Timeline
2020-05-18:
- 23:23 Ticket #5964 (Documentation - Link relevant OpenModelica workshop presentations and project ...) created by
- Lots of developments of OpenModelica are described in technical …
- 23:08 Ticket #5963 (Cpp Run-time - Put the old C++ runtime back into OMC 1.16.0) created by
- PR 690 …
- 19:19 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- Previous cmake gives this: […] So I guess we could manage to fix …
- 19:00 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- This will search for each of the boost libraries for the location: …
- 18:30 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
-
CMake has changed the way
find_package(Boost)works: […] … - 17:55 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- See https://github.com/OpenModelica/OpenModelica/pull/881 for an ugly …
- 17:46 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- I could also reproduce it with a built from scratch omc.
- 16:08 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- I blame CMake for this: CMake version on 18.04 TLS: `cmake version …
- 14:59 Ticket #5962 (*unknown* - We should check that major Linux distros work in the testsuite) updated by
-
Cc changed
- 14:58 Ticket #5962 (*unknown* - We should check that major Linux distros work in the testsuite) updated by
- Basically we need to do a minimal test of each built distribution. At …
- 14:25 Ticket #5962 (*unknown* - We should check that major Linux distros work in the testsuite) created by
- @rfranke reports issues with the C++ runtime if using Ubuntu 20.04 …
- 13:57 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- I tried WSL with Ubuntu 20.04 TLS (I went along …
- 13:20 Ticket #5944 (MetaModelica - Uniontype support for constants) closed by
- fixed
- 13:10 Ticket #5944 (MetaModelica - Uniontype support for constants) updated by
- Fixed in …
- 10:43 Ticket #5959 (OMEdit - Allow selecting component name while dragging) updated by
- thanks
- 09:55 Ticket #5958 (OMEdit - Filter and export partial result files from OMEdit) updated by
-
Status, Milestone changed
- 09:54 Ticket #5961 (OMEdit - OMEdit Recent files list) updated by
-
Status changed
- 09:54 Ticket #5959 (OMEdit - Allow selecting component name while dragging) closed by
-
invalid:
Tools->Options->Notificationscheck `Always ask for the dragged …
2020-05-17:
- 21:09 Ticket #5961 (OMEdit - OMEdit Recent files list) updated by
- I wanted to open this ticket since a long time, thanks @ceraolo for …
- 21:05 Ticket #5960 (Initialization - Large scale electrical models) updated by
- We really need some concrete examples that demonstrate the problems …
- 21:03 Ticket #5547 (FMI - Including c-files from external_solvers for nonlinearSolverHomotopy) updated by
- @Arinomo, could you provide a minimal working example to reproduce the …
2020-05-16:
- 17:08 Ticket #5961 (OMEdit - OMEdit Recent files list) updated by
-
Description changed
- 16:42 Ticket #5961 (OMEdit - OMEdit Recent files list) created by
- The OMEdit Recent files list contains at most 8 items. I think that …
- 07:12 Ticket #5960 (Initialization - Large scale electrical models) created by
- Dear staff member, I am working on large scale electrical models and …
2020-05-15:
- 16:15 Ticket #5959 (OMEdit - Allow selecting component name while dragging) created by
- Whenever you drag a new model on a diagram, by default OMEdit allows …
- 11:46 Ticket #5547 (FMI - Including c-files from external_solvers for nonlinearSolverHomotopy) updated by
- I think I would need an example model triggering this. I suspect it's …
- 11:05 Ticket #5594 (FMI - Some Model C-files are not included in modelDescription.xml) updated by
- Can we get this in time for 1.16.0?
- 10:11 Ticket #5845 (FMI - FMU export not creating UnitDefinitions section in ModelDescription.xml) updated by
-
Status changed
See also #5920 - 10:10 Ticket #5920 (FMI - UnitDefinitions are missing in modelDescription.xml) updated by
-
Status changed
See also #5845 - 10:05 Ticket #5594 (FMI - Some Model C-files are not included in modelDescription.xml) updated by
-
Status, Owner changed
- 10:03 Ticket #5547 (FMI - Including c-files from external_solvers for nonlinearSolverHomotopy) updated by
-
Cc changed
Martin, any comment on this? As far as I understood, you require … - 09:25 Ticket #5958 (OMEdit - Filter and export partial result files from OMEdit) created by
- It would be handy to make …
- 08:55 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to sjoelund.se: > Replying to [comment:11 …
- 08:08 Ticket #5956 (OMPython - omc.sendExpression("buildModel(%s)"%modelName) fails to build a model ...) updated by
- Thank you Adrian, that solved the problem with the script. I will try …
- 06:29 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Comparing that SteamPipe 640 total allocations needed throughout the …
- 06:16 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to Karim.Abdelhak: > If there is no reduction in …
- 06:12 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to casella: > Also, I'm not sure what "memory …
- 06:10 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to casella: > BTW I checked the .ods file, but I …
2020-05-14:
- 21:29 Ticket #5943 (Interactive Environment - Get rid of OPENMODELICAHOME (and OPENMODELICALIBRARY)) updated by
- OMShell and OMNotebook no longer use environment variables. See …
- 21:12 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to casella: > BTW I checked the .ods file, but I …
- 20:01 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- BTW I checked the .ods file, but I only saw memory allocation, not …
- 16:46 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- CMake intentionally uses double colons "to namespace IMPORTED targets …
- 16:24 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
-
Cc changed
- 16:24 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- @sjoelund.se: "That's generated on my system." What kind of system do …
- 15:06 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Thank @sjoelund.se for the analysis, thanks @Karim for looking at it. …
- 12:21 Ticket #5956 (OMPython - omc.sendExpression("buildModel(%s)"%modelName) fails to build a model ...) updated by
- OMEdit has the new front-end on by default, I guess that's why it …
- 12:11 Ticket #5956 (OMPython - omc.sendExpression("buildModel(%s)"%modelName) fails to build a model ...) updated by
- Hallo, I am trying today with other models and setup. I wrote a.mos …
- 12:01 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to sjoelund.se: > I created a script to look …
- 11:59 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- There are almost no models using less memory allocations than in …
- 11:56 Ticket #5957 (Initialization - Failed to sole linear system of equations at time 0, system is singular) updated by
-
Status, Owner changed
- 11:55 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- I created a script to look through the data of all sorting+matching, …
- 11:29 Ticket #5957 (Initialization - Failed to sole linear system of equations at time 0, system is singular) updated by
- Could you provide a minimal working example to reproduce this?
- 11:07 Ticket #5957 (Initialization - Failed to sole linear system of equations at time 0, system is singular) created by
- I am working on modelling photovoltaic power plants electrical grids. …
- 09:09 Ticket #5956 (OMPython - omc.sendExpression("buildModel(%s)"%modelName) fails to build a model ...) updated by
- Thank you arun3688 for the fast reply. I prepared the script in …
- 08:56 Ticket #4020 (FMI - "JSON object expected ',' or '}'" error on FMU load) updated by
- https://github.com/OpenModelica/OpenModelica/pull/871 should resolve …
2020-05-13:
- 16:14 Ticket #5956 (OMPython - omc.sendExpression("buildModel(%s)"%modelName) fails to build a model ...) updated by
- Can you post the list of OMPython commands used, before building the …
- 15:39 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
-
Clang avoids the crash of omc during bootstrapping. Btw.
flex… - 14:07 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
-
Cc, Status, Owner, Milestone changed
- 14:02 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- The results of the newInst test are …
- 13:59 Ticket #3781 (Backend - Fix scaling of detectJacobianSparsePattern) updated by
-
The module is now called
symbolicJacobian, but the problem is … - 13:04 Ticket #5956 (OMPython - omc.sendExpression("buildModel(%s)"%modelName) fails to build a model ...) created by
- Dear all, it seems that building a model via OMPython (using the …
- 11:54 Ticket #5955 (OMSens - OMSens does not stop running when failing) created by
- Currently, OMSens does not prompt the user if it fails to execute. …
- 11:48 Ticket #4035 (Code Generation - Inefficient Code for 'or') closed by
- worksforme
- 11:46 Ticket #5581 (FMI - FMU - ME accuracy) updated by
- The importFMU stuff indeed does not work nearly as well as OMSimulator
- 11:46 Ticket #5914 (OMSens - OMSens dependencies as a part of OMEdit installation) updated by
-
Owner, Component changed
- 11:30 Ticket #4953 (MetaModelica - Generator vs. List) closed by
- worksforme: This already exists: […]
- 10:58 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
- We need to change the way we are working with OMCompiler-3rdParty. I …
- 10:56 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
- It is because OMCompiler/3rdParty is on master instead of …
- 10:32 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
- gcc -v gives: gcc version 8.3.0 (Debian 8.3.0-6) clang -v gives: clang …
- 10:11 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- On Linux, the other tools first look for env.var OPENMODELICAHOME and …
- 10:02 Ticket #5700 (Build Environment - Failed to compile all functions in package SimCodeUtil. Error: Type ...) closed by
-
worksforme: You probably need to
./configure --without-omcif you had a … - 10:00 Ticket #5615 (Third-Party Libraries - unmet dependencies error blocks installation of third part libraries ...) closed by
- fixed: The instructions are updated and for the next release, the libraries …
- 10:00 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- or there is an error message if the OPENMODELICAHOME variable is not set
- 09:57 Ticket #5618 (OMEdit - Erroneous unit of sine phase angle) closed by
- fixed
- 09:54 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- The only issue that remains is how to find the OpenModelica …
- 09:53 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- ok, I think your proposal is fine for us. I can test it work after you …
- 09:50 Ticket #5692 (Run-time - segfault after "Invalid root".) closed by
- invalid: Closing this until there's enough to reproduce or figure out what goes …
- 09:48 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- Yes, if you can unload the libOpenModelicaCompiler.dll and then load …
- 09:38 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- @adrpo Does your proposal mean you can switch the omc version via the …
- 09:31 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
- I am using different OpenModelica versions on Linux and Windows. At …
- 09:31 Ticket #5656 (Interactive Environment - Allow step-by-step translation and simulation with scripting API) closed by
-
worksforme: You can also do
translateModel, which will not compile the code. Or … - 09:22 Ticket #5640 (OMEdit - Chineses language no longer available in OMEdit) closed by
- fixed: https://github.com/OpenModelica/OpenModelica/pull/851
- 09:21 Ticket #5640 (OMEdit - Chineses language no longer available in OMEdit) updated by
-
Status, Owner changed
- 09:21 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
-
Just
configure --with-cppruntimeas stated in the opener of this ticket. - 09:20 Ticket #5644 (Parser - OMEdit (nearly) deletes comments) updated by
- That's because comments are put where elements can be put. No element …
- 09:19 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- Indeed. Cmake configures wrong boost libs in my …
- 09:18 Ticket #5715 (Frontend - Bad simplification for n*n when n is Integer) closed by
- fixed
- 09:17 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
-
Niklas, I know you're using setting of
OPENMODELICAHOMEand … - 09:04 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
-
Cc changed
- 09:04 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) updated by
-
Status, Owner changed
- 09:01 Ticket #5954 (Interactive Environment - More homogeneous handling of Settings) created by
- Currently we have different handling of settings in Linux and Windows: …
- 08:54 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- […] That's generated on my system. I guess this is a cmake issue …
- 08:17 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Indeed. I restarted the newInst job (which is my reference), since …
- 08:02 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- The first reports from daeMode look very good! - …
- 07:09 Ticket #5949 (Parser - SimpleModelicaParser does stack overflow on huge arrays) closed by
- fixed: https://github.com/OpenModelica/OpenModelica/pull/867
- 04:15 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
- Ouch. How did you configure? Did you use gcc/g++ or clang/clang++?
2020-05-12:
- 22:51 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Makes perfect sense. The situation is very similar to what happens …
- 22:44 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- It is pushed!
- 20:29 Ticket #5953 (Code Generation - Broken visualization code generation for models with components having ...) created by
- Model VisualizationBug has two shapes with the same name …
- 19:27 Ticket #5951 (Build Environment - OMC build time has increased) updated by
- […]
- 19:26 Ticket #5951 (Build Environment - OMC build time has increased) updated by
- This seems to have been fixed: […]
- 17:57 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Part of the issue seems to be due to the ASSC algorithm. I guess i …
- 15:51 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) created by
- The scalability of the backend was greatly improved starting from …
- 15:50 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- I'm sorry to keep disturbing you, but I think that the solution works …
- 13:37 Ticket #5918 (Cpp Run-time - Size of Cpp FMU increased by more than 300% with OMSI) updated by
- > Is there a problem with the importFMU function? #5621
- 13:28 Ticket #5918 (Cpp Run-time - Size of Cpp FMU increased by more than 300% with OMSI) updated by
- I used this commands to reproduce Error: […] But I git the error …
- 11:10 Ticket #5951 (Build Environment - OMC build time has increased) updated by
- I think I found the problem of the always rebuild. In the CMakefile …
- 10:25 Ticket #5918 (Cpp Run-time - Size of Cpp FMU increased by more than 300% with OMSI) updated by
- ... but attempting to simulate a model with the Cpp runtime from …
- 10:02 Ticket #5918 (Cpp Run-time - Size of Cpp FMU increased by more than 300% with OMSI) updated by
- With today's nightly build I can confirm that the size of the …
- 09:39 Ticket #5930 (OMSens - OMSens missing fortran dependency) closed by
- fixed: Since it is mainly a configuration issue I will put it as resolved. …
- 09:28 Ticket #5711 (New Instantiation - Symbolic error) updated by
- Replying to casella: > Nice! I hope there are many other …
- 09:19 Ticket #5711 (New Instantiation - Symbolic error) updated by
- Nice! I hope there are many other models in the testsuite that benefit …
- 09:14 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- Thank you! Is this issue resolved or still pending?
- 08:34 Ticket #5711 (New Instantiation - Symbolic error) closed by
- fixed: The remaining compilation issue was fixed in …
- 08:33 Ticket #5946 (New Instantiation - [NF] Cross product inside array models is broken in the Frontend) closed by
- fixed: Fixed in 57ea0be6.
- 01:46 Ticket #5951 (Build Environment - OMC build time has increased) updated by
-
Output for
make -f Makefile.omdev.mingw runtimeCPPinstall -j3… - 01:09 Ticket #5951 (Build Environment - OMC build time has increased) updated by
- Started looking into this via: …
2020-05-11:
- 22:32 Ticket #5949 (Parser - SimpleModelicaParser does stack overflow on huge arrays) updated by
- The problem is that function_arguments is self recursive: …
- 22:13 Ticket #5949 (Parser - SimpleModelicaParser does stack overflow on huge arrays) updated by
-
Description changed
- 18:46 Ticket #5951 (Build Environment - OMC build time has increased) updated by
- The same output for the maintenance/v1.14 branch, i.e. rebuild without …
- 18:34 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- I have already added then:)! See OMSens repo Cheers, John
- 17:59 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- I'm sure that in the linux version […] there is not this part. I …
- 17:26 Ticket #5951 (Build Environment - OMC build time has increased) updated by
-
Cc changed
- 16:58 Ticket #5951 (Build Environment - OMC build time has increased) updated by
-
Here is the output of
make | grep 100%from a rebuild of the … - 16:42 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- Replying to casella: > Could we put these instructions (at …
- 16:18 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- Could we put these instructions (at least provisionally) in the tool …
- 16:16 Ticket #5947 (Backend - Backend cannot solve for variable indexed array elements) updated by
- After the discussion, we also noticed that in many cases it could be …
- 16:13 Ticket #5951 (Build Environment - OMC build time has increased) created by
- The omc build time has increased compared to the OpenModelica version …
- 16:03 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) created by
- Compiled OpenModelica according to docu: […] Compilation crashes …
- 15:53 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
-
No. It somehow installed
libboost-all-dev - 15:39 Ticket #5949 (Parser - SimpleModelicaParser does stack overflow on huge arrays) updated by
- Reported by AKIO NATORI via OpenModelica list.
- 15:34 Ticket #5949 (Parser - SimpleModelicaParser does stack overflow on huge arrays) created by
-
Basically it does
diffModelicaFileListingson a file with a … - 14:42 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) updated by
- Might be because you don't have boost installed? As far as I know: …
- 14:36 Ticket #5948 (Build Environment - Cpp runtime fails to link a model under Ubuntu 20.04 LTS (Focal Fossa)) created by
- Compiled OpenModelica according to docu: […] Afterwards attempted …
- 12:38 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
-
Cc changed
- 12:38 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- @The_Maxtro@… Hi! I followed the following instructions. Credit to …
- 10:34 Ticket #5946 (New Instantiation - [NF] Cross product inside array models is broken in the Frontend) updated by
-
Status, Owner changed
I think I've fixed this locally, I just need to do a bit of testing. - 09:16 Ticket #5947 (Backend - Backend cannot solve for variable indexed array elements) updated by
- Replying to casella: > A related issue is how do we handle …
- 08:53 Ticket #5947 (Backend - Backend cannot solve for variable indexed array elements) updated by
-
Cc changed
A1: I'd say it is probably not too relevant for today's models (-> we … - 08:35 Ticket #4120 (New Instantiation - Out-of-bounds array elements undetected by front-end) updated by
- Just a general comment from my side. Despite the original title of …
- 06:16 Ticket #5930 (OMSens - OMSens missing fortran dependency) updated by
- So, from a quick look at the OMSens repo …
- 00:04 Ticket #5946 (New Instantiation - [NF] Cross product inside array models is broken in the Frontend) updated by
- Replying to phannebohm: > I just tested it with …
Note:
See TracTimeline
for information about the timeline view.
