Timeline
2021-01-05:
- 16:31 Ticket #6328 (Backend - Support the homotopy() operator for the generation of symbolic ...) created by
-
Please run the MWE
Test1in the attached package with the … - 15:37 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Replying to casella: > Replying to ceraolo: …
- 10:42 Ticket #6326 (OMEdit - OMEdit changes to dark mode if Fedora changes to dark mode) updated by
- Guessing its because we don't force any style and use the system …
- 02:16 Ticket #6326 (OMEdit - OMEdit changes to dark mode if Fedora changes to dark mode) updated by
-
Cc, Milestone changed
- 02:03 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
-
Cc, Component changed
I am currently working on test cases using the PowerGrids library. It …
2021-01-04:
- 23:53 Ticket #6327 (OMEdit - OMEdit crashes when unloading a library) created by
- I am developing a test library, that I need to unload and reload …
- 22:52 Ticket #6326 (OMEdit - OMEdit changes to dark mode if Fedora changes to dark mode) created by
- When I change the Gnome theme in Fedora to dark theme, OMEdit becomes …
- 15:05 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) reopened by
- I am currently working on large power grid models for my presentation …
- 14:49 Ticket #6325 (New Instantiation - Support for ExternData) updated by
-
Status, Owner, Component, Milestone changed
@dietrmarw, I guess this is because of #5240. Apparently, your data … - 12:48 Ticket #6325 (New Instantiation - Support for ExternData) created by
- When trying to test/verify an example from …
- 01:43 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- The weird thing it that I don't see this issue, but I guess it's the …
2021-01-03:
- 22:40 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- Thank you! The suggested workaround worked for me. I had already tried …
- 21:00 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to stephan.fevrier: > With some Email support …
- 19:45 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- With some Email support from martin sjoelund I could resolve the issue …
- 15:39 Ticket #6324 (NF API - Issue with NF API) created by
-
While working with the
PowerGridslibrary in OMEdit, at some … - 11:52 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Replying to ceraolo: > The system during the simulation …
- 11:40 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
- Replying to ceraolo: > Well, maybe it was not a good idea …
- 11:31 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
-
Priority, Status, Component, Owner, Milestone changed
- 11:31 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- This could be an issue with recent changes to the NF API. Please go to …
- 11:25 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- @xiang.wang, if you are facing other such weird problems, please try …
- 10:02 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- sorry, your models are not identical. In ScTT you changed the …
- 04:17 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
-
Description changed
- 04:13 Ticket #6323 (*unknown* - Adding sensors changes results) created by
- The Test1.mo needs PowerGrids to run. It contains models ScTT and …
- 03:58 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) closed by
- wontfix: Well, maybe it was not a good idea to combine different issues in the …
- 03:43 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- On windows 64-bit, I should add.
- 03:42 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) created by
- In my new installation of 1.16.2, it seems like the …
- 01:29 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to casella: > > Please check Tools | Options | …
- 00:56 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to casella: > Replying to [comment:10 …
2021-01-02:
- 19:36 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to Bruno PERMANNE <bruno.permanne@…>: > As you …
- 19:25 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- I think there is no problem with de pathnames. I have attached two …
- 19:17 Ticket #6321 (OMEdit - Add the Reload feature in OMEdit) created by
- When working with OpenModelica and other tools (including a text …
- 18:52 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to Bruno PERMANNE <bruno.permanne@…>: > Hello, > …
- 18:36 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
- @ceraolo, I suspect that the two examples converge to different …
- 17:59 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Hello, As an old programmer, I never use pathname with non-ASCII …
- 17:51 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
-
Fixed
Test.moto actually use the embeddedSupportpackage. - 17:31 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
-
Cc changed
Replying to xiang.wang@…: > for 1.16.0-64bit the same … - 16:17 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
-
Description changed
- 10:46 Ticket #6320 (*unknown* - Wrong result in a realistic, PowerGrids-based example) closed by
- invalid
- 10:45 Ticket #6320 (*unknown* - Wrong result in a realistic, PowerGrids-based example) created by
- The attached OM.png and Dymola.png show variable IPu as obtained using …
- 10:44 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) created by
- The attached OM.png and Dymola.png show variable IPu as obtained using …
- 02:14 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to casella: > I tried to reproduce the issue on …
2021-01-01:
- 10:28 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- "Maybe you have some other setting that is interfering badly with …
2020-12-31:
- 17:33 Ticket #4848 (OMEdit - Linear equations are not detailed in the debugger) updated by
-
Description, Milestone changed
- 16:47 Ticket #6318 (*unknown* - Adding automatic diagram size option) updated by
- I can try but with zero or very little hopes to have some success. I …
- 15:24 Ticket #6318 (*unknown* - Adding automatic diagram size option) updated by
- @ceraolo, would you mind opening a similar ticket on the …
- 15:22 Ticket #6317 (OMEdit - Autocompletion breaks after annotation(Dialog(tab = "Anything"))) updated by
-
Milestone changed
- 15:22 Ticket #6317 (OMEdit - Autocompletion breaks after annotation(Dialog(tab = "Anything"))) updated by
-
Cc changed
@atrosinenko, would you like to have a look? Thanks! - 15:15 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
-
Cc changed
See also #6313 - 15:15 Ticket #6313 (OMEdit - port_a is gone for all fluid components) closed by
- duplicate: @xiang.wang, thank you for your report. This is a duplicate of #6307, …
- 09:13 Ticket #6318 (*unknown* - Adding automatic diagram size option) updated by
-
Description changed
- 09:11 Ticket #6318 (*unknown* - Adding automatic diagram size option) updated by
-
Priority, Type, Milestone changed
- 09:10 Ticket #6318 (*unknown* - Adding automatic diagram size option) updated by
-
Description changed
- 09:06 Ticket #6318 (*unknown* - Adding automatic diagram size option) created by
- After many years of Modelica usage, the more I use it, the more I …
- 01:14 Ticket #6317 (OMEdit - Autocompletion breaks after annotation(Dialog(tab = "Anything"))) created by
- The autocompletion does not work after using the following annotation: …
2020-12-30:
- 17:57 Ticket #6316 (OMEdit - The frontend used to obtain flat models in OMEdit is not set correctly) created by
- After the NF was made the default, setting Tools | Options | …
- 17:42 Ticket #6303 (New Instantiation - Issue with records in Chemical library) updated by
-
Cc changed
Here are some more clues I got on Windows with the latest nightly … - 13:21 Ticket #6314 (New Instantiation - NF issue with redeclare in Physiolibrary) updated by
- In Dymola works fine. May be there is some problem with redeclaration …
- 12:46 Ticket #6315 (Backend - Issue with initial equation generation in Physiolibrary) created by
- Please check …
- 12:42 Ticket #6314 (New Instantiation - NF issue with redeclare in Physiolibrary) updated by
-
Cc changed
- 12:41 Ticket #6314 (New Instantiation - NF issue with redeclare in Physiolibrary) created by
- Please check …
- 12:01 Ticket #6303 (New Instantiation - Issue with records in Chemical library) updated by
-
Priority changed
- 12:01 Ticket #6304 (New Instantiation - Issue with the NF in Chemical library) updated by
-
Priority changed
- 11:58 Ticket #6313 (OMEdit - port_a is gone for all fluid components) updated by
- When I attach a snapshot it is reject for spam reason, so I can't …
- 11:52 Ticket #6313 (OMEdit - port_a is gone for all fluid components) created by
- when I have installed 1.16.2 today I found that the diagram view of …
2020-12-29:
- 12:17 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
-
Cc changed
I tried to reproduce the issue on Windows 10, using the1.16.2…
Note:
See TracTimeline
for information about the timeline view.
