Timeline
2017-10-16:
- 18:47 Ticket #4572 (OMEdit - OMEdit allows illegal instance names through GUI) updated by
- This issue applies to […] It is a typical error of students to …
- 17:14 Ticket #4572 (OMEdit - OMEdit allows illegal instance names through GUI) created by
- There are two issues on illegal names in OMEdit: 1) Drag new …
- 16:48 Ticket #4570 (*unknown* - State-machines translation error) updated by
- I confirm, the simulation works properly. The only unexpected …
- 16:33 Ticket #4570 (*unknown* - State-machines translation error) updated by
- Yes, checks for state machines are not (yet) supported. I should look …
- 16:20 Ticket #4570 (*unknown* - State-machines translation error) updated by
- Thanks for quick reply, I put the flag +std=3.3 in the OMEdit …
- 15:05 Ticket #4570 (*unknown* - State-machines translation error) updated by
- Yes, try to give OMC the flag "+std=3.3" to enforce Modelica 3.3. …
- 14:36 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) updated by
- Try 3d0d8a/OMEdit. I think this is what you want.
- 14:10 Ticket #4571 (MetaModelica - MetaModelica function pointer with underscore generates invalid code) created by
- A MetaModelica function pointer that has an underscore in its name …
- 13:21 Ticket #4570 (*unknown* - State-machines translation error) created by
- Please consider the following state-machines basic-model: […] …
- 12:56 Ticket #4461 (OMEdit - OMEdit does not save additional simulation flags) closed by
- fixed: Fixed in 16bcbe/OMEdit.
- 12:55 Ticket #4567 (OMEdit - Simulation Toolbar appears twice) closed by
- fixed: Fixed in bc8938/OMEdit.
- 12:41 Ticket #4138 (New Instantiation - New FrontEnd) updated by
-
Description changed
- 12:31 Ticket #3786 (FMI - FMU export generates an empty ModelStructure) updated by
-
Milestone changed
- 12:31 Ticket #2764 (FMI - ModelStructure with wrong dependencies for states and without ...) closed by
- fixed: Fixed in …
- 12:30 Ticket #4424 (FMI - Wrong ModelStructure in FMI 2 modelDescription.xml) closed by
- fixed: Fixed in …
- 12:24 Ticket #4516 (Installation program - Fix Linux RPM packages for version 1.12 and update webpage information) closed by
- fixed: As far as I can tell this ticket is fixed. Francesco, please check the …
- 12:22 Ticket #3691 (Backend - indexReduction doesn't reduce system with algebraic loop state constrains) closed by
- fixed: resolveLoops is now activated by default which should fix this ticket. …
- 12:21 Ticket #4535 (Backend - Structural singularity related to electric ground placement) updated by
- Thinking back about this issue, I believe the initial title is …
- 12:21 Ticket #4254 (Backend - Wrong numerical handling of conditional equations) updated by
-
Milestone changed
- 12:20 Ticket #4293 (Backend - Bad strategy to solve rational equations) updated by
-
Milestone changed
- 12:20 Ticket #4424 (FMI - Wrong ModelStructure in FMI 2 modelDescription.xml) updated by
-
Milestone changed
- 12:13 Ticket #1831 (Backend - SimCodeUtil.calculateIndex failed) closed by
- fixed: The message does not appear anymore and the function does not exist …
- 12:08 Ticket #2014 (Backend - Modelica.Electrical.Spice3.Examples.CascodeCircuit) closed by
- fixed
- 12:08 Ticket #2014 (Backend - Modelica.Electrical.Spice3.Examples.CascodeCircuit) updated by
-
Status, Owner changed
the issue has been adressed by evaluation of function calls. - 11:49 Ticket #1451 (Backend - Backend scaling for simple array-equation) updated by
- Yes, and these were the culprits of O(N2) memory consumption. I …
- 10:50 Ticket #4569 (Run-time - Implement single precision for matlab result files) created by
- According to a set of tests I made, the OM matlab output size with is …
- 10:36 Ticket #4553 (Backend - Wrong structural reporting in systems with complex array equations) updated by
- Sure, but in this case the removal of redundant euqations is part of …
- 10:12 Ticket #3915 (OMEdit - Rename feature missing in OMEdit) updated by
-
Priority changed
I am raising the priority of this feature to blocker for 2.0.0, … - 09:34 Ticket #4568 (Backend - compilation fails: why?) created by
- Not sure if this is the right place to ask: Thanks for testing the …
- 09:24 Ticket #4567 (OMEdit - Simulation Toolbar appears twice) created by
- For some reason I had the Simulation toolbar twice, and it appears …
- 08:50 Ticket #4566 (Command Prompt Environment - Deleting intermediate files from CLI) created by
-
It seems that
translateModelFMUremoves most of the intermediate … - 04:38 Ticket #1451 (Backend - Backend scaling for simple array-equation) updated by
-
So PR1900 simply avoids creating a new list for
absIntto treat … - 04:18 Ticket #4562 (FMI - Fix default nominal attribute in FMUs) closed by
- fixed
2017-10-14:
- 12:00 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
-
Status, Owner changed
- 12:00 Ticket #4551 (OMEdit - Do not allow connection of different connector types) reopened by
- @ceraolo I do agree with you that the description on the both tickets …
- 09:57 Ticket #4565 (OMEdit - Model building statistics in Omedit) created by
- OpenModelicaUsersGuide.pdf in section 1.2.5 shows simulation of a DC …
2017-10-13:
- 20:01 Ticket #4469 (OMEdit - OMEdit does not update diagrams of derived classes) updated by
- I checked with 1.12 beta2 and the issue is still there. BTW, It seems …
- 19:41 Ticket #3915 (OMEdit - Rename feature missing in OMEdit) updated by
- are any programs about this ticket? The OM usability would be greatly …
- 18:44 Ticket #4564 (Run-time - State machine tests fail with C run-time) created by
- The test suite contains two state machine tests …
- 17:55 Ticket #4563 (Frontend - State machine reset error) closed by
- fixed: I fixed the issue in OMC …
- 16:30 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
- Adeel, Sorry for awfully tampering with your comment. I didn't realise …
- 15:22 Ticket #4563 (Frontend - State machine reset error) created by
- Resetting of nested state machines does not work correctly. The …
- 14:30 Ticket #1451 (Backend - Backend scaling for simple array-equation) updated by
- I committed a fix for the huge memory consumption in …
- 13:43 Ticket #4562 (FMI - Fix default nominal attribute in FMUs) updated by
- Please also fix it in 1.12, I see no reason not to do it.
- 13:42 Ticket #4496 (New Instantiation - Complex 'sum' does not work) updated by
- Wow. I think we should remove the phrase: […] as it may scare off …
- 13:34 Ticket #4146 (*unknown* - Summary of omc scaling issues) updated by
-
Description changed
- 13:33 Ticket #1451 (Backend - Backend scaling for simple array-equation) updated by
-
Status, Description, Cc, Component, Owner changed
Update: with 1.12.0beta2, the current performance using OMEdit is … - 13:19 Ticket #4562 (FMI - Fix default nominal attribute in FMUs) updated by
-
Status, Owner changed
https://github.com/OpenModelica/OMCompiler/pull/1899 - 13:19 Ticket #4562 (FMI - Fix default nominal attribute in FMUs) created by
- Currently, the C-code sets nominal to 0.0 if there is no explicit …
- 11:59 Ticket #4496 (New Instantiation - Complex 'sum' does not work) updated by
- The following would work in …
- 11:55 Ticket #1283 (New Instantiation - Assigning matrices is terribly inefficient (unneeded expand)) updated by
- It only deals with (scalar?) records, but I guess it's pretty much the …
- 11:42 Ticket #4337 (OMEdit - OMEdit allows invalid connections) updated by
- I think the correctness of connections should be checked by the …
- 11:40 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) updated by
- With "hardcoding the factor" I mean: There is a ratio (a factor) …
- 11:38 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
- I guess what @ceraolo meant was that the discussion in this ticket is …
- 11:38 Ticket #4337 (OMEdit - OMEdit allows invalid connections) updated by
- See also the discussion in #4551
- 11:31 Ticket #1283 (New Instantiation - Assigning matrices is terribly inefficient (unneeded expand)) updated by
- Does this PR avoid calling the function NxM times?
- 09:06 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
- I don't see a difference between the two. A connection of different …
- 09:04 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) updated by
- Well that's what I thought earlier but then you said the factor could …
- 08:51 Ticket #4461 (OMEdit - OMEdit does not save additional simulation flags) reopened by
-
I made a bad fix by introducing a modifier
additionalSimulationFlags… - 08:26 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) reopened by
- 08:26 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) updated by
- Hi Adeel, I had spoken too soon. Unfortunately, the new behavior is …
- 05:15 Ticket #1283 (New Instantiation - Assigning matrices is terribly inefficient (unneeded expand)) updated by
- It's pretty similar to …
- 04:55 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) updated by
- Nice - I like that!
2017-10-12:
- 22:51 Ticket #4552 (Backend - EvaluateParameters scales as O(N^2) with large parameter arrays) updated by
- See also #1283
- 22:51 Ticket #4076 (*unknown* - Really bad performance with big tables) updated by
- See also #1283
- 22:50 Ticket #1283 (New Instantiation - Assigning matrices is terribly inefficient (unneeded expand)) updated by
-
Status, Component, Priority, Milestone, Owner, Type changed
This ticket is very old but still valid, if I flatten the model with … - 22:46 Ticket #1177 (*unknown* - Redesign and set up restrictions for simplication of expressions) updated by
-
Component changed
See #4293 - 22:15 Ticket #4559 (OMOptim - OmOptim is not starting in Linux) updated by
- […] It is linked against Qt5 and Qt4, which causes the crash. The …
- 20:03 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
- I don't think that this is duplicate of 4337. May I ask you to reopen …
- 19:02 Ticket #4559 (OMOptim - OmOptim is not starting in Linux) updated by
- I have not compiled OMOPtim myself. It is installed through the …
- 18:37 Tickets #2891,4372,4475,4215,4410,1883,2447,2499,2671,3287,4232,4337,4414,4469,4485,2777,4194,4288,4322,4369,4302 batch updated by
-
Milestone changed
- 18:31 Ticket #4551 (OMEdit - Do not allow connection of different connector types) closed by
- duplicate: See #4337.
- 18:26 Tickets #2421,4164,1839,2438 batch updated by
-
Milestone changed
- 18:25 Ticket #4253 (Backend - inverse in OM) updated by
- shabunin_a@…, please check and close the ticket if everything is …
- 18:23 Ticket #4308 (OMEdit - OMEdit: Snap to grid coarse modifier (shift key) and pan view (control key)) closed by
- fixed: Done in f627d1/OMEdit.
- 16:27 Ticket #4561 (Backend - Implement incomplete matching for under/overdetermined systems) closed by
- fixed
- 16:26 Ticket #4561 (Backend - Implement incomplete matching for under/overdetermined systems) updated by
-
Status, Owner changed
- 16:26 Ticket #4561 (Backend - Implement incomplete matching for under/overdetermined systems) reopened by
- 16:22 Ticket #4561 (Backend - Implement incomplete matching for under/overdetermined systems) closed by
- fixed: This was fixed in 24c3047c71/OMCompiler
- 16:21 Ticket #4561 (Backend - Implement incomplete matching for under/overdetermined systems) created by
- Perform an incomplete matching after producing the message unbalanced …
- 16:14 Ticket #4559 (OMOptim - OmOptim is not starting in Linux) updated by
- Using different Qt versions from an application will cause crashes. …
- 15:21 Ticket #4559 (OMOptim - OmOptim is not starting in Linux) updated by
- Did you compile this version yourself? From your backtrace it seems …
- 14:33 Ticket #4253 (Backend - inverse in OM) updated by
- There was a bug in the variable replacements. After fixing it in …
- 14:17 Ticket #4560 (Backend - BackendDAE.adjacencyRowEnhanced fails with array function) created by
- […] ErrorString: […]
- 12:36 Ticket #1889 (New Instantiation - Handle String and Integer operators in new instantiation) closed by
- fixed
- 12:36 Ticket #1890 (New Instantiation - Flatten classes in SCodeInst) closed by
- invalid
- 12:35 Ticket #1905 (New Instantiation - Propagate class modifiers) closed by
- fixed
- 12:35 Ticket #1927 (New Instantiation - Handle instantiation of builtin functions better in new instantiation) closed by
- fixed
- 12:34 Ticket #1916 (New Instantiation - Print an error for nonexisting redeclared modifier elements in extends.) closed by
- fixed
- 12:29 Tickets #3203,3274,4138,2856,3839,3845,4526,3221,3121 batch updated by
-
Component changed
Move all tickets from NF - New Frontend to New Instantiation so we … - 12:25 Ticket #4558 (New Instantiation - stackoverflow not caught) updated by
-
Owner, Component, Milestone changed
I added a minimal model in case anyone wants to look into this, but … - 11:59 Ticket #4559 (OMOptim - OmOptim is not starting in Linux) created by
- When I try to start OMOptim I get the following error message in …
- 11:14 Ticket #4553 (Backend - Wrong structural reporting in systems with complex array equations) updated by
- Replying to ptaeuber: > WrapFunctionCalls encapsulates the …
- 11:05 Ticket #4415 (OMEdit - package.order file is cleared after duplicate) updated by
- Can we close this ticket then or is the problem still to be solved in …
- 07:30 Ticket #4301 (Backend - Feature to break the simulation when the steady state has been reached) updated by
- The testcase added for this is not working: …
2017-10-11:
- 23:00 Ticket #4545 (Code Generation - Code generation for algorithms involving arrays broken in commit 453e1c7) closed by
- fixed: Fixed in …
- 15:18 Ticket #4558 (New Instantiation - stackoverflow not caught) created by
- When simulating the Butane models from HelmholtzMedia: …
- 14:06 Ticket #4490 (OMEdit - Display issues with Modelica Trunk) closed by
- fixed: Fixed in 47db56/OMEdit.
- 14:05 Ticket #4332 (OMEdit - OMEdit: polygon annotation: odd coordinates if more then two points ...) closed by
- fixed: Fixed in da6dc6/OMEdit.
- 07:48 Ticket #4554 (Interactive Environment - Internal error CevalScript.calculateSimulationSettings - can't run ...) updated by
-
Cc, Status, Component, Owner changed
- 07:09 Ticket #4525 (Backend - Wrong handling and unclear reporting of redundant initial equations) updated by
- @casella Can this one be closed?
- 07:07 Ticket #4553 (Backend - Wrong structural reporting in systems with complex array equations) closed by
- fixed
- 07:06 Ticket #4553 (Backend - Wrong structural reporting in systems with complex array equations) updated by
-
WrapFunctionCalls encapsulates the function
fand removes it in the … - 06:05 Ticket #3732 (*unknown* - Segmentation fault at zero mass flow rate) updated by
- I believe this comes from the code below […] Both arguments of the …
2017-10-10:
- 18:06 Ticket #4557 (OMEdit - Duplicate of packages is always saved as package in one file) created by
- When duplicating a package there is no option to choose whether is …
- 17:50 Ticket #4556 (OMEdit - Save disabled after duplicate) created by
- After using "duplicate" of a class or package into an existing package …
- 17:42 Ticket #4415 (OMEdit - package.order file is cleared after duplicate) updated by
-
Status, Owner changed
Fix in 1.11 not required. - 17:21 Tickets #4333,4404,4452,4417,4462,4345 batch updated by
-
Milestone changed
- 15:33 Ticket #3992 (*unknown* - A model to dynamically change network topology that does not work with OM) updated by
- A few notes: 1) my comment 3 was partially wrong since all the …
- 15:10 Ticket #4555 (OMEdit - Redundantly inherited parameters (diamond inheritance) appear multiple ...) created by
- When a model is built by extending superclasses with diamond …
- 14:14 Ticket #4038 (OMEdit - Dassl modifiers no longer in sync) closed by
- fixed: Fixed in 9fd2f4/OMEdit and ported to maintenance/v1.12.
- 13:54 Ticket #4542 (*unknown* - Performance issues with medium-sized linear systems) updated by
- Replying to ptaeuber: Thanks for the analysis, I agree on …
- 13:27 Ticket #4542 (*unknown* - Performance issues with medium-sized linear systems) updated by
- I did some investigations. The tearing is ok, I think. The problem is …
- 13:13 Ticket #4176 (OMEdit - Allow multi-line text in OMEdit) closed by
- invalid: Replying to casella: > Do you mean that when you drag and …
- 12:38 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
-
Milestone changed
Replying to dietmarw: > The creation of Top-level classes … - 11:41 Ticket #4356 (*unknown* - netCDF reader works on Linux, not on Windows) updated by
- Is there a way around that we can use meanwhile?
- 11:39 Ticket #4448 (Code Generation - ExternData library is not working in OpenModelica) updated by
- Any feedback?
- 10:39 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- The creation of Top-level classes works fine, the updating of relative …
- 10:34 Ticket #3274 (New Instantiation - Inheritance problems on power systems library) updated by
-
Status, Owner, Component, Milestone changed
All front end issues will be handled by the new front end. @perost, … - 10:31 Ticket #3981 (*unknown* - Simulation crashes in libstdc++-6.dll using ExternalMedia) updated by
-
Priority, Status, Owner, Milestone changed
- 10:01 Ticket #3122 (*unknown* - Error compiling from svn (cc1plus: error: unrecognized command line ...) closed by
- wontfix: There's been a lot of evolution with the QT libraries in OMC, so I …
- 09:52 Ticket #4554 (Interactive Environment - Internal error CevalScript.calculateSimulationSettings - can't run ...) created by
- Hello, I cannot launch simulation if I state stopTime / interval (or …
- 08:41 Ticket #3885 (Backend - inStream and Evaluate Parameter) updated by
-
Proposal:
-
inStreaminterduce -> posetiveMax(cref, eps) and … - 08:15 Ticket #3589 (New Instantiation - BuildingSystems library) updated by
- We are also looking into this issue here: …
- 08:05 Ticket #3885 (Backend - inStream and Evaluate Parameter) updated by
-
Note: some motivation to do simplification for
inStreamin Backend … - 07:13 Ticket #4546 (MetaModelica - MetaModelica JSON reader) closed by
- fixed
- 01:11 Ticket #3415 (*unknown* - Problems with fixedDelay) closed by
- wontfix: It is not possible to address your problem if you don't provide a test …
- 01:09 Ticket #3235 (*unknown* - Fix test cases with error messages that include line numbers from the ...) closed by
- wontfix: It seems like this ticket is totally obsolete
- 01:08 Ticket #3449 (*unknown* - OMEdit Crash when starting) updated by
- ben.haefele@…, do you still have this problem? I guess it has …
- 01:04 Ticket #3175 (*unknown* - Iinitialization doesn't converge even when near solution) closed by
- worksforme: Initializes correctly in OpenModelica-v1.13.0-dev-63-g453e1c7-64bit
- 01:01 Ticket #3221 (New Instantiation - Equation count of models containing expandable connectors) updated by
-
Status, Component, Milestone, Owner, Type changed
See #4138 under "Local balanced checking" - 00:59 Ticket #3121 (New Instantiation - Missing bindings in flattened operator overloading example) updated by
-
Status, Description, Component, Summary, Owner changed
OMEdit still crashes with this test case as of … - 00:43 Ticket #2942 (*unknown* - Beta2 vs Beta4: worsening performance and not convergence of a simulation) closed by
- fixed: With the latest OpenModelica-v1.13.0-dev-63-g453e1c7-64bit the model …
- 00:41 Ticket #3203 (New Instantiation - Lookup fails for partial function application and component modifier ...) updated by
-
Status, Component, Priority, Milestone, Owner changed
@perost, please check this works fine with newInst - 00:40 Ticket #3077 (Frontend - Error in parameter lookup) closed by
- duplicate: Duplicate of #2660
- 00:37 Ticket #3131 (*unknown* - constraint is a protected keyword with Optimica language extension) closed by
- fixed
- 00:35 Ticket #3097 (*unknown* - Relational operators give inconsistent results) closed by
- wontfix: I would classify this model as numerically ill-conditioned. When y …
- 00:28 Ticket #3046 (*unknown* - crash on open) closed by
- wontfix: Not enough info to address the problem. Likely fixed with 1.11.0 or 1.12.0.
- 00:24 Ticket #2821 (*unknown* - Library Save Bug) closed by
- fixed: This type of problems should have been fixed long time ago. Please …
- 00:21 Ticket #2910 (*unknown* - Saving model problems) closed by
- fixed: Such problems were solved many months ago with release 1.11.0.
- 00:06 Ticket #3554 (Installation program - Installation does not work on Windows) closed by
- duplicate: See #4504. We should fix this in release 1.13.0
- 00:04 Ticket #3618 (Installation program - Compiling From Source Fedora 23) closed by
- fixed: Fedora 25 has been officially supported for several months now. RPM …
2017-10-09:
- 23:59 Ticket #3661 (*unknown* - Add a resimulate() function to the API) updated by
-
Milestone, Summary changed
- 23:58 Ticket #3732 (*unknown* - Segmentation fault at zero mass flow rate) closed by
- worksforme: As of OMCompiler v1.12.0-dev.195+gd2bbe7a the following outcome is …
- 23:52 Ticket #3739 (*unknown* - Compilation errors for MSL trunk) updated by
-
Priority, Milestone changed
Replying to martin.otter@…: Update taken from … - 23:49 Ticket #3742 (Backend - Modelica.Fluid.Examples.HeatingSystem fails to translate since Feb 26) closed by
- wontfix: This ticket had a quite drastic evolution since it was first opened. …
- 23:36 Ticket #3750 (*unknown* - Compilation Problem for model modifier with constrainedby and inheritance) closed by
- worksforme: I tried this test case with OpenModelica-v1.13.0-dev-63-g453e1c7-64bit …
- 23:29 Ticket #3778 (*unknown* - noEvent(x>0) fails to guard against sqrt(x) for x<0) closed by
- worksforme: The reports in …
- 23:19 Ticket #3779 (Run-time - Wrong generated code for a model of the Buildings library) updated by
-
Milestone, Component, Summary changed
Looking at the report in … - 23:15 Ticket #3780 (*unknown* - wrong array dimension size unless Evaluate=true is set) closed by
- worksforme: https://test.openmodelica.org/libraries/Buildings/BuildModelRecursive.h …
- 23:11 Ticket #3789 (*unknown* - Missing variables in _info.json file) updated by
-
Priority, Status, Owner, Milestone changed
The problem is still there. Seven equations reported, but only five … - 23:07 Ticket #3806 (*unknown* - Undeclared Variable) closed by
- wontfix: It is not possible to investigate the issue further without a test …
- 23:06 Ticket #3834 (Frontend - Compiler type mismatch error when converting Real to Integer.) updated by
-
Component changed
Can you please provide a complete test model to reproduce the problem, … - 23:03 Ticket #3845 (New Instantiation - calling records to assign parameters fails if size is changed) updated by
-
Component changed
- 23:03 Ticket #3839 (New Instantiation - Medium.nC incorrectly set to 0 instead of 1.) updated by
-
Status, Owner, Component, Milestone changed
@perost can you make sure this works properly with the new front end? - 23:01 Ticket #3845 (New Instantiation - calling records to assign parameters fails if size is changed) updated by
-
Status, Owner, Milestone changed
@perost, can you make sure this works properly with the new front end? - 23:00 Ticket #3856 (*unknown* - Improve OM Performance) closed by
- fixed
- 22:59 Ticket #3885 (Backend - inStream and Evaluate Parameter) updated by
-
Status, Owner, Component, Milestone changed
Replying to perost: > Ok, I see. We use min/max to … - 22:38 Ticket #3889 (*unknown* - Allow both OM32 and OM64 to function on the same PC) closed by
- wontfix: I guess Windows 32-bit will inevitably be obsolete, so there's hardly …
- 22:35 Ticket #3901 (*unknown* - Template call failed) closed by
- wontfix: It is not possible to address the issue without a test case to …
- 22:33 Ticket #3968 (*unknown* - Windows 64-bit gcc seg fault on large models) closed by
- wontfix: Without a test case it is really not possible to address the problem. …
- 22:32 Ticket #3981 (*unknown* - Simulation crashes in libstdc++-6.dll using ExternalMedia) updated by
- See updates on https://github.com/modelica/ExternalMedia/wiki, and …
- 22:30 Ticket #3992 (*unknown* - A model to dynamically change network topology that does not work with OM) closed by
- worksforme: I tried with OpenModelica-v1.13.0-dev-63-g453e1c7-64bit, after …
- 22:17 Ticket #3993 (Backend - Back-end fails with MSL 3.2.2 TimeTable but works with MSL 3.2.1) updated by
- Replying to dersh: > I did just try to switch to MSL …
- 22:11 Ticket #4006 (Backend - SimCode scales as O(N^2) in models with many when clauses and events) updated by
-
Component changed
- 22:05 Ticket #4038 (OMEdit - Dassl modifiers no longer in sync) updated by
-
Priority, Status, Component, Owner, Milestone changed
As of OpenModelica-v1.13.0-dev-63-g453e1c7-64bit, OMEdit still uses … - 21:54 Ticket #4076 (*unknown* - Really bad performance with big tables) updated by
-
See also the recently added
TimeTable_N_XXXand … - 21:48 Ticket #4083 (*unknown* - On opening Modelica.Mechanics.Translational.Examples.Friction I get ...) closed by
- worksforme: I tried this out with OpenModelica-v1.13.0-dev-63-g453e1c7-64bit for …
- 21:44 Ticket #4092 (*unknown* - using ZeroMQ messaging instead of CORBA/omniORB?) closed by
- fixed: This is implemented in release 1.12.0, see …
- 21:36 Ticket #4115 (Backend - Clarify error message in the absence of voltage reference (ground)) updated by
-
Status, Owner, Component changed
Five years ago, I published a possible solution to this problem in a … - 21:30 Ticket #4119 (Backend - singulare model pass backend) updated by
- Replying to casella: > I'm not sure why the model is …
- 21:29 Ticket #4553 (Backend - Wrong structural reporting in systems with complex array equations) updated by
-
Cc, Status, Owner changed
- 21:29 Ticket #4553 (Backend - Wrong structural reporting in systems with complex array equations) created by
- Consider this test case […] …
- 21:18 Ticket #4119 (Backend - singulare model pass backend) closed by
- worksforme: I tried this with OpenModelica-v1.13.0-dev-63-g453e1c7-64bit. The …
- 21:09 Ticket #4118 (Backend - removeSimpleEquation failed) updated by
-
Milestone changed
- 21:09 Ticket #4118 (Backend - removeSimpleEquation failed) updated by
-
Owner, Component changed
- 21:06 Ticket #4120 (New Instantiation - Out-of-bounds array elements undetected by front-end) updated by
-
Status, Component, Summary, Priority, Milestone, Owner changed
Simpler test case: […] Only breaks during C-code simulation: […] … - 20:53 Ticket #4179 (*unknown* - compilation error when using multiple media) closed by
- worksforme: I tried it with OpenModelica-v1.13.0-dev-63-g453e1c7-64bit, the model …
- 20:38 Ticket #4150 (Installation program - Virtual Machine problems) updated by
-
Owner, Component changed
- 20:32 Ticket #4172 (Frontend - Medium propagation fails in ...) updated by
-
Priority, Component, Milestone changed
The model is opened successfully with the current nightly build, but … - 20:21 Ticket #4176 (OMEdit - Allow multi-line text in OMEdit) updated by
-
Owner, Component changed
Do you mean that when you drag and drop components the corresponding … - 19:58 Ticket #4216 (Backend - rework resolveLoops) updated by
-
Component changed
- 19:58 Ticket #4253 (Backend - inverse in OM) updated by
-
Status, Owner, Component, Milestone changed
I had a look on your example, using OMEdit and the Transformational … - 19:09 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- It should work fine with 3d141a/OMCompiler.
- 18:18 Ticket #4286 (OMEdit - A very frequent strange message in OMEdit (Mac OS)) updated by
-
Owner, Component, Milestone changed
- 18:16 Ticket #4298 (OMOptim - OMOptim build on linux amd64 failed due to gcc 6.0 bug 70129) updated by
-
Owner, Component changed
- 18:16 Ticket #4316 (*unknown* - Simulation of Modelica.Fluid.Examples.Pumpingsystem and HeatingSystem fail) updated by
-
Priority, Milestone changed
These models from MSL should definitely work in 2.0.0 - 18:12 Ticket #4390 (Documentation - Update solver simflags) updated by
-
Component changed
- 18:11 Ticket #4395 (Run-time - Importance of residual scaling for the proper operation of the Kinsol ...) updated by
-
Component changed
- 18:10 Ticket #4411 (Backend - Odd error-message for over-determined system) updated by
-
Owner, Component changed
- 18:08 Ticket #4516 (Installation program - Fix Linux RPM packages for version 1.12 and update webpage information) updated by
- I now updated the page with the same text as we have for the windows …
- 17:41 Ticket #2619 (Frontend - OpenModelica in git instead of svn) closed by
- fixed: OpenModelica development has been on Git for a while, and I'd say with …
- 17:14 Ticket #4290 (Frontend - bug/regression: nested expandable connectors cause error in new ...) closed by
- invalid: I tried this model with Dymola, after building a proper package file …
- 16:58 Ticket #4415 (OMEdit - package.order file is cleared after duplicate) updated by
- Oliver, can you please check if this is still the case with …
- 16:55 Ticket #3936 (OMOptim - problems with OMOptim) updated by
- Replying to vitalij: > You can use "command …
- 16:51 Ticket #3966 (Run-time - zero detection or array index error) updated by
-
Milestone changed
Moved to 1.13, no need to put this in a maintenance release. - 16:49 Ticket #4504 (Installation program - Respect the standards of Windows application installation) updated by
-
Milestone changed
Another issue (orginally reported in #3769 and #3554) is that some … - 16:48 Ticket #3769 (Installation program - Problem with GCC compiler on Windows 10 - OpenModelica 1.9.4 final rel) closed by
- wontfix: I don't see any reason to address this problem in a maintenance …
- 16:46 Ticket #3769 (Installation program - Problem with GCC compiler on Windows 10 - OpenModelica 1.9.4 final rel) updated by
-
Cc changed
Replying to adrpo: > In OMEdit you can change the working … - 16:31 Ticket #4147 (*unknown* - Installation on mac is aborted with error) closed by
- worksforme: Replying to dersh: > And the nightly for Mac has been …
- 16:17 Ticket #2079 (OMEdit - OMEdit does not handle replaceable classes and components) updated by
-
Milestone changed
@adrpo, can you quiclky summarize the status of this issue for the … - 15:18 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) updated by
-
Milestone changed
- 15:17 Ticket #2909 (Code Generation - Intermediate compilation files should be removed at the end of code ...) updated by
- For each model a separate directory is created and files are dumped in …
- 14:53 Ticket #4547 (OMEdit - Duplicate models should belong to the original model's package by default) closed by
- fixed: Done in 5422a2/OMEdit.
- 14:31 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
- I agree, that students often run into problems by connecting the wrong …
- 13:39 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
- > AFAIR we use to have this check but then dropped for #2450. If, …
- 13:08 Ticket #4472 (OMEdit - OMEdit corrupts files) updated by
- Replying to ceraolo: > The issue is fixed. > No need to …
- 13:01 Ticket #4146 (*unknown* - Summary of omc scaling issues) updated by
-
Description changed
- 13:00 Ticket #4552 (Backend - EvaluateParameters scales as O(N^2) with large parameter arrays) created by
- Thanks to Thomas Beutlich, we have recently added a new set of tests …
- 12:33 Ticket #4520 (Run-time - Lookup: how to start from top level) updated by
-
Milestone changed
- 12:32 Ticket #4521 (*unknown* - OM does not allow omitting a function output) updated by
-
Milestone changed
- 12:29 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
-
Version, Milestone changed
- 12:29 Ticket #4487 (OMOptim - OMOptim does not communicate with OMC) updated by
-
Version changed
- 12:27 Ticket #4528 (Code Generation - buildModelFMU doesn't respect the fileNamePrefix argument) updated by
-
Milestone changed
- 12:26 Ticket #4527 (Frontend - Clocked state machine run-time assert dimension error) updated by
-
Milestone changed
- 10:36 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- @Per I will try to debug and see where it is failing.
- 10:34 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- Hi I got the same not working example as @adeas31. On Ubuntu 16.04 …
- 10:31 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- Replying to adeas31: > The output of attached script is, …
- 10:29 Ticket #4546 (MetaModelica - MetaModelica JSON reader) updated by
-
Milestone changed
- 10:29 Ticket #4546 (MetaModelica - MetaModelica JSON reader) updated by
-
Status changed
- 10:27 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- The output of attached script is, […] Unfortunately it is not …
- 09:05 Ticket #3435 (Interactive Environment - Provide encryption/decryption for user libraries) updated by
- See also: https://trac.modelica.org/Modelica/ticket/1868
- 08:59 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- Note that one needs to warn the user when a relative path loses …
- 08:56 Ticket #4536 (Interactive Environment - OMEdit fails to update relative class names to absolute ones upon duplicate) updated by
- Replying to adeas31: > @Per Can you test why its failing. …
- 07:42 Ticket #4551 (OMEdit - Do not allow connection of different connector types) updated by
-
Cc changed
AFAIR we use to have this check but then dropped for #2450. We need to … - 05:03 Ticket #4516 (Installation program - Fix Linux RPM packages for version 1.12 and update webpage information) updated by
- I updated the script to not follow the Debian "stable" package, but …
Note:
See TracTimeline
for information about the timeline view.
