Timeline
2019-07-19:
- 23:16 Ticket #4138 (New Instantiation - New FrontEnd) updated by
-
Description changed
- 22:27 Ticket #5288 (*unknown* - Achieve successful simulation of 100% MSL 3.2.3 models with NF) updated by
- List of remaining open issues: - #5328 ODE solver behaves erratically …
- 21:54 Ticket #5288 (*unknown* - Achieve successful simulation of 100% MSL 3.2.3 models with NF) updated by
- There are currently only 7 MSL 3.2.3 models that do not simulate with …
- 21:33 Ticket #5458 (Backend - Unknowns with explicitly set start attributes should be preferred as ...) closed by
-
fixed:
removeEqualFunctionCallswas reactivated in … - 21:26 Ticket #5600 (Backend - removeEqualFunctionCalls should be better documented and merged with ...) created by
-
In the process of fixing #5458, the
removeEqualFunctionCallswas … - 18:46 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
- This may be the most wanted missing feature in OMEdit, so I guess many …
- 18:11 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
-
Owner changed
Martin, what do you think? - 18:10 Ticket #5598 (New Instantiation - redeclaration of input as output with NF) updated by
- From a user's perspective, I can't really see the point in changing an …
- 16:56 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- The following work around allows it to no longer fail to install using …
- 15:41 Ticket #5261 (Build Environment - OM Won't build under MacOS 10.14) updated by
- It seems that the OMSI issue is just that a relative path is being …
- 13:48 Ticket #5598 (New Instantiation - redeclaration of input as output with NF) updated by
- Yes, redeclarations must be subtypes as far as I understand, and 6.3 …
- 13:47 Ticket #5599 (Backend - Backend rerun initial if equation with assert at reinit phase) updated by
-
Priority, Milestone changed
Probably uncritical for most users, but yet totally wrong behaviour, … - 13:43 Ticket #5599 (Backend - Backend rerun initial if equation with assert at reinit phase) updated by
-
Description changed
- 13:41 Ticket #5294 (Initialization - Backend does not support initial if equation with assert) closed by
- fixed: Closing the ticket as the original problem is now solved.
- 13:32 Ticket #5598 (New Instantiation - redeclaration of input as output with NF) updated by
-
Status, Owner, Component changed
From what I understand of Section 6.3 of the specification, if you … - 13:28 Ticket #5599 (Backend - Backend rerun initial if equation with assert at reinit phase) created by
- There seems to be a related bug with the initial if equation with …
- 13:22 Ticket #5139 (Run-time - Initialization failures due to min/max and assert() violations do not ...) updated by
- Sorry for the delay, I had lost track of this issue. I tried …
- 13:13 Ticket #5534 (New Instantiation - NF fails checkModel on an otherwise sane model) updated by
- Thanks Per, I'll use the workaround till you complete the new unit …
- 13:01 Ticket #5534 (New Instantiation - NF fails checkModel on an otherwise sane model) updated by
- The issue with the new model is the same as before, the workaround of …
- 11:42 Ticket #5598 (New Instantiation - redeclaration of input as output with NF) created by
- Hello, The following error message occurred during testing with the …
- 07:21 Ticket #5441 (OMEdit - OMEdit toolbars) closed by
- fixed: Done in 981f8ab/OpenModelica.
2019-07-18:
- 22:02 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- BTW, I just retried with the latest nightly build. The simplified …
- 21:46 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- Replying to Karim.Abdelhak: > @Francesco, could you check …
- 21:25 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) reopened by
- 21:25 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) updated by
- More bogus messages: opening Modelica.Fluid.Examples.HeatingSystems …
- 21:21 Ticket #5597 (New Instantiation - Two examples of the new Modelica.Electrical.Batteries package do not ...) updated by
-
Priority, Owner, Component, Milestone changed
@perost, is this yet another case of record issues with the old FE? - 21:19 Ticket #5345 (OMEdit - omc-based FMI import in OMEdit) updated by
-
Cc changed
- 21:18 Ticket #5345 (OMEdit - omc-based FMI import in OMEdit) updated by
- Replying to adeas31: > I just discussed this with Lennart …
- 21:08 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- Flag is fine, thanks!
- 16:16 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- Replying to casella: > @Karim, before you leave for your …
- 15:04 Ticket #5534 (New Instantiation - NF fails checkModel on an otherwise sane model) reopened by
- The issue is back... Please load the attached package …
- 14:38 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
- @Karim, before you leave for your holidays, could you summarize a plan …
- 14:36 Ticket #5459 (Backend - Unnecessary choice of dynamic state selection leads to code generation ...) updated by
-
Cc changed
- 14:27 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- Or you can ask @adeas31 to provide an actual dialog for it :)
- 12:48 Ticket #4302 (OMEdit - Distorted text in OMEdit icons) updated by
-
Cc changed
- 12:26 Ticket #5382 (Backend - Simcode scales badly for models with large-sized arrays and events) updated by
-
Status, Owner, Component changed
- 12:15 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
-
Run OMEdit with debug command line option i.e.,
./OMEdit --Debug=true. - 11:42 Ticket #5592 (New Instantiation - Issue with NF and index reduction) updated by
- Nice result indeed, see …
- 11:11 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- OK, so how to I get it turned on in OMEdit?
- 11:10 Ticket #5382 (Backend - Simcode scales badly for models with large-sized arrays and events) reopened by
- I agree with Martin's judgement that there is no memory leak here. The …
- 11:10 Ticket #4146 (*unknown* - Summary of omc scaling issues) updated by
-
Description changed
- 10:47 Ticket #5597 (New Instantiation - Two examples of the new Modelica.Electrical.Batteries package do not ...) created by
- I tested the new …
- 10:24 Ticket #5345 (OMEdit - omc-based FMI import in OMEdit) updated by
- My university will strong need in the near future to be able to …
- 09:06 Ticket #5592 (New Instantiation - Issue with NF and index reduction) closed by
- fixed: With the fix in b7e35afb the model …
- 08:39 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- This is an OMEdit executable command line flag.
- 08:33 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
-
What is the flag/OMEdit option to enable this? I saw a
--Debug… - 07:59 Ticket #5345 (OMEdit - omc-based FMI import in OMEdit) updated by
-
Milestone changed
I just discussed this with Lennart and it seems we need further … - 07:45 Ticket #5382 (Backend - Simcode scales badly for models with large-sized arrays and events) closed by
-
wontfix: My interpretation of Martin's comment is that it
won't fixso I am … - 07:26 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- Replying to adrpo: > @adeas31, can we have a setting in …
- 07:10 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) closed by
- fixed: Yeah I fixed that yesterday as well but forgot to merge the pull …
- 05:32 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
- Hope you will also add automatically deletion of connecting lines, as …
- 03:53 Ticket #5540 (OMEdit - plot window start) updated by
- I am using 1.13.2 I went through the #5412 . i had the similar issue …
- 00:44 Ticket #5596 (New Instantiation - The NF does not report the flattening process to the debugger) updated by
-
Description changed
2019-07-17:
- 21:39 Ticket #5596 (New Instantiation - The NF does not report the flattening process to the debugger) created by
- When debugging equations from models compiled with the old FE, the …
- 21:28 Ticket #5595 (Backend - Equations involving semiLinear are not solved correctly for tearing) created by
- Please check …
- 20:57 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) closed by
- fixed: Fixed in a42b26/OpenModelica.
- 20:32 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- I somehow messed up the first PR but the second …
- 16:17 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- As I commented in the pull request, it is only protected top-level …
- 14:40 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
- deleted comment
- 14:14 Ticket #5592 (New Instantiation - Issue with NF and index reduction) updated by
- Good :) Please proceed with the merging of PR 336, so we can see the …
- 13:29 Ticket #5592 (New Instantiation - Issue with NF and index reduction) updated by
- I noticed that the OF had a list of lower order derivatives in the …
- 12:56 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
- Fixed the crash in 9587ed9/OpenModelica.
- 12:54 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- I created a pull request where toplevel inputs are considered unknown …
- 12:28 Ticket #5594 (FMI - Some Model C-files are not included in modelDescription.xml) updated by
-
Milestone changed
- 12:09 Ticket #5594 (FMI - Some Model C-files are not included in modelDescription.xml) created by
- Exporting a model with 5804 equations as a FMU resulting in several …
- 10:25 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- Replying to casella: > So, I understand the equation …
- 10:20 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
-
Ah sorry, i just forgot to use
getErrorString();and was led … - 09:02 Ticket #5537 (OMEdit - Multiple parameter values in icon layer arent displayed correct) closed by
- fixed: Fixed in 3ea3db0/OpenModelica.
- 09:02 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) reopened by
- Unfortunately, I still get some bogus messages: […] when opening …
- 08:57 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- Replying to Karim.Abdelhak: > I tried to simulate the …
- 08:49 Ticket #5593 (OMEdit - DXF shapes in animations are not displayed correctly) updated by
-
Description changed
- 08:47 Ticket #5593 (OMEdit - DXF shapes in animations are not displayed correctly) created by
- Steps to reproduce - Run …
- 08:44 Ticket #5567 (OMEdit - The engine V6 animation is completely black) updated by
- Replying to vwaurich: > Nevertheless, the scaling of the …
- 08:18 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- I tried to simulate the model from OMEdit and from command line using …
- 08:15 Ticket #5567 (OMEdit - The engine V6 animation is completely black) closed by
- fixed: Replying to vwaurich: > I added the complete AutoDesk …
- 08:04 Ticket #5562 (Installation program - Windows installation is slow because of anti-malware checks?) closed by
- wontfix: I normally do not install any system library. I tried to disable …
- 07:47 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- Replying to Karim.Abdelhak: > How should this be detected? …
- 06:53 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
- How should this be detected? It is a protected input which is only …
2019-07-16:
- 21:52 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) updated by
-
Status, Owner, Component changed
This isn't a frontend issue, it's the backend that counts … - 21:07 Ticket #5592 (New Instantiation - Issue with NF and index reduction) created by
-
Please check
ModelicaTest.Rotational.AllComponents. It runs fine … - 20:45 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) closed by
- invalid: OK, most likely a frontend issue, see #5591.
- 20:44 Ticket #5591 (Backend - Protected top-level input connectors are not handled correctly by the NF) created by
- Please run the following test case […] OMEdit outputs two red error …
- 20:15 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
- Ah i see, but this is a problem in the frontend or backend? It does …
- 14:10 Ticket #5567 (OMEdit - The engine V6 animation is completely black) updated by
- I added the complete AutoDesk color map. …
- 14:00 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
- Replying to Karim.Abdelhak: > I don't know if i understand …
- 13:54 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) closed by
- fixed: OK. I'm going to close this ticket because the original issue is now …
- 13:53 Ticket #5590 (Backend - Bad dynamic state selection leads to singular initialization) created by
- Consider …
- 12:21 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to casella: > Replying to [comment:23 …
- 12:05 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) updated by
- Very nice, no more bogus warnings :)
- 12:04 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
- Works fine with the latest nightly, thanks!
- 12:01 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > Looking at the latest test …
- 11:59 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > I ran following .mos file: …
- 11:43 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to casella: > Replying to [comment:22 …
- 11:40 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
- I don't know if i understand this correctly, isn't an input supposed …
- 11:31 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > All models can be compiled …
- 11:26 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) updated by
-
Summary changed
- 10:58 Ticket #5589 (Backend - Protected top-level input connectors are not handled correctly by the ...) created by
- Please run the following test case […] OMEdit outputs two red error …
- 10:42 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Looking at the latest test result changes from …
- 10:20 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
- The issue here is that when we delete a res-box its connecting lines …
- 09:38 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) updated by
-
The only optimization running before the module
evaluateParameters… - 09:24 Ticket #4992 (Testing Framework - Should we skip some versions of the Buildings library in Hudson ...) updated by
- I'm also strongly in favor of removing old libraries. They are no …
- 09:22 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) updated by
-
Priority changed
Let's see if we can push this in 1.14.0, OMEdit should never crash. - 09:15 Ticket #5584 (OMEdit - Parameter table editor) closed by
- duplicate: See #5407
- 09:13 Ticket #2894 (OMEdit - Summary of improvements for OMEdit GUI usability) updated by
-
Description changed
- 09:11 Ticket #5583 (OMEdit - Conditional components) closed by
- duplicate: Toni, these are indeed very old issues, see #2081, #2661. Ultimately, …
- 09:03 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) updated by
- Replying to Karim.Abdelhak: > …
- 08:35 Ticket #5586 (FMI - FMU info) updated by
- This is basically a matter of integration. We plan to improve the …
- 08:18 Ticket #5587 (Backend - Bad value for interpolation in delayImpl) updated by
- I close this ticket since the behavior of the delay operator is …
- 08:11 Ticket #5587 (Backend - Bad value for interpolation in delayImpl) closed by
- fixed
- 07:38 Ticket #5586 (FMI - FMU info) updated by
- Just a small addition to my comment 8. I think that it is an …
- 04:01 Ticket #4992 (Testing Framework - Should we skip some versions of the Buildings library in Hudson ...) updated by
- @sjolund.se, @adrpo: Buildings 6.0.0 has been released: …
2019-07-15:
- 21:05 Ticket #5586 (FMI - FMU info) updated by
- Replying to lochel: > You could export your Modelica …
- 19:40 Ticket #5588 (OMEdit - Deleting submodel crashes OMEdit) created by
- Steps to reproduce: - load and open Test - open RL_Q - delete QSensor …
- 13:42 Ticket #5587 (Backend - Bad value for interpolation in delayImpl) created by
- The following example using delay operator is not properly handled …
- 13:42 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- All models can be compiled and simulated now, although the electrical …
- 10:04 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
-
Inlining function calls with
InlineAfterIndexReductionbefore … - 08:49 Ticket #5586 (FMI - FMU info) updated by
- You could export your Modelica models as model exchange FMUs and then …
- 08:19 Ticket #5586 (FMI - FMU info) updated by
- Replying to lochel: > I think this information is already …
- 06:10 Ticket #5586 (FMI - FMU info) updated by
- I think this information is already available in OMSimulator: …
2019-07-14:
- 17:18 Ticket #5586 (FMI - FMU info) updated by
-
Priority changed
- 17:17 Ticket #5586 (FMI - FMU info) updated by
- well, I' not an expert of FMUs and I don't exactly know the meaning …
- 16:35 Ticket #5586 (FMI - FMU info) updated by
-
Description changed
2019-07-13:
- 22:42 Ticket #5581 (FMI - FMU - ME accuracy) updated by
- The problem seems to be not in the FMU, but in the way the FMU is used …
- 22:32 Ticket #5586 (FMI - FMU info) updated by
-
Description changed
- 22:30 Ticket #5586 (FMI - FMU info) created by
- Consider the enclosed FMU. When loaded from Dymola the following very …
- 18:19 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- @adeas31, can we have a setting in OMEdit to fflush the log after each …
- 18:06 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- Ok. Nevermind, I can reproduce it when opening Modelica.Media.Air.
- 18:00 Ticket #5575 (NF API - Opening Modelica.Media packages in OMEdit is still slow because of ...) updated by
- I cannot reproduce this. For me opening Modelica.Media takes 1-2 …
- 09:47 Ticket #5581 (FMI - FMU - ME accuracy) updated by
-
Description changed
- 09:39 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) closed by
- fixed
- 06:22 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) closed by
- fixed
- 05:46 Ticket #5585 (OMEdit - Parameter record editor) created by
- Dear OM-developers, using models with a large number of parameters is …
- 05:37 Ticket #5584 (OMEdit - Parameter table editor) created by
- Dear OM-developers, parameter tables are a great possibility to …
- 05:25 Ticket #5583 (OMEdit - Conditional components) created by
- Dear OM-developers, conditional connectors (depending on a Boolean …
- 04:10 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) updated by
-
--evaluateProtectedParameters=trueonly affects the backend … - 04:04 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
- Should be fixed with …
2019-07-12:
- 23:29 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to casella: > What about preventing the implicit …
- 22:24 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
-
I would add
GenerateEvents, which clearly has a structural … - 22:20 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- Replying to Karim.Abdelhak: > One solution would be to …
- 21:57 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
- I updated the module, these are currently the structural annotations: …
- 19:31 Ticket #5565 (NF API - OMEdit generates bogus warnings about missing inner declarations when ...) updated by
-
Component changed
Should be fixed by PR: … - 19:26 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) updated by
-
Cc changed
@lochel, @Karim, I couldn't figure out your latest comment in ticket … - 19:24 Ticket #5581 (FMI - FMU - ME accuracy) updated by
-
Priority changed
- 19:22 Ticket #5582 (New Instantiation - The annotation InlineAfterIndexReduction is not included in the shown ...) created by
- If one tries to flatten this model with {{{-d=newInst …
- 19:08 Ticket #5577 (NF API - Translation Error When Export FMU Using -d=newInst) closed by
- fixed: Fixed in 6bd362/OpenModelica.
- 17:29 Ticket #5571 (Interactive Environment - NF API can't fetch bitmap annotation) closed by
- fixed: Fixed with 46e99d/OpenModelica.
- 16:24 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- In addition to what @lochel said i will point out the following: If …
- 15:27 Ticket #5581 (FMI - FMU - ME accuracy) created by
- I'm not aware of possible reasons for which a simulation containing a …
- 15:09 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- After spending a lot of time on this issue, we came up with a minimal …
- 13:16 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- We are trying to adhere strictly to the specification. From this point …
- 13:12 Ticket #5579 (New Instantiation - New Frontend does not check for circular dependencies in parameter bindings) updated by
- Replying to Karim.Abdelhak: > Any thoughts on the second …
- 13:12 Ticket #5580 (Backend - --evaluateProtectedParameters should default to true) created by
- I scanned the specification looking for the various meanings of …
- 12:44 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- @Karim I'm trying to make sense of this ticket, but I need some help …
- 12:29 Ticket #5569 (OMEdit - Changes to additional translation flags are often ignored until OMEdit ...) closed by
- fixed: OK, I missed that, thanks!
- 09:13 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
- The old frontend behaves differently from the new frontend here, thats …
- 09:10 Ticket #5170 (Backend - GenerationOfFMUs examples in the MSL are broken because of ...) updated by
-
Cc changed
- 06:28 Ticket #5448 (Documentation - OMEdit fails to open model, previously Totally Saved) updated by
- Well. It might be that OMEdit should ask the user if the file should …
Note:
See TracTimeline
for information about the timeline view.
