Timeline
2014-10-24:
- 23:59 Ticket #2267 (OMEdit - parametric plot of more than one variable) updated by
- Replying to lochel: > Replying to adeas31: > > …
- 20:13 Ticket #2930 (OMEdit - Printing models drops lines) created by
- If I print a model from OMEdit many lines don't show up completely. As …
- 19:35 Ticket #2267 (OMEdit - parametric plot of more than one variable) updated by
- Replying to adeas31: > I thought a bit about it and it …
- 15:13 Ticket #2929 (Frontend - Encapsulation does not work) created by
- Remove "import DAE" from Static.mo - omc compiles fine, but should not …
- 15:05 Ticket #2267 (OMEdit - parametric plot of more than one variable) closed by
- wontfix: I thought a bit about it and it seems impossible to use the same …
- 14:56 Ticket #2188 (OMEdit - Handling of arrays in the plot window needs improvement in OMEdit) closed by
- fixed
- 14:35 Ticket #2195 (OMEdit - Omedit does not consider its own changes) closed by
- worksforme: I just tried it with r22920 and it seems to work fine. Perhaps this …
- 14:01 Ticket #2673 (Run-time - OMEdit does not import initial conditions correctly) updated by
-
Component changed
- 09:04 Ticket #2928 (Run-time - Event handling at time=startTime) created by
- What is the expected result for y at time=startTime (not at …
- 00:44 Ticket #2674 (OMEdit - Sorting of Array-Variables in OMEdit) closed by
- fixed: Fixed in r22879.
- 00:39 Ticket #2776 (FMI - Process crashed: Simulation process exited with code 0 on FMU import) updated by
-
Component changed
- 00:35 Ticket #2645 (OMEdit - Make re-simulation easier to find in OMEdit) closed by
- fixed: The first part of this ticket i.e make re-simulation easier to find is …
- 00:22 Ticket #2130 (FMI - Parameters in FMU's) updated by
-
Cc, Component, Milestone changed
2014-10-23:
- 19:35 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- Replying to sjoelund.se: > Wait until after the release so …
- 19:24 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- Wait until after the release so OMEdit can keep up ;)
- 19:00 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- Replying to sjoelund.se: > Well, it would make some sense …
- 18:05 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- Well, it would make some sense to have integrator options for each …
- 17:04 Ticket #2480 (Run-time - Documentation of integration algorithms) updated by
- r22898, r22897. Added IntegrationAlgorithms.pdf to OpenModelica …
- 15:29 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- Replying to lochel: > Replying to wbraun: > > …
- 15:13 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- Replying to wbraun: > We can do that by using the solver …
- 14:32 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
- >1. In the case of variable-step size solver, it is often useful to …
- 14:24 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
-
Added
-noEventEmitsimulation flag option in r22891. Now there is a … - 13:49 Ticket #2927 (Backend - Wrong zero crossing function generation) updated by
- For discrete variables it should not be generate zero crossings.
- 13:48 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to casella: > > Soon people will want the …
- 13:43 Ticket #2927 (Backend - Wrong zero crossing function generation) updated by
- The debug-dump "relidx" prints: […] This output is not very …
- 13:27 Ticket #2927 (Backend - Wrong zero crossing function generation) updated by
-
Description changed
- 13:18 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
-
Cc changed
Replying to sjoelund.se: > Because the simflags are not … - 13:09 Ticket #2927 (Backend - Wrong zero crossing function generation) created by
- For this model: […] The omc generate 4 zero crossing functions …
- 11:12 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Because the simflags are not really part of omc? Soon people will want …
- 11:07 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to sjoelund.se: > Split into help("simulation") …
- 11:02 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Split into help("simulation") and help("simulationdetailed")?
- 10:43 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to sjoelund.se: > Why is this needed? Is it not …
- 10:15 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Why is this needed? Is it not enough to print all simflags using …
- 10:04 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to sjoelund.se: > It seems help() only generates …
- 09:41 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to casella: > Replying to lochel: > …
- 09:28 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to lochel: > I have something in mind like …
- 09:23 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- So structure the help system to output the sections you want. We have …
- 09:15 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to sjoelund.se: > Replying to lochel: …
- 09:09 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to lochel: > Well, that might be possible. But …
- 09:06 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to sjoelund.se: > Replying to lochel: …
- 08:57 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Replying to lochel: > Yes, that's true. But it is not …
- 08:54 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- I have something in mind like …
- 08:50 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- It would be also helpful in the OMNotebook environment, to bring up …
- 08:49 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- Yes, that's true. But it is not possible to generate a help text of a …
- 08:47 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
- You can already do help("debug"), help("profiling"), etc. If you had …
- 08:35 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
-
Cc changed
One way to solve this in a short term would be an automatically … - 06:56 Ticket #2925 (Frontend - Functions use default value instead of actual value) updated by
-
Owner, Milestone, Component, Summary changed
This is true also for Modelica functions: […] Gives: […]
2014-10-22:
- 22:23 Ticket #2904 (Documentation - Clarify how to get information about and use all the OMC flags) updated by
- See also #2913
- 19:28 Ticket #2922 (OMEdit - View arrays in numerical order) closed by
- fixed: Fixed in r22879.
- 17:04 Ticket #2926 (Frontend - Check uses-annotation on loadFile) created by
- The front-end will now load models from the uses-annotation of a …
- 16:50 Ticket #2924 (Frontend - Extending a model fails) updated by
-
Status, Owner, Component changed
After I got a debug model I found out where the problem is. It seems … - 15:28 Ticket #2925 (Frontend - Functions use default value instead of actual value) created by
- The following model returns {1} instead of the expected {2}: […] It …
- 14:52 Ticket #2411 (OMEdit - Changes in parameters in extended model don't change) closed by
- fixed
- 14:51 Ticket #2411 (OMEdit - Changes in parameters in extended model don't change) updated by
- I just tried it out, and I can't now reproduce it. So, yes, it …
- 14:45 Ticket #2411 (OMEdit - Changes in parameters in extended model don't change) updated by
-
Status changed
Can you provide a usecase for it? r17626 is very old. I guess this … - 13:47 Ticket #2924 (Frontend - Extending a model fails) updated by
- Then is really strange that extending the model doesn't work. …
- 13:40 Ticket #2924 (Frontend - Extending a model fails) updated by
- No, it doesn't have inner/outer, expandable, or overconstrained connectors.
- 13:32 Ticket #2924 (Frontend - Extending a model fails) updated by
- Hi, Do you have use any inner/outer or expandable connectors in your …
- 13:21 Ticket #2924 (Frontend - Extending a model fails) created by
- I have a model (unfortunately, proprietary, so i can't put it here) …
- 10:04 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- I agree, it should be possible to deactivate expression …
- 09:57 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- The Codegen should anyway be able to handle ASUB as not all …
- 09:54 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- No. Codegen should not have to deal with stupid expressions. If you …
- 09:52 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- Your proposal sounds good. And we should anyway fix the problems in …
- 09:50 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- The problem is most models require simplification in order to generate …
- 09:47 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- I think we should have both. noSimplify (really no simplify) and …
- 09:46 Ticket #2922 (OMEdit - View arrays in numerical order) updated by
-
Status changed
- 09:35 Ticket #2897 (MetaModelica - continue statement for for- and while-statements) reopened by
- We need to decide what continue should do in a match/matchcontinue …
- 09:26 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) updated by
- The flag should be called noExpensiveSimplify, not noSimplify.
- 08:19 Ticket #2923 (Frontend - Expressions get simplified even if flag noSimplify is used) created by
- I know the flag noSimplify is a very old one. This could either mean …
- 07:21 Ticket #2919 (Frontend - Call model.variable with a parameter) closed by
- invalid: Modelica does not support meta-programming. You cannot concatenate …
- 07:14 Ticket #2919 (Frontend - Call model.variable with a parameter) updated by
- Hi, Actually I have a model with some Rotationnal.Inertia in. I would …
- 02:25 Ticket #2917 (Interactive Environment - Unable to add/modify/delete protected classes) closed by
- fixed: Fixed in r22862.
- 00:56 Ticket #2922 (OMEdit - View arrays in numerical order) created by
- When array variables are viewed in OMEdit, they are sorted in ascii …
2014-10-21:
- 21:30 Ticket #2921 (Backend - Final parameters that depend on non-final parameters should not be ...) updated by
- Added also a Modelica ticket about this m:#1592.
- 21:17 Ticket #2921 (Backend - Final parameters that depend on non-final parameters should not be ...) updated by
-
Cc changed
- 21:17 Ticket #2921 (Backend - Final parameters that depend on non-final parameters should not be ...) created by
- Here is an example (from BoschRexroth): […] which after front-end …
- 19:59 Ticket #2919 (Frontend - Call model.variable with a parameter) updated by
- I think hed204 wants to simulate several models based on the M[i] name …
- 15:53 Ticket #2919 (Frontend - Call model.variable with a parameter) updated by
-
"Inertia" + String(i) + ".J"I guess? - 15:39 Ticket #2920 (*unknown* - Export CSV from mat) created by
- As a wishlist item: It would be nice to be able to run a simulation …
- 15:38 Ticket #2912 (Code Generation - 2 models that work separately, but not when put together) updated by
-
Status, Owner, Component changed
This is a code generation bug not OMEdit. - 15:35 Ticket #2912 (Code Generation - 2 models that work separately, but not when put together) updated by
-
Priority, Owner, Milestone, Component, Summary changed
- 15:26 Ticket #2919 (Frontend - Call model.variable with a parameter) updated by
- I don't understand what you want to do. Share complete model.
- 15:22 Ticket #2919 (Frontend - Call model.variable with a parameter) created by
- Hi everybody, I searched a solution for it whithout succes... there …
- 14:03 Ticket #2918 (Frontend - Problem with arrays) closed by
- worksforme
- 14:03 Ticket #2918 (Frontend - Problem with arrays) updated by
- Replying to sjoelund.se: > I noted that. They both work …
- 12:58 Ticket #2591 (Interactive Environment - backend debug-dump within OMEdit) updated by
- The dumps should not be handled by getErrorString(). They are not …
- 12:33 Ticket #2918 (Frontend - Problem with arrays) updated by
- I noted that. They both work using 1.9.1+dev (r22828)
- 12:31 Ticket #2918 (Frontend - Problem with arrays) updated by
- Replying to sjoelund.se: > Which revision of omc is this? …
- 12:21 Ticket #2470 (OMEdit - Display values and descriptions for all variables) closed by
- fixed
- 12:18 Ticket #2591 (Interactive Environment - backend debug-dump within OMEdit) updated by
-
Cc, Owner, Component changed
From OMEdit point of view, ifgetErrorString()handles it then we … - 11:26 Ticket #2918 (Frontend - Problem with arrays) updated by
- Which revision of omc is this? The model (and function) generate good …
- 06:25 Ticket #2776 (FMI - Process crashed: Simulation process exited with code 0 on FMU import) updated by
-
Status, Owner changed
2014-10-20:
- 22:02 Ticket #2776 (FMI - Process crashed: Simulation process exited with code 0 on FMU import) updated by
-
Cc changed
- 21:52 Ticket #2797 (OMEdit - Documentation view and parameter dialogue do not render images) closed by
- fixed
- 21:51 Ticket #2389 (OMEdit - OMEdit hangs when browse Modelica/Media/Air) closed by
- worksforme: Works fine in r22808.
- 21:46 Ticket #2865 (OMEdit - OMEdit crash reports needs better handling) closed by
- fixed: Done in r22797.
- 21:44 Ticket #2327 (OMEdit - Reading from an external file is very slow) updated by
-
Status, Owner changed
- 19:44 Ticket #2918 (Frontend - Problem with arrays) updated by
- Can you give a minimal model? If is not public you can send it to us …
- 18:54 Ticket #2918 (Frontend - Problem with arrays) created by
- I'm running a model which contains 4 arrays of size n. It runs …
- 18:08 Ticket #2917 (Interactive Environment - Unable to add/modify/delete protected classes) updated by
-
Status, Milestone changed
- 18:05 Ticket #2917 (Interactive Environment - Unable to add/modify/delete protected classes) created by
- Run the attached script. There is description for each case in the …
- 17:48 Ticket #2916 (Frontend - Handle overconstrained Connections.* with array of zero size) closed by
- fixed: Fixed in r22827.
- 17:43 Ticket #2916 (Frontend - Handle overconstrained Connections.* with array of zero size) created by
- These are used in PowerSystems library. See also m:#1590.
- 17:23 Ticket #2673 (Run-time - OMEdit does not import initial conditions correctly) reopened by
- Not done yet... Consider this test case: […] Test procedure: * …
- 17:20 Ticket #2915 (MetaModelica - Warn or error when re-binding the same variable in pattern mattching) created by
- […] should give at least a warning.
- 15:03 Ticket #2903 (OMEdit - Output protected variables in OMEdit simulations) closed by
- fixed: Done in r22823.
- 13:34 Ticket #2914 (Frontend - Redeclaration is not applied) created by
- Redeclaration is not applied in the following example: […] …
- 13:11 Ticket #2913 (Build Environment - Online documentation of OMC flags) updated by
-
Type changed
- 13:10 Ticket #2913 (Build Environment - Online documentation of OMC flags) created by
- The OMC compiler and the executable codes it generates have a lot of …
- 13:02 Ticket #2911 (Code Generation - Error caused by utilizing array " Compilation process ...) closed by
- fixed
- 12:16 Ticket #2812 (Installation program - Remove obsolete sections from documentation) updated by
-
Cc changed
- 10:31 Ticket #2911 (Code Generation - Error caused by utilizing array " Compilation process ...) updated by
-
Component changed
- 09:47 Ticket #2912 (Code Generation - 2 models that work separately, but not when put together) created by
- I have 2 models that work fine, but when I put them together, I get an …
- 09:38 Ticket #2911 (Code Generation - Error caused by utilizing array " Compilation process ...) created by
- model Q parameter Real[2, 1] ini_0(each fixed = false); parameter …
2014-10-19:
- 19:48 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) updated by
-
Component, Milestone changed
- 19:47 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) closed by
- fixed
- 19:47 Ticket #2899 (Frontend - Wrong number of equations in expandable connectors model) updated by
- Fixed in r22809. Added the attached model as test.
- 00:56 Ticket #2877 (Frontend - saveTotalSCode with +showAnnotations generates bad file) closed by
- fixed: Fixed in r22808.
2014-10-18:
- 11:52 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
- I did not push all my changes into the trunk/ so the way package …
- 11:41 Ticket #2910 (*unknown* - Saving model problems) created by
- When you want to create a model inside a package, OMEdit returns the …
- 05:59 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
- The simulation executable does not depend on the dll's though. They …
- 00:47 Ticket #2565 (New Instantiation - Problems with code generation - package constants in ExternalMedia) updated by
-
Cc changed
I've retried with r22761 but I still get 79 dlls to compute the damn … - 00:27 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) created by
- When generating simulation code, omc outputs a large number of …
- 00:16 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 00:10 Ticket #2506 (OMEdit - Keep connecting lines manhattanized) updated by
- See also #2477
- 00:09 Ticket #2506 (OMEdit - Keep connecting lines manhattanized) updated by
- A good management of manhattanized connections should make sure that …
2014-10-17:
- 23:59 Ticket #2477 (OMEdit - Icon snap to grid function) updated by
- In fact, I noticed that the grid feature is already implemented in …
- 23:40 Ticket #2477 (OMEdit - Icon snap to grid function) updated by
- The MSL was developed using Dymola, which adopts a grid step of 2: if …
- 23:27 Ticket #2908 (OMEdit - OMEdit does not update models when submodels are changed) created by
- Try this experiment with OMEdit. 1. Create a model A which contains …
- 17:04 Ticket #2907 (*unknown* - Inner model with algorithm fails) created by
- Using the nightly build 22761, the following script fails under the …
- 16:43 Ticket #2840 (FMI - Segmentation fault if assertion fails in FMU) closed by
- fixed: fixed in r22801.
- 15:56 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
- I've always been a strong supporter of OMEdit GUI improvements. I …
- 14:25 Ticket #2898 (Frontend - Error in one model makes all other models fail) closed by
- fixed: Fixed in r22798, at least so that models in the compliance test suit …
- 14:02 Ticket #2904 (Documentation - Clarify how to get information about and use all the OMC flags) updated by
-
Cc changed
- 13:48 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 13:48 Ticket #2906 (OMEdit - Enumeration parameter input by drop-down menu) updated by
-
Description changed
- 13:41 Ticket #2906 (OMEdit - Enumeration parameter input by drop-down menu) created by
- The values of enumeration-type parameters have to be typed in …
- 13:22 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 13:19 Ticket #2905 (Frontend - Provide comment-preserving parsing and unparsing) created by
- The OMEdit GUI is based on OMC for all editing activities. When OMC …
- 12:58 Ticket #2903 (OMEdit - Output protected variables in OMEdit simulations) updated by
- Replying to adeas31: > The simulation flags are in …
- 12:12 Ticket #2904 (Documentation - Clarify how to get information about and use all the OMC flags) updated by
-
Cc changed
- 12:11 Ticket #2051 (Interactive Environment - bad documented api-calls) updated by
- See also #2904
- 12:10 Ticket #2480 (Run-time - Documentation of integration algorithms) updated by
- Last June, Vitalij prepared this nice document: …
- 12:01 Ticket #2904 (Documentation - Clarify how to get information about and use all the OMC flags) updated by
-
Cc changed
- 11:59 Ticket #2865 (OMEdit - OMEdit crash reports needs better handling) updated by
- You should get a permanent URL for it before the release ;)
- 11:58 Ticket #2903 (OMEdit - Output protected variables in OMEdit simulations) updated by
-
The simulation flags are in
Simulation Flagstab and not inOutput… - 11:55 Ticket #2865 (OMEdit - OMEdit crash reports needs better handling) updated by
- From r22785 OMEdit uses the http upload approach for crash reports. …
- 11:51 Ticket #2904 (Documentation - Clarify how to get information about and use all the OMC flags) created by
- The OMC compiler and the simulation executables it builds feature …
- 11:50 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
Owner changed
I was able to add it like this: […] The equation is only added … - 09:44 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 09:39 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
Weird.
Ceval.ceval DAE.CALL failed: Complex.'*'.multiply(a, b)is … - 09:34 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
Status, Owner changed
- 09:33 Ticket #2903 (OMEdit - Output protected variables in OMEdit simulations) created by
- the -emit_protected flag applied to the simulation executable outputs …
- 09:30 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
Cc, Component changed
You can use even the following easier model: […] - 09:28 Ticket #2900 (Frontend - Assign Value to A Complex Parameter) closed by
- duplicate: Is related to #2902, so duplicate.
- 09:18 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
I get the same result for
Example3.mo. - 09:13 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
- I did some slight changes to the model to get it compile. For me, both …
- 09:03 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
I just wrote my own function
conj. Maybe the way it is written … - 08:55 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
The function
conjis missing, but seem to be essential. - 08:51 Ticket #2902 (Frontend - Complex parameter binding lost) updated by
-
Cc, Description changed
- 08:46 Ticket #2902 (Frontend - Complex parameter binding lost) created by
- Hi look, […] Check that the value of It is zero but ItOK got its …
- 07:49 Ticket #2889 (MetaModelica - Function pointers loose their default values) closed by
- fixed: Re-fixed in r22783.
- 07:35 Ticket #2889 (MetaModelica - Function pointers loose their default values) updated by
- My commit was reverted in r22769 …
- 07:16 Ticket #2897 (MetaModelica - continue statement for for- and while-statements) closed by
- fixed: Fixed in r22782.
- 06:14 Ticket #2889 (MetaModelica - Function pointers loose their default values) reopened by
- The test added to hudson seems to seg.fault. Worked fine on my …
Note:
See TracTimeline
for information about the timeline view.
