Timeline
2017-03-28:
- 16:43 Ticket #4373 (Backend - differentiation module cannot handle non-constant subscripts) updated by
-
Summary changed
- 16:42 Ticket #4373 (Backend - differentiation module cannot handle non-constant subscripts) updated by
- Replying to lochel: > I guess this isn't connected to the …
- 16:30 Ticket #4373 (Backend - differentiation module cannot handle non-constant subscripts) updated by
- I guess this isn't connected to the pre-operator but to …
- 12:29 Ticket #4374 (Backend - Wrong analysis of linearity due to missing jacobian) created by
- The Model …
- 10:17 Ticket #4345 (OMEdit - OMEdit: correct size for pages in options dialog) updated by
- Replying to janK: > Unfortunately, I do not have a 4K …
- 06:35 Ticket #4345 (OMEdit - OMEdit: correct size for pages in options dialog) updated by
- Unfortunately, I do not have a 4K display yet. Actually, I just wanted …
2017-03-27:
- 20:12 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
-
Cc changed
Seems like our new mailing list restrictions doesn't allow trac to … - 20:06 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
- @casella Francesco, can you also have a look?
- 19:59 Ticket #4345 (OMEdit - OMEdit: correct size for pages in options dialog) updated by
- >> I could reset the scroll bar to top position when page is changed. …
- 19:42 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
-
Cc changed
I am inviting more people to comment on this ticket. - 15:02 Ticket #4345 (OMEdit - OMEdit: correct size for pages in options dialog) updated by
- >I could reset the scroll bar to top position when page is changed. …
- 14:43 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
- > > Could you mention the rule number you are referring to? All the …
- 14:16 Ticket #4345 (OMEdit - OMEdit: correct size for pages in options dialog) closed by
- wontfix: The different pages have different heights so the best height for the …
- 13:57 Ticket #4369 (OMEdit - Improper use of square brackets) updated by
-
Status changed
> The CGPM indicates that the unit of measure of a number follows the … - 13:37 Ticket #4370 (Run-time - Modelica.Mechanics.Translational.Components.Fixed rises an error when ...) updated by
-
Status, Owner, Component changed
- 13:36 Ticket #4373 (Backend - differentiation module cannot handle non-constant subscripts) updated by
-
Status, Owner, Component changed
- 13:32 Ticket #4373 (Backend - differentiation module cannot handle non-constant subscripts) created by
- My name is Vadiraj Patil, I am a student from Chalmers University of …
- 12:57 Ticket #4357 (OMEdit - OMEdit allows class names with spaces) closed by
- fixed: Fixed in ebd8f5e/OMEdit.
- 11:39 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
Status, Owner changed
- 11:20 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
@adrpo: Yes, I meant exactly that case when
importis used to … - 11:16 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
- The problem is that we (wrongly) fully qualify the type of components …
- 11:13 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
Summary changed
- 11:12 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
-
Summary changed
- 11:08 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) updated by
- This is an interesting ticket. I think it is related to #4351.
- 11:01 Ticket #4372 (OMEdit - model replaceable path changes when the model icon is moved and the ...) created by
- Please consider the following models (also attached): […] The …
- 07:33 Ticket #4315 (Installation program - Request to add PhotoVoltaics library as systems library to OpenModelica) updated by
- Thanks a lot.
2017-03-26:
- 16:05 Ticket #4371 (OMPlot - Import unit information) created by
- It would be nice to have unit information available if a result file …
- 06:57 Ticket #4367 (Run-time - ModelicaStandardTables_CombiTable1D_minimumAbscissa undefined reference) updated by
- Attempt to fix this with PR: …
2017-03-25:
- 20:53 Ticket #4352 (Interactive Environment - Choosing record results in setComponentModifierValue error message) updated by
- In #4370 a similar error message (but still a different issue) is reported.
- 20:51 Ticket #4370 (Run-time - Modelica.Mechanics.Translational.Components.Fixed rises an error when ...) updated by
- I think this issue is related to the ticket #4352.
- 17:56 Ticket #4218 (OMEdit - Omedit changes modifiers in string when the parameters pop-up window ...) closed by
- fixed
- 17:54 Ticket #3468 (Installation program - Openmodelica debian nigthly repository seems not be longer updated) closed by
- fixed
- 17:48 Ticket #4370 (Run-time - Modelica.Mechanics.Translational.Components.Fixed rises an error when ...) created by
- Please consider the following model: […] Now open the parameter …
- 09:58 Ticket #4369 (OMEdit - Improper use of square brackets) created by
- The CGPM indicates that the unit of measure of a number follows the …
- 07:40 Ticket #4365 (Frontend - Count number of equations correctly when using inner/outer variables ...) updated by
- Actually, Dymola is complaining in the same manner, that there are too …
- 07:04 Ticket #4368 (Interactive Environment - Failed to merge Modelica text @ comment and newline before equation) created by
- Dear developers, I noticed, that from time to time OMEdit will shrink …
2017-03-24:
- 17:11 Ticket #4367 (Run-time - ModelicaStandardTables_CombiTable1D_minimumAbscissa undefined reference) updated by
-
Cc changed
I guess these happen because of some updates to MSL tables. Do we have … - 17:10 Ticket #4367 (Run-time - ModelicaStandardTables_CombiTable1D_minimumAbscissa undefined reference) created by
- Some of the MSL/ModelicaTest libraries took a dive because of missing …
- 15:29 Ticket #3295 (OMEdit - OMEdit: Option "close all" and "close other" is missing in tab view) closed by
- fixed: Fixed in a4c9d93/OMEdit.
- 14:01 Ticket #4346 (Run-time - OMEdit: inconsistant handling of protected objects) updated by
-
Cc, Status, Component, Owner changed
- 14:01 Ticket #4366 (Build Environment - Error from make in omlibrary-core) created by
- Hi, I am trying to build OpenModelica on RedHat 6. "make -j4 …
- 13:48 Ticket #4334 (OMEdit - OMEdit: "save experiment annotation inside model" file changed and undo) updated by
- Not really. See ticket:4344#comment:1
- 13:47 Ticket #4344 (OMEdit - OMEdit: keep UNDO stack after text view changes) updated by
-
Status, Summary changed
It is not possible to merge the two stacks since the one in … - 13:19 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) updated by
- Thanks a lot, that solved this problem!
- 12:54 Ticket #4334 (OMEdit - OMEdit: "save experiment annotation inside model" file changed and undo) updated by
- Great! So you have the pleasure to also close the ticket #4344 :D
- 11:54 Ticket #4334 (OMEdit - OMEdit: "save experiment annotation inside model" file changed and undo) closed by
- fixed: It is not possible to merge the two stacks since the one in …
- 11:08 Ticket #4365 (Frontend - Count number of equations correctly when using inner/outer variables ...) created by
- I recently became familiar with the inner/outer statement which is …
- 10:48 Ticket #4364 (Run-time - Very strange error messages when filename contains "InnerOuter") updated by
-
Description changed
- 10:48 Ticket #4364 (Run-time - Very strange error messages when filename contains "InnerOuter") updated by
-
Description changed
- 10:44 Ticket #4364 (Run-time - Very strange error messages when filename contains "InnerOuter") updated by
-
Description changed
- 10:43 Ticket #4364 (Run-time - Very strange error messages when filename contains "InnerOuter") updated by
-
Description changed
- 10:35 Ticket #4364 (Run-time - Very strange error messages when filename contains "InnerOuter") updated by
-
Description changed
- 10:33 Ticket #4364 (Run-time - Very strange error messages when filename contains "InnerOuter") created by
- Hi I just wanted to create a ticket regarding inner/outer problems and …
- 08:45 Ticket #4363 (Backend - Properly fix handling of Clocks the front-end, back-end and codegen) updated by
- After discussing it with Martin I created a Modelica ticket for …
- 07:10 Ticket #4351 (OMEdit - OMEdit: Keep abbreviated library paths from import when moving components) updated by
-
I have the feeling that the
importstatement is not evaluated in … - 06:15 Ticket #4363 (Backend - Properly fix handling of Clocks the front-end, back-end and codegen) updated by
- For interval: > This operator returns the interval between the …
2017-03-23:
- 19:35 Ticket #4363 (Backend - Properly fix handling of Clocks the front-end, back-end and codegen) updated by
- @sjoelund.se: are you sure we don't need vectorization of clock …
- 19:28 Ticket #4363 (Backend - Properly fix handling of Clocks the front-end, back-end and codegen) created by
- See PR: https://github.com/OpenModelica/OMCompiler/pull/1574 …
- 18:23 Ticket #4362 (Backend - Always check how new methods scale with the problem size) created by
- Dear developers, allow me this reflection triggered by the discussion …
- 17:33 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
- Replying to ptaeuber: > >Sounds good, except that I don't …
- 16:53 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
-
Status changed
- 16:53 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
- >Sounds good, except that I don't like "casual" very much. It conveys …
- 16:18 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
- Replying to ptaeuber: > Ok, I see your point. Since there …
- 15:49 Ticket #3812 (Backend - Functions that depend on parameters should only get evaluated once) reopened by
- 15:28 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
- Ok, I see your point. Since there is already a flag …
- 06:21 Ticket #4315 (Installation program - Request to add PhotoVoltaics library as systems library to OpenModelica) updated by
- Done
2017-03-22:
- 22:26 Ticket #4361 (OMEdit - Util/StringHandler.cpp:1125:40: error: ambiguous overload for ‘operator!=’) closed by
- fixed: Fixed in 742ae25/OMEdit.
- 22:13 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
- Replying to ptaeuber: > The tearing heuristic would never …
- 22:05 Ticket #4361 (OMEdit - Util/StringHandler.cpp:1125:40: error: ambiguous overload for ‘operator!=’) created by
- Hello I cannot compile openmodelica git version: […] platform is …
- 19:27 Ticket #4359 (Initialization - start-value are not initialized correctly) updated by
- This affects the large-scale power system models that we have been …
- 19:27 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) updated by
- The tearing heuristic would never choose the equation `6: …
- 19:04 Ticket #4360 (Backend - Is static tearing of parameter-dependent linear systems a good idea?) created by
- Maybe not. Consider this test case […] The back-end solves the …
- 17:03 Ticket #4359 (Initialization - start-value are not initialized correctly) updated by
-
Status changed
Which libraries are affected by this? - 16:10 Ticket #4336 (Code Generation - Problem with code generation involving arrays of components containing ...) updated by
- Replying to Antonio Froio <antonio.froio@…>: > If the …
- 16:06 Ticket #4336 (Code Generation - Problem with code generation involving arrays of components containing ...) updated by
- > The involved variable is an element of a Real array inside an array …
- 15:13 Ticket #4359 (Initialization - start-value are not initialized correctly) created by
- In following simple example: […] the start-values of the iteration …
- 14:37 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
- If you want visualization? Use a virtual machine to run Linux. Or …
- 14:24 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
- So what would be the solution you propose?
- 14:23 Ticket #4357 (OMEdit - OMEdit allows class names with spaces) updated by
-
Priority, Type changed
Sorry but this really is not a normal problem but a "high" problem … - 13:57 Ticket #4357 (OMEdit - OMEdit allows class names with spaces) updated by
-
Priority, Type changed
- 13:57 Ticket #4357 (OMEdit - OMEdit allows class names with spaces) updated by
- Very good idea! This happened to me not so long ago too…
- 13:46 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
- Probably not
- 12:58 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
- So are you saying installing the nightly would not help?
- 12:55 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
- It's missing in the binary builds because last time I checked OSG did …
- 12:49 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
-
Version changed
OK this was using the latest stable 1.11.0, I will tell the student to … - 12:35 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
- It works for me with 1.12.0~dev-539 on Mac OS 10.12.3 installed with …
- 12:22 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) updated by
-
Status, Owner, Component changed
- 12:21 Ticket #4358 (Installation program - MacOS build lacks support for 3d animation + visualisation) created by
- The new and nice feature is unfortunately missing in the MacOS build. …
- 12:11 Ticket #4357 (OMEdit - OMEdit allows class names with spaces) created by
- During a workshop beginners forgot the rule of "no spaces" allowed …
- 12:05 Ticket #4338 (OMEdit - new checkBox annotation causes display error in diagram) updated by
- Fix confirmed in today's nightly build.
- 10:21 Ticket #4336 (Code Generation - Problem with code generation involving arrays of components containing ...) updated by
- It seems related to initialization: the start values for all the …
- 09:45 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) updated by
- Regarding your last note, please see #4323.
- 09:29 Ticket #4336 (Code Generation - Problem with code generation involving arrays of components containing ...) updated by
-
Status, Owner changed
- 08:41 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) updated by
- I forgot: On windows, I tested gcc, msvc13 and msvc15.
- 08:40 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) created by
- More or less a copy of this issue: …
- 08:38 Ticket #4355 (*unknown* - Simultaneous inner/outer broken) updated by
-
Description changed
- 08:38 Ticket #4355 (*unknown* - Simultaneous inner/outer broken) created by
- The following model should work according to the specification. In …
- 08:36 Ticket #4354 (Backend - Missing inlining of initial equations causes inefficiencies with ...) created by
- Please consider the following test case (also attached) […] M2 is …
- 06:23 Ticket #4337 (OMEdit - OMEdit allows invalid connections) updated by
-
Priority changed
- 05:16 Ticket #4337 (OMEdit - OMEdit allows invalid connections) updated by
- Maybe is not that important for OMEdit to forbid connection of outputs …
2017-03-21:
- 17:01 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) updated by
- https://github.com/OpenModelica/OMCompiler/pull/1568
- 17:00 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) closed by
- fixed
- 16:50 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) updated by
- So it's an old autoconf that likes to emit bad code. Newer autoconf …
- 15:27 Ticket #3812 (Backend - Functions that depend on parameters should only get evaluated once) closed by
- fixed: With …
- 15:26 Ticket #4352 (Interactive Environment - Choosing record results in setComponentModifierValue error message) updated by
-
Summary changed
- 14:33 Ticket #4353 (OMEdit - OMEdit: Convenient selection of records for parameters) created by
- It seems to be good practice in Modelica to organize multiple …
- 14:20 Ticket #4352 (Interactive Environment - Choosing record results in setComponentModifierValue error message) created by
- Sorry, if this issue was already reported - I searched for it but I …
- 13:48 Ticket #4337 (OMEdit - OMEdit allows invalid connections) updated by
-
Cc changed
- 13:48 Ticket #4337 (OMEdit - OMEdit allows invalid connections) updated by
-
Status, Owner changed
We will do some basic checks in omc when using addConnection. - 13:37 Ticket #4337 (OMEdit - OMEdit allows invalid connections) reopened by
- 13:37 Ticket #4337 (OMEdit - OMEdit allows invalid connections) closed by
- fixed: In order to check the connectors compatibility I need to instantiate …
- 13:17 Ticket #4342 (OMEdit - OMEdit: bug: positions of elements in protected section are not saved ...) closed by
- fixed: Fixed in 2659444/OMCompiler.
- 12:44 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) updated by
- Right. Turns out that was why I did not understand the error myself. I …
- 10:52 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) updated by
- This is the configure file for OpenModelica, not OMCompiler.
- 09:55 Ticket #4342 (OMEdit - OMEdit: bug: positions of elements in protected section are not saved ...) updated by
-
Status, Owner changed
- 08:27 Ticket #4322 (OMEdit - OMEdit: Improve commenting of folded lines - but how?) updated by
- I've just checked the new behavior in the latest nightly build. In my …
- 06:26 Ticket #4326 (Build Environment - Syntax error from configure script when trying to compile OpenModelica) updated by
- Hi, if anyone could help, it would be much appreciated. Regards, Nils
Note:
See TracTimeline
for information about the timeline view.
