Timeline
2017-10-03:
- 23:36 Ticket #3636 (*unknown* - Supporting MSL 3.2.2) updated by
- The situation has improved, now OMC can simulate 373 models out of 385 …
- 23:28 Ticket #4516 (Installation program - Fix Linux RPM packages for version 1.12 and update webpage information) updated by
-
Priority changed
Please restore the proper 1.11.0 RPMs and set up the 1.12.beta2 … - 23:19 Ticket #4233 (Interactive Environment - Consecutive end <class> statements on the same lines wreak havoc in OMEdit) closed by
- fixed: Seems to be fixed now, as I could no longer reproduce the error.
- 23:13 Ticket #4436 (OMEdit - Improve how equations are shown in the declarative debugger when ...) closed by
- fixed
- 23:12 Ticket #3906 (OMEdit - Visualization of equation transformations in OMEdit broken) closed by
- fixed: This problem was fixed in #4444
- 23:07 Ticket #3614 (*unknown* - Much larger memory consumption of OMC under Linux than under Windows) closed by
- fixed: Memory usage has shrunk a lot in the last two years. I'm going to …
- 22:59 Ticket #4388 (Backend - collectInitialBindings scales as O(N^2)) updated by
- Update: with today's development version, the collectInitialBindings …
- 21:17 Ticket #4540 (Cpp Run-time - Cannot change CFLAGS for C++ FMI simulations) updated by
-
Hmm... The simulators of the C and Cpp runtime are compiled with
-O0… - 11:20 Ticket #4508 (Installation program - The windows nightly installer/uninstaller is too slow) closed by
- fixed: Replying to adeas31: > Replying to hkiel: > > …
- 09:30 Ticket #4541 (New Instantiation - connect last array element using [end]) updated by
- @perost just showed me a 3.4 spec draft where they are parameter …
- 09:22 Ticket #4540 (Cpp Run-time - Cannot change CFLAGS for C++ FMI simulations) updated by
- In Simulation Setup: > C/C++ Compiler Flags (Optional): textbox …
- 08:37 Ticket #4540 (Cpp Run-time - Cannot change CFLAGS for C++ FMI simulations) updated by
- The current practice is to manually modify the automatically generated …
- 07:56 Ticket #4508 (Installation program - The windows nightly installer/uninstaller is too slow) updated by
- Replying to casella: > This is obviously a good idea, but …
- 07:52 Ticket #4539 (Third-Party Libraries - Vendor specific annotation in MSL) updated by
- Yes, we need it in trunk as well. Additional the same annotation is …
- 07:52 Ticket #4508 (Installation program - The windows nightly installer/uninstaller is too slow) updated by
- Replying to hkiel: > Would it be even feasible to generate …
- 06:52 Ticket #4539 (Third-Party Libraries - Vendor specific annotation in MSL) updated by
-
Milestone changed
I added the fix to … - 06:25 Ticket #4541 (New Instantiation - connect last array element using [end]) updated by
-
Cc, Status, Component, Owner changed
> Subscripts in a connector reference shall be parameter expressions …
2017-10-02:
- 22:12 Ticket #4534 (Code Generation - Stack overflow in SimCodeUtil.createAllDiffedSimVars) closed by
- fixed: No more stack overflows with this test, even if I reduce the stack …
- 16:23 Ticket #4398 (Backend - comSubExp scales as O(N^2)) updated by
- Update, the situation as of 21 Sep 2017 is ||= N =||=time=|| || 3200 …
- 16:21 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) updated by
- May be way too late, since the issue appears already as fixed: […]
- 15:48 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) updated by
-
Status, Owner changed
These are the statistics of the OMEdit working directory on my PC, … - 14:29 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) closed by
- fixed
- 13:10 Ticket #3749 (FMI - Generated FMUs for C and CPP have different names) closed by
- fixed: This is now being fixed. FMI 2.0 will use dots and accept …
- 13:05 Ticket #4538 (Interactive Environment - OMPython is not reading simflags correctly) updated by
- Yes its the simflags. OMEdit basically reads them via …
- 12:10 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
- Tried it right now with the latest nightly and OMEdit, installed in …
- 11:38 Ticket #4528 (Code Generation - buildModelFMU doesn't respect the fileNamePrefix argument) closed by
- fixed: This is fixed with …
- 10:41 Ticket #4538 (Interactive Environment - OMPython is not reading simflags correctly) updated by
-
Cc, Owner, Component, Milestone changed
This is an OMEdit-specific flag as far as I can tell. And other OM … - 10:31 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) updated by
- This is because 8d1b0784 hard-coded the OSX-specific @loader-path in …
- 09:50 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) updated by
- @Christian Kral can you provide me with output of "ldd OMShell" …
- 09:46 Ticket #4541 (New Instantiation - connect last array element using [end]) created by
- I took the example Modelica.Electrical.Analog.Examples.HeatingResistor …
- 09:37 Ticket #4539 (Third-Party Libraries - Vendor specific annotation in MSL) updated by
- We do have some patches that we apply to our copy of MSL. The …
- 07:42 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) updated by
-
Cc, Priority, Status, Owner, Milestone changed
@hkiel can you take a look at it? - 07:00 Ticket #4540 (Cpp Run-time - Cannot change CFLAGS for C++ FMI simulations) created by
- The C++ runtime does not respect the optimization flags set by the …
2017-10-01:
- 13:46 Ticket #4539 (Third-Party Libraries - Vendor specific annotation in MSL) created by
- Vendor specific annotations are not allowed in the MSL (see …
- 13:38 Ticket #4538 (Interactive Environment - OMPython is not reading simflags correctly) updated by
- Just a marginal comment, not related with the issue: I removed the …
- 08:36 Ticket #4491 (Build Environment - OM does not compile Modelica trunk experiments with tables) updated by
- I very much appreciate your effort for making this work. Thank you.
- 08:33 Ticket #4538 (Interactive Environment - OMPython is not reading simflags correctly) created by
- I am using OMPython to automatically simulate and evaluate simulation …
2017-09-30:
- 22:11 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) updated by
- I can, however, locate the missing library […]
- 22:10 Ticket #4537 (Command Prompt Environment - OMShell not starting on Linux) created by
- When I try to start OMShell or OMShell-terminal I get the following …
- 14:26 Ticket #4519 (Backend - Solving equations with a division by zero) updated by
- OK, I have some new information here: I traced back the problem to the …
2017-09-29:
- 13:08 Ticket #4534 (Code Generation - Stack overflow in SimCodeUtil.createAllDiffedSimVars) updated by
- I implemented a fix that avoids recursion in …
- 08:44 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) created by
- I noticed that when one duplicates a class or package of classes and …
- 08:39 Ticket #4534 (Code Generation - Stack overflow in SimCodeUtil.createAllDiffedSimVars) updated by
-
Summary changed
SimCodeUtil.createNonlinearResidualEquationsis now fine, but …
2017-09-28:
- 16:23 Ticket #4535 (Backend - Structural singularity related to electric ground placement) created by
- I've been trying to model three phase inverters (AC-DC converters, …
- 07:32 Ticket #4534 (Code Generation - Stack overflow in SimCodeUtil.createAllDiffedSimVars) updated by
- I implemented a fix that avoids recursion in …
- 05:20 Ticket #4530 (Backend - Wrong implementation of sub/superSample in conjunction with shiftSample) closed by
- fixed
- 05:09 Ticket #4528 (Code Generation - buildModelFMU doesn't respect the fileNamePrefix argument) updated by
- This is from the User’s Guide: […] The behaviour should be, that …
2017-09-27:
- 19:08 Ticket #4528 (Code Generation - buildModelFMU doesn't respect the fileNamePrefix argument) updated by
- Cpp uses the model name as FMU name (including possible packages …
- 15:13 Ticket #4392 (Backend - Stack overflow in calculateStrongComponentJacobians) updated by
- In fact, after some more testing I still got stack overflow, this time …
- 15:13 Ticket #4534 (Code Generation - Stack overflow in SimCodeUtil.createAllDiffedSimVars) created by
- I have a large model with 200.000 equations that gives stack overflow …
- 14:43 Ticket #4392 (Backend - Stack overflow in calculateStrongComponentJacobians) closed by
- fixed: Problem solved, thanks!
- 13:51 Ticket #4530 (Backend - Wrong implementation of sub/superSample in conjunction with shiftSample) updated by
- This commit seems to fix the problem: …
- 13:36 Ticket #4533 (FMI - FMIL cannot delete Cpp FMUs binaries) updated by
-
Status, Owner changed
Removal of FMUs is done regularily by HQP. It even dlcloses and … - 11:59 Ticket #4529 (FMI - [c runtime] FMI setReal/getReal doesn't work) closed by
- fixed: Done; see [https://github.com/OpenModelica/OMCompiler/pull/1835 …
- 11:47 Ticket #4533 (FMI - FMIL cannot delete Cpp FMUs binaries) created by
- I have no clue why, but the FMILibrary cannot remove the binaries for …
- 11:10 Ticket #4532 (FMI - FMI calling sequences for fmi2SetInteger) created by
- It seems that Cpp FMUs doesn't check for valid calling sequences …
- 09:34 Ticket #4529 (FMI - [c runtime] FMI setReal/getReal doesn't work) updated by
- Yes, I will push that change today.
- 09:23 Ticket #4529 (FMI - [c runtime] FMI setReal/getReal doesn't work) updated by
- We just need to do the same for all other types.
- 09:22 Ticket #4529 (FMI - [c runtime] FMI setReal/getReal doesn't work) updated by
-
Priority, Status changed
- 09:16 Ticket #4529 (FMI - [c runtime] FMI setReal/getReal doesn't work) updated by
- This is fixed now with …
- 09:02 Ticket #4530 (Backend - Wrong implementation of sub/superSample in conjunction with shiftSample) updated by
-
Cc, Status, Owner, Milestone changed
- 07:52 Ticket #4508 (Installation program - The windows nightly installer/uninstaller is too slow) updated by
- Would it make sense to distribute the nightlies for Windows using a …
- 07:38 Ticket #4524 (Frontend - Simple KeyWordIO example does not work in OM) updated by
-
Summary changed
- 07:37 Ticket #4524 (Frontend - Simple KeyWordIO example does not work in OM) updated by
- Good morning, thanks for the fix of the size operator. I tested my …
- 07:18 Ticket #4524 (Frontend - Simple KeyWordIO example does not work in OM) reopened by
- 06:36 Ticket #4530 (Backend - Wrong implementation of sub/superSample in conjunction with shiftSample) updated by
-
Component, Description changed
- 05:48 Ticket #4531 (Frontend - Enable unit checking by default) updated by
- I agree - this sounds very reasonable.
2017-09-26:
- 18:42 Ticket #4522 (Third-Party Libraries - ThermoPower and msgpack-modelica point to invalid commits) updated by
- You shouldn't get an error for that. That revision for …
- 17:27 Ticket #4526 (New Instantiation - Propagate displayUnits on simple equations) updated by
- @mahge930 reports: I think this is already supported. Can you try …
- 17:27 Ticket #4531 (Frontend - Enable unit checking by default) created by
-
We have tested the unit checking feature
-d=frontEndUnitCheck… - 16:29 Ticket #4530 (Backend - Wrong implementation of sub/superSample in conjunction with shiftSample) created by
- Modelica spec 3.3 Rev1, section 16.5.2 Sub-clock conversion specifies …
- 13:40 Ticket #4522 (Third-Party Libraries - ThermoPower and msgpack-modelica point to invalid commits) updated by
-
Cc, Owner, Component changed
- 12:21 Ticket #4524 (Frontend - Simple KeyWordIO example does not work in OM) closed by
- fixed: Fixed in r7fb6389. The issue was in …
- 12:01 Ticket #4524 (Frontend - Simple KeyWordIO example does not work in OM) updated by
- Hi! Thank you very much for working on that ticket, Henning Kiel! It's …
- 11:56 Ticket #4529 (FMI - [c runtime] FMI setReal/getReal doesn't work) created by
-
Updating an input value using the FMI interface
setRealdoesn't … - 11:19 Ticket #4528 (Code Generation - buildModelFMU doesn't respect the fileNamePrefix argument) updated by
- For some reasons the compilation process doesn't work if the target …
- 09:44 Ticket #4528 (Code Generation - buildModelFMU doesn't respect the fileNamePrefix argument) created by
-
1. Is there a good reason to replace
.with_in the prefix … - 09:27 Ticket #4472 (OMEdit - OMEdit corrupts files) updated by
- The solution was fine but was redundant as we are doing exactly the …
Note:
See TracTimeline
for information about the timeline view.
