Timeline
2014-11-08:
- 07:58 Ticket #2971 (*unknown* - Translation hangs) updated by
- Which version of OMC are you running and would it be possible for us …
- 01:49 Ticket #2906 (OMEdit - Enumeration parameter input by drop-down menu) closed by
- fixed: Done in r23278. Suggestion 1: There is drop-down menu now. Suggestion …
2014-11-07:
- 22:20 Ticket #2971 (*unknown* - Translation hangs) created by
- Models that I was able to run in previous versions are now hanging …
- 17:47 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) closed by
- fixed
- 17:47 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) updated by
-
Status, Owner changed
- 17:47 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) reopened by
- 16:54 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) updated by
- Replying to sjoelund.se: > Slowest test 406.324s …
- 16:16 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) updated by
- Replying to perost: > Unfortunately it doesn't seem to …
- 15:49 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) closed by
- fixed
- 15:49 Ticket #2947 (Backend - Performance issues with BackendVariable.mergeVariables) updated by
- Fixed in r23275. Previous performance for the 4-bit adder as reported …
- 12:32 Ticket #2970 (*unknown* - 0/0 = ?) updated by
- Replying to vwaurich: > Replying to lochel: > …
- 12:26 Ticket #2970 (*unknown* - 0/0 = ?) updated by
- Replying to lochel: > see also #2633 Thanks for the hint. …
- 12:20 Ticket #1760 (OMEdit - Line number don't match error messages in OMEdit) updated by
- If I may add the experience of a new (Open)Modelica user here: The …
- 12:15 Ticket #2970 (*unknown* - 0/0 = ?) updated by
- see also #2633
- 12:06 Ticket #2970 (*unknown* - 0/0 = ?) updated by
- Ok. But in the ThermoSysPro model I mentioned, the solver step is not …
- 11:51 Ticket #2676 (OMEdit - OMEdit can't manage new files in package in separate files) updated by
- I just wanted to report the same bug (using r23143), fortunately I …
- 11:51 Ticket #2676 (OMEdit - OMEdit can't manage new files in package in separate files) updated by
- I just wanted to report the same bug, fortunately I found this …
- 11:40 Ticket #2970 (*unknown* - 0/0 = ?) updated by
- Note that omc returns successfully for that model. Probably because it …
- 11:38 Ticket #2970 (*unknown* - 0/0 = ?) updated by
- Well. Anything returning NaN (or inf, or -inf) should trigger an assertion.
- 11:19 Ticket #2970 (*unknown* - 0/0 = ?) created by
- Hi, Of course, the answer is that the solution of 0/0 is not defined …
- 01:08 Ticket #2969 (Backend - differentiate delay expr) created by
- Differentiation of delay expression is not implementet, yet. All …
- 00:18 Ticket #1228 (Backend - Backend fails on when equations) closed by
- fixed: fixed in r23260.
2014-11-06:
- 17:55 Ticket #2968 (MetaModelica - Function pointers are not checked for being assigned before use) closed by
- fixed
- 17:55 Ticket #2968 (MetaModelica - Function pointers are not checked for being assigned before use) updated by
- Fixed in r23252.
- 17:16 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) closed by
- fixed: Done in r23249. Added interface for following dassl flags, - …
- 17:07 Ticket #2968 (MetaModelica - Function pointers are not checked for being assigned before use) created by
- This function currently segfaults without any error from the compiler: …
- 14:03 Ticket #2190 (New Instantiation - Rename / Copy features missing in OMEdit) updated by
-
In r23234 I have added a new
copyClassAPI. It doesn't check any … - 11:12 Ticket #2965 (Frontend - Information about "outer output" declarations needed in backend for ...) updated by
- Hm. The inner outer attributes are lost in the backend …
- 07:47 Ticket #2967 (Backend - Pantelides fails for arrays) created by
- Pantelides fails for the following models using arrays: […] […]
- 02:34 Ticket #2390 (OMEdit - Fully support showStartAttribute in OMEdit) updated by
- In r23224, I have added some support for showStartAttribute. But I …
- 02:32 Ticket #2966 (Interactive Environment - setComponentModifierValue can't set a two level modifier) updated by
-
Description changed
- 02:26 Ticket #2966 (Interactive Environment - setComponentModifierValue can't set a two level modifier) created by
- Creating a two level modifier produces a wrong code, […] However, …
2014-11-05:
- 21:42 Ticket #2878 (Run-time - compiled model crashes for some integration times) closed by
- fixed: fixed in r23223.
- 21:40 Ticket #2878 (Run-time - compiled model crashes for some integration times) updated by
-
Status changed
- 21:00 Ticket #2965 (Frontend - Information about "outer output" declarations needed in backend for ...) updated by
- Can't you just add this information to the DAE.Var in InstDAE.daeDeclare?
- 20:58 Ticket #2945 (Backend - Translation error) updated by
- If the model is proprietary, if you want, you could send it to us …
- 20:26 Ticket #2945 (Backend - Translation error) updated by
- I just built 23219, and I see the same results. It gives that error, …
- 18:47 Ticket #2965 (Frontend - Information about "outer output" declarations needed in backend for ...) created by
- MLS 3.3, "17.3.5 Merging Variable Definitions" requires to merge …
- 18:20 Ticket #2945 (Backend - Translation error) updated by
- Replying to Adam Dershowitz <dersh@…>: > I just upgraded …
- 18:17 Ticket #2951 (Backend - Failing MSL31 model with Cellier Tearing) closed by
- fixed: It's fixed, I guess in r23216.
- 18:13 Ticket #2867 (Backend - Generation of symbolic jacobians fail) closed by
- fixed: fixed in r23216.
- 15:30 Ticket #2946 (Run-time - events are treated badly) updated by
- Replying to casella: > My understanding is that this kind …
- 15:19 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- Replying to adeas31: > Yes, the cached information is only …
- 15:15 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- Replying to casella: > Replying to adeas31: > …
- 11:18 Ticket #2867 (Backend - Generation of symbolic jacobians fail) updated by
- The symbolic jacobian fails rightly, since the tearing is wrong and …
- 11:18 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- Replying to casella: > I see. But it should be possible to …
- 10:47 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- Replying to sjoelund.se: > While OMC may be able to handle …
- 10:01 Ticket #2964 (New Instantiation - Report error when modifying final parameter) updated by
-
Status, Component changed
This is both a front-end and back-end error on OMC's behalf (front-end … - 09:42 Ticket #2964 (New Instantiation - Report error when modifying final parameter) created by
-
Model
Bbelow modifies a final parameter inA, but validates fine: … - 09:03 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- While OMC may be able to handle multi-threading, the CORBA interface …
- 09:03 Ticket #2963 (*unknown* - Assert within Initial Equation triggers during simulation) created by
- Hi everyone, find attached an example where an assert within an …
- 08:57 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- Replying to adeas31: > 197 commands.......really??? well …
- 07:07 Ticket #2392 (OMEdit - "OMEdit – Component Parameters" view should indicate default values) closed by
- fixed: Fixed in r23198.
- 06:43 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- 197 commands.......really??? well actually yes but we don't need a lot …
- 06:37 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 06:36 Ticket #2956 (OMEdit - Moving a complete model disassembles everything) updated by
-
Summary changed
- 02:43 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- I have also tested the case of dragging ClosedVolume onto a new model. …
- 01:53 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) updated by
- I have tried the same on my HP Elitebook 8560p, i7-2620M CPU, running …
2014-11-04:
- 16:20 Ticket #2946 (Run-time - events are treated badly) updated by
- My understanding is that this kind of model ultimately relies on the …
- 15:09 Ticket #2962 (*unknown* - Simulation creates diff file that shows no difference) created by
- Simulation of MSL32 model …
- 15:06 Ticket #2961 (Backend - Event handling problems) updated by
-
Status changed
I guess this is connected to the issue mentioned in #2946 (test3). - 14:41 Ticket #2961 (Backend - Event handling problems) created by
- Simulation of MSL32 model …
- 13:07 Ticket #2843 (Backend - wrong SimCode.SimVar generation) closed by
- fixed
- 11:53 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 11:51 Ticket #2960 (OMEdit - Extremely sluggish performance of OMEdit when browsing MSL and ...) created by
- I have tried the following experiment on my Dell E7440 laptop, …
- 11:14 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
- See also #2959
- 11:13 Ticket #2959 (Frontend - Use of partial, non-redeclared classes is not reported by the front-end) updated by
-
Summary changed
- 11:12 Ticket #2959 (Frontend - Use of partial, non-redeclared classes is not reported by the front-end) created by
- Consider the following model, obtained by dragging components from the …
- 10:28 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
- Work has started on this issue, stay tuned…
- 10:18 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
- +1 on this, I lost more time than I like to think about until I found …
- 10:15 Ticket #2958 (*unknown* - Pump delta_head_init always negative) created by
- Whenever I use a pump, I get such a warning: […] I also see this …
- 09:39 Ticket #2957 (MetaModelica - MetaModelica reflection API) created by
- It would be nice to introduce a reflection API for MetaModelica (get …
- 08:32 Ticket #2942 (*unknown* - Beta2 vs Beta4: worsening performance and not convergence of a simulation) updated by
- Yes, it works with r23143, thank you. It was not working with a …
- 07:44 Ticket #2942 (*unknown* - Beta2 vs Beta4: worsening performance and not convergence of a simulation) updated by
- I can report that using r23143, the WaterHammerValve simulation …
- 05:52 Ticket #1762 (OMEdit - Inconsistent interface for instantiation and checking in OMEdit) updated by
- You could change checkModel to not be totally annoying, and force …
- 03:31 Ticket #2872 (OMEdit - OMEdit - better omeditcommands.log) updated by
- Done in r23175.
- 03:11 Ticket #2592 (OMEdit - Unable to make connection in OMEdit) updated by
- I know you were not able to save the model but I need a model to test …
- 03:09 Ticket #1762 (OMEdit - Inconsistent interface for instantiation and checking in OMEdit) closed by
- fixed: Fixed in r23174. I can't show errors in messages list because …
- 01:29 Ticket #2611 (OMEdit - Zooming issue in OMEdit) closed by
- fixed: Fixed in r23172.
2014-11-03:
- 16:27 Ticket #2481 (OMEdit - Better control of integration algorithms and output features in OMEdit) updated by
-
In r23165 a support for
-noEquidistantTimeGridflag is done. I have … - 16:24 Ticket #2935 (Command Prompt Environment - Bootstrapped OMC needs to handle -flags) closed by
- fixed: Fixed in r23076.
- 16:12 Ticket #2956 (OMEdit - Moving a complete model disassembles everything) updated by
- Replying to Adam Dershowitz <dersh@…>: > How does one …
- 16:02 Ticket #2956 (OMEdit - Moving a complete model disassembles everything) updated by
- You can do as follows: - find Rectifier in the Modelica tree - switch …
- 15:39 Ticket #2956 (OMEdit - Moving a complete model disassembles everything) updated by
- How does one complete step 2) above? The more general question is how …
- 15:09 Ticket #2792 (OMEdit - Connection lines are floating in diagram view of OMEdit) updated by
- Replying to ceraolo: > Indeed this issue is not completely …
- 15:08 Ticket #2956 (OMEdit - Moving a complete model disassembles everything) updated by
-
Cc, Status changed
- 15:07 Ticket #2956 (OMEdit - Moving a complete model disassembles everything) created by
- Consider the following step-by-step procedure. 1) Open the component …
- 14:09 Ticket #2955 (Frontend - Add scope name to SourceInfo) created by
- We should add scope name to SourceInfo (so when you call sourceInfo(), …
- 14:02 Ticket #1932 (Backend - Redesign When Equation Implementation in Backend) updated by
-
Milestone changed
- 13:16 Ticket #2954 (Frontend - package.order encoded UTF-8 with Byte Order Mark (BOM) is not properly ...) updated by
-
Owner, Component changed
Yeah, it should be class loader, so FrontEnd I guess? - 12:58 Ticket #2954 (Frontend - package.order encoded UTF-8 with Byte Order Mark (BOM) is not properly ...) updated by
- What does this have to do with the parser? The parser never reads …
- 12:54 Ticket #2954 (Frontend - package.order encoded UTF-8 with Byte Order Mark (BOM) is not properly ...) updated by
-
Owner, Component, Description, Summary changed
- 12:13 Ticket #2882 (Interactive Environment - Query of parameters of fluid components from OMEdit is really slow) updated by
- Great, thank you very much!
- 12:10 Ticket #2954 (Frontend - package.order encoded UTF-8 with Byte Order Mark (BOM) is not properly ...) created by
- When we read package.order encoded in UTF-8 with BOM the first class …
- 12:07 Ticket #2951 (Backend - Failing MSL31 model with Cellier Tearing) updated by
-
Status changed
- 11:55 Ticket #2951 (Backend - Failing MSL31 model with Cellier Tearing) updated by
-
Status, Owner changed
- 11:50 Ticket #2953 (Backend - Error "The arguments x_min and x_max to OneNonLinearEquation.solve(..) ...) created by
- MSL32/hpcom model Modelica.Fluid.Examples.BranchingDynamicPipes.mo …
- 11:44 Ticket #2952 (Backend - Solving non-linear system fails for model but "Files equal!") created by
- Non-linear system solver fails for MSL32 model …
- 11:34 Ticket #2951 (Backend - Failing MSL31 model with Cellier Tearing) created by
- MSL31 model …
- 11:26 Ticket #2950 (Backend - Failing ThermoSysPro model with Cellier Tearing) created by
- Simulation of 3rd Party model …
- 10:07 WritingEfficientMetaModelica edited by
- (diff)
- 09:47 Ticket #2946 (Run-time - events are treated badly) updated by
- The fix also uncovers more issues, so that I cannot commit it as it is …
- 09:40 Ticket #2946 (Run-time - events are treated badly) updated by
- I did some changes to the evaluation of zero crossings, which fix all …
- 08:53 Ticket #2949 (Frontend - MultiBody.Examples.Elementary.UserDefinedGravityField doesn't work) updated by
- According to …
- 08:49 Ticket #2943 (Interactive Environment - r23100 OMEdit deletes components from model files!) updated by
- Thank you for the fix!
- 08:04 Ticket #2949 (Frontend - MultiBody.Examples.Elementary.UserDefinedGravityField doesn't work) created by
- I tried to validate the example from MSL, …
2014-11-02:
- 11:07 Ticket #2792 (OMEdit - Connection lines are floating in diagram view of OMEdit) updated by
- Indeed this issue is not completely fixed. Consider the following …
2014-11-01:
- 21:37 Ticket #2882 (Interactive Environment - Query of parameters of fluid components from OMEdit is really slow) closed by
- fixed: Fixed in r23131.
- 14:46 Ticket #2872 (OMEdit - OMEdit - better omeditcommands.log) updated by
- Actually when you're sending strings to OMC in the script you need to …
- 14:41 Ticket #2872 (OMEdit - OMEdit - better omeditcommands.log) updated by
- Just one minor issue, when you're creating a class you do: […] Note …
- 02:40 Ticket #2944 (OMEdit - OMEdit News: Error creating SSL context ()) closed by
- fixed: Added the required binaries in the installer r23126.
- 02:40 Ticket #2948 (Interactive Environment - OMC on Windows does not support non-ascii directories) updated by
- Sort of duplicate of #1883.
- 02:38 Ticket #1883 (OMEdit - OMEdit has issues when opening files with special chars in them ...) updated by
-
Status, Owner changed
This is ugly but we need to use the wide char API in Windows (which … - 02:05 Ticket #2943 (Interactive Environment - r23100 OMEdit deletes components from model files!) updated by
-
Milestone changed
- 02:04 Ticket #2943 (Interactive Environment - r23100 OMEdit deletes components from model files!) closed by
- fixed: Fixed in r23123.
- 01:24 Ticket #2948 (Interactive Environment - OMC on Windows does not support non-ascii directories) updated by
-
Cc, Description changed
- 01:21 Ticket #2948 (Interactive Environment - OMC on Windows does not support non-ascii directories) created by
- Just see the latest crash report: …
Note:
See TracTimeline
for information about the timeline view.
![15:10 transformer1.l2sigma.inductor[3].i_Rectifier12pulse_diff_file.PNG attached to Ticket #2962 by Patrick Täuber](/OpenModelica/attachment/ticket/2962/transformer1.l2sigma.inductor%5B3%5D.i_Rectifier12pulse_diff_file.PNG){kind=link}
![15:10 transformer1.l2sigma.inductor[3].i_Rectifier6pulse_diff_file.PNG attached to Ticket #2962 by Patrick Täuber](/OpenModelica/attachment/ticket/2962/transformer1.l2sigma.inductor%5B3%5D.i_Rectifier6pulse_diff_file.PNG){kind=link}
![15:09 transformer1.l2sigma.inductor[1].i_Rectifier6pulse_diff_file.PNG attached to Ticket #2962 by Patrick Täuber](/OpenModelica/attachment/ticket/2962/transformer1.l2sigma.inductor%5B1%5D.i_Rectifier6pulse_diff_file.PNG){kind=link}
