- 20:39 Ticket #5590 (Backend - Bad dynamic state selection leads to singular initialization) updated by
- Update, I just re-tried with the latest 1.16.0 nightly build. The good …
- 20:17 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Replying to casella: > @ceraolo, I just retried this …
- 20:07 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) reopened by
- Since there is more than just a suspect that there is some …
- 18:30 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- @ceraolo, I just retried this model with the latest 1.16.0 nightly …
- 17:50 Ticket #6048 (Testing Framework - FMI testing of models without states behaves in a bizarre way) updated by
- Isn't this just the usual multi thread problem? Some tests have to …
- 17:43 Ticket #6033 (Run-time - Add some documentation about the use of homotopy() for initialization) updated by
- @AnHeuermann, this was incorrectly assigned to @lochel. Can you please …
- 17:43 Ticket #6033 (Run-time - Add some documentation about the use of homotopy() for initialization) updated by
-
Status, Owner changed
- 17:38 Ticket #6048 (Testing Framework - FMI testing of models without states behaves in a bizarre way) created by
- Please check this …
- 16:38 Ticket #6046 (*unknown* - Support of N-dimensional arrays in readRealMatrix) updated by
- Replying to anton.soppelsa: > @casella: a pity that a …
- 10:48 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) updated by
- I've just tried. Got the diagram, but also an immediate crash. I sent …
2020-07-03:
- 19:49 Ticket #6046 (*unknown* - Support of N-dimensional arrays in readRealMatrix) updated by
- Thank you all for the clarifications. @perost: yes, I was speaking …
- 18:36 Ticket #6047 (New Instantiation - The NF incorrectly infers the variability of a function call in ...) created by
- Please check …
- 18:12 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
- Replying to AnHeuermann: > Mhhh... Yes `(A and B) or A …
- 18:02 Ticket #6043 (OMEdit - Library Browser missing View Documentation menu option) updated by
- Thank you for fixing the documentation. It would be nice if that …
- 11:14 Ticket #6046 (*unknown* - Support of N-dimensional arrays in readRealMatrix) updated by
- Replying to casella: > Replying to [ticket:6046 …
- 11:08 Ticket #6046 (*unknown* - Support of N-dimensional arrays in readRealMatrix) updated by
- Replying to anton.soppelsa: > I suspect that this could …
- 11:02 Ticket #6046 (*unknown* - Support of N-dimensional arrays in readRealMatrix) closed by
-
invalid: This is not an OpenModelica issue.
readRealMatrixis part of the … - 11:01 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
- I guess we need to fix that. Do you have any suggestions? Just add it …
- 11:00 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
- I'll look at it ASAP, sorry
- 10:58 Ticket #6044 (OMEdit - Formatted equation editor when editing models) updated by
- Please coordinate with @adeas31 (adeel.asghar@…)
- 10:56 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) closed by
- fixed: The display issue is fixed in e15e9e2/OpenModelica.
- 10:46 Ticket #6046 (*unknown* - Support of N-dimensional arrays in readRealMatrix) created by
- It seems that the function readRealMatrix does not support …
- 10:40 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) updated by
- I get the same behavior as reported by @casella.
- 10:39 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
- Replying to casella: > @adeas31, for the record, I …
- 10:18 Ticket #6040 (FMI - Output variables changing name in FMU) updated by
-
Priority changed
As mentioned in … - 10:14 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
-
I noticed that changing the causality of
handvfrom independent … - 07:50 Ticket #6043 (OMEdit - Library Browser missing View Documentation menu option) updated by
- The view documentation menu item was removed some time ago but the …
- 06:39 Ticket #6045 (New Instantiation - The NF rejects supposedly legal code involving algorithms and discrete ...) updated by
- Thanks for the analysis, i will have a look!
2020-07-02:
- 23:02 Ticket #6045 (New Instantiation - The NF rejects supposedly legal code involving algorithms and discrete ...) created by
- In #5836, checks were introduced to make sure that discrete variables …
- 20:27 Ticket #6044 (OMEdit - Formatted equation editor when editing models) updated by
- Yes, I'm interested, however I'm wondering if Qt supports a JS library …
- 19:21 Ticket #6044 (OMEdit - Formatted equation editor when editing models) updated by
- Would be nice to have. Unfortunately we have a lot of issues with much …
- 19:19 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) reopened by
- 16:32 Ticket #6044 (OMEdit - Formatted equation editor when editing models) created by
- Looking at equations with a monospace font on a single line is not …
- 15:22 Ticket #6043 (OMEdit - Library Browser missing View Documentation menu option) updated by
- Thanks!
- 15:14 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
-
Cc changed
Much better. Thanks! I still see 4 "System Message: ERROR/6" at the … - 12:36 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) closed by
- fixed
- 12:36 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
-
Status, Owner changed
- 09:11 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
- https://github.com/OpenModelica/OpenModelica/pull/6662 should fix this …
- 09:10 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
- The first one is supposed to be there for sure. It was even put there …
- 08:14 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
- Great, thanks!
- 08:14 Ticket #6043 (OMEdit - Library Browser missing View Documentation menu option) updated by
-
Status, Component, Priority, Version, Milestone, Owner changed
You are absolutely right, there is both a problem with OMEdit and with … - 07:46 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
- I'll see if I can improve it.
2020-07-01:
- 23:37 Ticket #6043 (OMEdit - Library Browser missing View Documentation menu option) created by
- The …
- 22:25 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) updated by
-
Priority, Status, Component, Owner, Milestone changed
Thank you, I wanted to report that but I always forgot. @adeas31, … - 19:42 Ticket #6042 (Documentation - OpenModelica Introduction Web Documentation has error messages in it) created by
- There are 7 red "ERROR:" text boxes in …
- 17:43 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) updated by
- Replying to casella: > I just tried this out. I confirm …
- 17:19 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- Replying to AnHeuermann: > We need to use CVODE for model …
- 17:18 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) updated by
- I just tried this out. I confirm that the diagram in the plotting …
- 17:08 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- Replying to AnHeuermann: > > Q1: Why is the dll so large …
- 16:59 Ticket #6039 (Run-time - Allow to change parameters before resimulating when -iif is used to ...) updated by
-
Cc changed
Replying to Karim.Abdelhak: > Is this the same as … - 14:58 Ticket #6040 (FMI - Output variables changing name in FMU) updated by
-
Status, Owner changed
I'll have a lock at it. It should be possible to have both: Expose … - 14:53 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- We need to use CVODE for model …
- 14:53 Ticket #6041 (FMI - Fix FMU dependencies with CVODE) created by
- FMUs exported with CVODE are missing some libraries in the binary …
- 13:56 Ticket #6032 (OMEdit - Bad display and Crash when viewing a diagram in plotting perspective) updated by
- @adeas can you see if you can replicate this (I mean you see something …
2020-06-30:
- 17:20 Ticket #6040 (FMI - Output variables changing name in FMU) updated by
-
And for structural reasons, i.e.
modelStructure. - 17:19 Ticket #6040 (FMI - Output variables changing name in FMU) updated by
- Usually we hide those internal variables. But in case of states we do …
- 15:16 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- > Q1: Why is the dll so large for such a small model? Probably due to …
- 15:15 Ticket #6040 (FMI - Output variables changing name in FMU) created by
- When declaring a variable as an output and generating a FMU the …
- 14:52 Ticket #5823 (FMI - Verification of FMI models has interpolation issues) updated by
-
Cc changed
- 14:30 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
- Replying to casella: > If I remove the first element of …
- 14:28 Ticket #6039 (Run-time - Allow to change parameters before resimulating when -iif is used to ...) updated by
-
Is this the same as
-overrideFile? And if not, what is the … - 14:19 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- Replying to AnHeuermann: > More problems: > - I had to …
- 12:13 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- More problems: - I had to reopen #5367 - The binary files are to …
- 11:27 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
- BTW, this model works with the C runtime, you can check if it also …
- 11:22 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
- I see two problems with this bouncing ball model. A) The first …
- 10:21 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) closed by
- fixed: @adeas31, the process flow of the MWE posted in this ticket is not of …
- 10:18 Ticket #5824 (Run-time - Import start values from existing simulations run with other tools) updated by
- See also #6039
- 10:18 Ticket #6039 (Run-time - Allow to change parameters before resimulating when -iif is used to ...) created by
- The …
- 09:42 Ticket #5367 (FMI - Generated FMU missing events in other tools) reopened by
- Testing a different version of Bouncing Ball revealed that the problem …
- 09:03 Ticket #6038 (Build Environment - Mac OMEdit fails to build) updated by
- Yes OMEdit set the include path for it. It has to be read from …
- 08:36 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
- Lets see it from the process flow point of view. Consider you don't …
- 07:35 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
- Regarding the position of table inputs in the OMEdit home directory, I …
- 05:58 Ticket #6038 (Build Environment - Mac OMEdit fails to build) updated by
-
Cc changed
This is OpenModelica 332aaeb OMEdit which is using OMSimulator 8995b12 …
2020-06-29:
- 23:28 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
-
Owner changed
- 23:27 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
- See PR #6654. …
- 22:50 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
-
@adeas31, for the record, I couldn't find any
translateModel()… - 22:31 Ticket #6022 (Code Generation - HeatingSytem runs on Windows, fails on Linux) updated by
- You may also consider using the new …
- 22:27 Ticket #6038 (Build Environment - Mac OMEdit fails to build) updated by
-
Priority, Milestone changed
@sjoelund.se, could you have a quick look? Is this likely to be a … - 22:24 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
-
Owner changed
- 20:47 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
- Replying to adeas31: > The …
- 19:18 Ticket #4774 (Cpp Run-time - Make Interactive Simulation (OPC UA server) work with Cpp runtime) updated by
- Hi, Did anyone find a straightforward method to run an interactive …
- 18:46 Ticket #6022 (Code Generation - HeatingSytem runs on Windows, fails on Linux) closed by
- fixed: Solution: Update to MSL 3.2.3 build 4 Reason was: Modelica Standard …
- 18:42 Ticket #6038 (Build Environment - Mac OMEdit fails to build) created by
- I have openmodelica-devel installed through Macports: …
- 18:37 Ticket #6029 (Testing Framework - Add new MSL 4.0.0 reference files to Jenkins for Cppruntime) updated by
- At 20:35, I see that two runs of LibraryTesting were successful, and …
- 18:31 Ticket #6036 (OMEdit - show/get parameter from submodules) closed by
- duplicate: If I understand correctly, this is a duplicate of #2891. We are …
- 17:02 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
- I think the whole thing was around #3788. Maybe there was an …
- 16:00 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
-
Cc changed
On a second thought I don't think it is a bug. You need to copy the … - 15:45 Ticket #6034 (Documentation - Briefly explain the compilation pipeline and the role of compilation ...) updated by
- Sure!
- 15:26 Ticket #6037 (FMI - FMI2.0 Co-simulation: Defining stop time in setupExperiment causes ...) updated by
- I was unable to attach the jar files that run the co-simulation. Email …
- 15:20 Ticket #6037 (FMI - FMI2.0 Co-simulation: Defining stop time in setupExperiment causes ...) created by
- Thank you for all the great work! I tried to make it easier to …
- 14:31 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
- Never mind. Found the error in my test script and have solved the …
- 13:49 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
- But I can't come up with a mos script to test this without OMEdit …
- 13:41 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
-
Status, Owner changed
Yes, it looks like it. I'm trying to fix it. I would like to have a … - 12:50 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
- Thanks so much for the helpful suggestions! :-) I can confirm that it …
- 11:22 Ticket #6035 (OMEdit - Initialization file not loaded from default directory in OMEdit) updated by
-
Cc changed
Maybe the runtime is ignoring the-inputPathflag. - 10:49 Ticket #6025 (Third-Party Libraries - Incompatible Modelica_DeviceDrivers version (2.0.0) in OpenModelica ...) updated by
- Thanks for the quick fix ! Flavien
- 10:42 Ticket #6029 (Testing Framework - Add new MSL 4.0.0 reference files to Jenkins for Cppruntime) updated by
- That was due to several issues. The last (I hope!) which was due to me …
- 10:25 Ticket #6036 (OMEdit - show/get parameter from submodules) created by
- Is it possible to load all parameters to a main model from a submodule …
- 08:23 Ticket #5867 (FMI - Implement fixed time step implicit Euler in FMI/CS) updated by
-
Component, Milestone changed
Note:
See TracTimeline
for information about the timeline view.
