Timeline
2021-03-23:
- 17:18 Ticket #6432 (New Instantiation - Variable not found in foriter loop scope) updated by
- oh sorry, I left the flag to "Enable old fronted" and I forgot to test …
- 15:08 Ticket #6432 (New Instantiation - Variable not found in foriter loop scope) closed by
- wontfix: The errors are caused by using the old frontend, though I can't …
- 14:56 Ticket #6400 (New Instantiation - Issue with algorithm and the NF in PNLib) updated by
- Very good, we have another library with 100% support in OpenModelica :)
- 14:55 Ticket #6433 (Backend - Start values with fixed=false not appearing in NLS) updated by
-
Status, Owner, Component, Milestone changed
It looks like we are not considering start attributs when determining … - 14:53 Ticket #6432 (New Instantiation - Variable not found in foriter loop scope) updated by
-
Owner, Component, Milestone changed
- 14:45 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- Of course, it will not allocate each element since listAppend already …
- 14:29 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- It's going to be the same with just listAppend :) […] Would …
- 13:01 Ticket #6400 (New Instantiation - Issue with algorithm and the NF in PNLib) closed by
- fixed
2021-03-22:
- 21:57 Ticket #6433 (Backend - Start values with fixed=false not appearing in NLS) created by
- As you can see in the model, the value of the parameter startA that is …
- 19:26 Ticket #6432 (New Instantiation - Variable not found in foriter loop scope) updated by
-
Version changed
- 19:25 Ticket #6432 (New Instantiation - Variable not found in foriter loop scope) created by
-
The following line (please look at the
r_shape[1:3, pt_sel + 1]… - 16:21 ReleaseNotes/1.18.0 created by
- 14:22 Ticket #6418 (Run-time - Segmentation fault in BRSL DirectionalValves models) updated by
-
Status, Owner changed
- 14:22 Ticket #6419 (Run-time - Too many events in BRSL PressureValves models) updated by
-
Milestone changed
- 14:21 Ticket #6418 (Run-time - Segmentation fault in BRSL DirectionalValves models) updated by
-
Milestone changed
- 14:15 Ticket #6409 (Run-time - Simulation is not stopped when an error happens) updated by
- Replying to AnHeuermann: > @Simone I wrote you an E-Mail …
- 14:10 Ticket #6409 (Run-time - Simulation is not stopped when an error happens) updated by
- @Simone I wrote you an E-Mail last week. I'll need an additional …
- 09:34 Ticket #6430 (*unknown* - Error -1073741819 at solving initiation (after complete compilation)) updated by
- Thank you for your replies. We are trying to find the missing dll and …
- 08:45 Ticket #6400 (New Instantiation - Issue with algorithm and the NF in PNLib) updated by
- My changes got merged into the PNlib and we should now reach 100% coverage.
2021-03-20:
- 19:27 Ticket #6207 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
- Replying to AnHeuermann: > Duplicate of #6199? I also …
- 19:26 Ticket #6207 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
- Replying to Karim.Abdelhak: > I have a strong feeling that …
- 19:21 Ticket #6408 (*unknown* - Wrong start values for NLS with homotopy) updated by
-
Status, Owner changed
- 19:20 Ticket #6199 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
- @Karim, I had a look at this output, but I am a bit confused about …
- 15:10 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- Seems to work perfectly fine, thanks adrian!
2021-03-19:
- 22:56 Ticket #6350 (OMEdit - OMEdit cannot handle simulations with more than 10000 variable comfortably) updated by
- @adeas31, I guess we have a related issue with the Transformational …
- 22:52 Ticket #6350 (OMEdit - OMEdit cannot handle simulations with more than 10000 variable comfortably) updated by
-
Cc changed
Replying to adeas31: > @casella I did some more debugging … - 20:38 Ticket #6430 (*unknown* - Error -1073741819 at solving initiation (after complete compilation)) updated by
- Thanks Per :)
- 14:23 Ticket #6350 (OMEdit - OMEdit cannot handle simulations with more than 10000 variable comfortably) updated by
-
@casella I did some more debugging and it was
model_info.jsonthat … - 12:08 Ticket #6430 (*unknown* - Error -1073741819 at solving initiation (after complete compilation)) updated by
- Replying to casella: > OK, we really need to do something …
- 08:54 Ticket #6267 (Backend - Avoid bad scalarization of parameter bindings) updated by
- I fixed some of it, but there seems to be something left: …
- 07:07 Ticket #5839 (OMEdit - Plotting curves with toggled sign) closed by
- fixed: This is exactly the behaviour I expected. I like it.
2021-03-18:
- 22:33 Ticket #6431 (New Instantiation - [NF] Crash in NFCeval.evalExp on model check) closed by
- fixed: The PR is now merged and ported to 1.17.
- 17:42 Ticket #6431 (New Instantiation - [NF] Crash in NFCeval.evalExp on model check) updated by
- @perost, can you port this to maintenance/v1.17?
- 17:13 Ticket #6406 (OMEdit - OMEdit GUI not working properly) updated by
- Great! Ready to release …
- 17:12 Ticket #6430 (*unknown* - Error -1073741819 at solving initiation (after complete compilation)) updated by
- OK, we really need to do something with these exit codes, see #6242. …
- 17:06 Ticket #6406 (OMEdit - OMEdit GUI not working properly) closed by
- fixed
- 15:26 Ticket #5839 (OMEdit - Plotting curves with toggled sign) updated by
-
See bba553f/OpenModelica.
Added
Toggle Signto context … - 15:22 Ticket #6431 (New Instantiation - [NF] Crash in NFCeval.evalExp on model check) updated by
- Fixed in [https://github.com/OpenModelica/OpenModelica/pull/7313 PR …
- 15:01 Ticket #6406 (OMEdit - OMEdit GUI not working properly) updated by
- PR: https://github.com/OpenModelica/OpenModelica/pull/7312 for …
- 14:54 Ticket #6406 (OMEdit - OMEdit GUI not working properly) updated by
- Will port the fixes to 1.17 and close this.
- 14:49 Ticket #6431 (New Instantiation - [NF] Crash in NFCeval.evalExp on model check) created by
- Check model RewersePackage.Test from: …
- 10:59 Ticket #6430 (*unknown* - Error -1073741819 at solving initiation (after complete compilation)) created by
- Hi, We encounter a stranger error called -1073741819 on Windows x64. …
- 00:49 Ticket #6406 (OMEdit - OMEdit GUI not working properly) updated by
- PR: https://github.com/OpenModelica/OpenModelica/pull/7310 should fix …
- 00:41 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) closed by
- fixed: PRs merged in.
- 00:38 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- @AnHeuermann, I loaded the simulation results of the three Buildings …
- 00:32 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- @AnHeuermann, please check the attached …
- 00:24 Ticket #6198 (Backend - Index reduction issue in Buildings: the backend tries to differentiate ...) updated by
- After PR 7292 …
2021-03-17:
- 22:03 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- Not really, the idea is that whenever the log file exceeds 10 MB, …
- 21:41 Ticket #6406 (OMEdit - OMEdit GUI not working properly) updated by
- The PR: https://github.com/modelica/ModelicaStandardLibrary/pull/3779 …
- 21:12 Ticket #6406 (OMEdit - OMEdit GUI not working properly) updated by
- The problem seems to be in MSL 4.0.0 which has *BAD BAD BAD* …
- 20:26 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- Is OMEdit suppose to handle GB of log info via xmltcp?
- 20:25 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- Ok, this example generates *a lot* of info, I ran it like this: […] …
- 20:18 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- The executable consumes *A LOT* of memory, until I took my time to …
- 19:15 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- Sure, make a PR with it.
- 19:12 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- Since we are talking about performance here, does this save one …
- 15:17 Ticket #5839 (OMEdit - Plotting curves with toggled sign) updated by
- Ah, I see. However, at present the context menu has now just one item …
- 12:02 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
- OK, I'll just keep pushing until it passes then :)
- 12:00 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- Replying to sjoelund.se: > Then there is a problem with …
- 11:58 Ticket #5839 (OMEdit - Plotting curves with toggled sign) reopened by
- Sure. I will update the users guide.
- 11:57 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
- Yes the Qt tests fix is not ported to 1.17 so it fails sometimes. And …
- 11:56 Ticket #5839 (OMEdit - Plotting curves with toggled sign) updated by
- @adeas31, would you mind adding a short note about this in the …
- 11:53 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
- I re-ran the test, maybe it was just a glitch…
- 11:50 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
- See PR 7306 …
- 11:26 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- No, is actually like I said, you lose a lot of memory on this. In C …
- 11:21 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- Then we thought wrong, I thought it would be like one listAppend for …
- 11:07 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- No, it will only create 1 list: […] listAppend only allocates …
- 11:02 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- If you have 20 lists it will create 19 lists in the process via each …
- 10:59 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
- Is it really that bad? You need to create the full list anyway, and …
- 10:58 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- This is the C code for it, maybe is easier to understand how it works: …
- 10:55 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- list1 will be destroyed if not empty, if is empty then list2 will be …
- 10:50 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- Replying to adrpo: > it should be: {{{list1 := …
- 10:48 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- They cannot be empty, they will always have at least one entry. And …
- 10:44 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- It depends on how the lists in the UnorderedMap are created, if they …
- 10:41 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
-
it should be:
list1 := Dangerous.listAppendDestroy(list1,list2);… - 10:40 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) updated by
-
Cc, Version changed
- 10:40 Ticket #6429 (MetaModelica - [MM] Add listFlatten and listFlattenReverse in C for more performance) created by
- Currently List.flatten is implmeneted as: […] which has rather bad …
- 10:29 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- So the following libraries failed without error-message: […] Then …
- 10:12 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
-
Status, Owner changed
- 10:12 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
- Replying to adeas31: > No, why did you make this a …
- 09:59 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
- I basically have something like the following example (extremely …
- 09:59 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
-
Cc changed
No, why did you make this a blocker? We should close this with won't … - 09:53 Ticket #5839 (OMEdit - Plotting curves with toggled sign) updated by
- Sorry I forgot to write that. Right click is used to open a context …
- 09:52 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
-
Milestone changed
I'll move it to 1.16.5 to remember the maintenance goal - 09:45 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
-
Priority changed
- 09:45 Ticket #6427 (OMEdit - MSL 4.0 dialog is shown even if MSL 4.0 is not installed) updated by
-
Milestone changed
- 09:38 Ticket #6372 (Run-time - Asserts in conditional equations are not handled correctly) updated by
- After some discussion with @AnHeuermann, we thought that maybe …
- 07:02 Ticket #5839 (OMEdit - Plotting curves with toggled sign) updated by
- what's the way to toggle?
2021-03-16:
- 21:57 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) closed by
- fixed
- 21:27 Ticket #6413 (OMEdit - Open Terminal from OMEdit not working) updated by
- Thanks!
- 21:11 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) updated by
-
Cc changed
PR: https://github.com/OpenModelica/OpenModelica/pull/7303 Note that … - 20:57 Ticket #6413 (OMEdit - Open Terminal from OMEdit not working) closed by
- fixed: Done.
- 16:14 Ticket #6428 (MetaModelica - [MM] Add Dangerous.listAppendDestroy to the MetaModelica) created by
- 15:39 Ticket #6399 (OMPlot - OMPlot - Qt::yellow has no good contrast to white) closed by
- fixed: Fixed with [https://github.com/OpenModelica/OpenModelica/pull/7302 …
- 14:59 Ticket #5839 (OMEdit - Plotting curves with toggled sign) closed by
- fixed: Done in 97e53bb/OpenModelica.
- 10:50 Ticket #6331 (New Instantiation - [NF] Assigning parameters by external functions) updated by
- @spinhalf, we've just merged a loot of cool stuff (pun intended) on …
- 10:30 Ticket #6331 (New Instantiation - [NF] Assigning parameters by external functions) closed by
- fixed: Great, I'll consider this ticket fixed then.
- 09:47 Ticket #6331 (New Instantiation - [NF] Assigning parameters by external functions) updated by
- After all, I confirm that the actual trouble with "constant …
- 09:32 Ticket #6350 (OMEdit - OMEdit cannot handle simulations with more than 10000 variable comfortably) updated by
- Replying to ceraolo: > Maybe also #5177? Yes, the idea is …
Note:
See TracTimeline
for information about the timeline view.
