Timeline
2019-04-04:
- 23:28 Ticket #2996 (Backend - This very simple circuit fails) updated by
-
Owner changed
- 23:26 Ticket #2689 (Backend - mapping of zero crossings to equations does not work properly) updated by
-
Status, Owner, Milestone changed
- 23:24 Ticket #2618 (Backend - Reinitial in algorithm section also continuos relations) updated by
-
Status, Owner changed
- 23:23 Ticket #2621 (Backend - dimension errors in Annex60.Controls.Continuous.Examples.SignalRanker) closed by
- fixed: Chattering (#2618) is still there, but the original issue of this …
- 23:21 Ticket #2573 (Backend - Angles for Modelica.Mechanics.MultiBody.Parts.FixedRotation not ...) closed by
- duplicate: See #2661
- 23:15 Ticket #2538 (New Instantiation - Support for partial derivatives of functions) updated by
- Simpler test model: […] Gives the following error with both OF and …
- 23:08 Ticket #2530 (Backend - translation error of model in comment1: "model MatricesExp....") updated by
- The issue reported in comment:2 is still there. Is it because …
- 22:52 Ticket #2520 (Backend - model including two SpringDamper blocks leads to compiler error) updated by
-
Status, Owner changed
@Karim, I guess you should have a look at this, looks quite fishy - 22:47 Ticket #2511 (Backend - Trouble loading Modelica Model in OpenModelica) closed by
- invalid: It doesn't make sense to simulate this model. You should connect some …
- 22:32 Ticket #2350 (Frontend - Experiment annotation ignored when using +s) closed by
- fixed: It seems this is now solved, the .xml file contains the following …
- 22:28 Ticket #2318 (Backend - Strange tuple in initial equation in Modelica.Blocks.Examples.Filter) closed by
- fixed: Given comment:12, I guess we can close this. Feel free to reopen if …
- 22:26 Ticket #2282 (Run-time - Dynamic State Selection doesn't work on simple planar pendulum model) updated by
-
Status, Owner changed
@Karim, maybe you want to give a look, since you're working on dynamic … - 22:04 Ticket #5320 (New Instantiation - Issue with binding equation types in the NF) closed by
- fixed: The model now simulates with the NF, see …
- 21:53 Ticket #4496 (New Instantiation - Complex 'sum' does not work) updated by
-
Owner changed
Running this model with the latest nightly an the NF I now obtain this … - 21:45 Ticket #4157 (Backend - Problems with complex numbers) updated by
-
if_complex_if_expressionnow works fine with the NF. … - 21:41 Ticket #2484 (New Instantiation - Expandable connector resolution misses components) updated by
- Issue still valid
- 21:37 Ticket #4071 (New Instantiation - Performance of new front end) updated by
-
Component changed
- 21:37 Ticket #4071 (New Instantiation - Performance of new front end) closed by
- fixed: Closing this ticket, the performance of the NF is more than one order …
- 21:35 Ticket #4054 (Frontend - Binding equation does not accept reduced-outputs function calls) closed by
- fixed: This model works fine with the NF and the latest nightly build.
- 21:34 Ticket #3944 (New Instantiation - Check of models with partial Medium packages fails) updated by
-
Owner, Component, Description, Milestone changed
The issue is still valid, with the NF one gets: […] - 21:28 Ticket #4158 (New Instantiation - OMC does not detect illegal use of pre() in when clause conditions) closed by
- fixed: The new front-end now issues the following error message: […] which …
- 21:27 Ticket #4172 (Frontend - Medium propagation fails in ...) closed by
- fixed: After 11 months, the situation has much improved, 71% of models now …
- 21:21 Ticket #3844 (Frontend - Unnecessary array instantiations) updated by
- It's a bit unclear to me what remains to be done here, and if it's a …
- 21:11 Ticket #2467 (Frontend - Inner outer functions do not work properly) closed by
- fixed: This example now runs successfully with the new front end. Will be the …
- 21:07 Ticket #2361 (Frontend - Bad handling of connectors derived from records) closed by
- fixed: The …
- 21:03 Ticket #3186 (New Instantiation - Partial binding of record sub-components in functions are lost) updated by
-
Component changed
- 21:02 Ticket #3535 (Interactive Environment - duplicate function names are not detected) updated by
-
Component changed
- 21:00 Ticket #2387 (New Instantiation - Operator overloading fails for matrices) updated by
-
Component changed
- 21:00 Ticket #2387 (New Instantiation - Operator overloading fails for matrices) updated by
-
Status, Owner changed
@mahge930 no longer working on this - 20:27 Ticket #5422 (OMEdit - Fail to connect Modelica.Icons.SignalBus components (expandable connectors)) updated by
-
Owner changed
I guess @adeas31 should have a look then. - 20:25 Ticket #5417 (Build Environment - Issue with linking dynamic libraries on macOS high Sierra while ...) closed by
- fixed: Feel free to reopen if there are still issues
- 19:46 Ticket #5422 (OMEdit - Fail to connect Modelica.Icons.SignalBus components (expandable connectors)) updated by
- This has nothing to do with the new API. I will have a look on how …
- 19:19 Ticket #5417 (Build Environment - Issue with linking dynamic libraries on macOS high Sierra while ...) updated by
- The fix seems to be working for my system!
- 18:42 Ticket #5421 (FMI - New FMU (OMEdit 1.13.2) failed load from cffi in lisp) updated by
- What is the actual problem? What is the error? Not working how? - Does …
- 18:25 Ticket #5422 (OMEdit - Fail to connect Modelica.Icons.SignalBus components (expandable connectors)) updated by
-
Priority, Status, Component, Owner, Milestone changed
This should be checked with the new API - 18:22 Ticket #5421 (FMI - New FMU (OMEdit 1.13.2) failed load from cffi in lisp) updated by
-
Milestone changed
- 18:21 Ticket #5337 (OMEdit - Cannot switch to Text View if preferredView="info" is selected) updated by
- Replying to adeas31: > > However, as a user it makes more …
- 14:40 Ticket #4240 (Interactive Environment - Duplicate of model fails) closed by
- fixed: I suppose this ticket is resolved now.
- 14:23 Ticket #5422 (OMEdit - Fail to connect Modelica.Icons.SignalBus components (expandable connectors)) created by
- The GUI for connecting expandable connectors (extending from …
- 12:43 Ticket #4922 (OMEdit - Tool "import ngspice netlist" not working) closed by
- fixed: The menus are documented now. 0c638e3/OpenModelica-doc.
- 12:39 Ticket #5138 (OMEdit - parameter tab not shown for msl multibody models) closed by
- duplicate: Duplicate of #2661.
- 10:31 Ticket #5337 (OMEdit - Cannot switch to Text View if preferredView="info" is selected) updated by
-
Well I can sync the
Documentation Browserwith the current model. … - 09:55 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
- Done in 516aa19/OpenModelica.
- 04:52 Ticket #5421 (FMI - New FMU (OMEdit 1.13.2) failed load from cffi in lisp) created by
- Thank you for your great work. I am working on Debian 64bit on a …
2019-04-03:
- 20:45 Ticket #5415 (OMEdit - Make switching to plotting perspective at the end of the simulation ...) closed by
- invalid: Oops, I didn't notice that. Works fine.
- 18:45 Ticket #4802 (OMEdit - Documentation html not composed correctly) updated by
- I just tested it with Ubuntu 18.04.2 LTS Qt 5.9.5 Everything seems …
- 15:38 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
- Replying to adeas31: > I prefer that diff algorithm should …
- 14:58 Ticket #5420 (FMI - All Opened Libraries Are Included in Resource Folder FMU) created by
- […] Exporting model as FMU resulted in all libraries that …
- 14:34 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
- Thank you @casella and @adeas. Indeed I exactly hoped that the issue …
- 13:57 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
- I prefer that diff algorithm should work always without any failures. …
- 13:36 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
-
Owner changed
I think this is one of those cases where we should radically change … - 13:26 Ticket #5359 (OMEdit - Some simulation setting annotations used only once per session) closed by
- fixed: Fixed in 8fc9c91/OpenModelica.
- 12:58 Ticket #5377 (Run-time - OMEdit sometimes does not refresh result file and/or plots after ...) closed by
- fixed
- 12:55 Ticket #5377 (Run-time - OMEdit sometimes does not refresh result file and/or plots after ...) updated by
- Replying to adeas31: > @RSchiemann I believe this is the …
- 12:51 Ticket #5415 (OMEdit - Make switching to plotting perspective at the end of the simulation ...) updated by
- There is already an option for it in …
- 11:33 Ticket #5419 (*unknown* - Interactive simulation crashing due to missed deadlines for all but ...) created by
- I currently try to get to run interactive simulations decently, but I …
- 11:25 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
- Replying to adeas31: > This message is shown when the diff …
- 09:25 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- Use this https://github.com/OpenModelica/OpenModelica/pull/115 from now on.
- 09:11 Ticket #5377 (Run-time - OMEdit sometimes does not refresh result file and/or plots after ...) updated by
- Replying to adeas31: > @RSchiemann I believe this is the …
- 07:59 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- OMEdit is moved to OpenModelica git repository.
- 07:56 Ticket #5333 (OMEdit - Autocompletion of annotations) updated by
- Is OpenModelica/OMEdit repo archival "by design" or "by accident"? …
- 07:00 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
-
Owner, Component changed
This message is shown when the diff algorithm fails. In that case … - 06:55 Ticket #5418 (OMEdit - Avoid confusing error messages from the solvers) updated by
- Those settings are for the messages shown in Messages Browser but yes …
- 06:35 Ticket #5418 (OMEdit - Avoid confusing error messages from the solvers) updated by
- Replying to adeas31: > I can change warnings to lets say …
2019-04-02:
- 19:54 Ticket #5418 (OMEdit - Avoid confusing error messages from the solvers) updated by
- This is possible as long as the solver is setting the proper stream. …
- 17:45 Ticket #5418 (OMEdit - Avoid confusing error messages from the solvers) created by
- Oftentimes, solvers encounter problems during the initialization or …
- 14:25 Ticket #4842 (OMEdit - Variable browser in OMEdit confuses the display unit when loading ...) closed by
- fixed: The exported csv file has no information about the unit and yes it now …
- 14:06 Ticket #5216 (OMEdit - Select timestep/frame resolution in animations) updated by
- @Volker the OMEdit git repo is used anymore. It is moved inside the …
- 14:00 Ticket #5216 (OMEdit - Select timestep/frame resolution in animations) updated by
- As a quick fix, I would increase the number of increments of the …
- 13:44 Ticket #4955 (OMEdit - Bad OMEdit behaviour when requiring a wrong duplication twice) closed by
- fixed: Fixed in 707735d/OpenModelica.
- 11:22 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- DASSL and IDA were both compiled -O2 in this case. -O3 usually has …
- 10:49 Ticket #5417 (Build Environment - Issue with linking dynamic libraries on macOS high Sierra while ...) updated by
- Should be fixed by …
- 10:45 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- Replying to sjoelund.se: > Yes, IDA in ODE mode is very …
- 07:45 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- Yes, IDA in ODE mode is very similar to dassl performance. Actually, …
- 07:40 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- Replying to sjoelund.se: > The system is quite small for …
- 07:38 Ticket #5216 (OMEdit - Select timestep/frame resolution in animations) updated by
- Yes, I'm definitely referring to the slider. Even for short …
- 07:37 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- Replying to sjoelund.se: > Well, we are using DASSL in …
- 06:44 Ticket #5216 (OMEdit - Select timestep/frame resolution in animations) updated by
- Are you referring to the slider? The slider has a fixed number of …
- 06:08 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- IDA […] DASSL […] The system is quite small for DoublePendulum …
- 06:02 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- Well, we are using DASSL in ODE mode, so that probably has something …
2019-04-01:
- 20:39 Ticket #5409 (OMOptim - can't compile) updated by
- Thank for your suggestions. The system compiles the file correctly …
- 16:48 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- Replying to sjoelund.se: > No, you can't take the …
- 16:06 Ticket #5414 (OMSimulator - Unsolvable Error pertaining to variable not found within model) updated by
- After reading what you and others have said about my issue on …
- 13:18 Ticket #4716 (OMEdit - OMEdit - Simulation does not finish / crashes) closed by
- fixed: I do not encounter the problem anymore. Sorry for the delay.
- 13:06 Ticket #4180 (OMEdit - Make diff algorithm move annotation section to the end) updated by
- Not sure if I understand what you mean. Can you explain more?
- 13:04 Ticket #4716 (OMEdit - OMEdit - Simulation does not finish / crashes) updated by
- Is this issue still valid?
- 12:23 Ticket #4988 (OMEdit - Array plots are not updated) updated by
-
Status, Owner changed
- 12:18 Ticket #5060 (OMEdit - Mac OMEdit doesn't start) closed by
- fixed: I believe this issue is no longer valid. Feel free to reopen the ticket.
- 11:56 Ticket #5216 (OMEdit - Select timestep/frame resolution in animations) updated by
-
Status, Owner changed
- 11:42 Ticket #3559 (OMNotebook - OMNotebook while generating *init.xml use locale LC_NUMERIC options) closed by
- fixed: Closing this ticket assuming the issue was fixed and no feedback was given.
- 11:39 Ticket #4896 (Code Generation - Special characters in directory cause simulation failure) closed by
- fixed: Feel free to reopen the ticket if the issue is still valid.
- 11:35 Ticket #5195 (Initialization - Division by zero during the initialization via file (.mat), of the ...) updated by
-
Cc, Status, Component, Owner changed
- 11:33 Ticket #5247 (OMEdit - Opening OMSimulator projects makes OMEdit slower and unstable) updated by
-
Cc changed
@lochel do you encounter any of the issues described in the … - 11:31 Ticket #5314 (OMEdit - Openmodelica corrupts files during save operation) closed by
- invalid: Closing this until further details are given.
- 11:24 Ticket #5276 (Interactive Environment - Issue with OMEdit formatting due to bug in diffModelicaListings) updated by
-
Status, Owner, Component changed
- 11:22 Ticket #5309 (Run-time - Descriptions of the meaning of Complex variable are lost in the ...) updated by
-
Cc, Status, Component, Owner changed
> This is due to the fact that currently only the comments of the … - 09:14 Ticket #5409 (OMOptim - can't compile) updated by
- The problem is that ParadisEO uses cmake, which never works as it …
- 08:02 Ticket #5417 (Build Environment - Issue with linking dynamic libraries on macOS high Sierra while ...) updated by
- As far as I know we no longer compile those .dylib files; only .a. So …
- 06:16 Ticket #5417 (Build Environment - Issue with linking dynamic libraries on macOS high Sierra while ...) updated by
- Configuration run with: 'CC=clang' 'CXX=clang++' '--without-corba' …
- 06:06 Ticket #5417 (Build Environment - Issue with linking dynamic libraries on macOS high Sierra while ...) created by
- At the end of bootstrapping I get: […] I think the issue is …
- 05:02 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- No, you can't take the difference between the total time and time …
2019-03-31:
- 19:40 Ticket #5416 (OMEdit - disable a toolbar) updated by
-
Description changed
- 19:37 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) updated by
- System: Microsoft Windows 10 Home x64 Software: OMEdit v1.13.0-dev (64 …
- 00:15 Ticket #5416 (OMEdit - disable a toolbar) updated by
-
Description changed
- 00:04 Ticket #5416 (OMEdit - disable a toolbar) created by
- Recently OMEdit has added a toolbar in the variables browser. that was …
2019-03-30:
- 19:39 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) updated by
- sullivbj, could you please specify your Windows version, 32/64bit, …
- 16:06 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
- Replying to casella: > and I am no longer alarmed by it, …
- 15:08 Ticket #5414 (OMSimulator - Unsolvable Error pertaining to variable not found within model) updated by
- Replying to KieranF <kieran.fung@…>: > I'm currently …
- 14:55 Ticket #5415 (OMEdit - Make switching to plotting perspective at the end of the simulation ...) created by
- Some time ago, a featue was introduced in OMEdit that brings the …
- 14:31 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) updated by
-
Priority, Status, Component, Owner changed
I also often get this issue. I'm now used to this behaviour, that my … - 14:27 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) updated by
- Thanks @ceraolo, this has been very helpful!
- 14:24 Ticket #5411 (OMSimulator - Unusual issue involving a simulation plot) closed by
- duplicate: Replying to trista.arinomo@…: > I think it is related to …
- 12:37 Ticket #5409 (OMOptim - can't compile) updated by
- No problem. I'm sorry I can't find a way to help with it, the problem …
2019-03-29:
- 19:58 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) updated by
- any updates on this error? I still can't get the ncDataReader2 example …
- 17:49 Ticket #5414 (OMSimulator - Unsolvable Error pertaining to variable not found within model) created by
- I'm currently working on building a heat recovery steam generator and …
- 16:59 Ticket #4839 (OMEdit - Badly wrong visualization in OMEdit in a simple case) updated by
- I have an even worse example of this bad behaviour. Today a student of …
- 15:32 Ticket #5377 (Run-time - OMEdit sometimes does not refresh result file and/or plots after ...) updated by
- Replying to adeas31: > @RSchiemann I believe this is the …
- 13:21 Ticket #5377 (Run-time - OMEdit sometimes does not refresh result file and/or plots after ...) updated by
- @RSchiemann I believe this is the same issue as it was in #5412. …
- 13:19 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) closed by
- fixed: Fixed in 03aae16/OMEdit.
- 10:49 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) updated by
-
Status, Owner, Component changed
- 10:40 Ticket #5377 (Run-time - OMEdit sometimes does not refresh result file and/or plots after ...) updated by
- Replying to casella: > I'm currently using 1.13.2 for a …
- 10:38 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) updated by
- Yes, i can reproduced this bug per your description. After manually …
- 09:52 Ticket #5410 (Interactive Environment - Properly indent dragged-and-dropped components) updated by
- I consider it a feature if it has a constant behavior. It does indent …
- 09:03 Ticket #5196 (FMI - Memory leak with inline arrays in when clauses) updated by
- #5406 is the same bug. You just need to free the pool at some …
- 07:33 Ticket #5413 (Interactive Environment - Erroneous huge message when duplicating) created by
- 1) open test.mo 2) duplicate EVBasic in an empty path. A huge, …
- 07:18 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) updated by
-
Description changed
- 07:18 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) updated by
-
Description changed
- 07:17 Ticket #5412 (OMEdit - A case of missed switch to plotting perspective) created by
- I have a repeatable case in which OMEdit does not switch to plotting …
- 06:15 Ticket #5411 (OMSimulator - Unusual issue involving a simulation plot) updated by
- I think it is related to #5377. There is some discussion thers that …
- 06:08 Ticket #5263 (Build Environment - [FMI] FMUs are linked with libModelicaExternalC compiled as a dynamic ...) updated by
- https://github.com/OpenModelica/OMCompiler/pull/3015 Disabling hdf5 …
2019-03-28:
- 21:57 Ticket #5411 (OMSimulator - Unusual issue involving a simulation plot) created by
- In my experience, consistency has never been one of OpenModelica's …
- 16:40 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
-
Cc changed
Replying to sjoelund.se: > The problem is that all of … - 13:22 Ticket #5369 (OMEdit - Crashing of openmodelica while operating) closed by
- invalid: Closing this until input is given.
- 13:20 Ticket #5389 (Code Generation - Creation of Complex array fails) updated by
- Note though, the following works: […]
- 13:03 Ticket #5408 (Interactive Environment - GUI annotations are not inherited correctly) updated by
-
So that's
isExperimentand the corresponding getter. Note that we … - 12:40 Ticket #5410 (Interactive Environment - Properly indent dragged-and-dropped components) updated by
- Not a bug. A feature you want. It just does diffs. It doesn't format …
- 12:33 Ticket #5406 (Run-time - Memory Leak in memory_pool) updated by
- Well, we should be able to call …
- 12:22 Ticket #5403 (New Instantiation - Incorrect treatment of clocked when equations in the new instantiation) closed by
- fixed: Fixed in 851e5696, with some …
- 10:08 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- […] So... I guess the Jacobian calculation calls functionDAE so …
- 08:44 Ticket #5353 (Run-time - Enhance the LOG_STATS output to tell apart time spent by the solver ...) updated by
- The problem is that all of these timers overlap. There is no timer for …
- 08:38 Ticket #5385 (New Instantiation - -d=evaluateAllParameters should not evaluate non-fixed parameters) updated by
- For the frontend, yes. The backend has additional logic to evaluate …
- 06:59 Ticket #5409 (OMOptim - can't compile) updated by
- You're right, sorry, the Readme is apparently for a much older version …
Note:
See TracTimeline
for information about the timeline view.
