Timeline
2020-06-17:
- 22:52 Ticket #5619 (Initialization - Homotopy-based initialization does not use updated parameter values ...) updated by
- I changed something for homotopy resimulate in #6001, this could …
- 22:49 Ticket #5836 (New Instantiation - The NF accepts illegal discrete variables) updated by
- Replying to casella: > Any conclusion on this ticket. …
- 22:39 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
- No, this one was FMI specific. #4608 seems to fail much earlier in the …
- 22:38 Ticket #6018 (*unknown* - Achieve successful simulation of 100% MSL 4.0.0 models) updated by
-
Status, Owner changed
- 22:37 Ticket #6018 (*unknown* - Achieve successful simulation of 100% MSL 4.0.0 models) created by
- MSL 4.0.0 is going to be released soon. Jenkins …
- 22:30 Ticket #2926 (Frontend - Check uses-annotation on loadFile) updated by
- @sjoelund.se, can we fix this alongside the package manager?
- 22:29 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
- Is this related to #4608, perhaps?
- 22:27 Ticket #5619 (Initialization - Homotopy-based initialization does not use updated parameter values ...) updated by
- @AnHeuermann, can we fix this for 1.16.0?
- 22:25 Ticket #5836 (New Instantiation - The NF accepts illegal discrete variables) updated by
- Any conclusion on this ticket. @Karim, @Andreas, based on your recent …
- 22:23 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
- Thanks!
- 21:05 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
- See [https://github.com/OpenModelica/OpenModelica/pull/975 …
- 20:46 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
-
Status changed
I will take care of the issue. There are two problems (in … - 20:29 Ticket #6003 (Backend - Code generation bug) updated by
- Agreed. I'd focus on …
- 20:27 Ticket #6017 (FMI - FMUs don't export libopenblas.so) updated by
-
Milestone changed
It wouldn't be bad if we could fix it in 1.16.0 already - 20:25 Ticket #6016 (OMPython - Unable to access Open Modelica from Scilab) updated by
-
Milestone changed
- 20:23 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
-
Priority changed
@lochel, what do you think of this? - 18:13 Ticket #6003 (Backend - Code generation bug) updated by
- Replying to casella: > @Karim, do we have some warnings …
- 15:35 Ticket #6017 (FMI - FMUs don't export libopenblas.so) updated by
-
Cc changed
@sjoelund What am I doing wrong here? We are testing this on every … - 15:15 Ticket #6017 (FMI - FMUs don't export libopenblas.so) updated by
- Also not working are - 2.0 cs static - 2.0 me dynamic - 2.0 …
- 14:57 Ticket #6017 (FMI - FMUs don't export libopenblas.so) updated by
-
Description changed
Same problem for fmuChecker: […] - 14:51 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- I'll creating tickets for all problems I'm finding while doing the …
- 14:50 Ticket #6017 (FMI - FMUs don't export libopenblas.so) created by
- I'm building a static C FMU 2.0 for ModelExchange with OpenModelica …
- 11:55 Ticket #6016 (OMPython - Unable to access Open Modelica from Scilab) created by
- I am using 'OpenModelica v1.16.0-dev-371-geb234c072 (64-bit)', 'Python …
- 11:50 Ticket #6014 (Interactive Environment - OMPython: Set structural parameter at initialization) updated by
- Is it possible to set a string via […] modifications? This one …
- 11:12 Ticket #6002 (FMI - Undefined variable units when using FMUs) updated by
- Thanks for the lightening fast reply, casella! I was using OMC 1.14 …
- 10:29 Ticket #6015 (OMScilab - Development of an OMScilab interface) updated by
-
Description changed
- 10:28 Ticket #6015 (OMScilab - Development of an OMScilab interface) updated by
- I understand the code development will have to be hosted as a separate …
- 10:23 Ticket #6015 (OMScilab - Development of an OMScilab interface) created by
- OpenModelica features the …
- 10:21 Ticket #5986 (OMEdit - Can't open wsl path from OMEdit under Windows) updated by
-
Milestone changed
I looked a bit into this and it seems like this is not possible to … - 09:32 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- Not really. We can add a for to …
- 07:47 Ticket #5824 (Run-time - Import start values from existing simulations run with other tools) updated by
- Check the forum about this topic
- 07:13 Ticket #6014 (Interactive Environment - OMPython: Set structural parameter at initialization) updated by
- Thank you for the fast reply. It works well with the solution …
2020-06-16:
- 17:59 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- When this is finished, do we need to do something specific on the FMU …
- 17:54 Ticket #6003 (Backend - Code generation bug) updated by
-
Component, Milestone changed
- 17:54 Ticket #6003 (Backend - Code generation bug) updated by
- @Karim, do we have some warnings about missing initial equation for …
- 17:50 Ticket #6001 (Run-time - Issues with resimulate) updated by
- Great, thanks! I see that the PR was merged and @adeas31 confirmed it …
- 16:21 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- My Jenkins script is running now and validating the FMUs. […] …
- 13:27 Ticket #6001 (Run-time - Issues with resimulate) closed by
- fixed: It works, we will push it soon! I don't think anything else has to be …
- 12:34 Ticket #6003 (Backend - Code generation bug) updated by
- Replying to p.van.der.hulst@…: > Hi, > > Thanks for the …
- 12:14 Ticket #6003 (Backend - Code generation bug) updated by
- Hi, Thanks for the suggestions. Since the model compiles now, I can …
- 11:41 Ticket #6003 (Backend - Code generation bug) updated by
-
The basic problem is that
MpxIndex.yhas no initial value and needs … - 11:18 Ticket #6001 (Run-time - Issues with resimulate) updated by
- I found a fix. It is a classic de-synchronization problem between the …
- 10:22 Ticket #6001 (Run-time - Issues with resimulate) updated by
- Replying to casella: > This second definition I think …
- 10:21 Ticket #6014 (Interactive Environment - OMPython: Set structural parameter at initialization) updated by
- Replying to adrpo: > You can already do it via …
- 10:15 Ticket #2174 (Frontend - Allow for modifiers in translateModel() and simulate() API functions) updated by
- See discussion in #6014
- 09:51 Ticket #6014 (Interactive Environment - OMPython: Set structural parameter at initialization) updated by
- You can already do it via setParameterValue or …
- 09:22 Ticket #6014 (Interactive Environment - OMPython: Set structural parameter at initialization) updated by
-
Status, Owner, Component, Milestone changed
This is related to #2174. Maybe it's time we finally provide this … - 08:17 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- > Do we have Darwin 32bit and Windows 32bit available? There is no …
- 08:07 Ticket #6014 (Interactive Environment - OMPython: Set structural parameter at initialization) created by
- Hello, there a view parameters that can't be set after compilation. …
- 07:35 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- All of this is independent of the OpenModelica/OpenModelica github …
- 07:33 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
-
Cc, Status, Owner changed
I created a new Jenkins file that runs a new Docker image with …
2020-06-15:
- 15:20 Ticket #6012 (OMEdit - Handle default choices for redeclare as default choices for parameters) updated by
-
Status, Owner changed
This should have worked. I'll have a look. - 15:18 Ticket #6013 (Interactive Environment - choicesAllMatching doesn't work with relative paths) updated by
-
Component changed
- 15:17 Ticket #6013 (Interactive Environment - choicesAllMatching doesn't work with relative paths) updated by
- This seems to be an issue in the OMC replaceable API, nothing to do …
- 15:16 Ticket #6013 (Interactive Environment - choicesAllMatching doesn't work with relative paths) updated by
-
Status, Owner changed
- 15:16 Ticket #6011 (OMEdit - OMEdit does not correctly add redeclare statements) updated by
-
Status, Owner changed
I need to check this first, then I'll pass it to @adeas31 if needed. - 15:10 Ticket #6011 (OMEdit - OMEdit does not correctly add redeclare statements) updated by
-
Status, Component changed
- 15:09 Ticket #6013 (Interactive Environment - choicesAllMatching doesn't work with relative paths) created by
- Steps to reproduce the issue: - enable replaceable support in OMEdit - …
- 15:07 Ticket #6012 (OMEdit - Handle default choices for redeclare as default choices for parameters) created by
- Steps to reproduce the issue: - activate replaceable support - open …
- 14:58 Ticket #6011 (OMEdit - OMEdit does not correctly add redeclare statements) created by
- Please consider the attached test package: - activate replaceable …
- 14:54 Ticket #5999 (Scripts - icon generator does not work with classnames ending on numeral) updated by
-
Owner changed
Feedback from @dietmarw. Next problem with the documentation … - 14:40 Ticket #6007 (OMEdit - Improve replaceable class input widget) updated by
- @adeas31, I checked again and indeed you can resize the parameter …
- 14:14 Ticket #6001 (Run-time - Issues with resimulate) updated by
-
Owner changed
- 14:13 Ticket #6001 (Run-time - Issues with resimulate) updated by
-
As far as I know, the meaning of
finalis spelled out in two … - 13:54 Ticket #6003 (Backend - Code generation bug) updated by
-
Status, Owner changed
Running the code through the transformational debugger says this … - 12:46 Ticket #6008 (OMEdit - OMEdir debugger support for quoted identifiers) updated by
- Can you please add a small test model as well.
- 12:28 Ticket #6009 (OMEdit - Docker cross-compile FMUs dialog in OMEdit) updated by
-
Priority, Milestone changed
I guess we can make this a blocker for the next release, but we don't … - 12:28 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
-
Cc, Keywords changed
Fmi-Cross-Check repository: https://github.com/modelica/fmi-cross-check - 12:27 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- This is the corresponding GitHub issue for OMSimulator: …
- 12:26 Ticket #6009 (OMEdit - Docker cross-compile FMUs dialog in OMEdit) updated by
-
Milestone changed
And of course we should add this to the users guide - 12:25 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) reopened by
- Sorry, I thought you were refering to the Docker FMU stuff. So …
- 12:25 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) updated by
- Doesn't seem to be the same issue though.
- 12:24 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) closed by
- duplicate: Duplicate of #6009 :)
- 12:22 Ticket #6010 (FMI - Get OpenModelica back into FMI Cross-checker) created by
- We should get back into the FMI Cross-checker logs. We can use this …
- 12:13 Ticket #6009 (OMEdit - Docker cross-compile FMUs dialog in OMEdit) created by
- Users can cross compile FMUs very easily if they have Docker …
- 12:09 Ticket #6008 (OMEdit - OMEdir debugger support for quoted identifiers) created by
- The quoting of identifiers changed again: …
- 11:41 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) closed by
- fixed: Ok, so we can close this ticket, and I may take care of the …
- 10:56 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
- That XML is wrong. You are missing some </message> from either …
- 10:31 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
-
Without
-logFormat=xmltcpboth cases work. But for tcp I assume that … - 09:36 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
- Replying to AnHeuermann: > @sjoelund What exactly is the …
- 09:31 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
- @sjoelund What exactly is the problem here? Is it not possible to do …
- 09:20 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) updated by
-
I tested without
logFormat, with-logFormat=xmland … - 08:52 Ticket #6001 (Run-time - Issues with resimulate) updated by
-
The problem is that the variable
tank1.leveloriginally would be … - 08:00 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- Replying to casella: > @Karim, have you made up your mind …
2020-06-14:
- 23:18 Ticket #5347 (Third-Party Libraries - Issues with MSL library handling in Linux) updated by
-
Milestone changed
This problem should be hopefully solved in 1.17.0 by the new package … - 23:17 Ticket #5488 (Testing Framework - Complete coverage test of MSL 3.2.3 OMEdit NF API calls) updated by
-
Milestone changed
Moved to 1.17.0 - 23:16 Ticket #5950 (Build Environment - omc crashes during bootstrapping on fresh Debian Buster) updated by
- @rfranke, was this issue resolved?
- 23:04 Tickets #2538,5694,5724,5731,5824,5862,5868 batch updated by
-
Milestone changed
1.16.0 feature freeze is imminent, new developments postponed to 1.17.0 - 23:01 Ticket #5720 (Installation program - Do not allow to install on directories where the user does not have ...) updated by
- @adeas31, can we sort this out for 1.16.0?
- 23:00 Milestone 1.15.0 completed
- This release was originally planned to add graphical support of …
- 22:58 Ticket #5952 (Backend - Scaling of matching and sorting for simulation badly deteriorated from ...) updated by
- @Karim, have you made up your mind on how to deal with this issue for …
- 22:54 Ticket #5842 (Installation program - When installing OpenModelica under Ubuntu, MSL 3.2.2 is installed) closed by
- fixed: Since 1.14.2 and 1.15.0 will not be released, this will automatically …
- 22:52 Ticket #5662 (NF API - nfAPI does not locate a submodel) updated by
-
Milestone changed
@adrpo, any chance to fix this for 1.16.0? - 22:51 Ticket #5741 (Backend - Disabling tearing breaks code generation in power system model) closed by
- fixed: The documentation was updated in …
- 22:50 Ticket #5764 (*unknown* - OPC UA seems to miss DataType at the nodes attributes) updated by
-
Status, Owner, Milestone changed
@sjoelund.se, any chance to fix this for 1.16.0? - 22:49 Ticket #5864 (Installation program - Bug during compilation, just after the installation) closed by
- wontfix: No more feedback provided on this ticket, so I'm closing it now. Feel …
- 22:47 Ticket #5892 (Build Environment - solartherm library example) updated by
-
Milestone changed
- 22:45 Tickets #2079,2081,2132,2661,2926,3424,3535,4372,4608,4781,5276,5328,5347,5367,5397,5487,5488,5574,5575,5590,5607,5609,5615,5619,5620,5621,5629,5631,5639,5649,5650,5668,5669,5709,5737,5743,5796,5821,5828,5871,5948,5950,5952,5677,5682,5714,5726,5841,5846,3689,5671,5674,5707,5717,5751,5757,5760,5777,5803,5816 batch updated by
-
Milestone changed
Release 1.15.0 was scrapped, because replaceable support eventually … - 22:39 Ticket #6007 (OMEdit - Improve replaceable class input widget) created by
- The replaceable class input widget should be improved. Please open …
- 22:36 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
- For the record, the feature is currently optional and disabled by …
- 22:21 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) closed by
- fixed
- 22:20 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
- Release 1.15.0 was eventually [ …
- 14:01 Ticket #6006 (*unknown* - Migrate this Trac to Github) updated by
- Sounds good. We already did it with the MSL and it worked well. We …
- 10:34 Ticket #6005 (Run-time - Test non-default install directories) closed by
- duplicate: No, I'll close this one than.
2020-06-13:
- 20:32 Ticket #6006 (*unknown* - Migrate this Trac to Github) created by
- We should migrate the Trac to github. That is issues, milestones, …
- 20:29 Ticket #6005 (Run-time - Test non-default install directories) updated by
- Indeed. Anything extra in the present ticket that was not mentioned in …
- 20:26 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
- Replying to adrpo: > We can actually simulate an empty …
- 07:44 Ticket #6005 (Run-time - Test non-default install directories) updated by
- Related to #5811.
2020-06-12:
- 21:33 Ticket #6005 (Run-time - Test non-default install directories) updated by
- We would need to check for every place a file is generated or read and …
- 21:31 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
- We can actually simulate an empty model. Is it the default sanity test …
- 20:49 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
- Are you sure we can simulate a totally empty model without running …
- 20:46 Ticket #6005 (Run-time - Test non-default install directories) updated by
- Sounds good to me :)
- 17:59 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
-
Cc changed
- 17:59 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
- First Problem is fixed in …
- 13:56 Ticket #5985 (OMEdit - Code foldings for ssp source code) updated by
-
Milestone changed
- 13:56 Ticket #5984 (OMEdit - OMSimulator text editing enhancements) closed by
- fixed: Fixed in 1a78531/OpenModelica. > Tabs should be preserved …
- 13:54 Ticket #5789 (OMEdit - OMEdit can't delete ssp components) closed by
- fixed: Fixed in 1a78531/OpenModelica.
- 13:53 Ticket #5976 (OMEdit - Impossible to set parameters with units different from displayUnit ...) closed by
- fixed: Fixed in 737ef3b/OpenModelica.
- 13:46 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
-
I'm resetting
eventInfonow only atfmi2EnterEventMode. In … - 13:27 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
- A bit more digging into log files shows what FMUCheck is doing: …
- 12:20 Ticket #6001 (Run-time - Issues with resimulate) updated by
-
Cc, Status, Component, Owner changed
This is indeed a regression. I tested … - 11:40 Ticket #6005 (Run-time - Test non-default install directories) created by
- Every now and then we have problems with installation paths containign …
- 11:25 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
-
Owner changed
First problem should be fixed in … - 10:26 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) updated by
-
Status, Owner changed
The first error case is prabaly only missing some quotes in the … - 10:23 Ticket #6004 (Cpp Run-time - Cpp runtime on Windows can't handle spaces in install path) created by
- The C++ runtime can't handle the default installation location …
- 09:42 Ticket #4829 (Installation program - Windows installers fail SmartScreen checks) updated by
- Having this for version 1.16.0 would be great. In my opinion …
2020-06-11:
- 21:33 Ticket #5999 (Scripts - icon generator does not work with classnames ending on numeral) updated by
- The change is now in, please check if this works for you.
- 17:08 Ticket #5999 (Scripts - icon generator does not work with classnames ending on numeral) updated by
- Should be fixed by PR: …
- 13:56 Ticket #5766 (Run-time - Number of homotopy steps out of control) updated by
- Is this ticket still unsolved? …
- 13:50 Ticket #5973 (FMI - Make it possible to enable custom set of runtime flags in FMUs) closed by
- fixed: Added with …
- 13:45 Ticket #5621 (FMI - Issue with FMI import) updated by
- We should have a closer look at that wrapper code. I can't do that …
- 13:20 Ticket #6003 (Backend - Code generation bug) created by
- Hi, For a project at my new job I decided to move to openmodelica. My …
- 12:53 Ticket #4273 (FMI - FMU for co-simulation , Available Solvers) closed by
- fixed: Added CVODE to FMU CS export with …
- 11:14 Ticket #5367 (FMI - Generated FMU missing events in other tools) updated by
-
Cc changed
The problem is still there but only for ModelExchange. For …
2020-06-10:
- 23:59 Ticket #5621 (FMI - Issue with FMI import) updated by
- The Modelica wrapper code that we generate to wrap the FMUs has reinit …
- 23:56 Ticket #5621 (FMI - Issue with FMI import) updated by
- OK, so I guess we need to do something about it :)
- 17:20 Ticket #5621 (FMI - Issue with FMI import) updated by
- > @ceraolo, are other FMU import examples without reinit working for …
Note:
See TracTimeline
for information about the timeline view.
