Timeline
2021-03-01:
- 22:01 Ticket #6391 (Build Environment - Use dynamic linking to speed up compilation in Windows) closed by
- fixed: Tested this with OMC 1.17.0-dev.beta2 on Windows 10 64 bit, works fine.
- 21:40 Ticket #6398 (OMPlot - OMPlot save to SVG does not properly escape text in Title) updated by
-
Milestone changed
- 20:59 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- The build gets pretty far, and ends with this in the log: […] The …
- 19:37 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- PR https://github.com/OpenModelica/OpenModelica/pull/7246 fixes the …
- 15:55 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- I was curious and just tried to build 1.18.0-dev-108 and it fails …
- 15:23 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- No, master is 1.18.0-dev (nightly-builds). My plan is to integrate my …
- 15:20 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- Let me know if you would like me to try other builds. Is the master …
- 15:17 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- I haven't yet ported any of my fixes to the maintenance/v1.16 branch. …
- 14:37 Ticket #6199 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
-
Cc changed
@Karim reports that this model ended up in an "obsolete" package in … - 14:28 Ticket #6267 (Backend - Avoid bad scalarization of parameter bindings) updated by
- @Karim currently working on that
- 13:47 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- I'm still getting an error when I try to build 1.16.4_0. For most of …
- 12:22 Ticket #6398 (OMPlot - OMPlot save to SVG does not properly escape text in Title) created by
- How to reproduce: - OMEdit 1.16.2 - Create A plot with any signal - …
- 11:31 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- OM v1.17.0-dev.beta3 is building now. Will be available in a couple of …
- 10:00 Ticket #6199 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
- The information for this specific model would be: […] There could …
- 09:49 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- Changed version to 1.17.0-dev.beta3: …
- 09:42 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- PR https://github.com/OpenModelica/OpenModelicaSetup/pull/16 fixes the …
- 09:34 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- We needed to also update the libraries as by default MSL 4.0.0 was not …
- 09:00 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- 1.17.0-beta.2 for Windows does not include MSL 4.0.0 in the installer.
- 08:41 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Tested successfully in v1.17.0-dev.beta2 (64-bit) on Windows 10
- 08:37 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Tested successfully with v1.17.0-dev.beta2 (64-bit) under Windows 10.
- 08:07 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- There are still some issues with rpaths but at least now all stuff can …
- 01:19 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- Solved the problem from #6215 by cmake configuring sundials with …
2021-02-28:
- 22:09 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- @christiankral, the idea of 1.16.2 was to fix a couple of critical …
- 22:01 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to Stephan F.: > I just upgraded to the latest …
- 18:32 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- From ticket #6215 and the comments in PR …
- 18:24 Ticket #6215 (*unknown* - OMEdit fails to simulate) closed by
- duplicate: Let's continue the discussion on #6306.
- 16:14 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Hmm, it should not happen on any combination. I will check.
- 16:12 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Yes, only to 1.17.
- 14:09 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Note that "Enable Replaceables Support" requires to restart OMEdit.
- 10:37 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- @casella Do I understand correctly that this bug fix is not back …
- 06:39 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- I just upgraded to the latest nightly build 1.18.0~dev-49-gc5c5e43 and …
2021-02-27:
- 19:24 Ticket #6397 (Testing Framework - Simulations with -lv vendor annotation fail in the testsuite) created by
- All simulations in …
- 18:49 Ticket #6199 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
- @Karim, it would be nice to have a bit more output besides the …
- 18:31 Tickets #2926,4372,5574,5577,5669,5720,5799,6029,6052,6147,5868 batch updated by
-
Milestone changed
Retargeted to 1.18.0 after 1.17.0-dev.beta2 release - 18:19 ReleaseNotes/1.17.0 edited by
- (diff)
- 17:56 ReleaseNotes/1.16.4 edited by
- (diff)
- 17:55 ReleaseNotes/1.16.5 created by
- 17:54 ReleaseNotes/1.16.4 edited by
- (diff)
- 17:52 ReleaseNotes/1.17.0 edited by
- (diff)
- 17:51 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
-
Cc changed
- 17:47 ReleaseNotes/1.17.0 edited by
- (diff)
- 17:47 ReleaseNotes/1.17.0 edited by
- (diff)
- 17:42 ReleaseNotes/1.17.0 edited by
- (diff)
- 17:40 ReleaseNotes/1.17.0 edited by
- (diff)
2021-02-26:
- 23:47 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- Replying to AnHeuermann: > Now I'm testing the tests …
- 23:44 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- Replying to AnHeuermann: > We are very precise and only …
- 23:37 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- Replying to AnHeuermann: > >In principle we should, …
- 21:19 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- use gfind instead of find as we need symbolic links as well (one would …
- 20:40 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
- From previous email discussion, don't care about macports update, do …
- 20:37 Ticket #6306 (Build Environment - OpenModelica fails to build on MacOS) updated by
-
Cc, Description, Summary changed
hkiel has fixed some of the issues via PR: … - 17:18 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- > I'll fix the first one Done. That was kinda easy... But I musst …
- 16:19 Milestone 1.16.5 completed
- Hopefully last fix for 1.16.x
- 16:09 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- So now I have mostly finished the implementation of the …
2021-02-25:
- 21:03 ReleaseNotes/1.17.0 edited by
- (diff)
- 19:49 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- There is a [https://github.com/OpenModelica/OpenModelica/pull/7231 …
- 19:41 Ticket #6396 (Run-time - Fix FFI on Windows/mingw) closed by
- fixed
- 19:39 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) closed by
- fixed: PR https://github.com/OpenModelica/OpenModelica/pull/7229 does it.
- 19:28 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) closed by
- fixed
- 19:22 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- Yeah so -70 is intentional since the algorithm prefer expand over …
- 19:20 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- The extent chosen by the button with RL.mo is Left-Right: -70, 80 A …
- 19:03 Ticket #6192 (Third-Party Libraries - Several ChillerCooled models in Buildings fail during initialization) closed by
- fixed: After fixing #6203, the first example simulates successfully. The …
- 19:01 Ticket #6192 (Third-Party Libraries - Several ChillerCooled models in Buildings fail during initialization) updated by
-
Description changed
- 19:00 Ticket #6195 (Run-time - Assert triggered incorrectly on variable computed with conditional ...) updated by
-
Description changed
- 18:59 Ticket #6194 (Run-time - Issue with chattering involving arrays in the Buildings library) updated by
-
Description changed
- 18:58 Ticket #6207 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
-
Description changed
- 18:56 Ticket #6200 (Backend - Issues with redundant initial conditions in Buildings model?) updated by
-
Description changed
- 18:55 Ticket #6199 (Backend - Mixed under/overdetermined initialization problem in Buildings) updated by
-
Description changed
- 18:55 Ticket #6198 (Backend - Index reduction issue in Buildings: the backend tries to differentiate ...) updated by
-
Description changed
- 18:53 Ticket #6196 (Backend - Undetected high-index DAE or incorrectly handled overdetermined ...) updated by
-
Description changed
- 18:53 Ticket #6190 (Backend - Issue with homotopy and Pantelides during initialization in Buildings) updated by
- After #6203 was fixed, we get a slightly different error output […]
- 18:49 Ticket #6190 (Backend - Issue with homotopy and Pantelides during initialization in Buildings) updated by
-
Description changed
- 18:48 Ticket #6095 (Backend - Bogus accounting of (discrete?) equations and variables in Buildings) updated by
-
Description changed
- 18:47 Ticket #6221 (New Instantiation - The NF ignores a redeclare statement in a record containing a ...) updated by
-
Description changed
- 18:46 Ticket #6206 (New Instantiation - The NF fails to evaluate expression in Buildings library) updated by
-
Description changed
- 18:38 Ticket #6208 (New Instantiation - The NF does not recognize record of parameters as a parameter itself) updated by
-
Description changed
- 18:37 Ticket #6203 (New Instantiation - Some parameters seem to be never assigned in Buildings models) updated by
- Excellent! I just updated the link in the ticket to point to the …
- 18:35 Ticket #6203 (New Instantiation - Some parameters seem to be never assigned in Buildings models) updated by
-
Description changed
- 18:32 Ticket #6193 (New Instantiation - NFFlatten.flatten fails in Buildings models) updated by
-
Description changed
- 18:31 Ticket #6188 (New Instantiation - NF Type mismatch in Buildings model involving redeclared class) updated by
-
Description changed
- 18:31 Ticket #5991 (New Instantiation - NF cannot evaluate structural parameter during NFTyping.typeComponents) updated by
-
Description changed
- 18:30 Ticket #5988 (New Instantiation - NF fails with no error message during NFTyping.typeComponents when ...) updated by
-
Description changed
- 18:29 Ticket #5988 (New Instantiation - NF fails with no error message during NFTyping.typeComponents when ...) updated by
-
Description changed
- 18:29 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) closed by
- fixed: Done, PR https://github.com/OpenModelica/OpenModelica/pull/7219
- 18:15 Ticket #6203 (New Instantiation - Some parameters seem to be never assigned in Buildings models) closed by
- fixed: Fixed in f92fb52, see …
- 18:12 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- Replying to adrpo: > My suggestion is to add …
- 17:35 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- My suggestion is to add -Wparentheses-equality to the CFLAGS.
- 17:34 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- We could change the color of stderr but this basically happens in any …
- 15:29 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- Replying to AnHeuermann: > We now have a …
- 15:06 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) updated by
- I think that we can close this ticket as no libraries are installed by …
- 15:01 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- Replying to adeas31: > 1 is not possible. OMEdit reads the …
- 14:47 Ticket #6396 (Run-time - Fix FFI on Windows/mingw) updated by
- PR https://github.com/OpenModelica/OpenModelica/pull/7226
- 13:48 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- This is because for example the number 34 is always expanded to 40 and …
- 13:28 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- Replying to adeas31: > I guess is possible to go for full …
- 13:18 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- We now have a spatialDistribution operator that can handle a fairly …
- 11:52 Ticket #6396 (Run-time - Fix FFI on Windows/mingw) updated by
-
Status, Owner changed
- 11:52 Ticket #6396 (Run-time - Fix FFI on Windows/mingw) created by
- The new function evaluation via foreign function interface does not …
- 10:14 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- I guess is possible to go for full square. The only good and safe …
- 10:10 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- 1 is not possible. OMEdit reads the stdout (printed in black) and …
2021-02-24:
- 19:55 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- Replying to adrpo: > clang wants them gone, gcc warns …
- 19:37 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) updated by
- clang wants them gone, gcc warns about ambiguity and suggest to add …
- 18:34 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- good improvement! For me there is just a final polishing recommended: …
- 16:32 Ticket #6395 (OMEdit - Some generated C code shows up in red in OMedit) created by
-
Simulate model
Modelica.Blocks.Examples.Filter. Some red C code … - 15:44 Ticket #6391 (Build Environment - Use dynamic linking to speed up compilation in Windows) updated by
- Yes. Is in the queue to be ported to 1.17 already, I have a small fix …
- 15:43 Ticket #6391 (Build Environment - Use dynamic linking to speed up compilation in Windows) updated by
- Just tried this feature on the latest Windows nightly, it is really …
- 15:35 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Replying to adrpo: > Please add the changes in PR 7218 to …
- 15:31 Ticket #5240 (New Instantiation - NFEvalFunction.evaluateExternal is not yet implemented) updated by
- LGTM.
- 15:29 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- Replying to AnHeuermann: > @casella I'm happily coding …
- 14:21 Ticket #6331 (New Instantiation - [NF] Assigning parameters by external functions) updated by
- #5240 is now mostly fixed, see my comment on …
- 14:18 Ticket #5240 (New Instantiation - NFEvalFunction.evaluateExternal is not yet implemented) updated by
- Evaluating external functions in shared libraries via libffi is now …
- 13:57 Ticket #5281 (Run-time - Add support for spatialDistribution) updated by
- @casella I'm happily coding away on the runtime code and I need some …
- 12:01 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- In the meantime I'll make a new 1.18.0-dev nightly and test it
- 11:29 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Please add the changes in PR 7218 to PR 7216 and make a new one for …
- 11:27 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Tested [https://github.com/OpenModelica/OpenModelica/pull/7218 PR …
- 10:36 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- See PR 7211 …
- 10:32 Ticket #6145 (*unknown* - Schedule for the 1.17.0 release) updated by
- Final check list for 1.17.0: - #6307 (Icons scrambled up because of …
- 10:29 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- See also [https://github.com/OpenModelica/OpenModelica/pull/7216 PR …
- 10:28 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
-
If OMEdit did not set
-d=nfAPIsince the setting was moved on … - 10:24 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
-
Milestone changed
- 10:19 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Please port to maintenance/1.17
- 10:14 Ticket #5914 (OMSens - OMSens dependencies as a part of OMEdit installation) closed by
- fixed: As I understand, OMSens is now integrated in 1.17.0. There are issues …
- 09:59 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Yes. See PR#7217.
- 09:47 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Very good! Does this mean we need to push it to 1.16.5? I guess so…
- 08:24 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- This should be fixed with …
- 08:00 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- The values are rounded at 10. @cerelo I pushed in a change yesterday …
- 01:00 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- Replying to ceraolo: > Replying to casella: …
2021-02-23:
- 23:09 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- Replying to casella: > An integer number is not good …
- 22:49 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- An integer number is not good enough, we should use a multiple of the …
- 22:34 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- OK, good luck with that!
- 22:28 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- I haven't done any filtering yet but yes the flag move might be …
- 21:35 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- For asymmetric.png OMEdit has chosen the following data: Left: -150 …
- 21:01 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- I can reproduce this on master with Windows. As far as I debugged it …
- 20:32 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- @adrpo, could some of your latest fixes to 1.16.4 have risen such an issue?
- 20:31 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- OMG. Yet another size_t issue?
- 17:55 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Replying to casella: > @openmodelica, I tried it on the …
- 17:44 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) closed by
- fixed
- 17:24 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
- Selecting Parameters inside the …
- 17:10 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) updated by
-
Cc, Status, Owner changed
@openmodelica, I tried it on the latest Windows nightly and it works … - 17:03 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- Replying to adrpo: > I tried to reproduce this from …
- 17:02 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- I don't get it either. @ceraolo, which thicker lines are you referring …
- 16:58 Ticket #6394 (OMEdit - Selecting Parameters causes ThreeTanks to hang with "Enable ...) created by
- I updated to the daily build this morning and found that selecting …
- 16:47 Ticket #6371 (FMI - Modelica_Synchronus FMUs not working) updated by
- Oh yes! Unfortunately, this reports shows the combined effects of 8 …
- 16:45 Ticket #6363 (*unknown* - MSL 4.0.0 including Clocked supported by OM 1.16.2?) updated by
-
Priority changed
- 16:40 Ticket #6363 (*unknown* - MSL 4.0.0 including Clocked supported by OM 1.16.2?) updated by
-
Status, Owner changed
- 16:33 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- I tried to reproduce this from command line and have no luck, it just …
- 15:10 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- I didn't quite get it. The thicker lines are aligned to (0,0). Do you …
- 13:53 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
-
Cc, Status, Owner changed
Replying to casella: > Probably related to #6348. … - 13:51 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Replying to casella: > #5799 is probably due to the same …
- 13:48 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Checked after merging PR 7207 on v1.18.0-dev-74-gc28aeab1dd (64-bit) …
- 13:06 Ticket #6371 (FMI - Modelica_Synchronus FMUs not working) updated by
- Seems a lot of FMUs with clocked are now working: …
- 12:28 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
- Replying to sjoelund.se: > It should have said `E: Unmet …
- 12:13 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- I've checked, and now it works basically as expected. There is still …
- 12:11 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
- No, it's the proper fix. The problem is we had one version of the …
- 11:53 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
- Replying to sjoelund.se: > It should have said `E: Unmet …
- 09:02 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
-
It should have said
E: Unmet dependencies. Try using -f.or similar … - 08:57 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
-
Component changed
- 08:57 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
-
Status, Owner changed
- 08:56 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
- Could be related to …
- 07:56 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) updated by
-
Owner, Component, Summary changed
any news?
2021-02-22:
- 22:40 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- PR testing now: https://github.com/OpenModelica/OpenModelica/pull/7207
- 21:53 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
-
Owner changed
- 21:45 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Great! This was actually a quite nasty bug... #5799 is probably due …
- 21:43 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- Probably related to #6348.
- 21:42 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Yes, I'm working on a PR right now.
- 21:41 Ticket #6145 (*unknown* - Schedule for the 1.17.0 release) updated by
-
Priority, Status, Owner changed
There was some delay due to critical issues that had to be resolved, … - 21:36 Ticket #6145 (*unknown* - Schedule for the 1.17.0 release) updated by
-
Milestone changed
- 21:34 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Do you know all the places in the code generator where this pattern is …
- 21:32 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Not everywhere. The problem is *only* with variable arguments list …
- 21:32 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
-
Cc changed
Adding @sjoelund.se in cc:, maybe he's got some ideas - 21:28 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Well, this is the reason why I want to do modelling in Modelica and …
- 21:27 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Oh. My. God. Do you mean we should explicitly cast all of those …
- 21:24 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- The problem is like this: […] Changing the first line to: […] …
- 21:22 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Interesting :) 13836186197161934851 = …
- 21:00 Ticket #6379 (OMEdit - Handling libraries in 1.17.0) updated by
- Update after today's webmeeting: the problem with the installer doing …
- 20:09 Ticket #6348 (Frontend - Simulation works in Linux but not Windows) updated by
- Something really bad happens here, I get in gdb: {{{nr_of_elements = …
- 16:16 ReleaseNotes/1.17.0 edited by
- (diff)
- 12:03 Ticket #5849 (OMEdit - Automatic elimination of blank areas in diagrams (companion to #5841)) updated by
- Yeah I see the button behavior was not perfect. I tried to improve it …
- 07:20 Ticket #6393 (Installation program - Nightly build broken - Error during update of libomcsimulation) created by
- Updating the nightly build today I got the following error: […] …
Note:
See TracTimeline
for information about the timeline view.
