Timeline
2020-02-10:
- 22:17 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
-
Cc changed
- 22:10 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- Subscribing
- 21:40 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) updated by
- For the record, I was using OMEdit v1.16.0-dev-170-g3af6123f8, and …
- 21:34 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Replying to Karim.Abdelhak: > I re-ran some of the stuff …
- 21:30 Ticket #5806 (Run-time - Initialization with homotopy and --daeMode does not generate ...) updated by
- Thank you @Karim, I will test the nighly build tomorrow morning and report.
- 21:20 Ticket #5225 (Code Generation - Nested record assignments causes invalid code to be generated) closed by
- fixed: I guess we can close this ticket. Regarding the initialization …
- 21:20 Ticket #5225 (Code Generation - Nested record assignments causes invalid code to be generated) updated by
-
Status, Owner, Milestone changed
- 21:18 Ticket #5213 (Backend - Backend can't handle nested record assignment) closed by
- fixed
- 21:18 Ticket #5213 (Backend - Backend can't handle nested record assignment) updated by
-
Status, Owner, Milestone changed
I guess we can close this ticket. Regarding the initialization … - 21:17 Ticket #5699 (Backend - Support nonlinear equations with non-real unknowns) updated by
-
Milestone changed
- 21:17 Ticket #5171 (Backend - EvaluateFunctions.getStatementLHSScalar generates too large lists) closed by
- fixed: I guess we can close this ticket. Regarding the initialization …
- 21:15 Ticket #5699 (Backend - Support nonlinear equations with non-real unknowns) closed by
- fixed: Yes, I guess this ticket can now be closed. Regarding the …
- 20:09 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
-
I re-ran some of the stuff and it seems like
-d=newInstmakes a … - 18:14 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Since the results change when changing PC, it should be a matter of …
- 17:25 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) closed by
- fixed: Fixed in b6a7efde.
- 16:38 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) updated by
- Should be fixed in …
- 16:32 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) updated by
- Replying to perost: > Replying to [comment:2 …
- 16:20 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) updated by
- Replying to Karim.Abdelhak: > I cannot reproduce the …
- 16:12 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) updated by
-
I cannot reproduce the problem simulating attached
.mosscript. It … - 16:01 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Replying to Karim.Abdelhak: > Maybe i am missing …
- 15:44 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) updated by
-
Cc changed
- 15:43 Ticket #5835 (New Instantiation - Issue with NF and functions with arrays of records) created by
- Please consider the attached MWE. Try to simulate the model …
- 15:03 Ticket #5806 (Run-time - Initialization with homotopy and --daeMode does not generate ...) updated by
-
I added the
lambda0equation system in … - 13:06 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Maybe i am missing something but i built the last version …
- 12:02 Ticket #5834 (Frontend - Automatic sum using inner outer keywords behaves diferently in new frontend) updated by
- Ok, I totally see it now. Thank you very much for your great explanation.
- 10:13 Ticket #5814 (Code Generation - for loop in algorithm section gets wrong values) updated by
-
Status changed
- 09:03 Ticket #5806 (Run-time - Initialization with homotopy and --daeMode does not generate ...) updated by
- See the …
- 08:40 Ticket #5225 (Code Generation - Nested record assignments causes invalid code to be generated) updated by
- Since this commit …
- 08:39 Ticket #5213 (Backend - Backend can't handle nested record assignment) updated by
- Since this commit …
- 08:39 Ticket #5171 (Backend - EvaluateFunctions.getStatementLHSScalar generates too large lists) updated by
- Since this commit …
- 08:37 Ticket #5699 (Backend - Support nonlinear equations with non-real unknowns) updated by
- Since this commit …
2020-02-09:
- 23:04 Ticket #2127 (New Instantiation - Instantiation of arrays with multiple iterators) updated by
- Replying to perost: > I'm assuming this is for …
- 22:58 Ticket #5834 (Frontend - Automatic sum using inner outer keywords behaves diferently in new frontend) closed by
- invalid
- 22:58 Ticket #5834 (Frontend - Automatic sum using inner outer keywords behaves diferently in new frontend) updated by
-
Status, Owner changed
@LiborKudela, your models are not balanced, see Modelica Specification … - 21:35 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- See also #5452, we solved similar problems there. @Karim, it seems …
- 21:18 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
-
The attached
InvSWaron2model reproduces the issue with a … - 21:07 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
-
Priority, Status, Component, Owner changed
But now comes the important piece of information: if you compile the … - 20:53 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Replying to ceraolo: > However, I could try to do what you …
2020-02-08:
- 21:24 Ticket #2127 (New Instantiation - Instantiation of arrays with multiple iterators) updated by
- Replying to casella: > Still as in comment:6 as of …
- 21:19 Ticket #5834 (Frontend - Automatic sum using inner outer keywords behaves diferently in new frontend) created by
- I developed a method for summing(collecting) set of Real values from …[…]
- 20:12 Ticket #2367 (New Instantiation - Record with vectors, zeros(), size()) updated by
-
Still valid in
1.16.0-dev-170-g3af6123f8 - 20:07 Ticket #2127 (New Instantiation - Instantiation of arrays with multiple iterators) updated by
-
Still as in comment:6 as of
v1.16.0-dev-170-g3af6123f8 - 19:51 Ticket #5596 (New Instantiation - The NF does not report the flattening process to the debugger) closed by
- worksforme: The NF is now used by default by OMEdit, and all the debugging info is …
- 18:26 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- Replying to casella: > See comment:2 Sorry, I don't …
- 00:33 Ticket #2538 (New Instantiation - Support for partial derivatives of functions) updated by
-
Cc, Owner, Milestone changed
@perost, can you coordinate with @Karim and @AnHeuermann to get this … - 00:21 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) updated by
- All models in …
2020-02-07:
- 22:02 Ticket #5816 (OMEdit - Issues with icon extents in diagrams) updated by
-
Status changed
I started working on it this week. Already have a fix for it in my … - 21:23 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) closed by
- fixed: This issue is now resolved, the model is still broken but for other …
- 19:41 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) updated by
- The e-mail reporting is currently a bit broken (Adrian is trying to …
- 18:48 Ticket #5816 (OMEdit - Issues with icon extents in diagrams) updated by
-
Description changed
- 18:32 Ticket #5828 (Interactive Environment - [NFApi] The -d=nfAPI misses parameters in dialogs) updated by
-
Milestone changed
- 18:31 Ticket #5828 (Interactive Environment - [NFApi] The -d=nfAPI misses parameters in dialogs) updated by
- Sure. When I have a fix we will port it even to 1.14.2.
- 18:30 Ticket #5828 (Interactive Environment - [NFApi] The -d=nfAPI misses parameters in dialogs) updated by
- @adrpo, I guess this issue is also present in 1.14.1. Maybe we should …
- 18:01 Ticket #5817 (Backend - Usage of three-phase Aron sensor got problematic last December 2019) updated by
- See comment:2
- 18:01 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) updated by
- Replying to casella: > Very good! I'm looking forward to …
- 18:00 Ticket #5814 (Code Generation - for loop in algorithm section gets wrong values) updated by
-
Priority, Status, Component, Owner, Milestone changed
I had a quick look at this. We have these alias variables […] and … - 16:59 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
- @Karim, @AnHeuermann, it would be good if you could make a quick check …
- 16:48 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) updated by
- Very good! I'm looking forward to seeing the results of the Jenkins …
- 16:11 Ticket #5807 (Run-time - Start value for final parameters with fixed=false is ignored) updated by
- See …
- 16:02 Ticket #5797 (Backend - Disabling tearing breaks code generation in power system model when ...) updated by
-
Summary changed
- 16:01 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
- See also #5797
- 15:42 Ticket #5770 (Backend - The backend incorrectly generates a large set of nonlinear equations) updated by
- Replying to Karim.Abdelhak: > I was able to change the …
- 15:33 Ticket #5204 (New Instantiation - NFTyping.typeComponents can't evaluate structural parameter (hard)) updated by
- Fixed since c1c920a9.
- 15:33 Ticket #5243 (New Instantiation - The NF cannot evaluate a structural parameter in a record) closed by
- fixed: Fixed since c1c920a9.
- 15:05 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) closed by
- fixed: I re-checked the results of CSE both on the simple and full examples, …
- 14:20 Ticket #3921 (Backend - Introduce wrapFunctionCalls and CSE also for the initial equations) updated by
- See comments in [https://github.com/OpenModelica/OpenModelica/pull/710 …
- 14:19 Ticket #5727 (Backend - More issues with dynamic state selection and Jacobians) closed by
- fixed: Given the performance I obtained on this model and similar ones, I …
- 14:08 Ticket #5771 (Backend - Bogus CSE in power plant models using Modelica.Media) updated by
- See also #3921
- 11:23 Ticket #5831 (*unknown* - Asserts with "greater equal" conditions do not detect equals case) updated by
- Replying to Karim.Abdelhak: > Yep, there actually is no …
2020-02-06:
- 23:16 Ticket #5831 (*unknown* - Asserts with "greater equal" conditions do not detect equals case) updated by
- Replying to casella: > In general, relying on equality …
- 22:56 Ticket #5830 (Run-time - Implementation of CVODEs in OEM) updated by
-
Priority, Status, Component, Owner, Milestone changed
@lochel, this feature has strategic value for Berkeley Imperial. I … - 22:53 Ticket #5831 (*unknown* - Asserts with "greater equal" conditions do not detect equals case) closed by
- wontfix
- 22:52 Ticket #5831 (*unknown* - Asserts with "greater equal" conditions do not detect equals case) updated by
- In general, relying on equality conditions on Real numbers is a …
- 18:52 Ticket #5833 (OMJulia - No responds using Interact widget in IJulia with OMJulia) updated by
- As far as I see in the OMJulia.jl code it runs the executable with …
- 18:26 Ticket #5621 (FMI - Issue with FMI import) updated by
- I agree with @lochel that testing of an FMU is best done without a …
- 18:16 Ticket #5833 (OMJulia - No responds using Interact widget in IJulia with OMJulia) updated by
- The update rate is very slow though the model to simulate is very …
- 18:12 Ticket #5833 (OMJulia - No responds using Interact widget in IJulia with OMJulia) updated by
- Ah cool. This works!
- 16:53 Ticket #5833 (OMJulia - No responds using Interact widget in IJulia with OMJulia) updated by
-
This seems to be a known issue with
PyPlot.plotand … - 16:53 Ticket #4466 (FMI - Co-Sim FMIs "maxOutputDerivativeOrder" set to wrong value) closed by
-
fixed: I fixed the
maxOutputDerivativeOrderattribute a while back. It is … - 16:10 Ticket #5621 (FMI - Issue with FMI import) updated by
- I think it's rather the other way around. Wrapping an FMU with …
- 15:58 Ticket #5791 (FMI - Wrong valueReference in modelDescription.xml) closed by
- invalid: This ticket is indeed invalid. I tried to make a simple test case from …
- 15:50 Ticket #3721 (FMI 1.0 - Re: FMI 1.0 co-simulation API skeleton.) updated by
-
Milestone changed
- 15:50 Ticket #3721 (FMI 1.0 - Re: FMI 1.0 co-simulation API skeleton.) updated by
-
Component changed
- 15:47 Ticket #3494 (FMI 1.0 - Start values not taken from modelDescription.xml) updated by
-
Component changed
- 12:48 Ticket #5833 (OMJulia - No responds using Interact widget in IJulia with OMJulia) created by
- Using the following code in IJulia […] displays a slider widget …
- 09:25 Ticket #5726 (Third-Party Libraries - Categorize open-source libraries in OpenModelica for different uses) updated by
- There are two parts to this: * Further break up the reports into …
2020-02-05:
- 22:42 Ticket #5832 (*unknown* - Simulation log file shows euler as solver independend of chosen solver) closed by
- invalid: I don't know what your test model contains, but if there are only …
- 18:32 Ticket #5820 (OMJulia - OMJulia ModelicaSystem - BouncingBall.mo! NotFound) updated by
- Using "./MyModel.mo" for a model stored in the work directory finally …
- 17:56 Ticket #5825 (OMEdit - [OMEDIT] Export to specific location) updated by
- I would still be more happy to export a FMU to some directory without …
- 16:19 Ticket #5827 (Build Environment - Have a setting for dynamic/static link of the generated executable) updated by
- I'd say that as far as OMEdit is concerned, faster dynamic linking …
- 16:13 Ticket #5825 (OMEdit - [OMEDIT] Export to specific location) updated by
- Can we close this then?
- 14:36 Ticket #5791 (FMI - Wrong valueReference in modelDescription.xml) updated by
- I can't see why the generated value References are not correct. …
- 12:11 Ticket #5832 (*unknown* - Simulation log file shows euler as solver independend of chosen solver) created by
- Independendly from chosen solver the log file writes euler into the …
- 10:14 Ticket #5831 (*unknown* - Asserts with "greater equal" conditions do not detect equals case) created by
- A test model with an assert is implemented as follows: […] When …
2020-02-04:
- 19:02 Ticket #5830 (Run-time - Implementation of CVODEs in OEM) created by
- Please implement the CVODES solver in OEM editor simulation options.
- 13:23 fmi created by
- 12:19 Ticket #5801 (OMEdit - Diagram size in OMEdit) closed by
- fixed: Fixed in 05c2ae9/OpenModelica.
- 11:07 Ticket #5828 (Interactive Environment - [NFApi] The -d=nfAPI misses parameters in dialogs) updated by
-
Priority, Milestone changed
- 11:06 Ticket #5829 (OMEdit - [OMEdit] The plotting window is not activated after you simulated with ...) created by
- If you simulate with 3d and then make another model and simulate …
- 10:57 Ticket #5828 (Interactive Environment - [NFApi] The -d=nfAPI misses parameters in dialogs) created by
- Open Modelica.Fluid.Examples.PumpingSystem and double click on pipe to …
- 10:55 Ticket #5827 (Build Environment - Have a setting for dynamic/static link of the generated executable) updated by
- Then you need to deal with paths to dlls on Windows though. OMPython …
- 10:44 Ticket #5827 (Build Environment - Have a setting for dynamic/static link of the generated executable) created by
- Currently it takes a lot of time to compile an executable (at least on …
- 10:00 Ticket #5825 (OMEdit - [OMEDIT] Export to specific location) updated by
-
Is already possible through
Tools->Options->FMIsettings. You can … - 09:30 Ticket #5825 (OMEdit - [OMEDIT] Export to specific location) updated by
-
Priority, Keywords changed
- 09:30 Ticket #5826 (OMEdit - [OMEdit] Automatically expand the filtered library tree) created by
- Currently when we filter the library tree you need to manually expand …
- 09:25 Ticket #5825 (OMEdit - [OMEDIT] Export to specific location) updated by
-
Owner, Component, Summary changed
- 08:40 Ticket #5825 (OMEdit - [OMEDIT] Export to specific location) created by
- Just a quality of life improvement. I would suggest to add an …
2020-02-03:
- 17:18 Ticket #5824 (Run-time - Import start values from existing simulations run with other tools) created by
- When migrating models from other Modelica tools to OMC, issues can …
- 14:44 Ticket #5823 (FMI - Verification of FMI models has interpolation issues) updated by
-
Summary changed
- 14:44 Ticket #5823 (FMI - Verification of FMI models has interpolation issues) created by
- As Lennart pointed out in the Annual Workshop, the reported …
- 14:11 Ticket #5753 (New Instantiation - Checking a model in Chemical results in internal error of the NF) closed by
- fixed: Fixed in e8df198.
- 13:12 Ticket #5822 (Backend - PowerSystems sensor model segfaults during matching) updated by
- Most probably the size of the variable array or equation array is not …
- 12:11 Ticket #5721 (New Instantiation - Redeclare extends on functions not picking up the correct redeclared ...) closed by
- fixed: Fixed since 6a5601bf.
- 12:05 Ticket #5822 (Backend - PowerSystems sensor model segfaults during matching) created by
-
The
PowerSystems.Examples.AC1ph_DC.Elementary.Sensormodel segfaults … - 10:28 Ticket #5821 (New Instantiation - New frontend fails with StateGraph2.Transition) updated by
- @ahaumer, this is …
Note:
See TracTimeline
for information about the timeline view.
