Timeline
2020-01-31:
- 23:12 Ticket #5818 (OMEdit - Suppress $cse variables in the OMEdit Variables Browser) created by
-
In case the backend generates
$csevariables, they are shown … - 22:45 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) created by
- Consider attached models InvSW and InvSWaron. They differ only for an …
- 17:50 Ticket #3921 (Backend - Introduce wrapFunctionCalls and CSE also for the initial equations) updated by
- Great! I saw some problem with the fmu checker in the pull request …
- 17:46 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- It worked! Thank you
- 16:55 Ticket #5815 (OMEdit - OMEdit not showing results) updated by
- So, maybe the json error is not related? No. I haven't made any …
- 16:38 Ticket #5815 (OMEdit - OMEdit not showing results) updated by
- The simulation executable, not OMEdit, is opening the .json file. …
- 15:09 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- […]
- 15:07 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
-
Try without the quotes
"for the paths for the set commands, … - 15:03 Ticket #5816 (OMEdit - Issues with icon extents in diagrams) created by
- Please check the attached test package, which reproduces issues I'm …
- 14:27 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- I used hint on comment2 to install a new version; I installed it and …
- 14:13 Ticket #5815 (OMEdit - OMEdit not showing results) created by
- After a recent upgrade (both 1.16.0~dev-146 and 1.16.0~dev-154) I …
- 13:35 Ticket #5814 (Code Generation - for loop in algorithm section gets wrong values) created by
- The following example is a simple demonstration of the bug. […] …
- 13:09 Ticket #3921 (Backend - Introduce wrapFunctionCalls and CSE also for the initial equations) updated by
-
I activated
wrapFunctionCallsfor the initialization in … - 12:31 Ticket #5754 (Backend - Bad error message in SimCodeFunctionUtil.lookForExtFunctionLibrary) closed by
- fixed: https://github.com/OpenModelica/OpenModelica/pull/708
- 12:31 Ticket #5754 (Backend - Bad error message in SimCodeFunctionUtil.lookForExtFunctionLibrary) updated by
-
Status changed
- 11:55 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
- Replying to adrpo: > However, I have no idea if this is …
- 11:27 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
- As far as I remember we do have the information on where a binding …
- 11:18 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
-
Priority, Milestone changed
- 11:16 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
-
Description changed
- 11:12 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
-
Description changed
- 10:41 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- Replying to adrpo: > All these tests are *working* in …
- 10:07 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- All these tests are *working* in Linux but they fail in some way on …
- 10:02 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- Problems include: * Expected results are the Linux results. Windows …
- 09:46 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- Replying to adrpo: > Current windows test failures: > …
- 08:27 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- When creating pull requests one needs to add "CI/Build MINGW" label to …
2020-01-30:
- 16:53 Ticket #5812 (Backend - Start values lost in big power plant initialization) updated by
- See #5813 for a discussion of the root cause of the issue
- 16:41 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) created by
- The selection of start attributes in alias variable sets is a crucial …
- 15:25 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
-
Description changed
- 14:45 Ticket #3921 (Backend - Introduce wrapFunctionCalls and CSE also for the initial equations) updated by
-
Status, Owner changed
- 14:32 Ticket #5810 (Build Environment - Mac OMEdit fails to build) closed by
- fixed
- 14:32 Ticket #5810 (Build Environment - Mac OMEdit fails to build) updated by
- That fixed it. Thank you!
- 13:53 Ticket #5802 (FMI - handling of causality="none" for FMI -2.0) closed by
- fixed
- 12:38 Ticket #5812 (Backend - Start values lost in big power plant initialization) created by
- When trying to simulate …
- 12:07 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- Unfortunately this doesn't work on the big test case. If I switch on …
- 12:06 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
-
One problem is the test scripts assume we build into the
build/… - 11:53 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- Replying to adrpo: > We don't install anything in Jenkins. …
- 11:14 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) updated by
- We don't install anything in Jenkins. We just use mos scripts to run …
- 10:50 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- See #5811 :)
- 10:50 Ticket #5811 (Testing Framework - Install OMC for Jenkins in the most problematic paths) created by
- OMC has always been plagued by issues in the installation and working …
- 09:09 Ticket #2131 (FMI - Multiple FMU's not supported) updated by
-
Milestone changed
- 07:35 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- We do have profiling stuff in the test suite, but no spaces in the …
2020-01-29:
- 19:32 Ticket #5810 (Build Environment - Mac OMEdit fails to build) updated by
- That is because of integration of OMSens into OpenModelica. I now …
- 19:28 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) closed by
- fixed: Of course, this will also work from command line. The call to gnuplot …
- 18:11 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- We ran a test on a larger model that showed over six million calls to …
- 18:04 Ticket #5476 (Backend - BE tries to generate non-existent boolean attributes when disabling tearing) updated by
-
Summary changed
- 18:03 Ticket #5810 (Build Environment - Mac OMEdit fails to build) updated by
- The linux build is also broken since 21 Jan, see …
- 18:02 Ticket #5800 (Backend - OMEdit fails to simulate example model from OpenHPL) updated by
-
Owner changed
Thanks @dietmarw for the analysis. @perost, would you mind having a look? - 18:00 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- Replying to adrpo: > I need to check but it might even …
- 17:57 Ticket #5797 (Backend - Disabling tearing breaks code generation in power system model when ...) updated by
- No problem, thanks for the notification.
- 17:56 Ticket #5803 (Interactive Environment - Library FCSys incompatible) closed by
- wontfix: Replying to anonymous: > Yes > > Replying to [comment:1 …
- 17:50 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- Thank you folks! BTW, it was not only an OMEdit issue, the thing was …
- 17:48 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- Local workaround: […]
- 17:31 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- Fixed via: https://github.com/OpenModelica/OpenModelica/pull/702 Also …
- 17:08 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- Tested the fix and is not working. Seems you need to also quote the …
- 17:07 Ticket #5476 (Backend - BE tries to generate non-existent boolean attributes when disabling tearing) closed by
- fixed
- 17:07 Ticket #5476 (Backend - BE tries to generate non-existent boolean attributes when disabling tearing) updated by
-
Yes, when using
--tearingMethod=minimalTearingthe model will … - 16:06 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- Seems adeas31 already has a fix for it: …
- 15:50 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
-
Status, Owner changed
The issues is here: … - 15:17 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- Sorry to push you, I badly need this stuff to prepare the keynote next …
- 15:09 Ticket #5810 (Build Environment - Mac OMEdit fails to build) created by
- I have 1.16.0~dev-78-g9317df6_0 installed (using Macports). I have …
- 15:00 Ticket #5800 (Backend - OMEdit fails to simulate example model from OpenHPL) updated by
- Switching to the old front-end and removing the Data component will …
- 14:59 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- I think we should look at the registry key and ask the user if he …
- 14:46 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- Replying to Karim.Abdelhak: > Start values for calculated …
- 14:31 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- > But how, then, to switch from an installation to another? If also …
- 13:48 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- Replying to adeas31: > No with the current installer it is …
- 13:44 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- Replying to lochel: > This might be synchronized with the …
- 13:43 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- I prepared a fix that is not the best solution but better than what we …
- 13:21 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- No with the current installer it is not possible to install multiple …
- 13:04 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) updated by
- As far as I know you can install different versions on the same PC in …
- 12:53 Ticket #5809 (Installation program - Allow multiple installations on the same Windows PC) created by
- I have a production model (a three-phase PWM inverter) that works …
- 11:54 Ticket #5803 (Interactive Environment - Library FCSys incompatible) updated by
- Yes Replying to casella: > We need to improve library …
- 10:37 Ticket #5797 (Backend - Disabling tearing breaks code generation in power system model when ...) updated by
- Sorry Francesco, but I won't be able to finish this ticket this week.
- 10:15 Ticket #5669 (NF API - OMEdit crashes expanding Modelica.Media.Air) updated by
- See #5803.
- 10:15 Ticket #5803 (Interactive Environment - Library FCSys incompatible) updated by
-
Status, Owner, Component, Milestone changed
This is the same issue as #5669. The compiler goes into infinte loop … - 09:58 Ticket #5750 (Frontend - buildModel fails when model is extended from) closed by
- worksforme: Please reopen this if you have additional input.
- 08:28 Ticket #5715 (Frontend - Bad simplification for n*n when n is Integer) updated by
-
Status, Owner changed
https://github.com/OpenModelica/OpenModelica/pull/693 - 08:26 Ticket #5802 (FMI - handling of causality="none" for FMI -2.0) updated by
-
Status, Owner changed
This is certainly a bug. The causality should belocalbut actually … - 08:09 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- Yes of course escaping the path using double quotes is the way to go
- 08:06 Ticket #5759 (Interactive Environment - Support Modelica.Utilities.Strings.* functions directly) updated by
- Two ways of resolving it: * Hard-coded version as we had in the past * …
- 07:57 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
-
Description changed
- 07:56 Ticket #5803 (Interactive Environment - Library FCSys incompatible) updated by
- It's not an error; it's a warning. If you want better compatibility, …
- 07:50 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) updated by
- @adeel: can Windows escape paths in the system call using double …
- 07:39 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- This might be synchronized with the OpenModelica FMI 2.0 export. There …
- 07:14 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
-
It seems like the compiler drops all
fixed=falsestart values. … - 02:16 Ticket #5808 (*unknown* - OMedit focus jumps from one block to another on a right click....) created by
- To reproduce I select a block by left clicking it in the diagram view. …
- 00:19 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- Update: I just found a workaround: if I add …
- 00:09 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) created by
- Consider the following model (also attached) […] The Newton solver …
2020-01-28:
- 22:19 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
-
Summary changed
- 22:19 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
-
Status, Owner, Component changed
I am working on Windows with OMEdit, as I guess most end-users would, … - 21:54 Ticket #5806 (Run-time - Initialization with homotopy and --daeMode does not generate ...) created by
- When the homotopy operator is used, a separate set of intial …
- 13:27 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
- I'm not sure what you are expecting to get, on my logs I get exactly …
- 12:21 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- The root cause of the issue is reported in #5805, please refer to …
- 12:19 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) created by
- @AnHeuermann, please check the attached package with test cases that …
2020-01-24:
- 17:52 Ticket #5804 (OMEdit - Profiling blocks+html is broken again in OMEdit) created by
- It seems that we really cannot keep profiling to work for more than …
- 15:17 Ticket #5803 (Interactive Environment - Library FCSys incompatible) updated by
- We need to improve library version management, see #5427. That's …
- 13:47 Ticket #5799 (*unknown* - Initialization solver hangs or fails at start of homotopy process ...) updated by
- Probably related to #5795, as it happens exactly in those cases having …
- 13:23 Ticket #5803 (Interactive Environment - Library FCSys incompatible) created by
- Hello, I am currently starting with OpenModelica and I need to work …
- 13:02 Ticket #5727 (Backend - More issues with dynamic state selection and Jacobians) updated by
- Replying to casella: > Update on the original test case. …
- 12:37 Ticket #5727 (Backend - More issues with dynamic state selection and Jacobians) updated by
-
Cc changed
- 11:46 Ticket #5797 (Backend - Disabling tearing breaks code generation in power system model when ...) updated by
- Thank you Mahder!
- 11:05 Ticket #5797 (Backend - Disabling tearing breaks code generation in power system model when ...) updated by
-
Status, Owner, Component changed
I think this is exactly the same issue as #5783. The error message … - 10:13 Ticket #5802 (FMI - handling of causality="none" for FMI -2.0) updated by
- See https://github.com/CATIA-Systems/FMPy/issues/107 for reference.
- 09:56 Ticket #5802 (FMI - handling of causality="none" for FMI -2.0) created by
- FMPy refuses to simulate a model if one of the variables has the …
- 09:46 Ticket #5766 (Run-time - Number of homotopy steps out of control) updated by
- @AnHeuermann, maybe @adrpo can help you with that
- 09:32 Ticket #5766 (Run-time - Number of homotopy steps out of control) updated by
- @AnHeuermann, there is another problem with the homotopy logging, …
- 09:16 Ticket #5727 (Backend - More issues with dynamic state selection and Jacobians) updated by
- Update on the original test case. Now that the static selection issue …
- 09:09 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- See also #5727 for the original, larger test case.
- 09:00 Ticket #5795 (*unknown* - The backend does not compute strong components of initial equations ...) updated by
-
Summary changed
- 08:59 Ticket #5795 (*unknown* - The backend does not compute strong components of initial equations ...) updated by
- Replying to Karim.Abdelhak: > > So I understand it wasn't …
Note:
See TracTimeline
for information about the timeline view.
