Timeline
2013-11-18:
- 15:15 Ticket #2477 (OMEdit - Icon snap to grid function) updated by
- When will this feature be added? For me this is very important - …
- 14:00 Ticket #2485 (Frontend - Redeclaration interpreted wrong with array dimensions) updated by
-
Status, Owner changed
Yeah, we probably do not use the dimensions from the original … - 13:58 Ticket #2485 (Frontend - Redeclaration interpreted wrong with array dimensions) updated by
-
Owner, Component changed
- 13:43 Ticket #2485 (Frontend - Redeclaration interpreted wrong with array dimensions) created by
- The following testcase is legal (according to section 7.3 of the …
- 12:41 Ticket #2482 (Backend - OMEdit hangs on a model check) updated by
-
Cc, Owner, Component changed
Stack overflow fixed in r18167. checkModel now works and reports that … - 11:05 Ticket #2480 (Run-time - Documentation of integration algorithms) updated by
- The following integration algorithms are available using the …
- 07:20 Ticket #2475 (OMEdit - FMU-export / bug at handover from top-level to low-level) updated by
- On further tests i found out, that other parameter …
2013-11-17:
- 15:18 Ticket #2483 (Frontend - function call with multiple output) updated by
-
Replying to sjoelund.se:
> Do
omc ++vorgetVersion()… - 14:28 Ticket #2483 (Frontend - function call with multiple output) updated by
-
Do
omc ++vorgetVersion()to check the exact revision of omc you … - 14:05 Ticket #2483 (Frontend - function call with multiple output) updated by
- function add input Integer a; input Integer b; output Integer …
- 13:39 Ticket #2483 (Frontend - function call with multiple output) updated by
- Could you show a more complete example? Because the following does …
- 13:29 Ticket #2483 (Frontend - function call with multiple output) updated by
- Even after installing the latest nightly build, i still get the same …
- 11:46 Ticket #2484 (New Instantiation - Expandable connector resolution misses components) updated by
-
Status, Owner changed
- 11:34 Ticket #2484 (New Instantiation - Expandable connector resolution misses components) created by
- The following model is fine in Dymola (and AFAIK according to the …
- 11:32 Ticket #2385 (New Instantiation - Missing variable declarations in instantiated model when using ...) updated by
- This might be something for your test suite: […] Results in …
2013-11-15:
- 19:58 Ticket #2483 (Frontend - function call with multiple output) updated by
- r18159 fixes this for algorithms, but not equations.
- 18:06 Ticket #2483 (Frontend - function call with multiple output) updated by
-
Status, Owner changed
- 17:56 Ticket #2483 (Frontend - function call with multiple output) updated by
-
Component changed
- 17:56 Ticket #2483 (Frontend - function call with multiple output) updated by
-
Description changed
- 17:40 Ticket #2482 (Backend - OMEdit hangs on a model check) updated by
-
Component changed
Caught in the following cycle: […] - 16:53 Ticket #2250 (OMEdit - Support DisplayUnit and unit conversion for parameter input in OMEdit) updated by
- r18156 added an API call that can convert between units (returns the …
- 16:48 Ticket #2482 (Backend - OMEdit hangs on a model check) updated by
- No. The thing is omc catches the stack overflow but it doesn't return …
- 16:08 Ticket #2482 (Backend - OMEdit hangs on a model check) updated by
- I tried also a checkModel() and it also returns a stack overflow... …
- 15:27 Ticket #2482 (Backend - OMEdit hangs on a model check) updated by
-
Cc, Owner, Component changed
Have you tried the check model from the command line? The CLI also … - 15:01 Ticket #2483 (Frontend - function call with multiple output) created by
- […] if i want to get just the multiplication part of the result …
- 14:56 Ticket #2482 (Backend - OMEdit hangs on a model check) created by
- When I try to check my model in OMEdit, the program hangs forever …
- 12:28 Ticket #2463 (Backend - Error when removing simple equations for a simple model) updated by
- I think in this case the equations should just pass since they are …
2013-11-14:
- 21:25 Ticket #2140 (Backend - Enable Tearing by default) updated by
- I think the fact that …
- 17:54 Ticket #2476 (Backend - 18121 won't build on Mac) updated by
- Could be. Although it is odd that I repeatedly could not build 18121. …
- 17:05 Ticket #2466 (Backend - Over-determined system) updated by
- Thank you for your interesting information, which I am contemplating. …
- 16:46 Ticket #2476 (Backend - 18121 won't build on Mac) updated by
- I think there is no change and just a race condition with some …
- 16:37 Ticket #2466 (Backend - Over-determined system) updated by
- Replying to nimalk@…: > Meanwhile, could you please tell …
- 16:23 Ticket #2466 (Backend - Over-determined system) updated by
- Thank you for your urgent response. Since the model can be built and …
- 16:11 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) created by
- OMEdit allows to specify the tolerance and number of intervals for the …
- 16:02 Ticket #2476 (Backend - 18121 won't build on Mac) closed by
- fixed: I tried again with 18135 and now it does build. So, it seems that …
- 15:49 Ticket #2480 (Run-time - Documentation of integration algorithms) updated by
-
Cc changed
- 15:48 Ticket #2480 (Run-time - Documentation of integration algorithms) updated by
-
Status, Component changed
- 15:41 Ticket #2480 (Run-time - Documentation of integration algorithms) created by
- The available integration algorithms in OMC are very poorly …
- 15:01 Ticket #2466 (Backend - Over-determined system) updated by
- Yes, this is a case of wrong equation counting. Probably some …
- 14:52 Ticket #2466 (Backend - Over-determined system) updated by
- Note that we've had the same problem for some time in the standard …
- 14:12 Ticket #2479 (OMEdit - adapt icon after redeclaration within an extends clause) created by
- I have a model like this: model A extends Partial_A(redeclare B b); …
- 10:38 Ticket #2474 (Interactive Environment - Problem in modifying / saving Modelica code in OMEdit) updated by
- Comments like […] are removed after saving.
- 10:35 Ticket #2474 (Interactive Environment - Problem in modifying / saving Modelica code in OMEdit) updated by
- I experienced comparable issues. Comments ("") are removed after …
- 10:27 Ticket #2478 (OMEdit - OMEdit: Undo function) updated by
-
Summary changed
- 10:26 Ticket #2478 (OMEdit - OMEdit: Undo function) created by
- Hi! Can you please implement an undo function for the graphical …
- 10:18 Ticket #2477 (OMEdit - Icon snap to grid function) updated by
-
Status, Owner, Component changed
- 09:13 Ticket #2477 (OMEdit - Icon snap to grid function) created by
- Hi! In OMEdit it would be wonderful to have a "snap to …
2013-11-13:
- 17:36 Ticket #2474 (Interactive Environment - Problem in modifying / saving Modelica code in OMEdit) updated by
-
Cc, Owner, Component changed
Adrian - another list API issue :). - 16:13 Ticket #2476 (Backend - 18121 won't build on Mac) updated by
- Just to make it a bit easier to view, here is the end of the log file: …
- 16:07 Ticket #2476 (Backend - 18121 won't build on Mac) created by
- I tried an upgrade from 18093 to 18121 and it fails. I deactivated …
- 14:31 Ticket #2475 (OMEdit - FMU-export / bug at handover from top-level to low-level) created by
- Hello, I am using the nighlty build of OMEdit. While exporting a …
- 09:55 Ticket #2474 (Interactive Environment - Problem in modifying / saving Modelica code in OMEdit) updated by
- One additional comment: I modified the previously attached sample file …
- 09:36 Ticket #2474 (Interactive Environment - Problem in modifying / saving Modelica code in OMEdit) created by
-
I attached a model which calculates the inductances
L11,L22and …
2013-11-12:
- 22:49 Ticket #2255 (OMEdit - Units in plot windows are missing) updated by
- Ah, this is also possible. But I have to re-structure some of the code …
- 21:19 Ticket #2174 (Frontend - Allow for modifiers in translateModel() and simulate() API functions) updated by
- I'll be taking care of this.
- 21:19 Ticket #2174 (Frontend - Allow for modifiers in translateModel() and simulate() API functions) updated by
-
Status, Owner changed
- 19:17 Ticket #2255 (OMEdit - Units in plot windows are missing) updated by
- I am glad do see units, values and descriptions added to the variable …
- 12:50 Ticket #2464 (Backend - SimVar generation) closed by
- invalid: numArrayElement should not used for the dimension of the a array, it …
- 12:43 Ticket #2466 (Backend - Over-determined system) updated by
- Replying to lochel: > Check model counts only the …
2013-11-11:
- 18:01 Ticket #2472 (Run-time - non-linear solver issues after ExpressionSimplify changes) updated by
-
Cc changed
- 15:48 Ticket #2473 (Backend - FMU Export Option 32bit/64bit version) updated by
- The first thing you would then need to do is setup all the makefiles …
- 15:31 Ticket #2472 (Run-time - non-linear solver issues after ExpressionSimplify changes) updated by
-
Cc changed
- 15:18 Ticket #2473 (Backend - FMU Export Option 32bit/64bit version) created by
- Currently we just generate a FMU with that bit version that compiler …
- 15:06 Ticket #2472 (Run-time - non-linear solver issues after ExpressionSimplify changes) created by
- Hi, after the removal of the cases: (a+b)c1 => ac1+bc1 and (a-b)c1 …
- 08:52 Ticket #2471 (Run-time - Add check if variable can be changed via -override*) created by
- Currently we do not check if a variable can be changed via -override* …
Note:
See TracTimeline
for information about the timeline view.
