Timeline
2019-07-02:
- 22:52 Ticket #5560 (Backend - Make it clearer who are the candidate states in dynamic state ...) created by
- Please run the following test case […] If you turn on …
- 22:30 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- Replying to Karim.Abdelhak: > Sadly i did not fix the …
- 20:25 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- Well these are the expected messages from OMSimulator since it doesn't …
- 19:22 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- OpenModelica v1.14.0-dev-26573-g37e230930d (64-bit)
- 19:21 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- Yes, it runs (OMEdit). But there are some errors and ureadable …
- 18:10 Ticket #5559 (Backend - Issues with large parameter arrays) updated by
- @casella: not sure if is the same as #1451, but it does seem so. …
- 14:53 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- Personally, I'm trying to have the OSMC servers do it for me :) If …
- 14:48 Ticket #5559 (Backend - Issues with large parameter arrays) updated by
- I'm not 100% sure, but isn't this the same as #1451, or at least related?
- 14:42 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
-
Please check the attached
TestStateSelectpackage. The test … - 14:13 Ticket #3535 (Interactive Environment - duplicate function names are not detected) updated by
-
Owner, Component changed
I think its more of an API issue then OMEdit. - 13:26 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- @igor, can you test with the latest nightly build? We think all issue …
- 13:23 Ticket #5528 (NF API - NF API cannot instantiate a simple model with Medium package) closed by
- fixed: This issue was solved with one of the later nfAPI commits by @adrpo. …
- 12:58 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
-
I solved the problem presented in
TestIndexReduction5.mo, the … - 11:24 Ticket #4629 (New Instantiation - Perform unit checking by default only when doing checkModel) closed by
- fixed: I now get the expected result […]
- 11:21 Ticket #4608 (Interactive Environment - Unit string lost in Modelica.Media inheritance chain) updated by
-
Status, Owner, Component changed
I did some more analysis onomcommunication.log, using … - 11:02 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- Andrea has a nice test case in which the state selection algorithm is …
- 10:51 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- oh my. thanks! that would be awesome, I miss the power+simplicity of …
- 10:42 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- @Christoph: it is possible, but currently, only if you have Linux. The …
- 10:32 Ticket #5559 (Backend - Issues with large parameter arrays) updated by
- For example with Nmax=3000 it takes 74 seconds and 5GB with the master …
- 10:31 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- I have been wanting to ask this for a long time, casella: Is there a …
- 10:27 Ticket #5559 (Backend - Issues with large parameter arrays) created by
- See forum post: …
- 10:02 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
-
Cc changed
- 09:40 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- I ran the test case in comment:2 with the latest nightly build of …
- 09:19 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- I tried this model with the Modelica.Media R134a model: […] I had …
- 08:37 Ticket #3535 (Interactive Environment - duplicate function names are not detected) updated by
- OK, thanks!
- 05:27 Ticket #4449 (OMEdit - Plot Parametric issues) updated by
- Update. I don't get crashes with parametric plots anymore. In general, …
2019-07-01:
- 17:43 Ticket #5558 (OMEdit - Specific Heat Issue) updated by
- Thanks for the reply! I just used the setDewState function, but I …
- 17:34 Ticket #3535 (Interactive Environment - duplicate function names are not detected) updated by
-
Status, Owner, Component changed
Replying to casella: > @perost what is the status with … - 17:23 Ticket #3535 (Interactive Environment - duplicate function names are not detected) updated by
- @perost what is the status with this issue?
- 17:21 Ticket #4504 (Installation program - Respect the standards of Windows application installation) closed by
- fixed: Replying to adeas31: > c2275ed/OpenModelica …
- 15:39 Ticket #5558 (OMEdit - Specific Heat Issue) closed by
- invalid: @anonymous, I understand you always want to compute the cp of …
- 15:33 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) updated by
-
Summary changed
- 15:32 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- I think I finally understood what the problem is. I picked the …
- 15:01 Ticket #5558 (OMEdit - Specific Heat Issue) created by
- Hello, everyone! I need to calculate the specific heat capacity of …
- 11:24 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) updated by
- Thank you for your reply, > could you provide a minimal example with …
- 10:45 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- Replying to Karim.Abdelhak: > Replying to [comment:7 …
- 09:49 Ticket #2773 (Backend - Linear tearing slower than not using it) closed by
- fixed
- 09:49 Ticket #2773 (Backend - Linear tearing slower than not using it) updated by
- Added Commit …
- 09:27 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) updated by
- >At the begining of omc_error.c there is a setjmp.h that being …
- 09:25 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
-
Replying to casella:
> Karim, I added
-d=bltdump… - 07:59 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) updated by
-
Cc, Milestone changed
- 07:02 Ticket #5557 (FMI - RT-Simulation failed due to getBestJumpBuffer() function) created by
- Tried to simulate a FMU that included a lookup table with external …
2019-06-29:
- 14:27 Ticket #5556 (Susan (Templates) - Undefined behavior in OpenModelicaScriptingAPIQt.cpp) created by
- According to …
- 10:02 Ticket #5549 (FMI - Cross compilation of FMUs for Win64 on Ubuntu is broken for some ...) updated by
- A bit of analysis, just to save time a little: that function is from …
2019-06-28:
- 18:29 Ticket #5555 (FMI - FMI export broken if OpenModelica is installed in the Program Files ...) updated by
-
Version changed
- 18:27 Ticket #5555 (FMI - FMI export broken if OpenModelica is installed in the Program Files ...) created by
- One of our PhDs reports that he installed the latest nightly build in …
- 17:31 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- Replying to perost: > Replying to casella: > …
- 16:36 Ticket #5554 (OMEdit - Icons in Libraries browser should keep their aspect ratio) created by
- Icons with a non-square extent of their coordinate system are …
- 12:56 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- Replying to casella: > Are we going to get something to …
- 12:48 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- Are we going to get something to work with parameter arrays and arrays …
- 12:34 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- Replying to casella: > BTW, should we perhaps go for a …
- 12:31 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- Thank you @perost, I would have had a hard time finding such a small …
- 12:25 Ticket #5552 (FMI - OpenModelica FMUs seem to not report exact continuous states) updated by
-
Milestone changed
- 10:17 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- Replying to adeas31: > @casella can you provide a simple …
- 09:30 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- See also #5553.
- 09:29 Ticket #5553 (MetaModelica - [MetaModelica] Warn if a function gets to big and has too many cases) created by
- I think we should have a warning if a function gets too big (like the …
- 08:45 Ticket #5490 (OMEdit - Make the NF the default choice for code generation with automatic ...) updated by
- @casella can you provide a simple model that fails with the NF and …
- 08:27 Ticket #5552 (FMI - OpenModelica FMUs seem to not report exact continuous states) created by
- When compiling a simple model to a CoSimulation (cs) FMU using …
- 06:08 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) closed by
- fixed: The new Nightly build works fine on my Ububtu 16.04 :) Thanks to all …
2019-06-27:
- 23:30 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
-
HeatingSystem2.mois even smaller. Dymola selects: […] while … - 23:06 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
-
I attach a simplified version of
HeatingSystemthat only has … - 22:40 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- I mean, a compiler which fails to compile is ok, but a compiler that …
- 19:25 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- Not really, we had similar things before when one of the functions …
- 17:43 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- This is all quite creepy :)
- 17:28 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- The PR is now merged, we will see tomorrow how the nightly works.
- 14:20 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- I think CevalScriptBackend.cevalInteractiveFunctions3 became to big …
- 13:51 Ticket #5485 (Run-time - Large memory leak in kinsol nonlinear solver) updated by
- I tried the -daeMode (and with ida as time stepper, kinsol as …
- 13:17 Ticket #5551 (*unknown* - Cannot open the OMEdit internal Modelica documentation) updated by
- Unfortunately, the coredump is ~600MB in size. Even with high …
- 12:53 Ticket #5551 (*unknown* - Cannot open the OMEdit internal Modelica documentation) created by
- I just build openmodelica-git module in Archlinux straight from AUR. …
- 12:44 Ticket #5550 (Code Generation - Different size of long on windows / linux systems) updated by
- Those are for the Modelica side, and yes, it seems like a bug. For …
- 11:51 Ticket #5550 (Code Generation - Different size of long on windows / linux systems) created by
- Hi, I have the problem, that the same metamodelica code on different …
- 11:34 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- The conclusion of today's discussion is that most likely the set of …
- 11:31 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- Replying to casella: > - Some differentiated equations are …
- 11:30 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- @lochel, I guess it's more than that, and it's really more like I …
- 11:23 Ticket #5435 (OMEdit - Resetting OMEdit to default options) closed by
- fixed
- 11:08 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) updated by
- Summary of today's discussion: Lennart thinks that the additional …
- 11:06 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- Summary of today's discussion: the problem could be easily solved by …
- 10:33 Ticket #2773 (Backend - Linear tearing slower than not using it) updated by
- I think tearing for linear components is not in the master any more. …
- 10:04 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- Ok that is totally crazy since that commit is not reverted so it …
- 09:55 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- The commit to blame is 08ed260/OpenModelica which has …
- 09:36 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- I just compiled again the last commit from 24 June: …
- 09:30 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- does this compiler optimization added to the last nightly build? The …
- 09:20 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
- c2275ed/OpenModelica should work fine.
- 08:55 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- After today’s discussion with Karim, we think it might be related to …
- 08:52 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- @casella: I have looked at this yesterday for a couple of hours, I …
- 08:31 Ticket #4829 (Installation program - Windows installers fail SmartScreen checks) updated by
- @adeas31, I think we can self sign the installer for now until we buy …
- 07:21 Ticket #4829 (Installation program - Windows installers fail SmartScreen checks) updated by
- Since there is already some work done on #4504. I think is time now we …
2019-06-26:
- 18:12 Ticket #5549 (FMI - Cross compilation of FMUs for Win64 on Ubuntu is broken for some ...) updated by
-
Milestone changed
I guess we should get this to work in 2.0.0. Too much stuff and not … - 18:10 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- @adrpo, the previous Ubuntu nightly build worked, so the root cause is …
- 10:20 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- Ok. I can reproduce this bug on a Ubuntu 16.04 system. I will …
- 10:10 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- This is very strange, I have no idea why this happens. I will try to …
- 10:09 Ticket #5456 (OMEdit - OMEdit lost FMI export and Cpp support) closed by
- fixed: Thanks!
- 10:06 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- Tnks Adeel for the prompt reply
- 10:05 Ticket #5456 (OMEdit - OMEdit lost FMI export and Cpp support) updated by
- Yes, it works now.
- 09:59 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
-
Status, Owner, Component changed
- 09:58 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- running the script from command line I get this error: …
- 09:52 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- That is rather weird that it fails at …
- 09:50 Ticket #5549 (FMI - Cross compilation of FMUs for Win64 on Ubuntu is broken for some ...) created by
- While cross compilation from Ubuntu to Win64 generally works …
- 09:42 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- I found this files... if you need others information please give me …
- 09:29 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- where I can find it?
- 09:26 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
- Can you provide more details. The log files will be helpful.
- 09:23 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) updated by
-
Cc changed
- 09:22 Ticket #5548 (Interactive Environment - OMEdit crashes during startup) created by
- After the update of the nightly build version (update made @08.00 …
- 08:56 Ticket #5456 (OMEdit - OMEdit lost FMI export and Cpp support) updated by
- This is marked as blocker for 1.14. @rfranke can you please test this …
2019-06-25:
- 14:18 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
-
I tried a variant of
test.moswhich callstranslateModel… - 14:04 Ticket #5395 (OMEdit - OMEdit generates invalid displayUnit modifiers for arrays of parameters) updated by
-
Milestone changed
- 14:03 Ticket #5192 (OMEdit - OMEdit since 1.13 crashes if there are non-ASCII characters in the ...) updated by
- @igor please test again with the newest nightly.
- 14:01 Ticket #5519 (OMEdit - OMEdit does not update the graphical annotations of conections when ...) closed by
- fixed: Fixed in 08ed260/OpenModelica.
- 14:00 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
- That is very weird since all of them use the same compile script. I …
- 13:29 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- BTW, I found this additional information in an e-mail exchange with …
- 13:27 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- Replying to Karim.Abdelhak: > Replying to [comment:31 …
- 13:25 Ticket #5541 (OMEdit - CTRL + Home not working in OMEdit Text View) updated by
- Thanks
- 13:25 Ticket #5544 (OMEdit - OMEdit does not update the timestamp of .mo files when saving) closed by
- invalid: Replying to adrpo: > F5 is refresh in Windows (Explorer, …
- 13:11 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
-
About
resolveLoops, see this … - 13:04 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- Replying to casella: > In fact, if you take …
- 13:02 Ticket #5544 (OMEdit - OMEdit does not update the timestamp of .mo files when saving) updated by
- F5 is refresh in Windows (Explorer, browser, etc). Also right click in …
- 12:49 Ticket #5536 (OMEdit - Graphical layout of choices in a parameter menu) updated by
- Very old issue indeed. We are almost done with it, please follow …
- 12:47 Ticket #5544 (OMEdit - OMEdit does not update the timestamp of .mo files when saving) updated by
-
In fact, the
TestConnection.mofile I originally used to find … - 12:34 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- In fact, if you take (1)+(2)+(3)-(6)-(7) in comment:28, most terms …
- 12:16 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- From a physical point of view, the rectifier is built in a way that …
- 12:12 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
-
I had originally tried
-resolveLoopsto solve this issue, but to … - 12:02 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
- Replying to adeas31: > I think your model is failing for …
- 10:22 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- Replying to vitalij: > Maybe related to …
- 09:48 Ticket #5536 (OMEdit - Graphical layout of choices in a parameter menu) closed by
- duplicate: See #2079.
- 09:41 Ticket #5544 (OMEdit - OMEdit does not update the timestamp of .mo files when saving) updated by
- For me it does work as expected. Also I think it is more of a OS thing …
- 09:38 Ticket #5541 (OMEdit - CTRL + Home not working in OMEdit Text View) closed by
- fixed: Fixed in 04749d3/OpenModelica.
- 08:53 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- Maybe related to …
- 08:43 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
- I think your model is failing for some other known reason. Do you have …
- 08:28 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
-
Replying to adeas31:
>
FRANCE~1is expected. Good to … - 08:03 Ticket #5543 (NF API - OMEdit does not check if added connections are valid) updated by
-
Owner, Component, Milestone changed
Now that #5542 is fixed, this feature is less critical, because the … - 07:57 Ticket #5452 (Backend - Numerical issues due to missing index reduction) updated by
- @Karim, I managed to come up with a smaller model that reproduces the …
- 07:31 Ticket #5540 (OMEdit - plot window start) updated by
- Which version are you using? Please try the latest nightly build as …
- 07:04 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
-
FRANCE~1is expected. Can you rungetErrorString()afterwards to …
Note:
See TracTimeline
for information about the timeline view.
