Timeline
2021-01-08:
- 16:48 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) updated by
- Probably a good idea. Should be discussed in a more global context. …
- 16:39 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) updated by
- OK, then the question is if we want OMEdit to actually be able to …
- 16:11 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) updated by
- It depends on situations. In some cases I think yes.
- 16:09 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) updated by
- OK. But does it actually make sense to have a graphical representation …
- 16:08 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) updated by
- Replying to adrpo: > I trained the spam filter with your …
- 16:06 Ticket #6337 (OMPython - OMPython openning files associates with non default OM libraries) closed by
- invalid: Please reopen if you need further feedback.
- 13:41 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Just in case it may be helpful I'll send privately to you a report on …
- 12:40 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) updated by
- Replying to adrpo: > I trained the spam filter with your …
- 12:37 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) updated by
- I trained the spam filter with your FMUs, please see if it works now. …
- 12:37 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) updated by
- Changing the suffix .fmu into .fmux was enough for uploading... You …
- 12:24 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) updated by
- Exactly active and reactive values for loads in an energetic systems …
- 12:17 Ticket #6334 (OMSimulator - Cannot handle medium/large size FMUs with OMSimulator) updated by
- I have just succeeded to upload a medium size FMU with: - 68 outputs, …
- 12:16 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) updated by
- This is strange, we set trac to trust authenticated users. If you are …
- 12:13 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) updated by
- Wow. I'm not sure we want to get there now, first we need to make sure …
- 12:06 Ticket #6334 (OMSimulator - Cannot handle medium/large size FMUs with OMSimulator) updated by
- Can you attach some of those FMUs to this ticket? How large are they?
- 11:43 Ticket #6337 (OMPython - OMPython openning files associates with non default OM libraries) updated by
- @jeduapf, you are using the ModelicaSystem Constructor with wrong …
- 11:24 Ticket #5240 (New Instantiation - NFEvalFunction.evaluateExternal is not yet implemented) updated by
- Replying to sjoelund.se: > We should add support for …
- 10:56 Ticket #6337 (OMPython - OMPython openning files associates with non default OM libraries) created by
- Hello, I am trying to open one file VSC_Test.mo that I developed …
- 10:35 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) updated by
- I cannot attach the FMU as the tool gives me this unpleasant message: …
- 10:32 Ticket #6336 (OMSimulator - Error when loading a simple Dymola FMU in an SSP model) created by
- I try to load a very light and simple Dymola FMU in an SSP model and I …
- 09:15 Ticket #6335 (OMSimulator - Cannot manage lots of FMU inputs/outputs in a SSP model with OmSimulator) created by
- At EDF we have some co-simulation graphs with FMUs having hundreds of …
- 09:00 Ticket #6334 (OMSimulator - Cannot handle medium/large size FMUs with OMSimulator) created by
- I try to use medium/large size FMUs in SSP models and simply to load …
- 08:15 Ticket #5240 (New Instantiation - NFEvalFunction.evaluateExternal is not yet implemented) updated by
- We should add support for external functions in newInst, provided that …
2021-01-07:
- 16:20 Ticket #6325 (New Instantiation - Support for ExternData) updated by
- Ah I see. OK that is a shame then since we are working on a MoConf …
- 15:08 Ticket #6333 (OMSimulator - Cannot define only once a FMU that is instantiated twice in a SSP model) updated by
-
Milestone changed
- 15:07 Ticket #6332 (OMSimulator - Cannot run a SSP model with 2 looped FMUs) updated by
-
Milestone changed
- 15:07 Ticket #6330 (OMSimulator - OMSimulator or SSP?) updated by
-
Milestone changed
Please go ahead. So far there hasn't been much usage of that feature, … - 15:04 Ticket #6317 (OMEdit - Autocompletion breaks after annotation(Dialog(tab = "Anything"))) updated by
- As we say in Italian, "al suo buon cuore", which roughly translates to …
- 15:02 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Replying to ceraolo: > Thank, you, Francesco, for your …
- 14:59 Ticket #6333 (OMSimulator - Cannot define only once a FMU that is instantiated twice in a SSP model) updated by
- Sorry better wording is: I don't know how to have only one copy of a …
- 14:53 Ticket #6333 (OMSimulator - Cannot define only once a FMU that is instantiated twice in a SSP model) created by
- I'm not able to instantiate only once a FMU that is to be logically …
- 14:36 Ticket #6332 (OMSimulator - Cannot run a SSP model with 2 looped FMUs) created by
- I try to solve a system of 2 equations / 2 unknowns, each equation …
- 14:16 Ticket #6330 (OMSimulator - OMSimulator or SSP?) updated by
- I have some troubles trying to build/use SSP systems. Do you want me …
- 14:05 Ticket #6330 (OMSimulator - OMSimulator or SSP?) updated by
-
Cc changed
@lochel, @adeas31, any comments on that? - 14:05 Ticket #6330 (OMSimulator - OMSimulator or SSP?) updated by
-
Status, Owner, Milestone changed
- 14:04 Ticket #6330 (OMSimulator - OMSimulator or SSP?) updated by
- Replying to jean-philippe.tavella@…: > I would try using …
- 13:59 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- OK, then let's stick to the master branch as it is now.
- 13:58 Ticket #6325 (New Instantiation - Support for ExternData) updated by
- I set it as a blocker for 2.0.0, which means, we have to take care of …
- 13:53 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- Replying to jean-philippe.tavella@…: > I work under …
- 10:39 Ticket #6331 (New Instantiation - [NF] Assigning parameters by external functions) updated by
-
Keywords changed
- 10:30 Ticket #6331 (New Instantiation - [NF] Assigning parameters by external functions) created by
- By the pull request by Perost, the external functions are now able to …
- 09:22 Ticket #6317 (OMEdit - Autocompletion breaks after annotation(Dialog(tab = "Anything"))) updated by
- @casella I doubt I remember enough context at the moment for this task …
2021-01-06:
- 15:48 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Thank, you, Francesco, for your unpaid, thoughtful analysis. I …
- 15:19 Ticket #6330 (OMSimulator - OMSimulator or SSP?) created by
- I would try using OMSimulator, but as I'm a boeotian user my first …
- 14:45 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- Replying to casella: > Sorry, my question was independend …
- 14:45 Ticket #6325 (New Instantiation - Support for ExternData) updated by
- The thing I'm interested here is what has to happen in order to be …
- 14:37 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- > That said, until …
- 14:35 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- Replying to casella: > Replying to [comment:5 …
- 14:33 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- Replying to jean-philippe.tavella@…: > There is no …
- 14:29 Ticket #6329 (New Instantiation - Array of Component) updated by
-
Status, Type, Component, Owner, Milestone changed
If you check the … - 14:11 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- Replying to casella: > The latest test is reported here: …
- 14:04 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- Replying to casella: > Coming to your specific issue, I …
- 13:58 Ticket #6262 (FMI - Incorrect start value for an input variable in an FMU exported from OM) updated by
- Replying to casella: > @jean-philippe, at some point you …
- 13:24 Ticket #6329 (New Instantiation - Array of Component) created by
- Hello, I want to use an array of component with different …
- 12:47 Ticket #6262 (FMI - Incorrect start value for an input variable in an FMU exported from OM) updated by
- @jean-philippe, at some point you should see a pull request by @lochel …
- 12:43 Ticket #6262 (FMI - Incorrect start value for an input variable in an FMU exported from OM) updated by
- Replying to jean-philippe.tavella@…: > Not solved with OM …
- 12:42 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
-
Cc, Owner, Component changed
Coming to your specific issue, I can confirm that we still get that … - 12:39 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- The latest test is reported here: …
- 12:21 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
- As far as I am concerned, I am all for it. Ultimately, it is up to …
- 12:20 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- Replying to jean-philippe.tavella@…: > I tested …
- 12:16 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
-
Cc changed
Replying to jean-philippe.tavella@…: > @Francesco: thank … - 09:29 Ticket #6262 (FMI - Incorrect start value for an input variable in an FMU exported from OM) updated by
- Not solved with OM 1.17.0-dev-315.
- 09:15 Ticket #6265 (*unknown* - assert() not correctly handled by OM: second case) updated by
- Can you reproduce the issue with PowerSysPro 1.4? Seem to be strange…
- 09:14 Ticket #6264 (Backend - An assert() is not correctly handled by OM: wrong violated equation) updated by
- Can you reproduce the issue with PowerSysPro 1.4? Seem to be strange…
- 09:09 Ticket #4232 (OMEdit - Make sure variables which are practically constant are displayed as ...) updated by
- Will this issue be solved or not? Basic users are only interested in …
- 09:00 Ticket #6232 (Backend - Questionable tearing in PowerSysPro leads to initialization failure) updated by
- Replying to casella: > This issue is currently being …
- 01:49 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Replying to ceraolo: > 1. two systems differing only …
2021-01-05:
- 16:31 Ticket #6328 (Backend - Support the homotopy() operator for the generation of symbolic ...) created by
-
Please run the MWE
Test1in the attached package with the … - 15:37 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Replying to casella: > Replying to ceraolo: …
- 10:42 Ticket #6326 (OMEdit - OMEdit changes to dark mode if Fedora changes to dark mode) updated by
- Guessing its because we don't force any style and use the system …
- 02:16 Ticket #6326 (OMEdit - OMEdit changes to dark mode if Fedora changes to dark mode) updated by
-
Cc, Milestone changed
- 02:03 Ticket #5813 (Backend - Improve selection of start attributes for alias variables) updated by
-
Cc, Component changed
I am currently working on test cases using the PowerGrids library. It …
2021-01-04:
- 23:53 Ticket #6327 (OMEdit - OMEdit crashes when unloading a library) created by
- I am developing a test library, that I need to unload and reload …
- 22:52 Ticket #6326 (OMEdit - OMEdit changes to dark mode if Fedora changes to dark mode) created by
- When I change the Gnome theme in Fedora to dark theme, OMEdit becomes …
- 15:05 Ticket #5805 (OMEdit - Homotopy logging does not work together with nonlinear solver logging ...) reopened by
- I am currently working on large power grid models for my presentation …
- 14:49 Ticket #6325 (New Instantiation - Support for ExternData) updated by
-
Status, Owner, Component, Milestone changed
@dietrmarw, I guess this is because of #5240. Apparently, your data … - 12:48 Ticket #6325 (New Instantiation - Support for ExternData) created by
- When trying to test/verify an example from …
- 01:43 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- The weird thing it that I don't see this issue, but I guess it's the …
2021-01-03:
- 22:40 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- Thank you! The suggested workaround worked for me. I had already tried …
- 21:00 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to stephan.fevrier: > With some Email support …
- 19:45 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- With some Email support from martin sjoelund I could resolve the issue …
- 15:39 Ticket #6324 (NF API - Issue with NF API) created by
-
While working with the
PowerGridslibrary in OMEdit, at some … - 11:52 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- Replying to ceraolo: > The system during the simulation …
- 11:40 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
- Replying to ceraolo: > Well, maybe it was not a good idea …
- 11:31 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
-
Priority, Status, Component, Owner, Milestone changed
- 11:31 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- This could be an issue with recent changes to the NF API. Please go to …
- 11:25 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- @xiang.wang, if you are facing other such weird problems, please try …
- 10:02 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
- sorry, your models are not identical. In ScTT you changed the …
- 04:17 Ticket #6323 (*unknown* - Adding sensors changes results) updated by
-
Description changed
- 04:13 Ticket #6323 (*unknown* - Adding sensors changes results) created by
- The Test1.mo needs PowerGrids to run. It contains models ScTT and …
- 03:58 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) closed by
- wontfix: Well, maybe it was not a good idea to combine different issues in the …
- 03:43 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) updated by
- On windows 64-bit, I should add.
- 03:42 Ticket #6322 (NF API - Modelica.Fluid.Sensors.Pressure seems to have no fluid port) created by
- In my new installation of 1.16.2, it seems like the …
- 01:29 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to casella: > > Please check Tools | Options | …
- 00:56 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to casella: > Replying to [comment:10 …
2021-01-02:
- 19:36 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to Bruno PERMANNE <bruno.permanne@…>: > As you …
- 19:25 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- I think there is no problem with de pathnames. I have attached two …
- 19:17 Ticket #6321 (OMEdit - Add the Reload feature in OMEdit) created by
- When working with OpenModelica and other tools (including a text …
- 18:52 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to Bruno PERMANNE <bruno.permanne@…>: > Hello, > …
- 18:36 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
- @ceraolo, I suspect that the two examples converge to different …
- 17:59 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Hello, As an old programmer, I never use pathname with non-ASCII …
- 17:51 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
-
Fixed
Test.moto actually use the embeddedSupportpackage. - 17:31 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
-
Cc changed
Replying to xiang.wang@…: > for 1.16.0-64bit the same … - 16:17 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) updated by
-
Description changed
- 10:46 Ticket #6320 (*unknown* - Wrong result in a realistic, PowerGrids-based example) closed by
- invalid
- 10:45 Ticket #6320 (*unknown* - Wrong result in a realistic, PowerGrids-based example) created by
- The attached OM.png and Dymola.png show variable IPu as obtained using …
- 10:44 Ticket #6319 (*unknown* - Wrong result in a realistic, PowerGrids-based example) created by
- The attached OM.png and Dymola.png show variable IPu as obtained using …
- 02:14 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- Replying to casella: > I tried to reproduce the issue on …
2021-01-01:
- 10:28 Ticket #6307 (NF API - Components views changed in v1.16.2) updated by
- "Maybe you have some other setting that is interfering badly with …
Note:
See TracTimeline
for information about the timeline view.
