Timeline
2015-02-21:
- 09:05 Ticket #3169 (FMI - Under Mac OS X, FMU binaries directory should be darwin64, not ...) closed by
- fixed
- 09:05 Ticket #3169 (FMI - Under Mac OS X, FMU binaries directory should be darwin64, not ...) updated by
-
Status, Owner changed
- 08:48 Ticket #3084 (*unknown* - Under-determined linear system not solvable!) updated by
- Quick update: I just checked the issue under Debian Wheezy 64 bit with …
- 08:25 Ticket #3169 (FMI - Under Mac OS X, FMU binaries directory should be darwin64, not ...) updated by
- We changed from using uname to $host (in autoconf), and so the …
2015-02-20:
- 23:30 Ticket #3171 (FMI - BouncingBall modelDescription.xml is not valid for trivial reasons) created by
- The modelDescription.xml file produced by generating a FMU for …
- 22:41 Ticket #3170 (*unknown* - Under Mac OS X, BouncingBall FMU segfaults in fmuCheck) updated by
- I still can't get a stack trace, but here's how to build a debug …
- 21:21 Ticket #3061 (Installation program - Mac port install openmodelica-devel fails: syntax error near ...) updated by
- I was able to install using macports after completely removing …
- 20:15 Ticket #3169 (FMI - Under Mac OS X, FMU binaries directory should be darwin64, not ...) updated by
- We are progressing towards more sensible names. …
- 18:59 Ticket #2277 (Frontend - saveTotalSCode changes operator records dumping and the result cannot ...) closed by
- fixed: Fixed a while back.
- 18:58 Ticket #3164 (Code Generation - Code generation error for tuple calls with array slices) updated by
-
Status changed
- 18:57 Ticket #3082 (Code Generation - record/array codegen error) closed by
- fixed
- 18:51 Ticket #2699 (Frontend - wrong instantiation for algorithms with loops and array indexing) closed by
- fixed: Fixed in r24667
- 17:22 Ticket #3170 (*unknown* - Under Mac OS X, BouncingBall FMU segfaults in fmuCheck) created by
- Under Mac OS X, using the OpenModelica svn head from 20-Feb-2015, a …
- 17:14 Ticket #3169 (FMI - Under Mac OS X, FMU binaries directory should be darwin64, not ...) created by
- Under Mac OS X, using the OpenModelica svn head from 20-Feb-2015, when …
- 17:07 Ticket #2965 (Frontend - Information about "outer output" declarations needed in backend for ...) updated by
- I think I partially fixed the issue in …
- 12:58 Ticket #3168 (Frontend - Wrong type or wrong number of arguments) created by
- The following three models of the PowerSystems library fail with the …
- 10:23 Ticket #3165 (Frontend - Cyclically dependent parameters due to min/max attribute) updated by
-
Component changed
This is caught in the front end. The back end is just checking for … - 10:10 Ticket #3167 (Run-time - Discrete variable does not change in a discrete manner) created by
- The following total model can be used to reproduce the issue. The …
- 08:27 Ticket #3165 (Frontend - Cyclically dependent parameters due to min/max attribute) updated by
- 1. Results of polls are not part of the specification :) 1. The …
- 08:16 Ticket #3166 (Code Generation - Treatment of multiline strings with DOS line endings) closed by
- fixed: Fixed in r24645.
- 08:16 Ticket #3166 (Code Generation - Treatment of multiline strings with DOS line endings) updated by
-
Status changed
- 06:33 Ticket #3165 (Frontend - Cyclically dependent parameters due to min/max attribute) updated by
- Modelica.Fluid goes one step further. In order to solve a long …
- 05:04 Ticket #3166 (Code Generation - Treatment of multiline strings with DOS line endings) created by
- The following model contains a multiline doc string: […] Saving it …
2015-02-19:
- 13:54 Ticket #3151 (FMI - PowerSystems: BackendDAEOptimize.createJacobian failed) closed by
- fixed
- 13:53 Ticket #3165 (Frontend - Cyclically dependent parameters due to min/max attribute) created by
- […] OpenModelica throws following error message for this model: …
- 13:52 Ticket #3151 (FMI - PowerSystems: BackendDAEOptimize.createJacobian failed) updated by
- fixed in r24635.
- 13:39 Ticket #3164 (Code Generation - Code generation error for tuple calls with array slices) created by
- Code generation fails with UNKNOWN_SUBSCRIPT for the following code: […]
- 13:24 Ticket #3163 (Frontend - Cycling binding that is not cyclic detected) created by
- If M.id is renamed to M.idx, the following code works. Seems we do not …
- 11:33 Ticket #3151 (FMI - PowerSystems: BackendDAEOptimize.createJacobian failed) updated by
- This issue with +cseCall seems to be caused by a wrong adjacency …
- 09:54 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) updated by
- In case you are wondering what exactly cause the problem This …
- 09:43 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) closed by
- fixed: That is nice. The issue was actually with the incidence matrix …
- 07:27 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- The following is not optimized the correct way either (+cseCall …
- 07:20 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- Replying to casella: > Replying to vwaurich: …
- 06:51 Ticket #3160 (New Instantiation - C compilation error for array equations) updated by
- The error message has changed to (r24630): […]
- 06:47 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) updated by
- The test is back to 78 successes today (r24630)! The rigorous AC3ph …
- 00:49 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- Replying to vwaurich: > The wrong substitution should be …
2015-02-18:
- 23:20 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- Replying to sjoelund.se: > The reason $CSE75 is not easily …
- 13:33 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) updated by
-
Owner changed
I am working on it right now. The error message is a bit misleading. … - 12:32 Ticket #3162 (Installation program - apt-get update fails, due to build.openmodelica.org not responding) closed by
- fixed: Removed the bad disk from the RAID and installed a boot partition on …
- 12:10 Ticket #3162 (Installation program - apt-get update fails, due to build.openmodelica.org not responding) updated by
- No need to hurry, absolutely sufficient to wait for the new machine to …
- 09:20 Ticket #2978 (Backend - Modelica3d fails) updated by
- This is the actual error message: […] That means that the model …
- 09:07 Ticket #3162 (Installation program - apt-get update fails, due to build.openmodelica.org not responding) updated by
- It doesn't respond because the hard drive on that machine is broken …
- 08:51 Ticket #3162 (Installation program - apt-get update fails, due to build.openmodelica.org not responding) created by
- I am using Kubuntu 14.10 (Utopic) and stable OpenModelica from …
- 08:26 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) updated by
-
Cc changed
It started failing with r24602. Mahder, can you have a look? - 08:13 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) updated by
-
Status, Owner changed
- 07:59 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) updated by
-
Component changed
- 07:43 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) updated by
- Replying to mahge930: > Lennart, Willi : any ideas? > …
- 07:26 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- The wrong substitution should be fixed with [24615].
- 06:20 Ticket #3161 (Backend - Error: Internal error pre-optimization module clockPartitioning failed.) created by
- Since yesterday the number of successfully built models goes down …
- 06:02 Ticket #3159 (Frontend - Duplicate modification error) updated by
-
The same applies to examples from
Modelica.Electrical.Machines. - 05:52 Ticket #3159 (Frontend - Duplicate modification error) updated by
- The same error shows up in MSL. See …
- 01:38 Ticket #2978 (Backend - Modelica3d fails) updated by
-
Owner, Component changed
Lennart, can you have a look at this? As far as I know this happens …
2015-02-17:
- 19:32 Ticket #2933 (Code Generation - Problem with array reductions in code generation) updated by
-
Status, Owner changed
- 18:58 Ticket #3151 (FMI - PowerSystems: BackendDAEOptimize.createJacobian failed) updated by
-
Btw. the attached model fails to simulate from OMEdit with
+cseCall… - 18:49 Ticket #3082 (Code Generation - record/array codegen error) updated by
-
Status, Owner changed
- 18:49 Ticket #3082 (Code Generation - record/array codegen error) reopened by
- 18:42 Ticket #3160 (New Instantiation - C compilation error for array equations) updated by
-
Status, Owner changed
- 18:39 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) updated by
- Oh btw I have removed some unnecessary ASUB creations in r24602. This …
- 18:34 Ticket #2756 (Code Generation - OM reports an error in the C code it creates) updated by
-
Cc changed
Okay the issue with the qualified name indexing has been fixed in … - 17:58 Ticket #3151 (FMI - PowerSystems: BackendDAEOptimize.createJacobian failed) updated by
- I was positively surprised to see the FMU export working using r24573. …
- 17:50 Ticket #3160 (New Instantiation - C compilation error for array equations) updated by
-
Cc changed
- 17:46 Ticket #3134 (Code Generation - Compilation failure for functions returning two dimensional arrays) closed by
- fixed: Fixed in r2726. Yes, the issue was with how diagonal was handled in …
- 17:10 Ticket #2726 (*unknown* - Failed to build simulator - working with arrays of records (not in ...) closed by
- fixed: This must be fixed since r24578. However your actual model (not the …
- 05:57 Ticket #3074 (Backend - Insufficient information about assertion violations) updated by
- Replying to wbraun: > partially fixed in r24606. > …
2015-02-16:
- 23:04 Ticket #3074 (Backend - Insufficient information about assertion violations) updated by
-
Cc changed
partially fixed in r24606. Partially because removeSimpleEquation … - 19:07 Ticket #3160 (New Instantiation - C compilation error for array equations) created by
- The PIline models of the PowerSystems library use some non-trivial …
- 18:14 Ticket #3074 (Backend - Insufficient information about assertion violations) updated by
-
Status changed
- 16:45 Ticket #3157 (Frontend - OMEdit ignores annotation(Dialog)) closed by
- fixed: Fixed in r24598.
- 16:07 Ticket #3157 (Frontend - OMEdit ignores annotation(Dialog)) updated by
-
Status, Owner changed
- 16:02 Ticket #3157 (Frontend - OMEdit ignores annotation(Dialog)) updated by
-
Owner, Component changed
- 13:18 Ticket #3156 (Code Generation - A lot of duplicate debugging lines in the C code ...) closed by
- invalid
- 13:17 Ticket #3156 (Code Generation - A lot of duplicate debugging lines in the C code ...) updated by
- Ah, i didn't know that. Ok, then this is not a bug and we can close it.
- 13:12 Ticket #3156 (Code Generation - A lot of duplicate debugging lines in the C code ...) updated by
- Btw, what error do you think is with adding the same line over and …
- 10:22 Ticket #3158 (OMEdit - OMEdit parameter window shows wrong values for base classes) updated by
-
Status changed
- 10:19 Ticket #3157 (Frontend - OMEdit ignores annotation(Dialog)) updated by
-
Cc changed
Its becauseOMCignores the emptyDialogannotation. The GUI … - 08:55 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- Inline: […] Substitute: […] …
- 08:23 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- OK. We already treat the first statement in an algorithm special. The …
- 08:16 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- The reason $CSE75 is not easily visible in the debugging file is: 1. …
- 07:58 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- Well. It's a bit more odd than I thought it would be... […] So... …
- 06:30 Ticket #3159 (Frontend - Duplicate modification error) created by
- Currently 25 of 104 models from the PowerSystems library fail to …
- 06:06 Ticket #3158 (OMEdit - OMEdit parameter window shows wrong values for base classes) created by
- The example below parameterizes a model with a data record. OMEdit …
- 05:59 Ticket #3157 (Frontend - OMEdit ignores annotation(Dialog)) created by
- Recently we shifted parameter qualifiers from record elements to whole …
2015-02-15:
- 20:11 Ticket #3102 (Backend - Models using the IF97 water medium are slow due to lack of common ...) updated by
- it seems the function calls came from […] perhaps we handling …
- 18:36 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
-
Summary changed
- 18:35 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) closed by
- fixed: Thanks everyone who helped try to find out what went wrong. We have a …
- 18:33 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
-
Status, Owner changed
- 16:39 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- Thanks, r24585 works on Fedora 21 (gcc-4.9.2-1.fc21.x86_64) without …
- 15:40 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- If not, this will definitely fix it properly (and is just a bit …
- 15:01 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- Try r24585
- 14:48 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
-
I have a possible fix in the works (replacing
MMC_THROW_INTERNAL… - 13:32 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- I did some less successful flag testing last night. To get the …
- 13:23 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- All of the flags succeeded. So it is some combination of flags? :(
- 12:10 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- I will try: […]
- 10:16 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
-
If you pass
CFLAGS="-fno-tree-bit-cpp", you will automatically use … - 09:39 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- Passing CFLAGS="-fno-tree-bit-ccp" to the configure script solves the …
- 08:09 Ticket #3156 (Code Generation - A lot of duplicate debugging lines in the C code ...) updated by
- Yes, OMC_FILE are from the C-file
- 03:47 Ticket #3156 (Code Generation - A lot of duplicate debugging lines in the C code ...) created by
- We get a lot of the same line in the C code, i.e.: […] Also, …
2015-02-14:
- 02:23 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- Even with -O1 it has issues. It seems that some of the optimizations …
- 00:13 Ticket #3147 (Code Generation - gcc 4.9 generates bad code for longjmp in local scope) updated by
- Here is the optimization diff: […]
Note:
See TracTimeline
for information about the timeline view.
