Timeline
2020-02-20:
- 22:51 Ticket #5843 (Run-time - Make sure daeMode works in a reliable way) updated by
- Replying to AnHeuermann: > Let's start with a first class …
- 21:56 Ticket #5859 (OMEdit - Make OMEdit display "pu" instead of "1"?) updated by
- See also #5773
- 21:55 Ticket #5859 (OMEdit - Make OMEdit display "pu" instead of "1"?) updated by
- Replying to dietmarw: > Well as EE I support this 1. :-) …
- 21:52 Ticket #5860 (Run-time - Provide correct and efficient event handling in --daeMode) updated by
-
Cc changed
- 21:51 Ticket #5860 (Run-time - Provide correct and efficient event handling in --daeMode) updated by
- As I understand it, the starting point is the synchronous data flow …
- 21:33 Ticket #5859 (OMEdit - Make OMEdit display "pu" instead of "1"?) updated by
- Replying to casella: > I support this 100%. Well as EE I …
- 21:25 Ticket #5843 (Run-time - Make sure daeMode works in a reliable way) updated by
- Replying to AnHeuermann: You correctly pointed out a …
- 21:24 Ticket #5860 (Run-time - Provide correct and efficient event handling in --daeMode) updated by
-
Status, Owner changed
- 21:24 Ticket #5860 (Run-time - Provide correct and efficient event handling in --daeMode) created by
- AnHeuermann reports in ticket:5843#comment:1: Let's start with a …
- 21:19 Ticket #5859 (OMEdit - Make OMEdit display "pu" instead of "1"?) updated by
- I support this 100%. BTW, we could have two different display units …
- 17:30 Ticket #5859 (OMEdit - Make OMEdit display "pu" instead of "1"?) created by
-
The unit for
Modelica.SIunits.PerUnitis defined with "1" and also … - 14:18 Ticket #5843 (Run-time - Make sure daeMode works in a reliable way) updated by
- Let's start with a first class of problems: Verification failed …
- 10:38 Ticket #5726 (Third-Party Libraries - Categorize open-source libraries in OpenModelica for different uses) updated by
- For the record, I add the links to - the …
- 09:33 Ticket #5858 (Interactive Environment - Develop a manager for Modelica packages) updated by
-
Description changed
- 09:02 Ticket #5858 (Interactive Environment - Develop a manager for Modelica packages) updated by
-
Status, Owner, Description changed
- 08:57 Ticket #5858 (Interactive Environment - Develop a manager for Modelica packages) created by
- Backend: * We need to be able to categorize packages (#5726) - The …
2020-02-19:
- 21:55 Ticket #5726 (Third-Party Libraries - Categorize open-source libraries in OpenModelica for different uses) updated by
-
Description changed
- 21:48 Ticket #5857 (Backend - MSL OpAmp simulation results in OM) updated by
-
Priority, Owner, Component changed
- 21:41 Ticket #5857 (Backend - MSL OpAmp simulation results in OM) updated by
-
The OM strict simulation (
strict = true) shows the following … - 21:30 Ticket #5857 (Backend - MSL OpAmp simulation results in OM) updated by
- Refs #5458
- 21:15 Ticket #5857 (Backend - MSL OpAmp simulation results in OM) created by
- I am referring to the recent PRs in the MSL 4.0.0 (and 3.2.3 …
- 19:34 Ticket #5726 (Third-Party Libraries - Categorize open-source libraries in OpenModelica for different uses) updated by
-
Description changed
- 18:03 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- Replying to perost: > I'm really not sure. Then we should …
- 17:58 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) updated by
- Thanks to the reporter and to the fixer! MWEs (in fact, MNWEs in …
- 16:33 Ticket #5847 (New Instantiation - Constant is used without having been given a value) updated by
-
FYI, I confirm (if there was any need for) that initializing
R_rel… - 16:11 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
-
Cc, Status, Owner changed
- 16:11 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- Seems to be an error with your model. You are initializing the …
- 14:13 Ticket #5797 (Backend - Disabling tearing breaks code generation in power system model when ...) updated by
- I'm adding the better error messages to PR …
- 14:10 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- grid.mo was already attached at the first post
- 13:51 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- With your model, it works. But i can´t set this flag in my grid model. …
- 13:42 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- I wrote those lines in the fmu.mos and called it with the following …
- 13:20 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- I don't have PyFMI installed, so I can't check what it's saying to …
- 13:19 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- Minimal working example: […] I get a modelDescription.xml with […]
- 13:17 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
-
Status changed
I think this feature is right now available only with the cpp runtime. - 12:50 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
-
Cc changed
- 11:51 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) closed by
- fixed: Fixed in d3c77b8.
- 11:04 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) updated by
- Replying to dariomangoni@…: > In the attachment you will …
- 10:59 Ticket #5856 (OMEdit - Use helper function instead of QString::number(double)) updated by
- https://github.com/OpenModelica/OpenModelica/pull/737 fixes the issue …
- 10:55 Ticket #5856 (OMEdit - Use helper function instead of QString::number(double)) created by
-
QString::number(double)by default has a low precision, which might … - 10:22 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- Replying to casella: > The question is, is such a naive …
- 09:57 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) updated by
-
In the attachment you will find a
Testmodel that should replicate … - 09:47 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- Replying to perost: > I'm not sure. A naive implementation …
- 08:58 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- Replying to casella: > How long do you think developing …
- 08:01 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
- It was "ready next week" about 11 years ago, so I guess just a little …
2020-02-18:
- 23:23 Ticket #5297 (Interactive Environment - Support of conversion scripts) updated by
-
Owner changed
@perost, you may want to have a look at this. According to the … - 23:20 Ticket #5855 (*unknown* - Achieve successful simulation of 100% MSL 4.0.0 models) created by
- According to the current …
- 23:04 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) closed by
- fixed: Looks good. Thanks @Karim!
- 15:50 Ticket #5806 (Run-time - Initialization with homotopy and --daeMode does not generate ...) updated by
-
Cc, Status, Owner changed
- 15:30 Ticket #5852 (New Instantiation - getCommandLineOptions fails with newInst) updated by
- Yeah, we would need to load both *ModelicaBuiltin.mo files and have …
- 14:55 Ticket #5852 (New Instantiation - getCommandLineOptions fails with newInst) updated by
-
Cc changed
The issue is actually the call tosum,getCommandLineOptionsworks … - 14:01 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
- Running the file vial terminal with: …
- 13:44 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) updated by
-
Owner, Component changed
- 13:43 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) updated by
- Can you share a non-minimal example, also privately? Otherwise it's …
- 13:42 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) updated by
-
Status, Owner, Component, Milestone changed
- 13:41 Ticket #5852 (New Instantiation - getCommandLineOptions fails with newInst) updated by
-
Owner, Component, Milestone changed
- 12:41 Ticket #5854 (New Instantiation - NFConvertDAE.convertStateSelectAttribute got invalid StateSelect expression) created by
- I'm really sorry not to have a minimal example for this case, but the …
- 12:41 Ticket #5853 (FMI - -d=-disableDirectionalDerivatives Fails) created by
- Hello, i want to enable the directional derivates in generated FMU. …
- 09:51 Ticket #5848 (OMSens - OMSens only detects topmost parameters of models) updated by
- I have emailed Rodrigo waiting for updates
- 09:33 Ticket #5848 (OMSens - OMSens only detects topmost parameters of models) updated by
-
Owner, Component changed
- 09:32 Ticket #5852 (New Instantiation - getCommandLineOptions fails with newInst) created by
-
call to
getCommandLineOptionsfails when omc is called with … - 09:24 Ticket #5426 (Frontend - Compiler fails when model name is too long in OMEdit) updated by
- That could make it, but I'm not looking for solutions for me. I'm …
2020-02-17:
- 21:32 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
- See #5851
- 21:32 Ticket #5851 (Documentation - Add documentation about temp directory, working directory and ...) created by
- Please add a further section to …
- 20:23 Ticket #4886 (Build Environment - OMCompiler fails to build with lapack 3.8.0) updated by
- Ok, I just rebuilt lapack with deprecated symbols on, and OMC compiled …
- 19:30 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- I'm for it!
- 19:02 Ticket #5850 (New Instantiation - The NF gives an error while checking a perfectly legal model) created by
- Steps to reproduce: - load the PowerGrids library in OMEdit …
- 18:58 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
- Yes, that is because of …
- 18:25 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) created by
- This is a companion discussion to ticket #5841, and should be …
- 18:04 Ticket #5426 (Frontend - Compiler fails when model name is too long in OMEdit) updated by
- I just counted about 90 characters in the class name you reported …
- 17:26 Ticket #5426 (Frontend - Compiler fails when model name is too long in OMEdit) updated by
-
I'm already in
C:\workspace! I can't actually move any objection … - 16:58 Ticket #5847 (New Instantiation - Constant is used without having been given a value) updated by
-
FixedRotationcontains the record parameterR_relwhose binding … - 16:32 Ticket #5426 (Frontend - Compiler fails when model name is too long in OMEdit) updated by
- Replying to dariomangoni@…: > I'm back here because I hit …
- 16:22 Ticket #5847 (New Instantiation - Constant is used without having been given a value) updated by
-
Priority, Owner, Component, Milestone changed
Unit checking also fails when checking the model. I guess this is … - 16:19 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
- It seems like something goes wrong when handling either …
- 16:19 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
-
Last lines in
omeditcommands.mos: […] I guess the Windows … - 16:09 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
-
Replying to adeas31:
>
omeditcommunication.logfile is … - 16:03 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) updated by
- Replying to sjoelund.se: > You should never change …
- 16:01 Ticket #5846 (OMEdit - Omedit changes diagram appearance while dragging) updated by
-
Priority changed
The workaround is to enlarge the diagram extent instead. But I 100% … - 15:53 Ticket #5848 (OMSens - OMSens only detects topmost parameters of models) created by
- Consider the following model: […] The recently added OMSens plugin …
- 14:06 Ticket #5426 (Frontend - Compiler fails when model name is too long in OMEdit) updated by
- I'm back here because I hit the same issue again and I spent half a …
- 13:27 Ticket #5847 (New Instantiation - Constant is used without having been given a value) created by
- The initialization of parameters through function at initial algorithm …
- 13:00 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
-
omeditcommunication.logfile is always in … - 10:04 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) updated by
- https://github.com/OpenModelica/OpenModelicaBuildScripts/commit/185eb1c …
- 10:03 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) updated by
- You should never change dependencies on released packages. 1.15 branch …
- 09:20 Ticket #5846 (OMEdit - Omedit changes diagram appearance while dragging) created by
- to reproduce: - open …
- 08:58 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- https://github.com/modelica/ModelicaSpecification/issues/2495
- 08:24 Ticket #4886 (Build Environment - OMCompiler fails to build with lapack 3.8.0) updated by
- https://github.com/OpenModelica/OpenModelica/pull/734
- 07:07 Ticket #4886 (Build Environment - OMCompiler fails to build with lapack 3.8.0) updated by
- Ubuntu works fine with lapack 3.8.0. I guess it was built including …
2020-02-16:
- 21:11 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- Replying to adeas31: > It is not related to #5816 but I …
- 21:10 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
- Replying to adeas31: > This is the same issue as reported …
- 10:04 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
-
Description changed
- 06:42 Ticket #4886 (Build Environment - OMCompiler fails to build with lapack 3.8.0) updated by
- Any news? Gentoo user with lapack 3.8.0 Replying to [comment:4 …
2020-02-15:
- 19:01 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- It is not related to #5816 but I figured it out while working on the …
- 18:56 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) closed by
- duplicate: This is the same issue as reported in #5397 and #5575. @casella the …
- 17:13 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
-
Priority changed
Sorry, I missed the "Plotting Perspective part", now it's clear :) … - 16:22 Ticket #5845 (FMI - FMU export not creating UnitDefinitions section in ModelDescription.xml) updated by
-
Summary changed
- 16:19 Ticket #5845 (FMI - FMU export not creating UnitDefinitions section in ModelDescription.xml) updated by
-
Priority, Milestone changed
We are currently trying to improve FMI export, this should be an easy … - 16:17 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- @adeas31, I guess this is related to #5816, right? Is it possible …
- 16:15 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- Seriously, we should check with DS first. There are other tools than …
- 15:36 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- @#%&@@!!!
- 09:13 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
-
Description changed
- 09:08 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
- I'm going to attach a pdf with screenshots. In reality, there is even …
2020-02-14:
- 23:58 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- @casella open the attached model in Dymola and OM. The diagram looks …
- 22:59 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
- Replying to ceraolo: > Unfortunately, this bounding …
- 19:41 Ticket #5845 (FMI - FMU export not creating UnitDefinitions section in ModelDescription.xml) created by
- See https://github.com/CATIA-Systems/FMPy/issues/113 When I export an …
- 18:50 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) updated by
-
Status, Cc, Component, Priority, Milestone, Owner changed
This is quite bad, we'll try to fix it for 1.15.0 or in a second … - 18:38 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) updated by
-
Milestone changed
- 18:36 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) reopened by
- Thank you @sjoelund.se! Would you mind pushing this also to the …
- 16:57 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- Dymola again does the the non standard: let's rotate with origin as …
- 15:51 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
- I didn't. Just delayed ;)
- 15:30 Ticket #5844 (Interactive Environment - Repeated OMEditor Crashes) created by
- OpenModelica Connection Editor crashes every time Modelica.Media.Air …
- 14:49 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) closed by
- fixed: https://github.com/OpenModelica/OpenModelicaBuildScripts/commit/9d5bc60 …
- 14:44 Ticket #5843 (Run-time - Make sure daeMode works in a reliable way) created by
-
--daeModewas introduced several years ago, particularly to … - 14:35 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) created by
- When installing OpenModelica from scratch on Ubuntu, MSL v. 3.2.2 is …
- 14:07 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) updated by
- OK, sounds good. I'm just trying to avoid the number of open tickets …
- 14:00 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) updated by
- @ceraolo, you forgot the attachment :)
- 13:59 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
- @adeas31, the Modelica Specification …
- 13:59 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) updated by
- Replying to casella: > Replying to [comment:2 …
- 13:54 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) updated by
- Replying to dariomangoni@…: Please close the ticket …
- 11:30 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) updated by
- Replying to dariomangoni@…: > I might put this as issue …
- 11:27 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) updated by
- Oh, nice! I was not aware of these different restrictions on different …
- 10:58 Ticket #5841 (OMEdit - Erroneous bounding rectangle and starting size of Diagram window size) created by
- When showing, in Plotting Perspective, a diagram in the diagram …
- 10:52 Ticket #5840 (Interactive Environment - Don't return origin if not defined) updated by
-
Status, Owner changed
- 10:51 Ticket #5840 (Interactive Environment - Don't return origin if not defined) created by
-
Right now we return
{0, 0}when fetching icon or diagram annotation … - 10:49 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) updated by
-
The issue is that
smallRotationis declared as: […] I'm unsure if … - 10:07 Ticket #5839 (OMEdit - Plotting curves with toggled sign) updated by
-
Description changed
- 08:50 Ticket #5839 (OMEdit - Plotting curves with toggled sign) created by
- Currently, OMEdit does not allow plotting mathematical elaboration of …
2020-02-13:
- 23:43 Ticket #5838 (Frontend - Unexpected type mismatch for smallRotation) created by
- at OpenModelica v1.16.0-dev-120-g0c802bd99 smallRotation compiles …
Note:
See TracTimeline
for information about the timeline view.
