Timeline
2020-11-24:
- 21:39 Ticket #6201 (Run-time - Acos in implicit function, failing to solve non-linear system) updated by
- Replying to casella: > Replying to [comment:10 …
- 19:07 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- Replying to adeas31: > I also can't reproduce this. > > …
- 19:02 Ticket #6243 (New Instantiation - Issues with partial packages in Chemical library) created by
- Please run …
- 19:01 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- I enclose the settings we use (OMedit settings.pdf), with evidence …
- 18:52 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
- The same issue is reported here. …
- 18:37 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- Replying to adeas31: > I also can't reproduce this. Me …
- 18:30 Ticket #6201 (Run-time - Acos in implicit function, failing to solve non-linear system) updated by
- Incidentally, for the same reasons I would consider even this problem …
- 18:27 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- I also can't reproduce this. @ceraolo did you make the change via the …
- 18:06 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- Replying to casella: > @ceraolo, I tried with the latest …
- 18:04 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- Replying to casella: > @ceraolo, if some of your students …
- 17:54 Ticket #6201 (Run-time - Acos in implicit function, failing to solve non-linear system) updated by
- Replying to phannebohm: > I still don't get why we can't …
- 16:47 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- @ceraolo, if some of your students spot issues, you can put their …
- 16:45 Ticket #6242 (Code Generation - Modelica External C dependencies are not found on Windows) updated by
-
Cc changed
@adrpo, @mahge930, incidentally "Exited code -1073741515" makes … - 16:45 Ticket #6201 (Run-time - Acos in implicit function, failing to solve non-linear system) updated by
- Replying to phannebohm: >In a NLS or equation that can't …
- 16:41 Ticket #6201 (Run-time - Acos in implicit function, failing to solve non-linear system) updated by
- Replying to casella: > Replying to [comment:4 …
- 16:38 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- I will tomorrow
- 16:34 Ticket #6241 (Code Generation - Generated Cpp code for Modelica functions using uninitialized varaibles) updated by
- Wow, this kind of low-level bugs looks scary to me, good that you …
- 16:24 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- Replying to AnHeuermann: > Open problems: > - …
- 16:15 Ticket #6242 (Code Generation - Modelica External C dependencies are not found on Windows) created by
- For a Modelica External C model that is connected to a Windows C- dll, …
- 16:14 Ticket #6241 (Code Generation - Generated Cpp code for Modelica functions using uninitialized varaibles) updated by
- https://github.com/OpenModelica/OpenModelica/pull/6978
- 16:12 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- Replying to sjoelund.se: > Perhaps have a special kind of …
- 16:01 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- @ceraolo, I tried with the latest nightly build …
- 15:59 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
-
Cc changed
@Karim, @AnHeuermann, see comment:6. I guess this should be an easy … - 15:50 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
-
Cc changed
Replying to casella: > Sure. This only makes sense if … - 15:22 Ticket #6241 (Code Generation - Generated Cpp code for Modelica functions using uninitialized varaibles) updated by
- The relevant template for this code generation is in …
- 15:06 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- Open problems: - …
- 15:05 Ticket #6241 (Code Generation - Generated Cpp code for Modelica functions using uninitialized varaibles) created by
- Running […] will generate …
- 15:01 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- Replying to sjoelund.se: > You need to be careful if you …
- 14:44 Ticket #6240 (Backend - Extend overconstrained connector semantics to handle dynamic branches) created by
- This is a second, improved attempt to address this issue, following …
- 14:17 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- So I debugged a bit more together with @niklwors and we concluded that …
- 13:19 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- We did this with 1.17.0-dev-141
- 12:58 Ticket #6239 (OMEdit - Invalid error message from OM) updated by
- I can't reproduce this with a bit older OMEdit, I will compile a new one.
- 09:11 Ticket #6239 (OMEdit - Invalid error message from OM) created by
- Steps to reproduce: - load omEdit - load Test.mo - Change Amplitude of …
2020-11-23:
- 20:41 Ticket #5783 (Backend - OME fails to translate a model due to assigning min, max and nominal ...) updated by
- BUMP - any news on this? This prevents us from dissemninating the …
- 15:05 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- You need to be careful if you symbolically introduce Cramer's rule …
- 14:17 Ticket #6234 (OMEdit - OMEdit crashes when try to save a model after modifications) closed by
- fixed: Fixed in 0b558b5/OpenModelica.
- 12:15 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) closed by
- invalid
- 12:15 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) updated by
- Replying to adrpo: > The thing you need to break are …
- 11:32 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) updated by
-
Description changed
- 11:31 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) updated by
- Replying to dietmarw: > @casella, Just a small comment on …
- 10:08 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- Replying to casella: > As to Gaussian elimination, I'm …
- 09:46 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- Replying to casella: > Hmm, not really. The final …
- 09:35 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) updated by
-
The thing you need to break are
connectstatements. This means … - 08:15 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
- Replying to casella: > I respectfully disagree. I think we shouldn't …
- 07:48 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) updated by
- @casella, Just a small comment on clarification. Whenever you talk …
- 00:40 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
- Replying to anonymous: > Well #6224 is a separate issue. …
- 00:32 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- As to Gaussian elimination, I'm really unsure it makes sense to …
- 00:28 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- Replying to phannebohm: > You're absolutely right. Your …
- 00:18 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- Yeah, that's one option. Maybe we should explore if we can figure out …
2020-11-22:
- 23:55 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) updated by
-
Description changed
- 23:44 Ticket #6238 (Backend - Extend overconstrained connector semantics to handle dynamic branches) created by
- The overconstrained connector semantics defined in Section …
- 23:09 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
- Well #6224 is a separate issue. Systems with no time dependence …
- 21:37 Ticket #6237 (Backend - Wrong behaviour with conditional equation driven by boolean variable) created by
-
Simulate the model
System1in the attached package. Despite … - 14:27 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- You're absolutely right. Your remark about the assert made me realize …
- 13:47 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
- Yes I totally agree with casella: I think we should really avoid …
- 13:38 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Could you please redo your tests with the recently uploaded version …
- 11:44 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to casella: > In any case, as far as I understand, either you …
- 09:26 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to casella: >>I'm not exactly sure how that works, since …
- 08:50 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- You can prevent division by parameters with …
2020-11-21:
- 20:15 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to phannebohm: > Replying to [comment:24 …
- 20:13 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- Cramer's rule always works, if the system is not singular, but in …
- 19:50 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to jean-philippe.tavella@…: > About the …
- 19:48 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
-
Cc changed
One more end user (in the power engineering field BTW) got confused by … - 17:35 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to phannebohm: > ... and obviously it doesn't …
- 17:28 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to jean-philippe.tavella@…: > @phannebohm: > I …
- 13:17 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
- We actually talked about this some time ago. In principle the ASSC …
- 13:12 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- @phannebohm: I agree the labeling on the y-axis is too imprecise. …
- 12:46 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to jean-philippe.tavella@…: > Second, about the …
- 09:00 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Answering to @casella About the unbalanced connectors, I will think …
2020-11-20:
- 23:19 Ticket #6234 (OMEdit - OMEdit crashes when try to save a model after modifications) updated by
- @adeas31 reports that …
- 23:16 Ticket #6172 (Code Generation - Issue with for loop index variables in conditional expression within ...) updated by
- Any further discoveries on this issue?
- 23:09 Ticket #5868 (Backend - Avoid alias elimination of individual elements of an array) updated by
- @Karim, do you think this could be actually fixed in 1.17.0? This …
- 23:07 Ticket #6234 (OMEdit - OMEdit crashes when try to save a model after modifications) updated by
-
Cc changed
Some more details. I have the same problem with the Windows nightly … - 22:39 Ticket #6234 (OMEdit - OMEdit crashes when try to save a model after modifications) updated by
-
Cc, Status changed
I confirm that. Top priority fix! - 19:02 Ticket #6170 (OMEdit - Reintroducing documentation "link" in class context menu) updated by
- I'm also in favour of comment:2 option, and I also miss the old …
- 18:56 Ticket #6235 (Frontend - Recent regression with NF) updated by
- I improved the error in …
- 18:34 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) updated by
-
Cc changed
- 18:33 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Replying to jean-philippe.tavella@…: > About the …
- 18:23 Ticket #6233 (OMEdit - Tooltip shows wrong unit) updated by
-
Milestone changed
- 18:22 Ticket #6236 (Backend - Solve simple linear systems in closed form if that leads to simple solution) created by
- Consider the following linear system, which is obtained when building …
- 18:14 Ticket #6235 (Frontend - Recent regression with NF) updated by
- One of my students when created model Netstart in DCDrive_pkg (I'm …
- 17:45 Ticket #6235 (Frontend - Recent regression with NF) updated by
- I guess you found the issue yourself, but now I'm curious what caused it :)
- 17:40 Ticket #6235 (Frontend - Recent regression with NF) closed by
- invalid
- 17:36 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- @casella Thank you so much for the very accurate and interesting …
- 17:33 Ticket #6235 (Frontend - Recent regression with NF) created by
- The attached Netstart mdel simulated in 1.16-dev648 with both OF and …
- 13:46 Ticket #6234 (OMEdit - OMEdit crashes when try to save a model after modifications) created by
- Starting from today (last nightly build) OMEdit crashes when you try …
- 13:37 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- Btw. when removing the wrong line […] everything works just fine …
- 13:21 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- My test script […]
- 13:20 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
-
Cc changed
Apparently there is a wrongly generated C++ function […] in … - 10:58 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) reopened by
- 10:52 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) closed by
- fixed: When running …
- 10:12 Ticket #6225 (OMSimulator - OMSimulator hangs in the HUBCAP sandbox) updated by
- To be more precise: OMEdit already hangs as soon as the step to …
- 10:01 Ticket #6170 (OMEdit - Reintroducing documentation "link" in class context menu) updated by
- I'm for the comment:2 option. The additional browser window would just …
- 09:59 Ticket #6233 (OMEdit - Tooltip shows wrong unit) updated by
- For a parametric plot it however makes sense to show - horizontal …
- 09:49 Ticket #6233 (OMEdit - Tooltip shows wrong unit) created by
- Consider the following example of an electric circuit using a ramp …
- 09:48 Ticket #6170 (OMEdit - Reintroducing documentation "link" in class context menu) updated by
-
Cc changed
I don't have any strong preference there. Its more about OMEdit users. … - 00:46 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Regarding the models failing at runtime, there nonlinear systems of …
- 00:43 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) created by
- Please check …
- 00:29 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
-
Regarding the examples failing to compile because of
Clock(), … - 00:00 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- As far as I understand, these connector definitions are not legal …
2020-11-19:
- 19:16 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- OK, so we have 30 models failing out of 50. - 9 models fail because …
- 16:50 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- https://libraries.openmodelica.org/branches/newInst/PowerSysPro/PowerSy …
- 08:19 Ticket #6231 (New Instantiation - NF with positiveMax in connections of arrays of port) updated by
- Thanks a lot Per for very quickly fix
- 08:18 Ticket #6231 (New Instantiation - NF with positiveMax in connections of arrays of port) closed by
- fixed
2020-11-18:
- 22:01 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- I'm not sure what is happening, but after three days there are still …
- 21:20 Ticket #6224 (Initialization - OM cannot run some electrical load flow calculations from open-source ...) updated by
- Some other observations: * PowerSysPro.Components.myPVNode: Please …
- 12:28 Ticket #6231 (New Instantiation - NF with positiveMax in connections of arrays of port) updated by
-
Cc changed
- 12:27 Ticket #6231 (New Instantiation - NF with positiveMax in connections of arrays of port) created by
-
Please consider the attached MWE. When trying to run model
M, … - 00:58 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- Replying to AnHeuermann: > I think 1.16.1 doesn't contain …
2020-11-17:
- 19:00 Milestone 1.16.1 completed
- Bugfix release for 1.16.0, fixing regressions and some critical issue.
- 15:56 Ticket #6230 (OMEdit - Wrong path for documentation of simulation flags) closed by
- duplicate: Duplicate of: #6168 Should be fixed in version 1.16.1.
- 15:27 Ticket #6230 (OMEdit - Wrong path for documentation of simulation flags) created by
- In OMEdit, simulation setup -> simulation flags -> When clicking the …
- 12:03 Ticket #6220 (Run-time - Small array optimizations: stack allocation) updated by
- Replying to AnHeuermann: > I'm not sure if I understand it …
- 11:56 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- Really no porting of this to the maintenance branch.
- 11:56 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
-
Milestone changed
- 10:02 Ticket #6220 (Run-time - Small array optimizations: stack allocation) updated by
- I'm not sure if I understand it correctly, but you plan to use a macro …
- 09:49 Ticket #6228 (Cpp Run-time - Updated SUNDIALS KINSOL failing on Cpp runtime) updated by
- I think 1.16.1 doesn't contain any SUNDIALS changes, so this should …
Note:
See TracTimeline
for information about the timeline view.
